PIC18LF24J11-I/SP - 8-Bit 48MHz 16KB Flash XLP MCU | Microchip
N.º da peça: PIC18LF24J11-I/SP ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.92 | $3,92 |
| 10 | $3.53 | $35,30 |
| 100 | $3.14 | $314,00 |
| 500 | $2.85 | $1.425,00 |
| 1.000 | $2.55 | $2.550,00 |
PIC18LF24J11-I/SP Visão geral
A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and integrated peripherals. The PIC18 family uses Microchip's enhanced RISC architecture with a Harvard-style memory layout, separating program (Flash) and data (RAM) buses for predictable instruction execution. Within Microchip's taxonomy, the PIC18LF24J11 sits at the intersection of 8-bit MCU -> Flash MCU -> nanoWatt XLP -> PIC18J-series, giving engineers a balance of code density, peripheral flexibility, and sub-microamp sleep current. The 'J' series specifically targets cost-sensitive applications requiring deep-sleep current as low as 20nA typical, making it ideal for always-on sensor nodes.
Key features include 16KB (8K x 16) Flash program memory, 3.68KB data RAM, 16 programmable I/O pins, and Peripheral Pin Select (PPS) for flexible signal routing. The 48MHz internal oscillator (equivalent to 12 MIPS throughput) eliminates external crystal requirements in many designs, while the 10-bit ADC with up to 10 channels supports direct sensor interfacing. Deep-sleep current of approximately 20nA extends battery life in dormant IoT endpoints, and the on-chip 2.5V/3.3V LDO regulator allows direct connection to a single Li-ion cell or two AA cells.
Architecturally, the PIC18LF24J11 uses a 16-bit instruction word optimized for C-compiled code density, with 31-level hardware stack and interrupt-priority arbitration. The nanoWatt XLP feature set includes multiple low-power modes (Run, Idle, Sleep, Deep Sleep), enabling dynamic power scaling based on application workload. JTAG/ICSP debugging is supported through standard 2-wire or 4-wire interfaces.
Typical applications include battery-powered sensor nodes, IoT edge devices, low-energy wireless sensor hubs, portable medical monitors, remote controls, energy harvesting systems, consumer electronics with sleep-dominant duty cycles, and industrial control modules requiring extended battery life. The 28-pin SPDIP package supports hand-soldering and breadboard prototyping, which suits engineers transitioning from development to small-batch production.
When designing with this device, choose the LF variant for sub-3.3V operation; switch to the standard F variant (e.g. PIC18F24J11-I/SP) for 3.3V-only or 5V-tolerant applications. Maintain VDD decoupling within 5mm of the supply pin (100nF plus 10uF bulk) and respect the absolute maximum VDD of 3.6V for LF parts to avoid latch-up.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, including a curated comparison against same-family SPDIP variants and a 28-pin cross-reference matrix.
Alternativas drop-in para PIC18LF24J11-I/SP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC18LF24J11-I/SP (mesmo formato e footprint) — diferindo em Package, Core Architecture, Operating Temperature, ADC, Maximum CPU Speed.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC18LF24J10-I/SP
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.18 / unidade
Ver ficha técnica →PIC18LF24J11-I/SO
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC18LF24J11-I/ML
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$1.95 / unidade
Ver ficha técnica →PIC18F24J11-I/SP
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC18LF24J11T-I/SP
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC18LF2431-I/SP
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.4 / unidade
Ver ficha técnica →PIC18LF24J11-I/SP Classificações máximas e características elétricas
| Core Processor | PIC |
| Core Size | 8-Bit |
| Frequência máxima de clock | 48 MHz |
| Instruction Throughput | 12 MIPS |
| Program Memory Size | 16 KB (8K x 16) Flash |
| Data RAM Size | 3.68 KB |
| ADC Resolution | 10 bit |
| Number of I/O Pins | 16 |
| Tensão de alimentação de operação | 2.0 V to 3.6 V |
| Minimum Operating Temperature | -40 C |
| Maximum Operating Temperature | +85 C |
| Encapsulamento | 28-SPDIP (SP) |
| Estilo de montagem | Through Hole |
| Connectivity | I2C, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Series | PIC XLP 18J |
| Largura do barramento de dados | 8 bit |
| Status RoHS | Compliant |
Configuração de pinos do PIC18LF24J11-I/SP
| Pino 1 | MCLR/VPP/RE3 — Master Clear / Programming voltage / I/O pin RE3 |
| Pino 2 | RA0/AN0 — Digital I/O RA0 / Analog input AN0 |
| Pino 3 | RA1/AN1 — Digital I/O RA1 / Analog input AN1 |
| Pino 4 | RA2/AN2/VREF- — Digital I/O RA2 / Analog input AN2 / ADC VREF- |
| Pino 5 | RA3/AN3/VREF+ — Digital I/O RA3 / Analog input AN3 / ADC VREF+ |
| Pino 6 | RA4 — Digital I/O RA4 |
| Pino 7 | RA5/AN4 — Digital I/O RA5 / Analog input AN4 |
| Pino 8 | VSS — Ground reference |
| Pino 9 | OSC1/CLKI/RA7 — Crystal oscillator input / external clock / I/O RA7 |
| Pino 10 | OSC2/CLKO/RA6 — Crystal oscillator output / clock output / I/O RA6 |
| Pino 11 | RC0 — Digital I/O RC0 |
| Pino 12 | RC1 — Digital I/O RC1 |
| Pino 13 | RC2 — Digital I/O RC2 |
| Pino 14 | RC3 — Digital I/O RC3 |
| Pino 15 | RC4 — Digital I/O RC4 |
| Pino 16 | RC5 — Digital I/O RC5 |
| Pino 17 | RC6 — Digital I/O RC6 |
| Pino 18 | RC7 — Digital I/O RC7 |
| Pino 19 | VSS — Ground reference |
| Pino 20 | VDD — Positive supply voltage |
| Pino 21 | RB0/AN12 — Digital I/O RB0 / Analog input AN12 |
| Pino 22 | RB1/AN10 — Digital I/O RB1 / Analog input AN10 |
| Pino 23 | RB2/AN8 — Digital I/O RB2 / Analog input AN8 |
| Pino 24 | RB3/AN9 — Digital I/O RB3 / Analog input AN9 |
| Pino 25 | RB4/AN11 — Digital I/O RB4 / Analog input AN11 |
| Pino 26 | RB5/AN13 — Digital I/O RB5 / Analog input AN13 |
| Pino 27 | RB6/PGC — Digital I/O RB6 / ICSP clock |
| Pino 28 | RB7/PGD — Digital I/O RB7 / ICSP data |
Aplicações típicas
PIC18LF24J11-I/SP é adequado para 6 aplicaçãos: Battery-Powered IoT Sensor Nodes, Portable Medical Monitoring Devices, Energy Harvesting Wireless Switches, Industrial Sensor Hubs and Remote Terminals, Consumer Remote Controls and HIDs, Automotive Interior Accessories.
Battery-Powered IoT Sensor Nodes
The PIC18LF24J11-I/SP's nanoWatt XLP technology with approximately 20nA typical deep-sleep current makes it ideal for battery-powered IoT sensor nodes. The 2.0V minimum VDD allows direct operation from a single CR2032 coin cell or two AA alkaline cells without boost conversion. The integrated 10-bit ADC supports up to 10 analog input channels for temperature, humidity, or gas sensors, while I2C and SPI peripherals connect to low-power radios like LoRa or BLE modules. Deep-sleep mode with wake-on-interrupt enables multi-year battery life in duty-cycled sensing applications such as smart agriculture or building automation.
Recomendado
Portable Medical Monitoring Devices
The PIC18LF24J11-I/SP is well suited for portable medical monitors requiring extended battery life and reliable low-voltage operation. Its 2.0V-3.6V VDD range allows direct Li-ion cell operation, while 12 MIPS throughput supports real-time signal processing for pulse oximetry, blood pressure, or glucose monitoring peripherals. The 10-bit ADC captures analog signals from optical or electrochemical sensors with adequate resolution for clinical-grade measurements. Brown-out detect and watch-dog timer provide safety-critical reliability, while the industrial -40C to +85C temperature range supports bedside and ambulatory deployment.
Recomendado
Energy Harvesting Wireless Switches
For energy harvesting applications such as self-powered wireless light switches or remote controls, the PIC18LF24J11-I/SP's 20nA deep-sleep current and 2.0V minimum VDD enable operation from harvested kinetic or RF energy. The internal 2.5V/3.3V LDO regulates the harvested supply to clean logic levels for the MCU and attached radio. With Peripheral Pin Select and PWM, the same MCU can debounce mechanical inputs, generate RF transmission frames, and drive indicator LEDs. The 16KB Flash accommodates complete wireless protocol stacks such as EnOcean or custom sub-GHz protocols.
Recomendado
Industrial Sensor Hubs and Remote Terminals
The PIC18LF24J11-I/SP's industrial -40C to +85C temperature range and robust 16-bit instruction set make it suitable for industrial sensor hubs and remote terminal units. The 48MHz internal oscillator eliminates external crystal requirements in many designs, reducing BOM cost and improving reliability in vibration-prone environments. UART/USART connectivity supports RS-232, RS-485, or Modbus communication with industrial sensors and PLCs, while the 10-bit ADC integrates 4-20mA analog sensor inputs directly. Brown-out detect and WDT ensure reliable operation in electrically noisy factory environments.
Recomendado
Consumer Remote Controls and HIDs
The PIC18LF24J11-I/SP fits consumer remote controls and human interface devices (HIDs) where battery life dominates the BOM. Its 2.0V-3.6V VDD range supports single-coin-cell operation, and 20nA deep-sleep current keeps standby drain negligible. PWM peripherals drive IR LEDs or haptic feedback, while the integrated 10-bit ADC can read battery voltage for low-battery detection without external components. With 16KB Flash and 3.68KB RAM, the MCU accommodates complete IR or RF protocol stacks plus user-customizable button mapping.
Recomendado
Automotive Interior Accessories
Although not AEC-Q100 qualified, the PIC18LF24J11-I/SP can serve automotive interior accessory applications such as ambient lighting controllers, USB charging port logic, and cabin sensor nodes operating from a regulated 3.3V rail. The 48MHz performance supports LED PWM dimming and capacitive touch sensing through the integrated 10-bit ADC and peripheral pin select. Designers should note the industrial temperature grade (-40C to +85C) covers most cabin environments; for under-hood AEC-Q100 requirements, pair with PIC18F25K22-I/SP instead. The 28-SPDIP package is breadboard-friendly for prototyping.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC18LF24J11-I/SP — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC18LF24J10-I/SP | PIC18LF24J11-I/SO | PIC18LF24J11-I/ML | PIC18F24J11-I/SP | PIC18LF24J11T-I/SP | PIC18LF2431-I/SP |
|---|---|---|---|---|---|---|---|
| Package | 28-SPDIP (SP) | 28-SPDIP - same | 28-SOIC - drop-in (SMT) | 28-QFN - drop-in (SMT) | 28-SPDIP - same | 28-SPDIP - same | 28-SPDIP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Operating Voltage | 2.0V to 3.6V (LF) | 2.0V to 3.6V (LF) | 2.0V to 3.6V (LF) | 2.0V to 3.6V (LF) | 2.0V to 3.6V (F, 3.3V optimized) | 2.0V to 3.6V (LF) | 2.0V to 5.5V (LF) |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Data RAM | 3.68 KB | 3.68 KB | 3.68 KB | 3.68 KB | 3.68 KB | 3.68 KB | 768 B |
| Maximum Clock | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 40 MHz |
| ADC Resolution | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit | 10-bit |
| Operating Temperature | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| Deep Sleep Current | ~20 nA typical | ~20 nA typical | ~20 nA typical | ~20 nA typical | ~20 nA typical | ~20 nA typical | ~50 nA typical |
Principais diferenciais
- Sub-3.3V optimized low-voltage operation (vs PIC18F24J11-I/SP)
- Higher RAM vs older J-series MCUs (vs PIC18LF2431-I/SP)
- Lower cost vs K-series alternatives (vs PIC18LF23K22-I/SP)
Notas de projeto
Place a 100nF ceramic decoupling capacitor within 5mm of each VDD pin (pins 11 and 20) and a single 10uF bulk capacitor near the MCU supply rail. The LF variant's 2.0V minimum VDD allows direct Li-ion cell operation, but adding a ferrite bead in series with VDD reduces conducted EMI from switching peripherals. For battery-powered designs, route MCLR (pin 1) through a 10kohm pull-up to VDD to prevent unintended resets during brown-out events.
The 28-SPDIP package has 2.54mm (100-mil) pin pitch compatible with standard 0.1-inch prototyping breadboards and through-hole PCB layouts. For mixed-signal applications, place analog signals (AN0-AN13) on the left side (RA/RB pins 2-7, 21-26) and digital signals on the right side (RC pins 11-18). Keep the analog AVSS pin tied directly to a low-impedance ground plane, not to digital ground. The exposed thermal pad on the QFN variant (PIC18LF24J11-I/ML) must be soldered to a continuous ground pour for thermal dissipation.
Do not exceed 3.6V VDD absolute maximum on the LF variant; latch-up can occur above ~4V. The Peripheral Pin Select (PPS) feature must be configured in firmware before digital peripherals function on non-default pins; failure to configure PPS is a common source of 'no communication' debugging sessions. Brown-out reset must be enabled in configuration bits for reliable LF operation below 2.5V. When migrating from F to LF variant, verify all I/O pull-up voltages match the LF 3.6V maximum rating.
Estimated: with the internal 48MHz oscillator, traces longer than ~25mm carrying CCP or PWM outputs may emit harmonics in the 100-200MHz range. Use series ferrite beads or 33ohm damping resistors on PWM outputs driving external FETs or LEDs to reduce ringing. For SPI communication above 10MHz, keep traces matched within 2mm and add 10kohm pull-ups on the chip-select line to prevent false triggering.
Informações de conformidade
RoHS and REACH compliance per Microchip product page and Abacus Technologies distributor listing. Not AEC-Q100 qualified; for automotive designs use PIC18F25K22-I/SP or similar AEC-Q100 part. Halogen-free status not explicitly stated in verified data.
