PIC24FJ16GA004T-I/PT - 16KB Flash 16-bit MCU | Microchip
N.º da peça: PIC24FJ16GA004T-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.55 | $3,55 |
| 10 | $3.2 | $32,00 |
| 100 | $2.78 | $278,00 |
| 500 | $2.45 | $1.225,00 |
| 1.000 | $2.12 | $2.120,00 |
PIC24FJ16GA004T-I/PT Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one die. The PIC24F family sits in the 16-bit segment of the Microchip PIC portfolio, positioned between the 8-bit PIC16/PIC18 and the 32-bit PIC32MX. It uses a modified Harvard architecture with separate program and data buses, optimized for deterministic interrupt response and C-compiler efficiency. Within that hierarchy, the PIC24FJ16GA004T-I/PT is the 16 KB Flash, 44-pin variant of the GA004 family.
Key differentiating features include 35 general-purpose I/O pins, multiple analog and digital peripherals, the 4x PLL that lets the internal 8 MHz oscillator reach the full 32 MHz instruction rate, and C compiler optimization support that allows efficient use of the MPLAB XC16 toolchain. The 17-bit by 17-bit single-cycle multiplier accelerates DSP-class math.
Technical depth: the part uses a 5.5K x 24-bit Flash organization that gives a true 16 KB of linear instruction space, while 4 KB of RAM is split between general-purpose SRAM and the system stack. Hardware multiply/divide is single-cycle, and the 32 MHz core delivers 16 MIPS. A peripheral pin select (PPS) function allows many digital peripherals to be remapped to a wide choice of I/O pins, simplifying board layout.
Typical applications include industrial control panels, automotive body and HVAC modules (note: automotive grade requires special ordering codes per the Microchip product page), USB device or human-interface nodes using the on-chip USB transceiver on related GA004 family members, and low-cost general-purpose 16-bit embedded platforms. The automotive recommendation from Microchip makes it a candidate for non-safety in-cabin modules.
When designing with this MCU, ensure the JTAG/ICD interface is brought to a header for MPLAB ICD programming and debugging, and respect the 3.0 V to 3.6 V Vdd range. Pin-compatible migration paths exist within the PIC24FJ64GA004 family for users who later need more code space.
This page synthesizes distributor stock and pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para PIC24FJ16GA004T-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24FJ16GA004T-I/PT (mesmo formato e footprint) — diferindo em Package, ADC, Core Architecture, Internal Oscillator, Program Memory (Flash).
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC24FJ16GA004-I/PT
✅ Drop-In✓ Em estoque
$2.1 / unidade
Ver ficha técnica →PIC24FJ16GA004-E/PT
✅ Drop-In✓ Em estoque
$2.95 / unidade
Ver ficha técnica →PIC24FJ32GA004-I/PT
✅ Drop-In✓ Em estoque
$2.55 / unidade
Ver ficha técnica →PIC24FJ64GA004-I/PT
✅ Drop-In✓ Em estoque
$3.3 / unidade
Ver ficha técnica →PIC24FJ128GA006-I/PT
✅ Drop-In✓ Em estoque
$4.95 / unidade
Ver ficha técnica →PIC24FJ128GB410-I/PT
✅ Drop-In✓ Em estoque
$3.15 / unidade
Ver ficha técnica →PIC24FJ64GA004-E/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24FJ16GA004T-I/PT Classificações máximas e características elétricas
| Product Family | PIC24F |
| Core Architecture | 16-bit Modified Harvard |
| CPU Speed | 32 MHz (16 MIPS) |
| Program Memory | 16 KB Flash (5.5K x 24) |
| Data RAM | 4 KB |
| I/O Pins | 35 |
| Tensão de alimentação | 2.0 V to 3.6 V |
| Internal Oscillator | 8 MHz with 4x PLL and multiple divide options |
| Hardware Multiplier | 17-bit x 17-bit single-cycle |
| Hardware Divider | 16-bit |
| Encapsulamento | 44-pin TQFP (10x10 mm) |
| Temperatura de operação | -40C to +85C (Industrial) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Code Execution Rate | 16 MIPS |
| C Compiler Support | MPLAB XC16 optimized |
Configuração de pinos do PIC24FJ16GA004T-I/PT
| Pino 1 | RP15/CN21/PMBE/RB15 — Remappable I/O, change notification, PMP byte enable |
| Pino 2 | VREF-/CVREF-/AN1 — ADC reference low / analog input |
| Pino 3 | VREF+/CVREF+/AN0 — ADC reference high / analog input |
| Pino 4 | RA8/AN8 — PORTA digital I/O, analog input 8 |
| Pino 5 | RA9/AN9 — PORTA digital I/O, analog input 9 |
| Pino 6 | RA10/CVREF — PORTA digital I/O, comparator voltage reference |
| Pino 7 | RA11/AN11 — PORTA digital I/O, analog input 11 |
| Pino 8 | VDD — Positive supply (2.0 V to 3.6 V) |
| Pino 9 | VSS — Ground reference |
| Pino 10 | RA12/AN12 — PORTA digital I/O, analog input 12 |
| Pino 11 | RA13/AN13 — PORTA digital I/O, analog input 13 |
| Pino 12 | RA14/AN14 — PORTA digital I/O, analog input 14 |
| Pino 13 | RA15/AN15 — PORTA digital I/O, analog input 15 |
| Pino 14 | OSC1/CLKI/RC12 — Crystal input or external clock |
| Pino 15 | OSC2/CLKO/RC15 — Crystal output or clock output |
| Pino 16 | PGED1/RP0/CN4/RB0 — ICSP data, remappable I/O |
| Pino 17 | PGEC1/RP1/CN5/RB1 — ICSP clock, remappable I/O |
| Pino 18 | PGED2/RP2/CN6/RB2 — ICSP data alt, remappable I/O |
| Pino 19 | PGEC2/RP3/CN7/RB3 — ICSP clock alt, remappable I/O |
| Pino 20 | RP4/CN8/RB4 — Remappable I/O |
| Pino 21 | RP5/CN9/RB5 — Remappable I/O |
| Pino 22 | RP6/CN10/RB6 — Remappable I/O |
| Pino 23 | RP7/CN11/RB7 — Remappable I/O |
| Pino 24 | RP8/CN12/RB8 — Remappable I/O |
| Pino 25 | RP9/CN13/RB9 — Remappable I/O |
| Pino 26 | VDD — Positive supply (2.0 V to 3.6 V) |
| Pino 27 | VSS — Ground reference |
| Pino 28 | RP10/CN14/RB10 — Remappable I/O |
| Pino 29 | RP11/CN15/RB11 — Remappable I/O |
| Pino 30 | RP12/CN16/RB12 — Remappable I/O |
| Pino 31 | RP13/CN17/RB13 — Remappable I/O |
| Pino 32 | RP14/CN18/RB14 — Remappable I/O |
| Pino 33 | D-/RG3 — USB D- or PORTG I/O |
| Pino 34 | D+/RG2 — USB D+ or PORTG I/O |
| Pino 35 | VBUS/RG1 — USB VBUS detect or PORTG I/O |
| Pino 36 | VDD — Positive supply (2.0 V to 3.6 V) |
| Pino 37 | ENVREG/RG0 — Enable voltage regulator / PORTG I/O |
| Pino 38 | RC1/T1CK — PORTC I/O, Timer1 clock |
| Pino 39 | RC2/AN6 — PORTC I/O, analog input 6 |
| Pino 40 | RC3/AN7 — PORTC I/O, analog input 7 |
| Pino 41 | RC4/AN4 — PORTC I/O, analog input 4 |
| Pino 42 | VSS — Ground reference |
| Pino 43 | RC13/SOSCO — PORTC I/O, secondary oscillator output |
| Pino 44 | RC14/SOSCI — PORTC I/O, secondary oscillator input |
Aplicações típicas
PIC24FJ16GA004T-I/PT é adequado para 6 aplicaçãos: Industrial Control Panels, Automotive Body and HVAC Modules, USB Human-Interface Devices, Low-Cost 16-bit Embedded Platforms, Battery-Powered Sensor Nodes, Consumer Appliance Control.
Industrial Control Panels
The PIC24FJ16GA004T-I/PT is a strong fit for industrial control-panel HMIs and machine controllers because it provides 35 I/O, 16 MIPS of compute, and 16 KB of Flash at a price point typical of mid-range control nodes. Its 8 MHz internal oscillator with 4x PLL eliminates the need for external crystals on cost-sensitive panels, while 4 KB of RAM holds protocol stacks such as Modbus RTU. Industrial -40C to +85C operating temperature matches cabinet environments, and the 16-bit core can drive ADC sampling, PWM outputs, and UART-controlled peripherals concurrently.
Recomendado
Automotive Body and HVAC Modules
The PIC24FJ16GA004T-I/PT is recommended by Microchip for automotive body and HVAC designs where AEC-Q100 is not required for the in-cabin module, or where the designer will order the automotive-grade ordering code. The PIC24F core delivers deterministic interrupt latency for switch debouncing and PWM fan control, while 16 KB Flash accommodates typical HVAC firmware plus a bootloader. Per the Microchip product page, special ordering codes for automotive-grade versions apply, so designers must use the correct part suffix when targeting AEC-Q100 production.
Recomendado
USB Human-Interface Devices
The PIC24FJ16GA004T-I/PT integrates an on-chip USB 2.0 full-speed transceiver and SIE on the GA004 die, so it can present itself as a USB HID, CDC, or vendor device without an external PHY. The 16 MIPS core handles HID report parsing and LED animation concurrently, and 16 KB Flash fits the USB stack plus application code for keyboards, pointers, or custom peripherals. PPS allows flexible USB-D+/D- pin assignment for board routing around connectors.
Recomendado
Low-Cost 16-bit Embedded Platforms
The PIC24FJ16GA004T-I/PT targets cost-sensitive embedded platforms that need 16-bit compute, generous I/O, and modern peripherals at the bottom of the PIC24F price stack. 35 I/O, 16 MIPS, 16 KB Flash, and 4 KB RAM cover generic sensor aggregation, low-rate data logging, and UI control tasks. The MPLAB XC16 C compiler optimization makes firmware portable across the GA004 family, easing code reuse on later designs.
Recomendado
Battery-Powered Sensor Nodes
The PIC24FJ16GA004T-I/PT supports sleep and idle modes with low current draw, and its 2.0 V to 3.6 V Vdd range accepts a single Li-ion or two AA cells directly. The 17-bit single-cycle multiplier accelerates sensor-fusion algorithms for temperature, pressure, and humidity nodes, while 4 KB RAM accommodates smoothing filters and short event buffers. The internal 8 MHz oscillator removes the quiescent current of an external crystal, extending battery life.
Recomendado
Consumer Appliance Control
The PIC24FJ16GA004T-I/PT fits white-goods and small-appliance control boards where 16 MIPS, 16 KB Flash, and 35 I/O deliver enough headroom for motor drivers, keypad scanning, and triac-based phase control. The industrial -40C to +85C grade handles kitchen and laundry environments, and the same TQFP-44 footprint is shared across the GA004 family so designers can drop in 32 KB or 64 KB Flash variants without PCB changes.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24FJ16GA004T-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24FJ16GA004-I/PT | PIC24FJ16GA004-E/PT | PIC24FJ32GA004-I/PT | PIC24FJ64GA004-I/PT | PIC24FJ128GA006-I/PT |
|---|---|---|---|---|---|---|
| Package | 44-TQFP (10x10 mm) | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same | 44-TQFP (10x10 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| Flash Memory | 16 KB | 16 KB | 16 KB | 32 KB | 64 KB | 128 KB |
| Data RAM | 4 KB | 4 KB | 4 KB | 4 KB | 8 KB | 8 KB |
| CPU Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +125C (Extended) | -40C to +85C | -40C to +85C | -40C to +85C |
| I/O Pins | 35 | 35 | 35 | 35 | 35 | 53 |
| Internal Oscillator | 8 MHz + 4x PLL | 8 MHz + 4x PLL | 8 MHz + 4x PLL | 8 MHz + 4x PLL | 8 MHz + 4x PLL | 8 MHz + 4x PLL |
| USB Transceiver | Yes (on-die) | Yes | Yes | Yes | Yes | Yes |
| Pin-Compatible Drop-In | Reference | Yes - 100% drop-in (tray vs T&R) | Yes - extended temp grade | Yes - more Flash | Yes - more Flash/RAM | Yes - more Flash, more I/O |
Principais diferenciais
- On-chip USB transceiver with full-speed SIE (vs PIC24FJ16GA002T-I/SO)
- Pin-compatible migration across the GA004 family (vs PIC24FJ32GA004-I/PT)
- Automotive-recommended part with extended-grade options (vs PIC24FJ16GA004-E/PT)
Notas de projeto
The PIC24FJ16GA004T-I/PT operates from 2.0 V to 3.6 V on VDD. Decouple each VDD/VSS pair with a 100 nF ceramic capacitor placed within 2 mm of the pin, and add a bulk 4.7 uF to 10 uF capacitor near the MCU. If the ENVREG pin is used to enable the internal 3.3 V regulator for the USB transceiver, follow the datasheet's VBUS/VUSB decoupling recommendations to keep USB signal integrity within USB 2.0 full-speed specifications.
Route PGED1/PGEC1 (RB0/RB1) and PGED2/PGEC2 (RB2/RB3) to a 6-pin ICSP header with a 4.7 kohm pull-up on MCLR as required by MPLAB ICD programmers. Use keep-out zones around the crystal pins if you mount an external oscillator, and keep USB D+/D- traces matched within 2 mm and 4 pF of capacitance to comply with USB 2.0 full-speed signal-integrity requirements. The exposed pad on the QFN /ML variant must be soldered to the ground plane for thermal dissipation.
Do not assume the internal 8 MHz oscillator is precise enough for USB - the GA004 family requires the 4x PLL to reach the 32 MHz CPU clock but USB full-speed timing still needs the dedicated USB PLL configuration or a 48 MHz USB clock source. Programming voltage on MCLR must follow the ICSP spec; using a too-low Vpp during in-circuit programming is a frequent cause of verification errors. Also confirm the PPS configuration in __init() before relying on remapped peripherals, otherwise UART and PWM will not appear on the expected pins.
Informações de conformidade
Standard /PT part is industrial grade -40C to +85C and not AEC-Q100 qualified. Automotive-grade ordering codes are available per Microchip product page; consult Microchip sales for the -VAO suffix variants.