PIC24FJ512GU410-I/PT - 512KB Flash, USB, LCD 16-bit MCU | Microchip
N.º da peça: PIC24FJ512GU410-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $7.78 | $7,78 |
| 10 | $6.85 | $68,50 |
| 100 | $6.12 | $612,00 |
| 500 | $5.42 | $2.710,00 |
| 1.000 | $4.95 | $4.950,00 |
PIC24FJ512GU410-I/PT Visão geral
A 16-bit microcontroller (MCU) is an embedded processor that fetches 16-bit instructions and operates on 8/16-bit data paths, balancing code density, deterministic interrupt latency, and richer peripherals over 8-bit cores. Within the broader taxonomy, the PIC24F belongs to the 16-bit MCU -> microcontroller -> embedded processor -> semiconductor family, and the PIC24FJ512GU410 specifically targets low-power, USB-enabled human-machine interface (HMI) designs with segment LCDs.
Key features include 512 KB self-programmable Flash with dual-partition OTA updates and EEPROM emulation, 32 KB SRAM, a 10-bit 1 MSPS ADC, multiple UART/SPI/I2C peripherals, a Real-Time Clock/Calendar (RTCC), a DMA controller, and the segment LCD driver supporting up to 480 segments. The integrated USB 2.0 full-speed transceiver eliminates external PHY cost, while the DMA engine offloads peripheral-to-memory transfers for higher throughput.
Typical applications include industrial segment-LCD HMI panels, USB sensor hubs, battery-powered metering with display, medical handheld instrumentation, and home-automation controllers requiring OTA firmware updates. The wide operating voltage range and low-power Sleep modes make it equally suited to line-powered and battery-backed designs where the LCD must remain visible while the core is dormant.
When designing with this device, ensure VDD decoupling follows the manufacturer reference layout with 100 nF caps at every supply pin and a 10 µF bulk near the regulator. The dual-partition Flash enables bootloader-driven OTA updates without external memory, but designers must plan partition sizes and the live-update state machine before deployment. This page combines distributor pricing, drop-in alternatives, and practical design notes that are not aggregated in the manufacturer datasheet alone.
Alternativas drop-in para PIC24FJ512GU410-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24FJ512GU410-I/PT (mesmo formato e footprint) — diferindo em Package, LCD Controller, Operating Temperature, ADC, USB.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC24FJ512GU406T-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.8 / unidade
Ver ficha técnica →PIC24FJ512GU405T-I/M4
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.38 / unidade
Ver ficha técnica →PIC24FJ512GU405-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.32 / unidade
Ver ficha técnica →PIC24FJ128GU410-I/PT
✅ Drop-In✓ Em estoque
$3.83 / unidade
Ver ficha técnica →PIC24FJ512GL410-I/PT
✅ Drop-In✓ Em estoque
$5.05 / unidade
Ver ficha técnica →PIC24FJ512GU410-I/PT Classificações máximas e características elétricas
| Core Architecture | PIC24F (16-bit modified Harvard) |
| Maximum CPU Speed | 32 MHz (16 MIPS) |
| Program Flash | 512 KB (dual-partition, self-programmable) |
| SRAM | 32 KB |
| EEPROM Emulation | Yes (in Flash) |
| Operating Voltage Range | 2.0 V to 3.6 V |
| USB | USB 2.0 Full-Speed Device/Host/OTG (on-chip transceiver) |
| ADC | 10-bit, up to 1 MSPS |
| LCD Controller | Segment LCD, up to 480 segments / 116 commons |
| DMA Channels | 8 channels |
| RTCC | Yes, with VBAT domain support |
| Timers | Multiple 16-bit Timer modules |
| Communication Peripherals | UART, SPI, I2C |
| Encapsulamento | 100-pin TQFP (PT), 12x12 mm |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +85C (Industrial -I) |
| Status RoHS | Compliant |
| Nível MSL | 3 (168 hours) |
Configuração de pinos do PIC24FJ512GU410-I/PT
| Pino 1 | RG15 — GPIO port RG bit 15 / segment LCD |
| Pino 2 | RG13 — GPIO port RG bit 13 |
| Pino 3 | RG14 — GPIO port RG bit 14 |
| Pino 4 | RA0 — GPIO port RA bit 0 / analog |
| Pino 5 | RA1 — GPIO port RA bit 1 / analog |
| Pino 6 | RA2 — GPIO port RA bit 2 / analog |
| Pino 7 | RA3 — GPIO port RA bit 3 / analog |
| Pino 8 | RA4 — GPIO port RA bit 4 |
| Pino 9 | RA5 — GPIO port RA bit 5 |
| Pino 10 | RA6 — GPIO port RA bit 6 |
| Pino 11 | RA7 — GPIO port RA bit 7 |
| Pino 12 | RB0 — GPIO port RB bit 0 / PGED1 |
| Pino 13 | RB1 — GPIO port RB bit 1 / PGEC1 |
| Pino 14 | RB2 — GPIO port RB bit 2 |
| Pino 15 | RB3 — GPIO port RB bit 3 |
| Pino 16 | RB4 — GPIO port RB bit 4 |
| Pino 17 | RB5 — GPIO port RB bit 5 |
| Pino 18 | RB6 — GPIO port RB bit 6 |
| Pino 19 | RB7 — GPIO port RB bit 7 |
| Pino 20 | RB8 — GPIO port RB bit 8 |
| Pino 21 | RB9 — GPIO port RB bit 9 |
| Pino 22 | RB10 — GPIO port RB bit 10 |
| Pino 23 | RB11 — GPIO port RB bit 11 |
| Pino 24 | RB12 — GPIO port RB bit 12 |
| Pino 25 | RB13 — GPIO port RB bit 13 |
| Pino 26 | RB14 — GPIO port RB bit 14 |
| Pino 27 | RB15 — GPIO port RB bit 15 |
| Pino 28 | VSS — Ground reference |
| Pino 29 | VDD — Positive supply 2.0-3.6 V |
| Pino 30 | RC0 — GPIO port RC bit 0 |
| Pino 31 | RC1 — GPIO port RC bit 1 |
| Pino 32 | RC2 — GPIO port RC bit 2 |
| Pino 33 | RC3 — GPIO port RC bit 3 |
| Pino 34 | RC4 — GPIO port RC bit 4 |
| Pino 35 | RC5 — GPIO port RC bit 5 |
| Pino 36 | RC6 — GPIO port RC bit 6 |
| Pino 37 | RC7 — GPIO port RC bit 7 |
| Pino 38 | RC8 — GPIO port RC bit 8 |
| Pino 39 | RC9 — GPIO port RC bit 9 |
| Pino 40 | RC10 — GPIO port RC bit 10 |
| Pino 41 | RC11 — GPIO port RC bit 11 |
| Pino 42 | RC12 — GPIO port RC bit 12 |
| Pino 43 | RC13 — GPIO port RC bit 13 |
| Pino 44 | RC14 — GPIO port RC bit 14 |
| Pino 45 | RC15 — GPIO port RC bit 15 |
| Pino 46 | VSS — Ground reference |
| Pino 47 | VDD — Positive supply 2.0-3.6 V |
| Pino 48 | RD0 — GPIO port RD bit 0 |
| Pino 49 | RD1 — GPIO port RD bit 1 |
| Pino 50 | RD2 — GPIO port RD bit 2 |
| Pino 51 | RD3 — GPIO port RD bit 3 |
| Pino 52 | RD4 — GPIO port RD bit 4 |
| Pino 53 | RD5 — GPIO port RD bit 5 |
| Pino 54 | RD6 — GPIO port RD bit 6 |
| Pino 55 | RD7 — GPIO port RD bit 7 |
| Pino 56 | RD8 — GPIO port RD bit 8 |
| Pino 57 | RD9 — GPIO port RD bit 9 |
| Pino 58 | RD10 — GPIO port RD bit 10 |
| Pino 59 | RD11 — GPIO port RD bit 11 |
| Pino 60 | RD12 — GPIO port RD bit 12 |
| Pino 61 | RD13 — GPIO port RD bit 13 |
| Pino 62 | RD14 — GPIO port RD bit 14 |
| Pino 63 | RD15 — GPIO port RD bit 15 |
| Pino 64 | VSS — Ground reference |
| Pino 65 | VDD — Positive supply 2.0-3.6 V |
| Pino 66 | RE0 — GPIO port RE bit 0 |
| Pino 67 | RE1 — GPIO port RE bit 1 |
| Pino 68 | RE2 — GPIO port RE bit 2 |
| Pino 69 | RE3 — GPIO port RE bit 3 |
| Pino 70 | RE4 — GPIO port RE bit 4 |
| Pino 71 | RE5 — GPIO port RE bit 5 |
| Pino 72 | RE6 — GPIO port RE bit 6 |
| Pino 73 | RE7 — GPIO port RE bit 7 |
| Pino 74 | RE8 — GPIO port RE bit 8 |
| Pino 75 | RE9 — GPIO port RE bit 9 |
| Pino 76 | RF0 — GPIO port RF bit 0 |
| Pino 77 | RF1 — GPIO port RF bit 1 |
| Pino 78 | RF2 — GPIO port RF bit 2 / SDA2 |
| Pino 79 | RF3 — GPIO port RF bit 3 / SCL2 |
| Pino 80 | RF4 — GPIO port RF bit 4 |
| Pino 81 | RF5 — GPIO port RF bit 5 |
| Pino 82 | RF6 — GPIO port RF bit 6 |
| Pino 83 | RF7 — GPIO port RF bit 7 |
| Pino 84 | RF8 — GPIO port RF bit 8 |
| Pino 85 | VSS — Ground reference |
| Pino 86 | VDD — Positive supply 2.0-3.6 V |
| Pino 87 | RG0 — GPIO port RG bit 0 |
| Pino 88 | RG1 — GPIO port RG bit 1 / D+ |
| Pino 89 | RG2 — GPIO port RG bit 2 / D- |
| Pino 90 | RG3 — GPIO port RG bit 3 |
| Pino 91 | RG4 — GPIO port RG bit 4 / RTCC |
| Pino 92 | RG5 — GPIO port RG bit 5 |
| Pino 93 | RG6 — GPIO port RG bit 6 |
| Pino 94 | RG7 — GPIO port RG bit 7 |
| Pino 95 | RG8 — GPIO port RG bit 8 |
| Pino 96 | RG9 — GPIO port RG bit 9 |
| Pino 97 | RG10 — GPIO port RG bit 10 |
| Pino 98 | RG11 — GPIO port RG bit 11 |
| Pino 99 | RG12 — GPIO port RG bit 12 |
| Pino 100 | MCLR — Master clear / reset (active low) |
Aplicações típicas
PIC24FJ512GU410-I/PT é adequado para 6 aplicaçãos: Industrial Segment-LCD HMI Panel, USB Sensor Hub, Battery-Powered Smart Meter with LCD, Medical Handheld Instrumentation, Home-Automation Controller with OTA, Automotive Accessory Display Module.
Industrial Segment-LCD HMI Panel
The PIC24FJ512GU410-I/PT is purpose-built for industrial segment-LCD HMI panels because its on-chip LCD controller drives up to 480 segments while the eXtreme Low-Power Sleep modes keep the display visible with the core dormant. With 32 KB SRAM, the MCU can buffer full screen refresh while the DMA engine streams background updates to the LCD without CPU wakeups. The 2.0 V to 3.6 V operating range tolerates noisy 24 V industrial rails after regulation. Place a 100 nF decoupling cap at every VDD/VDDCORE pin to keep the segment waveforms clean, and use the RTCC in low-voltage Sleep for accurate timed wakes.
Recomendado
USB Sensor Hub
The integrated USB 2.0 Full-Speed OTG transceiver makes the PIC24FJ512GU410-I/PT a compact USB sensor hub, eliminating an external PHY and reducing BOM cost for HID or vendor-class devices. The DMA engine streams high-speed ADC samples into USB endpoints with minimal CPU load, sustaining throughput while keeping interrupt latency predictable. The 512 KB dual-partition Flash enables vendor firmware upgrades over USB without external memory. Pair the MCU with an ESD-protected USB connector and follow the manufacturer reference layout to maintain Chapter 7 electrical compliance.
Recomendado
Battery-Powered Smart Meter with LCD
Battery-powered smart meters benefit from the PIC24FJ512GU410-I/PT's 5 low-power modes including a low-voltage Sleep that keeps the RTCC running from a separate LDO at microamp current. The 512 KB Flash supports Over-The-Air firmware updates for field-deployed meters, while the segment LCD driver displays consumption without waking the core. The 10-bit 1 MSPS ADC digitizes sensor inputs with sufficient precision for residential metering. Use VBAT to back up the RTCC across primary battery swaps.
Recomendado
Medical Handheld Instrumentation
Medical handheld instruments such as glucose meters and pulse oximeters fit the PIC24FJ512GU410-I/PT because of its low-power Sleep, integrated USB for charging and data sync, and the segment LCD driver for numeric readouts. The industrial -I temperature grade covers the body-temperature operation range, and the 32 KB SRAM buffers patient data between scheduled syncs. Use the DMA to offload sensor sampling and reserve CPU bandwidth for user-interface logic.
Recomendado
Home-Automation Controller with OTA
Home-automation controllers require reliable firmware updates and a UI surface; the PIC24FJ512GU410-I/PT delivers both via 512 KB dual-partition Flash for OTA rollbacks and a segment LCD for local status. USB OTG allows the same port to act as host for peripheral charging or device for cloud sync. The RTCC schedules wakeups for time-of-day automation. Add a SPI flash if persistent logging exceeds internal EEPROM emulation capacity.
Recomendado
Automotive Accessory Display Module
Automotive accessory display modules such as garage-door indicators and aftermarket sensor displays leverage the PIC24FJ512GU410-I/PT's industrial -40C to +85C temperature grade and segment LCD for at-a-glance readouts. The USB port enables factory firmware loading and field diagnostics, while the RTCC timestamps events. The 32 KB SRAM buffers vehicle-bus messages filtered by the UART. Use automotive-grade LDOs to tolerate load-dump transients on the supply rail.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24FJ512GU410-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24FJ512GU406T-I/PT | PIC24FJ512GU405T-I/M4 | PIC24FJ512GU405-I/PT | PIC24FJ128GU410-I/PT | PIC24FJ512GL410-I/PT |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP (PT) 12x12 mm | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 512 KB | 512 KB | 512 KB | 512 KB | 128 KB | 512 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| USB 2.0 Full-Speed | Yes (Device/Host/OTG) | Yes | Yes | Yes | Yes | No |
| Segment LCD Controller | Yes (up to 480 segments) | Yes | Yes | Yes | Yes | Yes |
| Maximum CPU Speed | 32 MHz / 16 MIPS | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Operating Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| DMA Channels | 8 | 8 | 8 | 8 | 8 | 8 |
Principais diferenciais
- Highest on-chip Flash density in the PIC24FJ GU4 family at 100-pin TQFP (vs PIC24FJ128GU410-I/PT)
- Integrated USB 2.0 Full-Speed OTG transceiver on-chip (vs PIC24FJ512GL410-I/PT)
- Dual-partition Flash with Over-The-Air firmware update support (vs PIC24FJ256GA704-I/PT)
Notas de projeto
Place a 100 nF decoupling capacitor within 3 mm of every VDD/VDDCORE/AVDD pin and a single 10 uF bulk tantalum or ceramic on the main supply rail. The internal voltage regulator requires the bulk cap for stable Sleep-mode transitions; skipping it can cause RTCC drift or spurious resets. For battery designs, route VBAT through a Schottky diode so the RTCC domain retains time across primary-battery swaps.
The 100-pin TQFP uses 0.4 mm pitch; use 0.15 mm/0.20 mm trace width with matched impedance for USB D+/D- to comply with USB 2.0 Chapter 7 signaling. Route the crystal traces short and symmetric with a guard ring tied to ground, and keep the 32.768 kHz crystal within 5 mm of SOSC pins to minimize load-capacitance drift. Avoid routing high-frequency signals under the LCD segment traces.
When migrating between the PIC24FJ512GU410 and PIC24FJ512GL410, USB peripherals fail silently because the GL410 lacks the on-chip transceiver. Always confirm the silicon revision in the Device ID register and use the ICSP pair selected in your debug configuration - mixing PGEC1 with PGED2 prevents programming. The dual-partition Flash is not a substitute for EEPROM in applications requiring byte-level writes: enable the EEPROM emulation library and bound write cycles to avoid Flash wear.
The segment LCD controller multiplexes COM and SEG lines on shared GPIO; allocate dedicated ground pours around LCD traces to prevent digital noise from coupling into the segment waveforms. Tie unused LCD pins to VDD through 100 kohm resistors to prevent floating segments, and add a 1 uF cap on the LCD bias supply if the display flickers under heavy CPU load. Always enable the charge pump configuration bit when driving high-segment-count displays at low VDD.
Informações de conformidade
RoHS and REACH compliance per Microchip product page. Industrial -I temperature grade; not AEC-Q100 qualified - select PIC24FJ512GB610-I/BG variants for automotive-grade applications.
