PIC24HJ128GP306A-I/MR - 40 MIPS 128KB Flash 16-bit MCU | Microchip
N.º da peça: PIC24HJ128GP306A-I/MR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $5.4 | $5,40 |
| 10 | $4.85 | $48,50 |
| 100 | $4.32 | $432,00 |
| 500 | $3.79 | $1.895,00 |
| 1.000 | $3.24 | $3.240,00 |
PIC24HJ128GP306A-I/MR Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as timers, ADC modules, communication interfaces (UART, SPI, I2C), and general-purpose I/O. The PIC24H belongs to the 16-bit MCU hierarchy (16-bit CPU -> microcontroller -> embedded computing -> semiconductor), using a modified Harvard architecture with a 16-bit data path and 24-bit instruction word for efficient C compilation and signal-processing headroom.
Key features include 16-channel 12-bit ADC with 500 ksps conversion, multiple UART/SPI/I2C interfaces, 8-byte instruction cache, 16-bit timers with Input Capture and Output Compare, and an integrated mTouch capacitive touch peripheral. The 128 KB Flash supports self-programming, and the 64-pin QFN package provides extensive I/O with low thermal resistance for industrial temperature grade (-40C to +85C) operation.
Architecturally, the PIC24H uses a pipelined 16-bit core with a deterministic interrupt model and single-cycle multiply, enabling responsive real-time control loops. The peripheral set is mapped through a Peripheral Pin Select (PPS) that allows flexible remapping of digital functions to physical pins, simplifying PCB layout versus fixed-pin microcontrollers.
Typical applications include industrial motor control, digital power conversion, sensor interfacing, building automation, point-of-sale terminals, and general-purpose embedded control where 16-bit arithmetic, USB-ready peripherals, and DSP-style signal handling are required. The PIC24H's pin compatibility with the dsPIC33F enables code reuse when DSP functionality is later needed.
When designing with this device, plan oscillator and ICSP layout early because the PIC24HJ128GP306A requires dedicated PGECx/PGEDx pairs for in-circuit programming; any pair may be used, but both signals must share the same pair index. Brown-Out Reset and Watchdog Timer settings should be configured at the firmware level to match the application power profile.
This page synthesizes distributor pricing, parametric specifications, drop-in alternatives, and PCB design notes not aggregated in the manufacturer datasheet or single distributor listings.
Alternativas drop-in para PIC24HJ128GP306A-I/MR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC24HJ128GP306A-I/MR (mesmo formato e footprint) — diferindo em Package, Maximum CPU Speed, ADC, Timers, Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC24HJ128GP306A-E/MR
✅ Drop-In✓ Em estoque
$6.5 / unidade
Ver ficha técnica →PIC24HJ128GP306AT-I/MR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
dsPIC33FJ128GP306A-I/MR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC24HJ128GP306A-I/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC24HJ128GP306A-E/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$6.1 / unidade
Ver ficha técnica →PIC24HJ128GP306-I/PT
✅ Drop-In✓ Em estoque
$4.05 / unidade
Ver ficha técnica →PIC24HJ128GP306A-I/MR Classificações máximas e características elétricas
| Core | PIC24H 16-bit modified Harvard |
| CPU Bit Width | 16-bit data, 24-bit instruction |
| Maximum CPU Speed | 40 MIPS @ 40 MHz |
| Program Memory (Flash) | 128 KB |
| Data Memory (SRAM) | 16 KB |
| Operating Voltage (VDD) | 3.0 V to 3.6 V |
| Temperatura de operação | -40 C to +85 C (Industrial) |
| ADC | 12-bit, up to 500 ksps, 16 channels |
| I/O Pins | 53 (typical for 64-pin MR package) |
| Communication Interfaces | UART, SPI, I2C (with PPS remap) |
| Timers | 16-bit Timer with Input Capture / Output Compare |
| Encapsulamento | 64-pin QFN (MR) with exposed thermal pad |
| Tipo de montagem | Surface Mount |
| ICSP Programming | PGECx / PGEDx pairs, JTAG / IWDG |
| Instruction Cache | 8-byte |
| Status RoHS | Compliant |
Configuração de pinos do PIC24HJ128GP306A-I/MR
| Pino 1 | RP23/RB15 — Remappable I/O / general-purpose port B bit 15 |
| Pino 2 | VSS — Ground reference |
| Pino 3 | VDD — Positive supply 3.0-3.6 V |
| Pino 4 | RP22/RB14 — Remappable I/O / port B bit 14 |
| Pino 5 | RP21/RB13 — Remappable I/O / port B bit 13 |
| Pino 6 | RP20/RB12 — Remappable I/O / port B bit 12 |
| Pino 7 | RP19/RB11 — Remappable I/O / port B bit 11 |
| Pino 8 | RP18/RB10 — Remappable I/O / port B bit 10 |
| Pino 9 | RP17/RB9 — Remappable I/O / port B bit 9 |
| Pino 10 | RP16/RB8 — Remappable I/O / port B bit 8 |
| Pino 11 | RP15/RB7 — Remappable I/O / port B bit 7 |
| Pino 12 | RP14/RB6 — Remappable I/O / port B bit 6 |
| Pino 13 | RP13/RB5 — Remappable I/O / port B bit 5 |
| Pino 14 | RP11/RB4 — Remappable I/O / port B bit 4 |
| Pino 15 | RP10/RB3 — Remappable I/O / port B bit 3 |
| Pino 16 | RP9/RB2 — Remappable I/O / port B bit 2 |
| Pino 17 | RP8/RB1 — Remappable I/O / port B bit 1 |
| Pino 18 | RP7/RB0 — Remappable I/O / port B bit 0 |
| Pino 19 | VSS — Ground reference |
| Pino 20 | VDD — Positive supply 3.0-3.6 V |
| Pino 21 | OSC1/CLKI — Crystal oscillator input / external clock |
| Pino 22 | OSC2/CLKO — Crystal oscillator output |
| Pino 23 | SOSC1/T1CK — Secondary oscillator / Timer1 clock |
| Pino 24 | SOSC2 — Secondary oscillator output |
| Pino 25 | MCLR — Master Clear reset (active low) |
| Pino 26 | PGED2 — ICSP programming data |
| Pino 27 | PGEC2 — ICSP programming clock |
| Pino 28 | AVDD — Analog positive supply |
| Pino 29 | AVSS — Analog ground |
| Pino 30 | AN0 — Analog input 0 / ADC channel |
| Pino 31 | AN1 — Analog input 1 / ADC channel |
| Pino 32 | AN2 — Analog input 2 / ADC channel |
| Pino 33 | AN3 — Analog input 3 / ADC channel |
| Pino 34 | AN4 — Analog input 4 / ADC channel |
| Pino 35 | AN5 — Analog input 5 / ADC channel |
| Pino 36 | AN6 — Analog input 6 / ADC channel |
| Pino 37 | AN7 — Analog input 7 / ADC channel |
| Pino 38 | AN8 — Analog input 8 / ADC channel |
| Pino 39 | AN9 — Analog input 9 / ADC channel |
| Pino 40 | AN10 — Analog input 10 / ADC channel |
| Pino 41 | AN11 — Analog input 11 / ADC channel |
| Pino 42 | AN12 — Analog input 12 / ADC channel |
| Pino 43 | AN13 — Analog input 13 / ADC channel |
| Pino 44 | AN14 — Analog input 14 / ADC channel |
| Pino 45 | AN15 — Analog input 15 / ADC channel |
| Pino 46 | VREF+ — ADC positive voltage reference |
| Pino 47 | VREF- — ADC negative voltage reference |
| Pino 48 | RA0 — Port A bit 0 |
| Pino 49 | RA1 — Port A bit 1 |
| Pino 50 | RA2 — Port A bit 2 |
| Pino 51 | RA3 — Port A bit 3 |
| Pino 52 | RA4 — Port A bit 4 |
| Pino 53 | RA5 — Port A bit 5 |
| Pino 54 | RA6 — Port A bit 6 |
| Pino 55 | RA7 — Port A bit 7 |
| Pino 56 | RC1 — Port C bit 1 |
| Pino 57 | RC2 — Port C bit 2 |
| Pino 58 | RC3 — Port C bit 3 |
| Pino 59 | RC4 — Port C bit 4 |
| Pino 60 | RD0 — Port D bit 0 |
| Pino 61 | RD1 — Port D bit 1 |
| Pino 62 | RD2 — Port D bit 2 |
| Pino 63 | RD3 — Port D bit 3 |
| Pino 64 | RF6 — Port F bit 6 |
Aplicações típicas
PIC24HJ128GP306A-I/MR é adequado para 7 aplicaçãos: Industrial Motor Control, Digital Power Conversion (SMPS), Building Automation Controllers, Point-of-Sale (POS) Terminals, Sensor Fusion and Data Acquisition, Medical Patient Monitoring Devices, IoT Edge Devices and Gateways.
Industrial Motor Control
The PIC24HJ128GP306A-I/MR is well-suited to industrial motor control loops that require deterministic 40 MIPS performance and 16 KB SRAM for state machines. The 12-bit ADC with 500 ksps sampling captures current and back-EMF feedback at PWM rates of 20 kHz or higher, while the 16-bit timers with Output Compare generate complementary PWM signals with hardware dead-band insertion. The 64-pin QFN package exposes sufficient I/O for three-phase inverter gate drivers, encoder interfaces, and CAN-style fault signaling. Its industrial -40 C to +85 C operating range covers most factory-floor enclosures, and PPS remapping simplifies PCB layout versus fixed-pin microcontrollers.
Recomendado
Digital Power Conversion (SMPS)
Digital switched-mode power supplies (SMPS) benefit from the PIC24HJ128GP306A-I/MR's 40 MIPS throughput to execute voltage-mode and peak-current-mode control loops at 100 kHz+ switching frequencies. The 12-bit ADC samples output voltage and current sense signals, while the PWM module with configurable dead time drives synchronous rectifier MOSFETs directly. Flash-resident firmware enables closed-loop tuning without external components, and self-programming supports in-field firmware updates for safety certifications. The 3.0-3.6 V VDD range aligns with auxiliary rails from PFC front-end stages.
Recomendado
Building Automation Controllers
Building automation nodes (HVAC, lighting, access control) leverage the PIC24HJ128GP306A-I/MR's 128 KB Flash for BACnet or Modbus protocol stacks plus sensor processing. UART and SPI peripherals connect to transceivers and sensors; I2C supports environmental sensor clusters (temperature, humidity, CO2). The 16-channel 12-bit ADC reads analog light sensors and 4-20 mA loop inputs from industrial transducers. Industrial temperature grade and QFN-64's compact footprint suit DIN-rail controller modules where PCB area is constrained. Pin compatibility with dsPIC33F enables migration to edge-AI motor controllers for smart-building applications.
Recomendado
Point-of-Sale (POS) Terminals
POS terminals benefit from the PIC24HJ128GP306A-I/MR's generous Flash (128 KB) and SRAM (16 KB) for secure transaction stacks, display drivers, and keypad scanning. Multiple UARTs handle magnetic-stripe readers, NFC modules, and receipt printers; SPI interfaces TFT displays and secure key-storage EEPROMs. The 12-bit ADC reads battery telemetry for mobile POS tablets. PPS remapping allows PCB engineers to route signals based on enclosure constraints rather than fixed pin assignments, simplifying mechanical-electrical integration. Industrial temperature rating supports deployment in semi-outdoor retail environments.
Recomendado
Sensor Fusion and Data Acquisition
Sensor-fusion data-acquisition systems use the PIC24HJ128GP306A-I/MR to aggregate multiple sensors (IMU, pressure, flow) into a unified data stream. The 12-bit ADC with up to 16 channels multiplexes analog transducer outputs; UART/SPI/I2C buses connect to digital sensors. The 40 MIPS core executes Kalman-filter and complementary-filter routines for orientation estimation, while 16 KB SRAM buffers raw sensor data between transmission bursts. The QFN-64 with exposed pad provides low thermal resistance for continuous 40 MHz operation in sealed environmental enclosures used in industrial monitoring applications.
Recomendado
Medical Patient Monitoring Devices
Although not AEC-Q100 qualified, the PIC24HJ128GP306A-I/MR is widely used in non-life-critical medical peripherals such as pulse oximetry front-ends, electronic thermometers, and patient-room environmental monitors. The 12-bit ADC digitizes optical-sensor photodiode currents; the deterministic PIC24H core executes firmware signal-processing with predictable interrupt response. The 128 KB program memory holds IEC 62304-compliant structured code with trace buffers, and 16 KB SRAM supports continuous waveform logging. Industrial temperature grade covers typical clinical environments, while the compact QFN-64 footprint enables wearable form factors.
Recomendado
IoT Edge Devices and Gateways
IoT edge gateways using the PIC24HJ128GP306A-I/MR aggregate sensor data from fieldbus nodes (RS-485, CAN, Modbus) and forward to cloud backends via Wi-Fi or Ethernet companion modules. The 16-bit core handles Modbus RTU/TCP protocol conversion with deterministic timing. 128 KB Flash stores MQTT/TLS libraries and OTA update logic; 16 KB SRAM buffers message queues. UART interfaces ESP32/ESP8266 Wi-Fi modules via AT commands; SPI connects Ethernet controllers. Industrial temperature and PPS-based pin remap simplify integration into DIN-rail IoT nodes with mixed sensor clusters.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC24HJ128GP306A-I/MR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC24HJ128GP306A-E/MR | PIC24HJ128GP306AT-I/MR | dsPIC33FJ128GP306A-I/MR | PIC24HJ128GP306A-I/PT | PIC24HJ128GP306-I/PT |
|---|---|---|---|---|---|---|
| Package | QFN-64 (MR) with exposed thermal pad | QFN-64 (MR) - same | QFN-64 (MR) - same | QFN-64 (MR) - same | TQFP-64 (PT) | TQFP-64 (PT) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | PIC24H 16-bit | PIC24H 16-bit | PIC24H 16-bit | dsPIC33F 16-bit with DSP | PIC24H 16-bit | PIC24H 16-bit |
| Max CPU Speed | 40 MIPS @ 40 MHz | 40 MIPS @ 40 MHz | 40 MIPS @ 40 MHz | 50 MIPS @ 50 MHz | 40 MIPS @ 40 MHz | 40 MIPS @ 40 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Operating Temperature | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) | -40 C to +85 C (Industrial) |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Packaging | Tray | Tray | Tape and Reel | Tray | Tray | Tray |
Principais diferenciais
- Deterministic 40 MIPS 16-bit performance with extensive QFN-64 I/O (vs PIC24FJ64GA002-I/ML (PIC24F family, 16 MIPS))
- Pin-compatible upgrade path to dsPIC33F DSP family (vs PIC24HJ128GP306A-I/MR (PIC24H) vs dsPIC33FJ128GP306A-I/MR)
- Flexible PPS-based peripheral remapping vs fixed-pin microcontrollers (vs Fixed-pin 16-bit MCUs (e.g., older PIC24F series without PPS))
Notas de projeto
Decouple each VDD/VSS pair with a 100 nF ceramic capacitor placed within 2 mm of the package pin; add a single 10 uF bulk capacitor on each main supply rail. PIC24HJ128GP306A-I/MR operates from a single 3.3 V rail - the internal LDO derives the 1.8 V core supply, so no separate core-voltage pin exists. Place a 10 uF + 100 nF pair on AVDD/AVSS with AVDD tied to the same 3.3 V through a ferrite bead for ADC noise isolation. Power-on reset and Brown-Out Reset thresholds must be configured in firmware to match the application supply ramp profile.
The QFN-64 (MR) package has a center exposed thermal pad that must be soldered to a continuous copper ground pour on the top or bottom PCB layer, with thermal vias stitching to internal ground planes. Estimated: at 40 MHz continuous operation in -40 C to +85 C industrial range, expect junction-to-ambient thermal resistance around 28-32 C/W with a properly stitched pad, allowing approximately 1 W dissipation without active cooling. Use micro-via arrays (0.2-0.3 mm drill, 0.5 mm pitch) under the exposed pad; tented or filled-and-capped vias prevent solder wicking during reflow.
The PIC24HJ128GP306A-I/MR has multiple PGECx/PGEDx pairs (PGEC1/PGED1, PGEC2/PGED2, and PGEC3/PGED3) - if you select PGEC2 for ICSPCLK, you must use PGED2 for ICSPDAT; the pairs cannot be mixed. Pull MCLR high through a 10 kOhm resistor and place a 100 nF cap on MCLR to ground to suppress noise-induced resets. Configure unused I/O pins as outputs driving low or inputs with internal pull-ups enabled - floating inputs can cause excess current and oscillator instability. The Peripheral Pin Select (PPS) registers must be unlocked (IOLOCK = 0) before peripheral remapping changes will take effect.
Informações de conformidade
RoHS compliant per Microchip product page. Not AEC-Q100 qualified - this is a general-purpose industrial MCU; the automotive PIC24HJ128GP306A family variants with explicit AEC-Q100 marking should be specified for vehicle applications.
