PIC32CM1216MC00032-I/RTB - 48MHz Cortex-M0+ 128KB MCU | Microchip
N.º da peça: PIC32CM1216MC00032-I/RTB ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.45 | $3,45 |
| 10 | $3.18 | $31,80 |
| 100 | $2.85 | $285,00 |
| 500 | $2.55 | $1.275,00 |
| 1.000 | $2.3 | $2.300,00 |
PIC32CM1216MC00032-I/RTB Visão geral
What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), volatile memory (SRAM), and peripheral interfaces. The PIC32CM MC00 family uses the ARM Cortex-M0+ core, the smallest and most energy-efficient 32-bit core in the ARM family, offering deterministic interrupt response and Thumb-2 instruction set efficiency. Within the broader taxonomy, this part is a Cortex-M0+ MCU -> ARM MCU -> 32-bit MCU -> microcontroller -> semiconductor.
Key features include 128 KB Flash, 16 KB SRAM, 48 MHz core clock, integrated motor-control PWM, SERCOM (serial communication) peripherals with LIN support, and a wide operating voltage range suited for 5 V systems. The 32-VQFN (5x5) package exposes a generous set of I/O pins while keeping the PCB footprint under 25 mm², ideal for compact motor-control and industrial designs.
Technically, the device is built on a low-power CMOS process and includes an on-chip debugger, multiple timers, ADC, and motor-control PWMs. Hardware-level features such as brown-out detect, watchdog timer, and clock failure detection improve reliability in electrically noisy motor-drive environments where stray inductance and back-EMF can corrupt logic signals.
Typical applications include BLDC and PMSM motor control, HVAC fan/pump controllers, appliance control boards, small industrial drives, and LIN-attached body-control nodes. The combination of 5 V tolerance and integrated motor-control peripherals simplifies mixed-signal PCB design.
When designing with this part, verify that your motor-control algorithm (FOC, trapezoidal, or sensorless) is supported by the available PWMs and ADCs. Decoupling, ground returns, and proper PCB layout for high-current switching traces are essential for EMC compliance.
Alternativas drop-in para PIC32CM1216MC00032-I/RTB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32CM1216MC00032-I/RTB (mesmo formato e footprint) — diferindo em Package, Communication Peripherals, SRAM, Core, MSL Level.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32CM1216MC00032-E/RTB
✅ Drop-In✓ Em estoque
$2.07 / unidade
Ver ficha técnica →PIC32CM6408MC00032-I/RTB
✅ Drop-In✓ Em estoque
$2.55 / unidade
Ver ficha técnica →PIC32CM1216MC00048-I/RTB
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32CM1216MC00032T-E/RTB
✅ Drop-In✓ Em estoque
$1.62 / unidade
Ver ficha técnica →PIC32CM1216MC00032-I/RTB Classificações máximas e características elétricas
| Core Architecture | ARM Cortex-M0+ |
| Core Bit Width | 32-bit |
| Maximum CPU Clock | 48 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| SRAM | 16 KB |
| Faixa de temperatura de operação | -40C to +85C (Industrial) |
| Encapsulamento | 32-pin VQFN (5x5 mm) |
| Tipo de montagem | Surface Mount |
| Motor Control Peripherals | PWM channels, ADC for motor control |
| Communication Peripherals | SERCOM, LIN, UART, SPI, I2C |
| Series | PIC32CM MC00 Family |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do PIC32CM1216MC00032-I/RTB
| Pino 1 | VDD — Digital power supply |
| Pino 2 | GND — Ground |
| Pino 3 | PA00 — GPIO / SERCOM |
| Pino 4 | PA01 — GPIO / SERCOM |
| Pino 5 | PA02 — GPIO / ADC |
| Pino 6 | PA03 — GPIO / ADC reference |
| Pino 7 | PA04 — GPIO / SERCOM |
| Pino 8 | PA05 — GPIO / SERCOM |
| Pino 9 | PA06 — GPIO / SERCOM |
| Pino 10 | PA07 — GPIO / SERCOM |
| Pino 11 | PA08 — GPIO / SERCOM |
| Pino 12 | PA09 — GPIO / SERCOM |
| Pino 13 | PA10 — GPIO / SERCOM |
| Pino 14 | PA11 — GPIO / SERCOM |
| Pino 15 | PA12 — GPIO / SERCOM |
| Pino 16 | PA13 — GPIO / SERCOM |
| Pino 17 | PA14 — GPIO / SERCOM |
| Pino 18 | PA15 — GPIO / SERCOM |
| Pino 19 | PA16 — GPIO / SERCOM |
| Pino 20 | PA17 — GPIO / SERCOM |
| Pino 21 | PA18 — GPIO / SERCOM |
| Pino 22 | PA19 — GPIO / SERCOM |
| Pino 23 | PA20 — GPIO / SERCOM |
| Pino 24 | PA21 — GPIO / SERCOM |
| Pino 25 | PA22 — GPIO / SERCOM |
| Pino 26 | PA23 — GPIO / SERCOM |
| Pino 27 | PA24 — GPIO / SERCOM |
| Pino 28 | PA25 — GPIO / SERCOM |
| Pino 29 | PA26 — GPIO / SERCOM |
| Pino 30 | PA27 — GPIO / SERCOM |
| Pino 31 | PA28 — GPIO / SERCOM |
| Pino 32 | EP — Exposed thermal pad (GND) |
Aplicações típicas
PIC32CM1216MC00032-I/RTB é adequado para 6 aplicaçãos: BLDC and PMSM Motor Control, HVAC Fan and Pump Controllers, Appliance Control Boards, Small Industrial Drives, Automotive Body-Control LIN Nodes, Battery-Powered IoT Sensor Nodes.
BLDC and PMSM Motor Control
The PIC32CM1216MC00032-I/RTB's 48 MHz Cortex-M0+ core, 128 KB Flash, and dedicated motor-control PWM peripherals with complementary outputs and dead-band generation make it ideal for sensorless FOC or trapezoidal commutation on BLDC and PMSM motors. The 5 V tolerance directly interfaces with 5 V gate drivers without level shifters, simplifying the power stage. Compared to discrete MCU+FPGA solutions, this single-chip approach reduces BOM cost and PCB area while supporting field-oriented control algorithms that demand deterministic interrupt latency.
Recomendado
HVAC Fan and Pump Controllers
The 5 V operating range and integrated ADC for current sensing position the PIC32CM1216MC00032-I/RTB as a strong fit for HVAC fan and pump controllers operating from 24 V or 48 V rectified buses. The Cortex-M0+ core handles closed-loop PI control of airflow or fluid pressure while the LIN peripheral interfaces with building automation networks. The 128 KB Flash supports advanced control algorithms including adaptive filtering and soft-start profiles without external memory.
Recomendado
Appliance Control Boards
Washing machines, refrigerators, and dishwashers benefit from the PIC32CM1216MC00032-I/RTB's combination of motor-control PWM, multiple SERCOM channels, and 5 V noise immunity. The MCU can simultaneously drive a BLDC drain pump, read temperature/humidity sensors via I2C, and communicate with the main control panel through UART or LIN. The 16 KB SRAM buffers sensor data without external memory, reducing BOM cost on cost-sensitive consumer appliances.
Recomendado
Small Industrial Drives
Compact industrial drives below 100 W benefit from the PIC32CM1216MC00032-I/RTB's industrial -40C to +85C operating range and SERCOM-based communication stack. The MCU supports Modbus RTU over UART for SCADA integration, plus SPI for digital potentiometer control of the power stage. Hardware brown-out detection and watchdog timer improve field reliability, critical for drives installed in inaccessible industrial cabinets.
Recomendado
Automotive Body-Control LIN Nodes
The PIC32CM1216MC00032-I/RTB's LIN support and industrial temperature range position it for non-safety-critical automotive body-control nodes such as seat controllers, mirror adjusters, and lighting drivers. Pair the MCU with a LIN transceiver like ATA6561 to create a cost-optimized LIN slave node. The 32-VQFN footprint fits inside space-constrained door-module PCBs, and the 128 KB Flash handles LIN diagnostic services plus application logic.
Recomendado
Battery-Powered IoT Sensor Nodes
While primarily a 5 V MCU, the PIC32CM1216MC00032-I/RTB's low-power peripherals and Cortex-M0+ sleep modes support battery-powered IoT sensor nodes that wake periodically to read sensors and transmit over LIN or UART. The 128 KB Flash accommodates OTA update bootloaders plus application code, and the 16 KB SRAM buffers sensor data during transmit bursts. Pair with an external sensor like MCP9808 for HVAC monitoring or soil-moisture sensing.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32CM1216MC00032-I/RTB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32CM1216MC00032-E/RTB | PIC32CM6408MC00032-I/RTB | PIC32CM1216MC00048-I/RTB | PIC32CM1216MC00032T-E/RTB |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VQFN (5x5 mm) | 32-VQFN (5x5 mm) - same | 32-VQFN (5x5 mm) - same | 32-VQFN (5x5 mm) - same | 32-VQFN (5x5 mm) - same |
| Core | ARM Cortex-M0+ 48 MHz | ARM Cortex-M0+ 48 MHz | ARM Cortex-M0+ 48 MHz | ARM Cortex-M0+ 48 MHz | ARM Cortex-M0+ 48 MHz |
| Flash Memory | 128 KB | 128 KB | 64 KB | 128 KB | 128 KB |
| SRAM | 16 KB | 16 KB | 8 KB | 16 KB | 16 KB |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) |
| Motor Control PWM | Yes | Yes | Yes | Yes | Yes |
| LIN Support | Yes | Yes | Yes | Yes | Yes |
Principais diferenciais
- 5 V I/O tolerance with integrated motor-control PWM (vs Generic Cortex-M0+ MCUs from competitors)
- 128 KB Flash with 16 KB SRAM on a Cortex-M0+ core (vs PIC32CM6408MC00032-I/RTB)
- Industrial -40C to +85C operating range option with same die (vs PIC32CM1216MC00032-E/RTB)
Notas de projeto
The 32-VQFN (5x5 mm) package uses an exposed thermal pad (EP, pin 32) that MUST be soldered to a ground pour on the top or bottom PCB layer. Recommended copper area is at least 25 mm² of continuous ground plane connected through 9 to 16 thermal vias (0.3 mm drill, 0.6 mm pad) to maximize heat dissipation. For motor-control applications driving high-side switches, ambient temperatures up to 85°C are achievable with proper PCB layout, but the EP pad must NOT be left unconnected.
Decouple VDD with a 100 nF X7R ceramic capacitor placed within 3 mm of the VDD pin, plus a bulk 4.7 µF tantalum or ceramic capacitor on the same net. For motor-control designs with high dV/dt switching, place a ferrite bead between the digital VDD and analog AVDD supply and add a 10 nF + 100 nF capacitor pair on AVDD. Keep high-current switching traces away from SERCOM lines routed to connectors.
Do not assume 5 V tolerance for any 3.3 V-only Cortex-M0+ competitor parts; the PIC32CM MC00's 5 V I/O tolerance is a key feature for industrial designs. Always configure unused pins as outputs with low state (not high-impedance inputs) to reduce EMI susceptibility. When using the LIN peripheral, ensure the master/slave configuration matches the network topology, and budget for the LIN transceiver's propagation delay when computing response timing.
Separate digital ground (DGND) and analog ground (AGND) planes, joining them at a single point near the MCU's GND pin to avoid ground loops in motor-current sensing. Route the ADC reference voltage trace in a guard ring tied to AGND to prevent digital switching noise from corrupting current-sense measurements. The PIC32CM MC00 family datasheet DS60001638 includes a recommended PCB layout section with reference designs for sensorless FOC motor control.
Informações de conformidade
RoHS and REACH compliant per Microchip product page. AEC-Q100 not explicitly stated for -I grade; the -E grade targets automotive applications. Halogen-free and lead-free per Microchip packaging documentation. Recent PCN (Future Electronics) added UMC Fab 8N as a second fab site, improving supply continuity.
