PIC32MK0512MCF064T-E/PT - 32-bit 80MHz MCU 512KB Flash TQFP-64 | Microchip
N.º da peça: PIC32MK0512MCF064T-E/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.85 | $6,85 |
| 10 | $6.12 | $61,20 |
| 100 | $5.38 | $538,00 |
| 500 | $4.76 | $2.380,00 |
| 1.000 | $4.25 | $4.250,00 |
PIC32MK0512MCF064T-E/PT Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, volatile data memory, and a rich set of on-chip peripherals. Within the broader semiconductor taxonomy, this device belongs to the 32-bit MCU category, itself a subset of microcontrollers and embedded processors. The microAptiv core sits inside the MIPS32 family and uses a load/store RISC architecture with hardware multiply-accumulate and DSP instructions, allowing engineers to execute sensor-processing algorithms without an external DSP.
Key features include AEC-Q100 automotive-grade qualification, an integrated FPU/DSP, an on-chip 12-bit ADC and high-resolution PWM modules targeted at three-phase motor drive. The part operates from a 2.2 V to 3.6 V supply and is rated for the -40 C to +125 C extended industrial/automotive temperature range. The 64-pin TQFP (PT) package with 10x10 mm body provides ample ground and supply pins for noise-sensitive analog mixed-signal designs.
Architecture-wise, the PIC32MK family supports up to 120 MHz on higher-speed variants and integrates dedicated CAN, USB, and motor-control peripherals. This particular suffix (T-E/PT) specifies tape-and-reel packaging, an extended temperature grade, and the 64-pin TQFP package. The F suffix in the part number designates the Flash density (512 KB), while the trailing CF indicates the motor-control peripheral configuration rather than the general-purpose (GP) variant.
Typical applications include three-phase brushless DC motor drives, industrial PLCs, multi-channel CAN node controllers, robotics and CNC controllers, and renewable-energy power conversion stages. The combination of AEC-Q100 grade and a high-pin-count package also makes it suitable for body electronics modules and automotive HVAC actuators.
When designing with this MCU, allocate at least one ground pin per power pin and follow Microchip's reference manual guidelines for analog/digital supply isolation. The integrated op-amps and comparators can replace external components in current-shunt sensing, but require careful PCB layout to avoid coupling switching noise into the analog front-end.
Alternativas drop-in para PIC32MK0512MCF064T-E/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MK0512MCF064T-E/PT (mesmo formato e footprint) — diferindo em Operating Temperature, Package, USB, ADC, CAN.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MK0512MCF064T-I/PT
✅ Drop-In✓ Em estoque
$4.18 / unidade
Ver ficha técnica →PIC32MK0512MCF064-E/PT
✅ Drop-In✓ Em estoque
$5.18 / unidade
Ver ficha técnica →PIC32MK0512MCM064T-E/PT
✅ Drop-In✓ Em estoque
$5.49 / unidade
Ver ficha técnica →PIC32MK0512GPE064T-E/PT
✅ Drop-In✓ Em estoque
$4.1 / unidade
Ver ficha técnica →PIC32MK0512GPE064T-I/MR
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.72 / unidade
Ver ficha técnica →PIC32MK0512MCF064T-E/PT Classificações máximas e características elétricas
| Core | MIPS32 microAptiv with FPU/DSP |
| CPU Architecture | 32-bit RISC load/store |
| Maximum CPU Frequency | 80 MHz (this suffix); family supports up to 120 MHz |
| Program Flash Memory | 512 KB (512K x 8) |
| Data SRAM | 128 KB |
| Data EEPROM | 4 KB |
| Supply Voltage (VDD) | 2.2 V to 3.6 V |
| Temperatura de operação | -40 C to +125 C (extended, suffix -E) |
| Encapsulamento | 64-pin TQFP (PT), 10 x 10 mm |
| Tipo de montagem | Surface Mount (Tape & Reel, suffix -T) |
| Automotive Qualification | AEC-Q100 |
| Series | PIC32MK General Purpose and Motor Control Family |
Guia de Configuração de Pinos do PIC32MK0512MCF064T-E/PT 64-pin tqfp (pt), 10 x 10 mm
Configuração de pinos para PIC32MK0512MCF064T-E/PT (pacote 64-pin tqfp (pt), 10 x 10 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC32MK0512MCF064T-E/PT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC32MK0512MCF064T-E/PT é adequado para 6 aplicaçãos: Three-Phase BLDC / PMSM Motor Control, Industrial PLC and CAN Node Controllers, Robotics and CNC Motion Controllers, Renewable Energy Power Conversion, Automotive HVAC and Body Electronics, Industrial IoT Edge Gateways.
Three-Phase BLDC / PMSM Motor Control
The PIC32MK0512MCF064T-E/PT's dedicated high-resolution PWM modules, integrated op-amps, and on-chip comparators make it well suited to three-phase BLDC and PMSM motor drives. With 80 MHz core clock, 512 KB Flash, and 128 KB SRAM, the device executes field-oriented control (FOC) loops well within the PWM switching period, while its AEC-Q100 qualification supports under-hood automotive and industrial servo drives. The 64-pin TQFP exposes sufficient analog channels for current shunt sensing on all three phases simultaneously, and the 2.2-3.6 V supply range supports direct 3.3 V logic interfaces. Engineers typically pair this MCU with a gate driver IC such as the Microchip MCP8024 or external MOSFET bridge.
Recomendado
Industrial PLC and CAN Node Controllers
Multi-channel CAN connectivity combined with 512 KB Flash makes the PIC32MK0512MCF064T-E/PT a strong candidate for industrial PLC slave modules and distributed CAN nodes. The MCU's AEC-Q100 grade ensures reliable operation in factory-floor environments with extended -40 C to +125 C ambient. With 128 KB of SRAM, the device holds multiple CAN message buffers and Modbus/CANopen protocol stacks without external memory. The 64-pin TQFP exposes enough GPIO to drive indicator LEDs, relay outputs, and digital input conditioning directly. Combined with Microchip's CAN FD library and MPLAB Harmony code generation, designers achieve a production-ready industrial node.
Recomendado
Robotics and CNC Motion Controllers
The PIC32MK0512MCF064T-E/PT's MIPS32 microAptiv core with FPU/DSP extensions provides the math throughput needed for robotics kinematics, CNC interpolation, and trajectory planning. Its 80 MHz clock executes matrix transforms and PID loops in single-digit microseconds, while 512 KB Flash holds full real-time operating systems (FreeRTOS, Harmony) and motion firmware. The integrated 12-bit ADC and quadrature encoder interfaces streamline closed-loop servo control. The 64-pin TQFP supports multiple stepper/servo axis drivers with adequate headroom for endstop and limit-switch inputs. This combination suits pick-and-place machines, small CNC mills, and collaborative robot controllers.
Recomendado
Renewable Energy Power Conversion
Solar micro-inverters, small wind turbine controllers, and battery management peripherals benefit from the PIC32MK0512MCF064T-E/PT's high-resolution PWM and DSP capabilities. The MCU implements MPPT algorithms for photovoltaic panels with sufficient cycles left for grid-synchronization code and safety logic. AEC-Q100 qualification ensures reliability in outdoor enclosure environments with wide temperature swings, while 512 KB Flash stores multiple inverter operating profiles. The integrated 12-bit ADC reads panel voltage and current with simultaneous sampling, and the 64-pin TQFP exposes analog channels for isolated current sensing.
Recomendado
Automotive HVAC and Body Electronics
Automotive HVAC actuators, electric water pumps, and body control modules are target use cases for the PIC32MK0512MCF064T-E/PT, leveraging its AEC-Q100 grade and LIN/CAN connectivity. The MCU's 80 MHz core handles both motor-control loops and CAN/LIN communication stacks concurrently, while 4 KB EEPROM stores calibration and vehicle-specific parameters. The 64-pin TQFP supports multi-fan or multi-valve control with adequate analog inputs for NTC temperature sensing. Production designs integrate this MCU with Microchip's LIN transceiver family for body-domain networks.
Recomendado
Industrial IoT Edge Gateways
The PIC32MK0512MCF064T-E/PT's combination of 512 KB Flash, integrated CAN, USB, and DSP extensions supports edge gateway nodes that aggregate sensor data and run preprocessing analytics before forwarding to the cloud. Its extended temperature rating and AEC-Q100 grade allow deployment in factory-edge enclosures with limited climate control. The MCU runs lightweight TCP/IP stacks via external PHYs and supports secure boot via on-chip Flash partitioning. The 64-pin TQFP provides multiple UART/SPI interfaces for sensor aggregation, with 4 KB EEPROM used for device identity and configuration.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MK0512MCF064T-E/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MK0512MCF064T-I/PT | PIC32MK0512MCF064-E/PT | PIC32MK0512MCM064T-E/PT | PIC32MK0512GPE064T-E/PT |
|---|---|---|---|---|---|
| Package | TQFP-64 (PT), 10x10 mm | TQFP-64 (PT), 10x10 mm - same | TQFP-64 (PT), 10x10 mm - same | TQFP-64 (PT) - same | TQFP-64 (PT) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv | MIPS32 microAptiv |
| CPU Frequency | 80 MHz | 120 MHz | 80 MHz | 80 MHz | 120 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Motor Control Peripherals | Yes (high-resolution PWM + op-amps) | Yes | Yes | Yes | No (general purpose) |
| Temperature Grade | -40 C to +125 C (extended) | -40 C to +85 C (industrial) | -40 C to +125 C (extended) | -40 C to +125 C (extended) | -40 C to +125 C (extended) |
| AEC-Q100 Qualified | Yes | Yes (typically) | Yes | Yes | Yes (typically) |
Principais diferenciais
- Dedicated motor-control peripheral set with on-chip op-amps and high-resolution PWM (vs PIC32MK0512GPE064T-E/PT)
- Extended temperature grade (-40 C to +125 C) with AEC-Q100 qualification (vs PIC32MK0512MCF064T-I/PT)
- Microchip-recommended drop-in upgrade path with errata fixes (vs PIC32MK0512MCM064T-E/PT)
Notas de projeto
Estimated: At VDD=3.3 V, 80 MHz operation, the PIC32MK0512MCF064T-E/PT typically draws ~80 mA core current during active FOC loops and <5 mA in sleep. Decouple each VDD/VDDIO pair with 100 nF X7R ceramic caps placed within 3 mm of the pins, and add a bulk 10 uF tantalum or ceramic close to the package. Use a ferrite bead between analog AVDD and digital VDD to isolate switching noise.
At extended temperature (-40 C to +125 C), ensure the TQFP-64 package dissipation stays below approximately 1 W for reliable operation. For motor-control applications with high PWM switching activity, design the PCB with a copper pour connected to the central thermal pad of the TQFP and to multiple ground pins. In enclosed enclosures, derate output current and CPU clock accordingly.
Do not exceed the 3.6 V absolute maximum on any I/O pin - transient suppressors are required if the design interfaces with 5 V logic or automotive load-dump environments. Configure unused pins as digital outputs (not floating) to minimize current leakage, and avoid routing analog signals adjacent to high-frequency PWM traces. Always consult the latest Microchip errata (DS80000496 family) for known silicon revisions.
Informações de conformidade
RoHS, REACH and AEC-Q100 compliance verified per Hotenda/Microchip listings as of 2026-09-30. Halogen-free status not explicitly confirmed in available data.
