PIC32MK1024MCM100-I/PT - 120MHz MCU, 1MB Flash, Motor Control | Microchip
N.º da peça: PIC32MK1024MCM100-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $13.33 | $13,33 |
| 10 | $12 | $120,00 |
| 100 | $10.67 | $1.067,00 |
| 500 | $9.45 | $4.725,00 |
| 1.000 | $8.4 | $8.400,00 |
PIC32MK1024MCM100-I/PT Visão geral
A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a 32-bit processor core, program and data memory, and a broad set of peripherals including timers, communication interfaces, and analog blocks. Within the semiconductor hierarchy, a microcontroller sits below microprocessors in raw compute power but above simple digital logic in integration density. The PIC32MK family extends the PIC32 architecture by adding a single-precision/double-precision Floating Point Unit (FPU), MicroMIPS compressed instruction mode (up to 40% smaller code), four 64-bit accumulators, and a single-cycle hardware MAC supporting saturating and fractional math — features that target DSP-grade signal processing typically required in field-oriented control (FOC) loops.
Key features include a 120 MHz core with DSP extensions, hardware ECC on Flash, dual-panel Flash supporting Live Update firmware upgrades, multiple 12-bit ADC modules suitable for current sensing in motor drives, dedicated motor-control PWM peripherals, USB Full-Speed, CAN-FD, and a rich mix of UART/SPI/I2C interfaces. Operating voltage spans 2.3 V to 3.6 V (commonly 2.5 V/3.3 V rails) and the industrial temperature range is -40 °C to +85 °C.
Architecturally, the device pairs a Harvard-style bus with tightly-coupled SRAM, enabling deterministic interrupt latency critical for tight current-control loops. The dual-panel Flash allows simultaneous read-while-write, enabling Live Update field firmware replacement without downtime — an important reliability feature for industrial and IIoT systems that cannot be taken offline.
Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, industrial PLCs, multi-channel data acquisition, predictive maintenance sensor hubs, and IIoT edge nodes requiring on-chip DSP, FPU and CAN-FD communication.
When designing with this MCU, allocate sufficient PCB area for the 12x12 mm TQFP footprint and ensure decoupling is placed close to all VDD/VSS pairs. Choose the -I/PT industrial variant for commercial/industrial use, or step up to the -E/PT extended-temperature variant for harsh environments.
This page synthesizes distributor pricing, drop-in alternatives from the PIC32MK and PIC32CM families, and practical design notes not aggregated on the manufacturer datasheet front page.
Alternativas drop-in para PIC32MK1024MCM100-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MK1024MCM100-I/PT (mesmo formato e footprint) — diferindo em ADC, Package, Core Architecture, Program Memory (Flash), Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MK1024MCM100T-I/PT
✅ Drop-In✓ Em estoque
$5.82 / unidade
Ver ficha técnica →PIC32MK1024MCF100-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MK1024MCM064-I/PT
✅ Drop-In✓ Em estoque
$9.05 / unidade
Ver ficha técnica →PIC32MK1024GPG100-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
DSPIC33EP512MU810-I/PT
✅ Drop-In✓ Em estoque
$7.78 / unidade
Ver ficha técnica →PIC32MK1024MCM100-I/PT Classificações máximas e características elétricas
| Core Architecture | MIPS32 microAptiv |
| Core Width | 32-bit |
| Maximum CPU Clock | 120 MHz |
| Program Memory (Flash) | 1 MB (1M x 8) with hardware ECC |
| SRAM | 256 KB |
| FPU | Single and double precision |
| DSP Extensions | 4 x 64-bit accumulators, single-cycle MAC, saturating/fractional math |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Faixa de temperatura de operação | -40 °C to +85 °C (industrial) |
| Encapsulamento | 100-pin TQFP (12 x 12 mm) |
| Tipo de montagem | Surface Mount |
| ADC | 12-bit, multiple modules for motor control current sensing |
| Communication Interfaces | USB Full-Speed, CAN-FD, UART, SPI, I2C |
| Motor Control PWMs | Dedicated motor-control PWM peripherals |
| Live Update Flash | Dual-panel Flash supporting read-while-write |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do PIC32MK1024MCM100-I/PT 100-pin tqfp (12 x 12 mm)
Configuração de pinos para PIC32MK1024MCM100-I/PT (pacote 100-pin tqfp (12 x 12 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para PIC32MK1024MCM100-I/PT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PIC32MK1024MCM100-I/PT é adequado para 6 aplicaçãos: Brushless DC (BLDC) Motor Drive, Permanent Magnet Synchronous Motor (PMSM) Servo Drive, Industrial PLC and Programmable Logic Controller, Multi-Channel Data Acquisition System, IIoT Edge Node with Predictive Maintenance, Automotive Body and Chassis Module.
Brushless DC (BLDC) Motor Drive
The PIC32MK1024MCM100-I/PT is purpose-built for BLDC motor control with on-chip dedicated motor-control PWMs that generate complementary 3-phase outputs with programmable dead-time and fault inputs. The 120 MHz microAptiv core executes field-oriented control (FOC) math in single-cycle hardware MAC plus single/double-precision FPU, sustaining current-loop rates well under 10 µs. Multiple 12-bit ADC modules sample phase currents simultaneously for sensorless and sensored BLDC commutation. The 1 MB ECC Flash holds full FOC libraries and the 256 KB SRAM keeps lookup tables for sine/cosine and SVM. Live Update dual-panel Flash enables in-field firmware upgrades without stopping the motor.
Recomendado
Permanent Magnet Synchronous Motor (PMSM) Servo Drive
The PIC32MK1024MCM100-I/PT runs PMSM servo loops with deterministic interrupt latency from its Harvard bus and tightly-coupled SRAM, achieving sub-µs torque-loop updates at 120 MHz. The hardware FPU handles Park/Clarke transforms in floating point without integer scaling losses. CAN-FD on-chip streams real-time torque, position, and telemetry data to the industrial controller. USB Full-Speed provides a debug/service channel during commissioning. Industrial -40 °C to +85 °C temperature grade supports factory-floor cabinets.
Recomendado
Industrial PLC and Programmable Logic Controller
The PIC32MK1024MCM100-I/PT fits mid-range industrial PLCs with 1 MB ECC Flash for IEC 61131-3 ladder/structured-text programs and 256 KB SRAM for runtime data and scan tables. The on-chip 12-bit ADCs read analog process variables (pressure, flow, temperature) and the dedicated PWMs drive analog-output rails. CAN-FD and UART/SPI/I2C interfaces connect to distributed I/O slices and HMIs. Hardware ECC on Flash ensures long-term reliability in unattended plant installations.
Recomendado
Multi-Channel Data Acquisition System
The PIC32MK1024MCM100-I/PT powers multi-channel industrial data acquisition systems, using multiple 12-bit ADC modules to sample voltages, currents, and sensor signals simultaneously without external multiplexing. The 120 MHz core buffers and packetizes samples to USB Full-Speed for real-time host logging or to CAN-FD for distributed sensor aggregation. The 1 MB Flash stores calibration coefficients and the 256 KB SRAM buffers DMA transfers, preventing sample loss during network congestion.
Recomendado
IIoT Edge Node with Predictive Maintenance
The PIC32MK1024MCM100-I/PT is an excellent IIoT edge node for predictive maintenance, leveraging its DSP/MAC engine to run vibration FFTs and RMS calculations directly on vibration and acoustic sensor streams. The 12-bit ADC captures multi-axis accelerometer data, while the FPU speeds up spectral analysis and anomaly detection. CAN-FD streams alerts upstream to the plant historian, and USB Full-Speed supports local config/diagnostics. Industrial temperature grade supports unconditioned cabinet deployment.
Recomendado
Automotive Body and Chassis Module
Although not AEC-Q100 qualified itself, the PIC32MK1024MCM100-I/PT is widely used in non-safety automotive body and chassis modules such as HVAC actuators, seat controllers, and lighting drivers where CAN-FD communication to the vehicle bus is required. The 120 MHz MIPS32 core runs Body Control Module firmware, the dedicated PWMs drive motors and LED strings, and the USB interface supports OEM diagnostics during assembly. For AEC-Q100-qualified automotive applications, Microchip offers PIC32MK Q1 variants.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MK1024MCM100-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MK1024MCM100T-I/PT | PIC32MK1024MCF100-I/PT | PIC32MK1024MCM064-I/PT | PIC32MK1024GPG100-I/PT | DSPIC33EP512MU810-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-pin TQFP (12x12 mm) | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same | 100-pin TQFP (12x12 mm) - same |
| Core | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | MIPS32 microAptiv 32-bit | dsPIC 16-bit DSC |
| Max Clock | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 70 MHz |
| Flash | 1 MB ECC | 1 MB ECC | 1 MB ECC | 64 KB | 1 MB ECC | 512 KB |
| SRAM | 256 KB | 256 KB | 256 KB | 64 KB | 256 KB | 48 KB |
| FPU | Yes (single/double precision) | Yes (single/double precision) | Yes (single/double precision) | Yes (single/double precision) | Yes (single/double precision) | No (integer DSP) |
| CAN-FD | Yes | Yes | Yes | Yes | Yes | No (CAN 2.0B only) |
| Operating Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 3.0 V to 3.6 V |
Principais diferenciais
- Highest Flash density in the 100-pin PIC32MK TQFP family (vs PIC32MK1024MCM064-I/PT)
- 32-bit MIPS core with hardware FPU versus 16-bit dsPIC DSC (vs DSPIC33EP512MU810-I/PT)
- Live Update dual-panel Flash for in-field firmware upgrades (vs PIC32MK1024MCF100-I/PT)
Notas de projeto
Decoupling is critical for the PIC32MK1024MCM100-I/PT. Place a 100 nF X7R ceramic capacitor on every VDD/VSS pin pair within 3 mm of the pin, plus one 4.7 µF bulk capacitor per voltage rail. Add a 10 µF tantalum or polymer bulk near the MCU. Insufficient decoupling causes ADC noise and PWM jitter. Use a ferrite bead on AVDD to isolate analog supply noise from switching PWMs and CAN-FD transients.
Estimated: at maximum 120 MHz clock and 3.6 V supply, the PIC32MK1024MCM100-I/PT core current reaches roughly 80 mA (288 mW). The 100-pin TQFP has theta_JA around 50 °C/W on a 4-layer JEDEC test PCB, producing a 14 °C temperature rise. Industrial -40 °C to +85 °C ambient rating provides ample margin, but in sealed enclosures we recommend thermal vias under the exposed pad and at least 4-layer copper pours. Verify with thermocouple in worst-case duty cycle.
The 100-pin TQFP (12x12 mm) has 0.5 mm pitch leads — solder paste stencil aperture should be 0.4 mm wide with 100 µm thickness for reliable reflow. Place all 100 pins on top copper and route out on inner layers for short stub-free traces. Avoid placing the MCU near switching power inductors; motor-control applications should keep the MCU 30 mm away from the gate-driver switching node to avoid PWM-edge noise coupling into ADC samples.
Do not confuse the I/PT industrial grade with the E/PT extended-temperature grade when ordering — the latter runs -40 °C to +125 °C but may have different test coverage. Always configure the unused I/O pins as outputs (not inputs) to avoid floating-pin current leakage on industrial boards. The dual-panel Live Update Flash requires firmware to follow Microchip's BTLD (Bootloader) guidelines; jumping between panels without proper bank-switching can brick the device.
Informações de conformidade
RoHS compliant per LCSC and JLCPCB listings. Industrial -40 °C to +85 °C grade but not AEC-Q100 qualified for automotive safety; Microchip offers PIC32MK Q1 variants separately for AEC-Q100 requirements.