PIC32MM0016GPL020-I/SS - 32-bit 25MHz 16KB MCU | Microchip
N.º da peça: PIC32MM0016GPL020-I/SS ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $1.95 | $1,95 |
| 10 | $1.78 | $17,80 |
| 100 | $1.49 | $149,00 |
| 500 | $1.27 | $635,00 |
| 1.000 | $1.1 | $1.100,00 |
PIC32MM0016GPL020-I/SS Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals on one die, forming the core of any embedded system. Within the broader hierarchy, this part is a 32-bit microcontroller in the ARM/MIPS class, targeting applications that need more processing headroom than 8-bit MCUs but lower power and cost than application processors. The PIC32MM family specifically targets ultra-low-power XLP (eXtreme Low Power) designs with sleep currents as low as 500 nA, making it a hybrid between classic 8-bit PIC XLP parts and higher-end Cortex-M devices.
Key features of this part include 79 CoreMark performance at 25 MHz, integrated 10/12-bit ADC support, up to 20 GPIO pins, ICSP/debug interface, boundary scan, and a wide 2.5V/3.3V operating voltage range with low-power sleep modes. The microAptiv UC core combines deterministic interrupt response with low gate count, optimized for control loops and event-driven firmware. The 20-pin SSOP (5.30 mm body) suits hand-held and industrial sensor modules.
Typical applications include IoT sensor nodes, wearable fitness/health devices, low-power remote controls, battery-powered instrumentation, and small home-automation controllers. Designers should evaluate whether 16 KB program memory and 4 KB RAM are sufficient for the chosen RTOS or application stack, and confirm the 20-pin count matches their peripheral I/O budget before committing to PCB layout.
Alternativas drop-in para PIC32MM0016GPL020-I/SS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MM0016GPL020-I/SS (mesmo formato e footprint) — diferindo em ADC, Package, Operating Temperature, Sleep Current (XLP), Instruction Set.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MM0032GPL020-I/SS
✅ Drop-In✓ Em estoque
$1.45 / unidade
Ver ficha técnica →PIC32MM0064GPL020-I/SS
✅ Drop-In✓ Em estoque
$1.78 / unidade
Ver ficha técnica →PIC32MM0016GPL020-E/SS
✅ Drop-In✓ Em estoque
$1.18 / unidade
Ver ficha técnica →PIC32MM0032GPL020-I/SS
✅ Drop-In✓ Em estoque
$1.45 / unidade
Ver ficha técnica →PIC32MX110F016B-I/SS
✅ Drop-In✓ Em estoque
$1.84 / unidade
Ver ficha técnica →PIC32MX130F064B-I/SS
✅ Drop-In✓ Em estoque
$2.43 / unidade
Ver ficha técnica →PIC32MM0016GPL020-I/SS Classificações máximas e características elétricas
| Core Architecture | MIPS32 microAptiv UC |
| Largura do barramento de dados | 32-bit |
| Frequência máxima de clock | 25 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 16 KB (16K x 8) |
| RAM Size | 4 KB |
| CoreMark Score | 79 (at 25 MHz) |
| Operating Voltage Range | 2.0V to 3.6V |
| Number of I/O Pins | 20 GPIO |
| ADC | 10/12-bit integrated |
| Encapsulamento | 20-pin SSOP (5.30 mm) |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | -40C to +85C (industrial) |
| Sleep Current (XLP) | 500 nA typical (per family datasheet) |
| Status RoHS | Compliant |
Configuração de pinos do PIC32MM0016GPL020-I/SS
| Pino 1 | RA0 — GPIO / analog input |
| Pino 2 | RA1 — GPIO / analog input |
| Pino 3 | RA2 — GPIO / analog input |
| Pino 4 | RA3 — GPIO / analog input |
| Pino 5 | RA4 — GPIO / analog input |
| Pino 6 | VDD — Positive supply voltage (2.0-3.6V) |
| Pino 7 | VSS — Ground reference |
| Pino 8 | RA5 — GPIO / analog input |
| Pino 9 | RA6 — GPIO / analog input |
| Pino 10 | RA7 — GPIO / analog input |
| Pino 11 | RB0 — GPIO / programming pin |
| Pino 12 | RB1 — GPIO / programming pin |
| Pino 13 | RB2 — GPIO |
| Pino 14 | RB3 — GPIO |
| Pino 15 | RB4 — GPIO |
| Pino 16 | RB5 — GPIO |
| Pino 17 | RB6 — GPIO / ICSP PGECx |
| Pino 18 | RB7 — GPIO / ICSP PGEDx |
| Pino 19 | VSS — Ground reference |
| Pino 20 | VDD — Positive supply voltage (2.0-3.6V) |
Aplicações típicas
PIC32MM0016GPL020-I/SS é adequado para 6 aplicaçãos: Battery-Powered IoT Sensor Nodes, Wearable Health and Fitness Devices, Low-Power Remote Controls, Industrial Sensor Modules, Smart Home Edge Nodes, Portable Medical Monitoring Devices.
Battery-Powered IoT Sensor Nodes
The PIC32MM0016GPL020-I/SS fits battery-powered IoT sensor nodes because its PIC32MM GPL family achieves XLP sleep currents down to 500 nA (per Microchip PIC32MM GPL datasheet). The 32-bit microAptiv UC core at 25 MHz delivers 79 CoreMark, enough headroom to process sensor data and run BLE/Zigbee stacks before returning to deep sleep. With 16 KB Flash and 4 KB SRAM, the MCU accommodates lightweight firmware plus a real-time scheduler. Powered directly from a CR2032 or Li-ion cell at 2.0-3.6V, it eliminates the need for an external LDO.
Recomendado
Wearable Health and Fitness Devices
Wearable fitness bands and heart-rate monitors benefit from the PIC32MM0016GPL020-I/SS's combination of low power and small 20-pin SSOP footprint. The integrated 10/12-bit ADC handles direct sensor signal conditioning for PPG and temperature channels, while XLP sleep modes keep quiescent current under 1 uA between samples. The microAptiv UC core's deterministic interrupt latency suits precise timing of sensor acquisition windows. Industrial -40C to +85C operation covers body-temperature ranges during exercise.
Recomendado
Low-Power Remote Controls
The PIC32MM0016GPL020-I/SS suits handheld remote controls where battery replacement cost dominates product economics. Its 25 MHz microAptiv UC core executes IR/RF protocol encoding with cycles to spare, then enters XLP sleep until the next button event. The 20-pin SSOP package gives enough GPIO for typical key-scan matrices plus an LED indicator. With 16 KB Flash, designers can implement multiple protocol stacks (RC5, NEC, BLE HID) without external memory.
Recomendado
Industrial Sensor Modules
Industrial 4-20 mA loop-powered sensors and small PLC I/O modules use the PIC32MM0016GPL020-I/SS for its industrial temperature range and deterministic 32-bit performance. The 79 CoreMark score at 25 MHz runs PID control loops and Modbus RTU stacks comfortably, while the 10/12-bit ADC integrates directly with analog transducers. The wide 2.0-3.6V supply tolerates 24V industrial rails via simple LDO or shunt regulation.
Recomendado
Smart Home Edge Nodes
Smart-home edge devices (battery contact sensors, smart blinds, occupancy detectors) leverage the PIC32MM0016GPL020-I/SS's XLP sleep currents and small 20-pin SSOP footprint. The MCU's Cortex-class interrupt controller (microAptiv UC equivalent) wakes within a few microseconds, processes a Zigbee or Thread frame, and returns to sleep, achieving multi-year coin-cell life. MPLAB X Harmony framework support accelerates LoRa/Wi-Fi co-processor integration.
Recomendado
Portable Medical Monitoring Devices
Portable medical monitors (pulse oximeters, glucose meters, thermometers) use the PIC32MM0016GPL020-I/SS for its low power, integrated ADC, and Microchip's medical-grade quality documentation. The microAptiv UC core executes signal-processing firmware for SpO2 or temperature algorithms, while the 4 KB SRAM buffers sensor sample windows. The 2.0-3.6V supply is well-matched to single-cell Li-ion or 2x AAA batteries common in handheld medical devices.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MM0016GPL020-I/SS — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MM0032GPL020-I/SS | PIC32MM0064GPL020-I/SS | PIC32MM0016GPL020-E/SS | PIC32MX110F016B-I/SS | PIC32MX130F064B-I/SS |
|---|---|---|---|---|---|---|
| Package | 20-pin SSOP (5.30 mm) | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same | 20-pin SSOP - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 16 KB | 32 KB | 64 KB | 16 KB | 16 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 8 KB | 4 KB | 4 KB | 8 KB |
| Max Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 40 MHz | 40 MHz |
| Core Architecture | MIPS32 microAptiv UC | MIPS32 microAptiv UC | MIPS32 microAptiv UC | MIPS32 microAptiv UC | MIPS32 M4K | MIPS32 M4K |
| Operating Voltage | 2.0-3.6V | 2.0-3.6V | 2.0-3.6V | 2.0-3.6V | 2.3-3.6V | 2.3-3.6V |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +85C (industrial) | -40C to +125C (extended) | -40C to +85C (industrial) | -40C to +85C (industrial) |
| Unit Price (qty 1, USD) | $1.95 | $2.10 | $2.35 | $2.05 | $2.40 | $2.85 |
Principais diferenciais
- Lowest-power 32-bit PIC MCU with 500 nA XLP sleep current (vs PIC32MX110F016B-I/SS)
- Same package, larger memory upgrade path (vs PIC32MM0064GPL020-I/SS)
- Best cost-per-MIPS in 32-bit PIC at 25 MHz (vs PIC32MM0032GPL020-I/SS)
Notas de projeto
Estimated: at 3.3V active @25 MHz the core draws ~6 mA (per family datasheet). For battery designs, exploit the XLP sleep mode (500 nA typical) with a 32 kHz secondary oscillator for RTC wake-ups; duty-cycle below 1% yields years of coin-cell life. Always use the internal LDO regulator mode rather than the core voltage regulator bypass to retain sleep-mode efficiency.
Place decoupling capacitors (100 nF ceramic + 1 uF bulk) within 5 mm of each VDD/VSS pin pair. The SSOP-20 has two VDD pins (pin 6 and pin 20) and two VSS pins (pin 7 and pin 19); populate both pairs independently. Add a ground pour under the IC body to provide a low-impedance return for the ADC and switching I/O.
Do not confuse the -I/SS industrial variant with the -E/SS extended temperature variant when sourcing for outdoor or automotive-grade products - the -I/SS is rated only to +85C. For field-deployed sensors in direct sunlight, select the -E/SS variant (PIC32MM0016GPL020-E/SS) instead. Also confirm the ICSP pins (PGECx/PGEDx) are not inadvertently re-claimed by user firmware without disabling in-flight programming.
Informações de conformidade
RoHS and REACH compliant per Microchip product page. Not AEC-Q100 qualified - not recommended for automotive safety applications. Industrial temperature grade only.
