PIC32MX154F128D-I/PT - 72MHz XLP MCU, 128KB Flash | Microchip
N.º da peça: PIC32MX154F128D-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $7.17 | $7,17 |
| 10 | $6.45 | $64,50 |
| 100 | $5.74 | $574,00 |
| 500 | $5.17 | $2.585,00 |
| 1.000 | $4.65 | $4.650,00 |
PIC32MX154F128D-I/PT Visão geral
A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as timers, communication interfaces, and ADCs. The PIC32MX154 family belongs to the broader 32-bit MCU category, sitting in the hierarchy as: 32-bit MCU -> MIPS M4K architecture -> PIC32 family -> PIC32MX1/2 series -> XLP sub-family. Compared to 8-bit MCUs, 32-bit parts execute instructions faster, address more memory, and handle complex protocols like USB, Ethernet, and graphics.
Key features of this part include a 5-stage MIPS pipeline for 1.55 DMIPS/MHz performance, peripheral pin select (PPS) for flexible I/O mapping, and CTMU (Charge Time Measurement Unit) for capacitive touch sensing. Code protection is configurable, and in-circuit serial programming (ICSP) is supported via two pins, enabling field firmware updates. The XLP technology provides sleep currents down to and run currents down to , making it suitable for battery-powered designs.
Technically, the PIC32MX154F128D uses a Harvard architecture with separate 32-bit instruction and data paths, and includes a prefetch cache to mitigate Flash wait states at 72MHz. It provides up to 35 general-purpose I/O pins, multiple communication peripherals including I2C, SPI, UART, and USB, plus 5 16-bit timers/counters. The CTMU enables touch-sensing and precise time measurement, while the RTCC module maintains time-of-day with backup power support.
Typical applications include consumer electronics (small appliances, remote controls), industrial control (sensor interfaces, low-power data loggers), USB peripherals (HID devices, CDC virtual COM ports), and IoT edge nodes (battery-powered wireless sensor hubs). The 44-pin TQFP package offers generous I/O count for human-interface and motor-control subsystems, while the XLP modes extend battery life in portable designs.
When designing with this part, allocate proper decoupling on VDD/AVDD pairs and follow Microchip AN-HarmonicDistortion guidelines for ADC accuracy. The USB interface requires precise 48MHz clock derivation from the 8MHz primary oscillator with the PLL configured per the family reference manual.
This page synthesizes current distributor pricing, parametric alternatives from the same PIC32MX1xx family, and practical design notes that go beyond the manufacturer datasheet, giving engineers a fast comparison and selection reference.
Alternativas drop-in para PIC32MX154F128D-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MX154F128D-I/PT (mesmo formato e footprint) — diferindo em ADC, Package, I/O Pins, Timers, USB.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MX154F128D-I/ML
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.92 / unidade
Ver ficha técnica →PIC32MX274F128D-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX174F256D-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.21 / unidade
Ver ficha técnica →PIC32MX254F128D-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
Consulte o preço
Ver ficha técnica →PIC32MX150F128D-I/PT
✅ Drop-In✓ Em estoque
$2.51 / unidade
Ver ficha técnica →PIC32MX130F128D-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX154F128DT-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX154F128D-I/PT Classificações máximas e características elétricas
| Core Architecture | MIPS32 M4K |
| Core Bit Width | 32-bit |
| Max CPU Frequency | 72 MHz |
| Performance | 1.55 DMIPS/MHz |
| Flash Program Memory | 128 KB (128K x 8) |
| SRAM | 32 KB |
| Operating Voltage Range | 2.3 V to 3.6 V |
| I/O Pins | Up to 35 |
| ADC | 10-bit, 1 MSPS, up to 16 channels |
| Analog Comparators | 3 |
| USB | USB 2.0 Full-Speed OTG |
| Timers | 5 x 16-bit |
| Communication Interfaces | I2C, SPI, UART, USB |
| RTCC | Yes (Real-Time Clock and Calendar) |
| CTMU | Yes (Charge Time Measurement Unit) |
| Faixa de temperatura de operação | -40 C to +85 C (Industrial) |
| Encapsulamento | 44-pin TQFP (PT), 10x10 mm |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 |
| Status RoHS | Compliant |
Configuração de pinos do PIC32MX154F128D-I/PT
| Pino 1 | RPB0/PWM1 — Remappable I/O, PWM output |
| Pino 2 | RPB1/PWM2 — Remappable I/O, PWM output |
| Pino 3 | RPB2 — Remappable I/O |
| Pino 4 | RPB3 — Remappable I/O |
| Pino 5 | VDD — Core logic supply voltage |
| Pino 6 | VSS — Ground reference |
| Pino 7 | RPB4 — Remappable I/O |
| Pino 8 | RPB5 — Remappable I/O |
| Pino 9 | RPC0 — Remappable I/O |
| Pino 10 | RPC1 — Remappable I/O |
| Pino 11 | RPC2 — Remappable I/O |
| Pino 12 | RPC3 — Remappable I/O |
| Pino 13 | RPC4 — Remappable I/O |
| Pino 14 | RPC5 — Remappable I/O |
| Pino 15 | VSS — Ground reference |
| Pino 16 | VDD — Core logic supply voltage |
| Pino 17 | AVDD — Analog supply voltage |
| Pino 18 | AVSS — Analog ground |
| Pino 19 | RPD10/RTC — Remappable I/O, RTCC input |
| Pino 20 | RPD11 — Remappable I/O |
| Pino 21 | VSS — Ground reference |
| Pino 22 | VDD — Core logic supply voltage |
| Pino 23 | RPD0 — Remappable I/O |
| Pino 24 | RPD1 — Remappable I/O |
| Pino 25 | RPD2 — Remappable I/O |
| Pino 26 | RPD3 — Remappable I/O |
| Pino 27 | RPD4 — Remappable I/O |
| Pino 28 | RPD5 — Remappable I/O |
| Pino 29 | RPD6 — Remappable I/O |
| Pino 30 | RPD7 — Remappable I/O |
| Pino 31 | RPD8 — Remappable I/O |
| Pino 32 | RPD9 — Remappable I/O |
| Pino 33 | RPG6 — Remappable I/O |
| Pino 34 | RPG7 — Remappable I/O |
| Pino 35 | RPG8 — Remappable I/O |
| Pino 36 | RPG9 — Remappable I/O |
| Pino 37 | VSS — Ground reference |
| Pino 38 | VDD — Core logic supply voltage |
| Pino 39 | OSC1/CLKI — Crystal oscillator input or external clock |
| Pino 40 | OSC2/CLKO — Crystal oscillator output |
| Pino 41 | VBUS — USB VBUS sense input |
| Pino 42 | D+ — USB D+ data line |
| Pino 43 | D- — USB D- data line |
| Pino 44 | MCLR — Master clear (reset) input |
Aplicações típicas
PIC32MX154F128D-I/PT é adequado para 7 aplicaçãos: USB HID Peripheral Devices, Battery-Powered IoT Sensor Nodes, Industrial Control and Data Logging, Consumer Audio and Display Controllers, USB CDC Virtual COM Port Bridges, Touch-Sensing User Interfaces, Educational and Prototyping Platforms.
USB HID Peripheral Devices
The PIC32MX154F128D-I/PT is well suited for USB Human Interface Devices such as keyboards, mice, game controllers, and custom HID peripherals. Its integrated USB 2.0 Full-Speed OTG controller with on-chip transceiver eliminates external PHY cost, and the 72MHz MIPS M4K core runs HID stacks with sub-millisecond polling latency. The 128KB Flash holds Microchip's MLA USB stack plus application code, while 32KB SRAM handles report buffers and protocol state. Place a 1uF capacitor on VBUS and 15K pull-down resistors on D+/D- per USB 2.0 specification.
Recomendado
Battery-Powered IoT Sensor Nodes
The PIC32MX154F128D-I/PT supports battery-powered IoT edge devices through its XLP technology offering sleep currents down to the sub-microamp range and active run currents optimized for sensor sampling duty cycles. Operating from 2.3V to 3.6V, it can be powered directly from a single 3V coin cell or Li-ion battery. The 10-bit ADC with 1 MSPS rate handles temperature, humidity, and analog sensor conditioning, while the CTMU enables touch or capacitive proximity wake-up. Add an external sub-GHz transceiver for wireless connectivity.
Recomendado
Industrial Control and Data Logging
Industrial control applications benefit from the PIC32MX154F128D-I/PT's 16-channel 10-bit ADC, 5 16-bit timers for PWM motor control, and RTCC module for time-stamped event logging. The -40C to +85C industrial temperature range supports factory-floor deployment. Its 128KB Flash stores configuration profiles and logged data buffers, while the CTMU provides precision timing for pulse-width measurement. Use the UART peripherals for RS-485 bridges via external transceivers like the MAX485.
Recomendado
Consumer Audio and Display Controllers
The PIC32MX154F128D-I/PT drives small TFT LCD panels and audio playback in consumer appliances such as coffee machines, microwave ovens, and home automation hubs. Its 72MHz CPU comfortably renders text and simple graphics via bit-banged SPI or 8080 interfaces, and the PWM peripherals generate audio tones. With 35 GPIO, the device easily interfaces to keypad matrices, rotary encoders, and LED indicator strips. Use the DMA controller to offload display refresh from the CPU.
Recomendado
USB CDC Virtual COM Port Bridges
USB CDC class devices use the PIC32MX154F128D-I/PT to bridge legacy RS-232 UART peripherals to USB without driver installation on modern operating systems. The integrated USB OTG controller handles enumeration and bulk transfers, while the hardware UART peripherals connect to external MAX232 or similar transceivers. With 128KB Flash, the device hosts both the USB CDC stack and bridge logic, and its 32KB SRAM supports up to 64-byte bulk IN/OUT packets at Full-Speed rates.
Recomendado
Touch-Sensing User Interfaces
Capacitive touch interfaces leverage the PIC32MX154F128D-I/PT's integrated CTMU (Charge Time Measurement Unit) for button, slider, and wheel sensing without dedicated touch controllers. The CTMU measures capacitance changes at sub-picofarad resolution using only a few external resistors per channel. The 10-bit ADC captures the analog touch measurements, while DMA handles continuous scanning of up to 16 channels. The 72MHz CPU runs Microchip's mTouch library for proximity and gesture recognition.
Recomendado
Educational and Prototyping Platforms
The PIC32MX154F128D-I/PT is widely used in university curricula and hobbyist projects due to its generous peripheral set, free MPLAB X IDE, and the affordable PIC32MX Curiosity development board. The 44-pin TQFP package is breadboard-friendly with breakout adapters and provides enough I/O for robotics and mechatronics experiments. The 72MHz performance runs FreeRTOS or Micrium uC/OS-III ports smoothly. Code examples and community support on the Microchip forums accelerate learning curves.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MX154F128D-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MX274F128D-I/PT | PIC32MX150F128D-I/PT | PIC32MX130F128D-I/PT | PIC32MX174F256D-I/PT | PIC32MX154F128DT-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin TQFP (PT) | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same | 44-pin TQFP (PT) - same |
| Max CPU Frequency | 72 MHz | 72 MHz | 50 MHz | 40 MHz | 72 MHz | 72 MHz |
| Flash Memory | 128 KB | 256 KB | 128 KB | 128 KB | 256 KB | 128 KB |
| SRAM | 32 KB | 64 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| USB OTG | Yes (Full-Speed) | Yes (Full-Speed) | Yes (Full-Speed) | No | Yes (Full-Speed) | Yes (Full-Speed) |
| Operating Voltage | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V | 2.3 V to 3.6 V |
| ADC Channels | Up to 16 | Up to 16 | Up to 16 | Up to 13 | Up to 16 | Up to 16 |
Principais diferenciais
- Highest CPU frequency in PIC32MX1xx 44-pin XLP family (vs PIC32MX150F128D-I/PT)
- Includes USB 2.0 Full-Speed OTG peripheral (vs PIC32MX130F128D-I/PT)
- Upgrades Flash and SRAM with same TQFP-44 pinout (vs PIC32MX274F128D-I/PT)
Notas de projeto
Place a 10uF bulk capacitor plus a 0.1uF ceramic decoupling capacitor on each VDD/AVDD pair, located within 5mm of the MCU pins. The USB transceiver requires a low-noise 3.3V rail; if powered from a switching regulator, add a ferrite bead and 22uF bulk capacitor on VBUS-derived 3.3V. For XLP sleep modes below 1uA, disconnect any floating analog inputs to prevent leakage paths.
The 44-pin TQFP PIC32MX154F128D-I/PT requires configuration of peripheral pin select (PPS) registers to map UART, SPI, I2C, and timer functions to physical I/O pins. Failing to lock PPS registers causes unintended remapping after reset. Also note that pins shared between ICSP and I/O require careful MCLR pull-up design (typically 10K) to avoid programming issues during development.
Route the 8MHz primary crystal traces (OSC1/OSC2) as short as possible with a ground guard ring, and place the load capacitors within 3mm of the MCU. For USB, route D+ and D- as a 90-ohm differential pair with matched length, and keep them away from switching nodes. Place the VBUS decoupling capacitor (4.7uF) close to the VBUS pin to meet USB inrush current requirements.
When using the 10-bit ADC at 1 MSPS, ensure the analog input source impedance is below 2K ohms to avoid conversion errors. Add an external op-amp buffer (e.g., MCP6001) for high-impedance sensors. AVDD should be filtered with a ferrite bead from VDD; AVSS connects to a clean analog ground plane separate from digital switching currents.
Informações de conformidade
RoHS compliant per Microchip product page. Industrial temperature grade -40C to +85C. Not AEC-Q100 qualified for automotive use; consider PIC32MX1xx automotive variants for vehicle applications.