PIC32MX210F016D-I/PT - 40MHz 32-bit MCU 16KB Flash USB | Microchip
N.º da peça: PIC32MX210F016D-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $3.08 | $30,80 |
| 100 | $2.65 | $265,00 |
| 500 | $2.31 | $1.155,00 |
| 1.000 | $1.96 | $1.960,00 |
| 3.000 | $1.74 | $5.220,00 |
PIC32MX210F016D-I/PT Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. Within the broader taxonomy, the PIC32MX210F016D belongs to the 32-bit MCU family, specifically the MIPS M4K architecture, sitting between 8/16-bit MCUs and application processors in compute hierarchy. It executes instructions at less than 0.5 mA/MHz, making it suitable for USB-powered and battery-constrained designs.
Key differentiating features include 34 I/O ports, an industrial operating temperature range of -40C to +105C, multiple power management modes (Sleep, Idle, Doze), and pin compatibility with most Microchip 16-bit devices, easing migration from legacy PIC24/dsPIC designs. The separate PLLs for CPU and USB clocks allow precise USB 2.0 full-speed timing independent of the system clock.
The architecture combines Harvard bus topology with a 5-stage pipeline, achieving 1.53 DMIPS/MHz. On-chip hardware DMA (up to 4 channels with automatic data size detection) off-loads peripheral data movement from software, and five 16-bit general-purpose timers (with up to two 32-bit timers) provide flexible timing resources for embedded control.
Typical applications include USB human-interface devices (HIDs), capacitive touch keypads (mTouch), small graphics displays via PMP, audio codec interfaces, and industrial sensor hubs. The integrated CTMU enables touch buttons and sliders without external analog front-ends, reducing BOM cost.
When designing with this part, note that PPS remapping must be configured in software before the corresponding peripheral is enabled, and VDD/VUSB decoupling requires both 1uF and 0.1uF ceramic capacitors placed within 3 mm of the pins for USB compliance. Migration to PIC32MX170/230/250/270/274 families is pin-compatible within the same TQFP-44 footprint for future-proofing.
Alternativas drop-in para PIC32MX210F016D-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MX210F016D-I/PT (mesmo formato e footprint) — diferindo em Core Architecture, Timers, Package, Program Memory (Flash), Active Current Consumption.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MX210F016D-V/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX220F032D-I/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC32MX230F064D-I/PT
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
PIC32MX250F128D-I/PT
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.1 / unidade
Ver ficha técnica →PIC32MX210F016D-I/PT Classificações máximas e características elétricas
| Core Architecture | MIPS32 M4K |
| CPU Bit Width | 32-bit |
| Maximum CPU Speed | 40 MHz (66 DMIPS) |
| Performance | 1.53 DMIPS/MHz |
| Program Memory (Flash) | 16 KB (16K x 8) |
| Data SRAM | 4 KB |
| Supply Voltage (VDD) | 2.3 V to 3.6 V |
| USB Supply Voltage (VUSB) | 2.3 V to 3.6 V |
| Active Current Consumption | <0.5 mA/MHz |
| I/O Ports | 34 |
| USB Interface | USB 2.0 Full-Speed Device |
| SPI/I2S Modules | 2 |
| UART Modules | 2 |
| I2C Modules | 2 |
| DMA Channels | Up to 4 |
| Timers | Five 16-bit (up to two 32-bit) |
| CTMU | Yes (Charge Time Measurement Unit) |
| PMP (Parallel Master Port) | Yes |
| PPS (Peripheral Pin Select) | Yes |
| Encapsulamento | 44-pin TQFP (10x10 mm) |
| Faixa de temperatura de operação | -40C to +105C (Industrial) |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 (168 hours) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do PIC32MX210F016D-I/PT
| Pino 1 | RPB0/AN0/C1IND/CTED1/PMA0 — Remappable I/O / Analog input / CTMU input |
| Pino 2 | RPB1/AN1/C1INC/CTED2/PMA1 — Remappable I/O / Analog input / CTMU input |
| Pino 3 | RPB2/AN2/C1INB/C2INB/USBOEN — Remappable I/O / USB output enable |
| Pino 4 | RPB3/AN3/C2INA — Remappable I/O / Analog input |
| Pino 5 | VDD — Positive supply voltage (2.3V-3.6V) |
| Pino 6 | VSS — Ground reference |
| Pino 7 | RPB4/AN4/C1INB — Remappable I/O / Analog input |
| Pino 8 | RPB5/AN5/C1INA — Remappable I/O / Analog input |
| Pino 9 | RPB6/AN6/OC1/PGC — Remappable I/O / ICSP clock |
| Pino 10 | RPB7/AN7/OC2/PGD — Remappable I/O / ICSP data |
| Pino 11 | VSS — Ground reference |
| Pino 12 | RPC0/T1CK — Remappable I/O / Timer1 clock |
| Pino 13 | RPC1/RPC1 — Remappable I/O |
| Pino 14 | RPC2/RPC2 — Remappable I/O |
| Pino 15 | RPC3/RPC3 — Remappable I/O |
| Pino 16 | RPC4/SDO1 — Remappable I/O / SPI1 data out |
| Pino 17 | RPC5/SDI1 — Remappable I/O / SPI1 data in |
| Pino 18 | RPC6/SCK1 — Remappable I/O / SPI1 clock |
| Pino 19 | RPC7/RPC7 — Remappable I/O |
| Pino 20 | VSS — Ground reference |
| Pino 21 | VDD — Positive supply voltage (2.3V-3.6V) |
| Pino 22 | OSC1/CLKI/RC15 — Oscillator crystal input / external clock |
| Pino 23 | OSC2/CLKO/RC13 — Oscillator crystal output / clock output |
| Pino 24 | MCLR/RPA0 — Master clear reset (active low) / Remappable I/O |
| Pino 25 | RPA1/CTED3/PMA2 — Remappable I/O / CTMU / PMP |
| Pino 26 | RPA2/CTED4/PMA3 — Remappable I/O / CTMU / PMP |
| Pino 27 | RPA3/CTED5/PMA5 — Remappable I/O / CTMU / PMP |
| Pino 28 | VUSB — USB transceiver supply voltage |
| Pino 29 | VBUS — USB bus voltage detect |
| Pino 30 | D+ — USB D+ data line |
| Pino 31 | D- — USB D- data line |
| Pino 32 | VSS — Ground reference |
| Pino 33 | VDD — Positive supply voltage (2.3V-3.6V) |
| Pino 34 | RPD0/SDO2 — Remappable I/O / SPI2 data out |
| Pino 35 | RPD1/SDI2 — Remappable I/O / SPI2 data in |
| Pino 36 | RPD2/SCK2 — Remappable I/O / SPI2 clock |
| Pino 37 | RPD3/RPD3 — Remappable I/O |
| Pino 38 | RPD4/RPD4 — Remappable I/O |
| Pino 39 | RPD5/PMD6 — Remappable I/O / PMP data |
| Pino 40 | RPD6/PMD7 — Remappable I/O / PMP data |
| Pino 41 | RPD7/PMD8 — Remappable I/O / PMP data |
| Pino 42 | RPE0/PMD0 — Remappable I/O / PMP data |
| Pino 43 | RPE1/PMD1 — Remappable I/O / PMP data |
| Pino 44 | RPE2/PMD2 — Remappable I/O / PMP data |
Aplicações típicas
PIC32MX210F016D-I/PT é adequado para 6 aplicaçãos: USB HID Devices (Mouse, Keyboard, Custom HID), Capacitive Touch Keypads and Sliders (mTouch), Small Graphics Displays (PMP Parallel Master Port), Audio Codec Interfaces (I2S/SP), Industrial Sensor Hubs and Data Loggers, Battery-Powered IoT Edge Devices.
USB HID Devices (Mouse, Keyboard, Custom HID)
The PIC32MX210F016D-I/PT is well-suited for USB Human Interface Devices because it integrates a USB 2.0 full-speed device controller with dedicated PLL for precise 12 MHz USB timing, plus 16 KB Flash and 4 KB SRAM sufficient for HID class descriptors and report buffers. At 40 MHz the MIPS M4K core executes the USB interrupt service routine with comfortable margin, while PPS remapping simplifies PCB routing of the D+/D- lines. The VUSB pin requires 1uF + 0.1uF ceramic decoupling within 3 mm for USB compliance testing.
Recomendado
Capacitive Touch Keypads and Sliders (mTouch)
The PIC32MX210F016D-I/PT integrates the CTMU (Charge Time Measurement Unit) which provides hardware-based capacitance measurement for the Microchip mTouch capacitive touch library. Designers can implement touch buttons, sliders, and proximity sensors without external analog front-ends, reducing BOM cost. Combined with the 40 MHz MIPS core, the MCU can debounce and process touch events in real time, while PPS remapping allows touch channels to be assigned to any of the 34 I/O pins.
Recomendado
Small Graphics Displays (PMP Parallel Master Port)
The PIC32MX210F016D-I/PT's integrated Parallel Master Port (PMP) drives small TFT and OLED graphic displays up to QVGA resolution, making it appropriate for human-machine interfaces on appliances, instruments, and consumer devices. The 16 KB Flash holds graphics fonts and bitmap assets, and the 40 MHz core refreshes the frame buffer at acceptable rates for static or low-motion UIs. PMP pins are multiplexed with general I/O, so designers must plan pin allocation early in the schematic phase.
Recomendado
Audio Codec Interfaces (I2S/SP)
The PIC32MX210F016D-I/PT provides two I2S/SPI modules that interface directly to external audio codecs for digital audio playback and capture applications such as Bluetooth speakers, intercoms, and voice prompt systems. Combined with 4 KB SRAM for audio buffers and DMA support that off-loads sample movement, the part handles 16-bit/44.1 kHz audio without CPU saturation. The MCU's low 0.5 mA/MHz active current extends battery life in portable audio designs.
Recomendado
Industrial Sensor Hubs and Data Loggers
The PIC32MX210F016D-I/PT operates across -40C to +105C industrial temperature range with 34 I/O pins available for multiple sensor interfaces (UART, I2C, SPI). Its 4-channel DMA off-loads repetitive ADC and sensor reads, freeing the MIPS M4K core to run calibration and Modbus/CANopen protocol stacks. The 16 KB Flash stores bootloaders plus application code, and the 40 MHz speed handles typical 10-100 Hz sensor sampling rates with significant headroom for filtering algorithms.
Recomendado
Battery-Powered IoT Edge Devices
The PIC32MX210F016D-I/PT's 0.5 mA/MHz active current, multiple power management modes (Sleep, Idle, Doze), and integrated peripherals make it appropriate for battery-powered IoT edge nodes. Designers leverage Sleep mode (<1 uA typical) between sensor reads, and the CTMU provides ultra-low-power touch wake-up without external components. The 2.3V-3.6V supply range aligns directly with single-cell Li-ion (3.0V-4.2V with LDO) or 2xAA alkaline battery stacks.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MX210F016D-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MX210F016D-V/PT | PIC32MX210F016D-I/ML | PIC32MX220F032D-I/PT | PIC32MX230F064D-I/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TQFP-44 (10x10 mm) | TQFP-44 (10x10 mm) - same | QFN-44 - different | TQFP-44 (10x10 mm) - same | TQFP-44 (10x10 mm) - same |
| Flash Memory | 16 KB | 16 KB | 16 KB | 32 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 8 KB | 16 KB |
| Maximum CPU Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| USB Interface | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device | USB 2.0 FS Device |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| I/O Pins | 34 | 34 | 34 | 34 | 34 |
Principais diferenciais
- Integrated USB 2.0 full-speed device with dedicated PLL (vs PIC32MX110F016D-I/PT)
- Integrated CTMU for capacitive touch sensing (vs PIC32MX230F064D-I/PT)
- PMP for small graphics displays (vs PIC32MX210F016B-I/SP (28-pin))
Notas de projeto
Decoupling the VDD, VUSB, and VBAT pins requires both a 1uF and 0.1uF ceramic capacitor placed within 3 mm of the respective pins, with traces kept short and wide. VUSB (USB transceiver supply) and VDD (core supply) are typically tied to the same 3.3V rail but require independent decoupling networks. Bulk 10uF tantalum or ceramic on the main 3.3V rail handles transient current during USB enumeration peaks (up to 100 mA in USB spec).
Route USB D+ and D- as a 90-ohm differential pair with matched length within 150 mil. Keep the pair away from switching regulators and high-frequency clocks (>20 MHz). Place the 27 ohm series damping resistors on D+/D- close to the MCU pins. Maintain continuous ground plane under the USB traces and provide a clean chassis ground connection for EMI.
PPS (Peripheral Pin Select) remapping must be configured before the corresponding peripheral module is enabled, otherwise the I/O will be in default mode. Assign pins in software initialization code in the order UART, SPI, I2C, then timers to prevent conflicts. For TQFP-44 designs, reserve pins 28-31 (VUSB/VBUS/D+/D-) exclusively for USB and do not multiplex with other functions.
At full 40 MHz operation with all peripherals active, the PIC32MX210F016D-I/PT dissipates approximately 20 mA total current (0.5 mA/MHz x 40 MHz), resulting in ~66 mW power at 3.3V. The TQFP-44 package thermal resistance theta_JA is approximately 50 C/W, yielding a 3.3C junction temperature rise above ambient - well within the 125C maximum junction limit for industrial applications.
Do not enable peripheral modules before configuring their PPS pin mappings - this causes the module to drive default pins and may conflict with other peripherals. Ensure the MCLR pin has a 10k pull-up to VDD and a 100 nF decoupling cap to ground for proper in-circuit programming. The CTMU module requires calibration via the CTMUCON register at startup before reliable touch measurements can be obtained.
Informações de conformidade
RoHS compliant per Microchip product page. Industrial temperature grade (-40C to +105C). Not AEC-Q100 qualified - automotive designs should consider PIC32MX series with explicit automotive grade designation.