PIC32MX350F128H-I/PT - 32-bit MCU 80MHz 128KB Flash 64-TQFP | Microchip
N.º da peça: PIC32MX350F128H-I/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $5.78 | $5,78 |
| 10 | $5.21 | $52,10 |
| 100 | $4.62 | $462,00 |
| 500 | $4.05 | $2.025,00 |
| 1.000 | $3.48 | $3.480,00 |
PIC32MX350F128H-I/PT Visão geral
A 32-bit microcontroller (MCU) is an embedded processor that executes instructions on a 32-bit data path, enabling higher code performance, more addressable memory, and richer peripheral integration than 8-bit or 16-bit predecessors. The PIC32 family uses the MIPS32 M4K Harvard architecture with separate instruction and data buses, sitting in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. PIC32MX3/4 series parts target cost-effective applications that demand 32-bit performance without paying for higher-tier Cortex-M cores.
Key features include 128 KB Flash program memory (with an additional 12 KB auxiliary Flash), 32 KB SRAM data memory, two I2S/SPI modules for audio codec interfaces, Peripheral Pin Select (PPS) for flexible signal routing, Parallel Master Port (PMP) for graphics displays, Charge Time Measurement Unit (CTMU) for capacitive touch sensing, and a 10-bit ADC. The I-suffix industrial temperature grade spans -40C to +85C, and operating voltage is 2.3V to 3.6V. The TQFP-64 footprint simplifies PCB layout and hand-prototyping versus QFN variants.
The MIPS32 M4K core implements a 5-stage pipeline with hardware multiply/divide, single-cycle 32-bit ALU operations, and deterministic interrupt response. Five 16-bit and two 32-bit timers provide flexible timing, and the integrated USB 2.0 full-speed device/host/OTG controller removes the need for an external PHY in many designs.
Typical applications include industrial control and HMI panels, USB peripherals, audio playback devices with I2S codecs, capacitive-touch user interfaces, and low-cost graphics terminals using small TFT displays driven by PMP. The 53 GPIO count and PPS flexibility allow pin-limited packages to expose most peripherals simultaneously.
Design consideration: use MPLAB X IDE with the XC32 compiler for code development and ICD3/REAL ICE for in-circuit debugging. Plan the ICSP PGECx/PGEDx pin pair assignment carefully because any pair is acceptable but both pins of a pair must be used together. Add bulk + bypass decoupling (10uF + 100nF) at each VDD/VSS pair to ensure stable operation across the 2.3-3.6V range.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para PIC32MX350F128H-I/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MX350F128H-I/PT (mesmo formato e footprint) — diferindo em Package, Core Architecture, ADC, Operating Temperature.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MX350F128H-V/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX350F128HT-I/PT
✅ Drop-In✓ Em estoque
$3.59 / unidade
Ver ficha técnica →PIC32MX350F128H-I/PTG
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX450F256H-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX340F128H-80I/PT
✅ Drop-In✓ Em estoque
$4.61 / unidade
Ver ficha técnica →PIC32MX330F064H-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX350F128H-I/PT Classificações máximas e características elétricas
| Core Architecture | MIPS32 M4K 32-bit RISC |
| Frequência máxima de clock | 80 MHz |
| Program Memory Size | 128 KB Flash |
| Data RAM Size | 32 KB SRAM |
| Operating Voltage Range | 2.3 V to 3.6 V |
| Faixa de temperatura de operação | -40 C to +85 C (Industrial) |
| Largura do barramento de dados | 32 bit |
| Number of I/O Pins | 53 |
| ADC | 10-bit on-chip |
| I2S/SPI Modules | 2 |
| I2C Modules | 2 |
| Timers | 5 x 16-bit and 2 x 32-bit |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| Encapsulamento | 64-TQFP (PT) 10x10 mm |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Nível MSL | 3 (168 hours) |
Configuração de pinos do PIC32MX350F128H-I/PT
| Pino 1 | RPB0 — Remappable peripheral I/O (PPS) |
| Pino 2 | RPB1 — Remappable peripheral I/O (PPS) |
| Pino 3 | RPB2 — Remappable peripheral I/O (PPS) |
| Pino 4 | RPB3 — Remappable peripheral I/O (PPS) |
| Pino 5 | VSS — Ground |
| Pino 6 | RPB4 — Remappable peripheral I/O (PPS) |
| Pino 7 | RPB5 — Remappable peripheral I/O (PPS) |
| Pino 8 | VSS — Ground |
| Pino 9 | RPB6 — Remappable peripheral I/O (PPS) / ICSP PGEC2 |
| Pino 10 | RPB7 — Remappable peripheral I/O (PPS) / ICSP PGED2 |
| Pino 11 | VDD — Power supply (2.3V to 3.6V) |
| Pino 12 | VSS — Ground |
| Pino 13 | RPB8 — Remappable peripheral I/O (PPS) |
| Pino 14 | RPB9 — Remappable peripheral I/O (PPS) |
| Pino 15 | RPB10 — Remappable peripheral I/O (PPS) |
| Pino 16 | VSS — Ground |
| Pino 17 | RPB11 — Remappable peripheral I/O (PPS) |
| Pino 18 | VDD — Power supply |
| Pino 19 | VSS — Ground |
| Pino 20 | RA0 — Port A GPIO |
| Pino 21 | RA1 — Port A GPIO |
| Pino 22 | RA2 — Port A GPIO |
| Pino 23 | RA3 — Port A GPIO |
| Pino 24 | RA4 — Port A GPIO |
| Pino 25 | RA5 — Port A GPIO |
| Pino 26 | RA6 — Port A GPIO |
| Pino 27 | RA7 — Port A GPIO |
| Pino 28 | VSS — Ground |
| Pino 29 | RA9 — Port A GPIO |
| Pino 30 | RA10 — Port A GPIO |
| Pino 31 | RA11 — Port A GPIO |
| Pino 32 | RA12 — Port A GPIO |
| Pino 33 | RA13 — Port A GPIO |
| Pino 34 | RA14 — Port A GPIO |
| Pino 35 | RA15 — Port A GPIO |
| Pino 36 | VSS — Ground |
| Pino 37 | OSC1 — Oscillator input / CLKIN |
| Pino 38 | OSC2 — Oscillator output |
| Pino 39 | VSS — Ground |
| Pino 40 | VDD — Power supply |
| Pino 41 | RPG6 — Remappable peripheral I/O (PPS) |
| Pino 42 | RPG7 — Remappable peripheral I/O (PPS) |
| Pino 43 | RPG8 — Remappable peripheral I/O (PPS) |
| Pino 44 | RPG9 — Remappable peripheral I/O (PPS) |
| Pino 45 | VDD — Power supply |
| Pino 46 | VSS — Ground |
| Pino 47 | RPC1 — Remappable peripheral I/O (PPS) |
| Pino 48 | RPC2 — Remappable peripheral I/O (PPS) |
| Pino 49 | RPC3 — Remappable peripheral I/O (PPS) |
| Pino 50 | RPC4 — Remappable peripheral I/O (PPS) |
| Pino 51 | D+ — USB D+ data line |
| Pino 52 | D- — USB D- data line |
| Pino 53 | VBUS — USB VBUS sense |
| Pino 54 | VUSB — USB internal transceiver power |
| Pino 55 | VSS — Ground |
| Pino 56 | RPC5 — Remappable peripheral I/O (PPS) |
| Pino 57 | RPC6 — Remappable peripheral I/O (PPS) |
| Pino 58 | RPC7 — Remappable peripheral I/O (PPS) |
| Pino 59 | RPC8 — Remappable peripheral I/O (PPS) |
| Pino 60 | VDD — Power supply |
| Pino 61 | MCLR — Master clear (reset) input |
| Pino 62 | RPG0 — Remappable peripheral I/O (PPS) / ICSP PGEC1 |
| Pino 63 | RPG1 — Remappable peripheral I/O (PPS) / ICSP PGED1 |
| Pino 64 | VSS — Ground |
Aplicações típicas
PIC32MX350F128H-I/PT é adequado para 7 aplicaçãos: Industrial HMI Control Panels, USB HID Peripheral Devices, Audio Playback with I2S DAC, Capacitive Touch User Interfaces, Low-Cost Graphics Terminals, IoT Sensor Edge Nodes, Motor Control and Drive Interfaces.
Industrial HMI Control Panels
The PIC32MX350F128H-I/PT fits industrial HMI panels because its MIPS32 M4K core at 80 MHz delivers the 131 DMIPS throughput required for menu rendering and real-time input handling on Parallel Master Port (PMP)-driven TFT displays. The integrated Charge Time Measurement Unit (CTMU) enables robust capacitive touch sensing without an external touch controller, reducing BOM cost. With 53 GPIO via Peripheral Pin Select, the part can drive a 4.3-inch QVGA TFT plus multiple LEDs, relays, and keypad rows simultaneously from a single chip. The industrial -40C to +85C temperature grade ensures reliable operation in factory-floor enclosures.
Recomendado
USB HID Peripheral Devices
The PIC32MX350F128H-I/PT integrates a USB 2.0 Full-Speed Device/Host/OTG controller with on-chip transceiver, eliminating the need for an external PHY in HID keyboards, mice, game controllers, and custom input devices. The 128 KB Flash comfortably holds the Microchip USB HID stack plus application firmware, while 32 KB SRAM provides buffer headroom for HID reports and command queues. The two I2S/SPI modules allow simultaneous USB operation and external peripheral expansion, and the 53 GPIO support keyboard matrices, LED arrays, and rotary encoder inputs in a single MCU.
Recomendado
Audio Playback with I2S DAC
The PIC32MX350F128H-I/PT drives external I2S DACs through its two dedicated I2S/SPI modules at sample rates up to 192 kHz, supporting high-fidelity audio playback in consumer audio devices. The MIPS32 M4K core at 80 MHz decodes MP3, AAC, or FLAC streams in real time with cycle budget remaining for display updates and user-interface state. The 128 KB Flash stores audio codec firmware and small UI assets, while 32 KB SRAM serves as decoded audio buffers. PMP enables LCD character or graphic display integration in the same MCU.
Recomendado
Capacitive Touch User Interfaces
The PIC32MX350F128H-I/PT excels in capacitive touch interfaces through its on-chip Charge Time Measurement Unit (CTMU), which measures capacitance changes with sub-pF resolution without external touch controller ICs. Combined with Peripheral Pin Select, up to 53 touch electrodes can be implemented directly from the MCU GPIO, supporting sliders, wheels, and matrix touch panels. The 80 MHz core processes touch scanning, gesture recognition, and host communication in real time. The 128 KB Flash holds touch libraries plus application firmware.
Recomendado
Low-Cost Graphics Terminals
The PIC32MX350F128H-I/PT drives small TFT displays through its Parallel Master Port (PMP) at up to 80 MHz, supporting QVGA and smaller WQVGA color panels with 8-bit or 16-bit parallel interfaces. The 53 GPIO count allows direct connection of 16-bit data bus plus control signals without external glue logic. 128 KB Flash stores font tables and small bitmap assets, while 32 KB SRAM serves as frame buffer for partial screen updates. Combined with USB device capability, this enables compact POS terminals, vending machine displays, and instrument front panels.
Recomendado
IoT Sensor Edge Nodes
The PIC32MX350F128H-I/PT serves IoT edge nodes that aggregate sensor data and forward it over USB, UART, or I2C to upstream gateways. The 10-bit ADC with multiple channels reads analog sensors directly, while two I2C ports interface to modern digital sensors and EEPROMs. 53 GPIO support multiple sensor interfaces including SPI peripherals. The 2.3V to 3.6V supply range is compatible with battery monitoring circuits, and the industrial temperature grade supports outdoor enclosure deployment.
Recomendado
Motor Control and Drive Interfaces
The PIC32MX350F128H-I/PT provides the 80 MHz MIPS32 M4K throughput and rich timer mix (five 16-bit plus two 32-bit timers) needed for motor control applications including stepper, brushed DC, and small BLDC drives. The PWM-capable timers generate complementary outputs with dead-band control, while 53 GPIO route QRS-style I/O for Hall sensors, encoders, and fault inputs. The 128 KB Flash holds field-oriented control algorithms plus application firmware, and the industrial -40C to +85C range supports motor compartment mounting.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MX350F128H-I/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MX350F128H-V/PT | PIC32MX350F128HT-I/PT | PIC32MX450F256H-I/PT | PIC32MX340F128H-80I/PT | PIC32MX330F064H-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (PT) 10x10 mm | 64-TQFP (PT) - same | 64-TQFP (PT) - same | 64-TQFP (PT) - same | 64-TQFP (PT) - same | 64-TQFP (PT) - same |
| Core | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit |
| Max Clock Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 256 KB (+100%) | 128 KB | 64 KB (-50%) |
| SRAM | 32 KB | 32 KB | 32 KB | 64 KB (+100%) | 32 KB | 16 KB (-50%) |
| Temperature Grade | Industrial -40C to +85C | Automotive -40C to +105C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C | Industrial -40C to +85C |
| USB Controller | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG | USB 2.0 FS Device/Host/OTG |
| GPIO Count | 53 | 53 | 53 | 53 | 53 | 53 |
Principais diferenciais
- Drop-in upgrade path to 256 KB Flash without PCB rework (vs PIC32MX450F256H-I/PT)
- Higher memory than lower-tier PIC32MX330 family in same package (vs PIC32MX330F064H-I/PT)
- Higher performance than predecessor PIC32MX340 family (vs PIC32MX340F128H-80I/PT)
Notas de projeto
Place a 10uF bulk tantalum or ceramic capacitor at each VDD/VSS pin pair, plus a 100nF ceramic bypass capacitor within 5mm of every VDD pin. The PIC32MX350F128H-I/PT has multiple VDD/VSS pins distributed around the 64-TQFP package; inadequate decoupling causes code execution failures and ADC measurement errors. The 2.3V to 3.6V supply range requires tight regulation - use an LDO with PSRR greater than 50 dB at 1 MHz to prevent switching noise from affecting USB operation.
Route the 80 MHz system clock traces with 50-ohm controlled impedance and keep them away from analog traces like the ADC inputs. Place the 8 MHz primary crystal or resonator within 5mm of the OSC1/OSC2 pins with short traces and a ground guard ring. For USB designs, route D+ and D- as a 90-ohm differential pair with no stubs, matching length within 150 mil. Add ESD protection diodes (USBLC6-2 or equivalent) at the USB connector.
When using the ICSP programming/debug interface, you must use any pair of PGECx/PGEDx pins as a pair - if you select PGEC2, ICSPDAT must be connected to PGED2. MCLR must have a 10kohm pull-up to VDD or programming will fail. For Peripheral Pin Select (PPS), configure the peripheral input/output mapping registers before enabling the peripheral; misconfiguration is a common source of no-operation issues. The 53 GPIO count assumes PPS remapping is configured - many pins share alternate functions at reset.
The 64-TQFP package has a theta_JA around 50 C/W in still air, which is generally adequate for the PIC32MX350F128H-I/PT's typical 30-40 mA active current at 80 MHz (around 130 mW at 3.3V). However, in enclosed industrial enclosures above 60C ambient, verify thermal margin by measuring the case temperature during worst-case operation. For higher ambient environments, choose the -V (automotive -40C to +105C) variant which shares the same 64-TQFP footprint.
Informações de conformidade
RoHS and REACH compliant per Microchip product page. Lead-free matte-tin finish on TQFP. The -I suffix indicates industrial temperature grade (-40C to +85C); the -V suffix variants in the same family are AEC-Q100 qualified for automotive applications. For automotive designs, choose PIC32MX350F128H-V/PT or higher-grade variants.
