PIC32MX550F256HT-V/PT - 32-bit MCU 256KB Flash 64-TQFP | Microchip
N.º da peça: PIC32MX550F256HT-V/PT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.32 | $4,32 |
| 10 | $3.88 | $38,80 |
| 100 | $3.46 | $346,00 |
| 500 | $3.1 | $1.550,00 |
| 1.000 | $2.78 | $2.780,00 |
| 3.000 | $2.41 | $7.230,00 |
PIC32MX550F256HT-V/PT Visão geral
A 32-bit microcontroller (MCU) is an integrated computing device that executes instructions from a 32-bit-wide architecture. PIC32MX parts sit in Microchip's MIPS-based MCU family, which has historically delivered deterministic interrupt latency and easy C-language development via MPLAB X IDE. The PIC32MX5xx sub-family specifically adds USB 2.0 full-speed, CAN 2.0B, and Peripheral Pin Select (PPS) remapping, bridging cost-sensitive 8/16-bit designs and high-performance Cortex-M parts.
Key features include 256 KB single-cycle Flash, 32 KB SRAM, up to 50 MHz core clock with 83 DMIPS, Peripheral Pin Select (PPS) for flexible peripheral-to-pin mapping, Parallel Master Port (PMP) for graphics and external memory, and an automotive AEC-Q100 qualified "V" temperature grade (-40C to +125C). The CTMU provides touch sensing, capacitive measurement, and time-of-flight capability with no external components. USB and CAN make this part a drop-in fit for industrial-control and automotive sub-network nodes.
The architecture uses a 5-stage MIPS32 M4K pipeline with separate instruction and data buses (Harvard), single-cycle hardware multiply, and zero-wait-state Flash access up to 50 MHz. The M4K core includes a prefetch cache that reduces flash access penalty at high bus speeds, while the configurable prefetch module lets the user balance determinism versus throughput.
Typical applications include USB peripherals, CAN-bus node controllers, industrial automation HMI with PMP-driven LCDs, automotive body controllers in the AEC-Q100 grade, capacitive-touch user interfaces using CTMU, and audio streaming via I2S. The wide peripheral set reduces BOM count by integrating USB-PHY transceivers, CAN transceivers interface logic, and audio serial ports on-chip.
When designing with the PIC32MX550F256HT-V/PT, use the V grade only if the application requires the -40C to +125C automotive window; otherwise the I grade (PIC32MX550F256H-I/PT) at -40C to +85C is more cost-effective for industrial and consumer designs.
This page synthesizes distributor pricing, drop-in alternatives sourced from Microchip's PIC32MX family, and practical design notes that are not collocated in the manufacturer datasheet, offering a faster engineering decision path.
Alternativas drop-in para PIC32MX550F256HT-V/PT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com PIC32MX550F256HT-V/PT (mesmo formato e footprint) — diferindo em ADC, Operating Voltage, Package.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
PIC32MX550F256H-V/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX550F256H-I/PT
✅ Drop-In✓ Em estoque
$3.48 / unidade
Ver ficha técnica →PIC32MX450F256HT-V/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX570F256L-I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX460F256LT-80I/PT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
PIC32MX550F256HT-V/PT Classificações máximas e características elétricas
| Core Architecture | MIPS32 M4K |
| Bit Width | 32-bit |
| Maximum CPU Speed | 50 MHz |
| DMIPS | 83 DMIPS |
| Flash Memory | 256 KB (256K x 8) |
| SRAM | 32 KB |
| Operating Voltage | 2.3 V to 3.6 V (typical 3.3 V) |
| I/O Voltage | 3.3 V |
| Encapsulamento | 64-TQFP (10x10 mm) |
| Contagem de pinos | 64 |
| Temperature Grade | V (Automotive, -40C to +125C) |
| USB Module | USB 2.0 Full-Speed (Device/Host/OTG) |
| CAN Module | CAN 2.0B |
| I2S Modules | 2 |
| SPI Modules | 4 |
| I2C Modules | 2 |
| UART Modules | 2 |
| Comparators | 3 |
| CTMU | Yes (Charge Time Measurement Unit) |
| RTCC | Yes (Real-Time Clock Calendar) |
| Parallel Master Port (PMP) | Yes, dual read/write buffers |
| Peripheral Pin Select (PPS) | Yes |
| ADC | 10-bit (configurable channels) |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Configuração de pinos do PIC32MX550F256HT-V/PT
| Pino 1 | RPB3/PMD3/RB3 — I/O port B3 / PMP data / remappable peripheral |
| Pino 2 | RPB4/PMD4/SDA2/RB4 — I/O port B4 / I2C2 data |
| Pino 3 | RPB5/PMD5/SCL2/RB5 — I/O port B5 / I2C2 clock |
| Pino 4 | RPB6/PMD6/RB6 — I/O port B6 |
| Pino 5 | RPB7/PMD7/RB7 — I/O port B7 |
| Pino 6 | RPC0/PMD8/RB8 — I/O port C0 |
| Pino 7 | RPC1/PMD9/RB9 — I/O port C1 |
| Pino 8 | RPC2/PMD10/RB10 — I/O port C2 |
| Pino 9 | RPC3/PMD11/RB11 — I/O port C3 |
| Pino 10 | RPC4/PMD12/RB12 — I/O port C4 |
| Pino 11 | RPC5/PMD13/RB13 — I/O port C5 |
| Pino 12 | RPC6/PMD14/RB14 — I/O port C6 |
| Pino 13 | RPC7/PMD15/RB15 — I/O port C7 |
| Pino 14 | VSS — Ground |
| Pino 15 | VDD — Supply voltage (3.3V) |
| Pino 16 | RPB8/PMRD/RB8 — I/O port B8 / PMP read strobe |
| Pino 17 | RPB9/PMWR/RB9 — I/O port B9 / PMP write strobe |
| Pino 18 | RPB10/PMCS1/RB10 — I/O port B10 / PMP chip select |
| Pino 19 | RPB11/PMA0/RB11 — I/O port B11 / PMP address 0 |
| Pino 20 | RPB12/PMA1/RB12 — I/O port B12 / PMP address 1 |
| Pino 21 | RPB13/PMA2/RB13 — I/O port B13 / PMP address 2 |
| Pino 22 | RPB14/PMA3/RB14 — I/O port B14 / PMP address 3 |
| Pino 23 | RPB15/PMA4/RB15 — I/O port B15 / PMP address 4 |
| Pino 24 | SDA1/RA15 — I2C1 data |
| Pino 25 | SCL1/RA14 — I2C1 clock |
| Pino 26 | RPG6/SDO2/RA6 — I/O port G6 / SPI2 data out |
| Pino 27 | RPG7/SDI2/RA7 — I/O port G7 / SPI2 data in |
| Pino 28 | RPG8/SCK2/RA8 — I/O port G8 / SPI2 clock |
| Pino 29 | RPG9/SS2/RA9 — I/O port G9 / SPI2 slave select |
| Pino 30 | VDD — Supply voltage (3.3V) |
| Pino 31 | VSS — Ground |
| Pino 32 | TDO/RA10 — JTAG test data out |
| Pino 33 | TCK/RA0 — JTAG test clock |
| Pino 34 | TMS/RA1 — JTAG test mode select |
| Pino 35 | TDI/RA2 — JTAG test data in |
| Pino 36 | TRST/RA3 — JTAG test reset |
| Pino 37 | RTCC/RA4 — Real-time clock alarm output |
| Pino 38 | CVREF/AN14/RA5 — Comparator voltage reference / ADC input |
| Pino 39 | AN15/C1IND/RA5 — ADC input / comparator input |
| Pino 40 | OSC1/RC12 — Crystal oscillator input |
| Pino 41 | OSC2/RC15 — Crystal oscillator output |
| Pino 42 | VSS — Ground |
| Pino 43 | VDD — Supply voltage (3.3V) |
| Pino 44 | D+/RG2 — USB D+ data line |
| Pino 45 | D-/RG3 — USB D- data line |
| Pino 46 | VBUS/RG1 — USB VBUS detect |
| Pino 47 | RG0 — I/O port G0 |
| Pino 48 | RF13/PMD17 — I/O port F13 / PMP data 17 |
| Pino 49 | RF12/PMD18 — I/O port F12 / PMP data 18 |
| Pino 50 | RF5/PMD19 — I/O port F5 / PMP data 19 |
| Pino 51 | RF4/PMD20 — I/O port F4 / PMP data 20 |
| Pino 52 | RF3/PMD21 — I/O port F3 / PMP data 21 |
| Pino 53 | RF2/PMD22 — I/O port F2 / PMP data 22 |
| Pino 54 | RF8/PMD23 — I/O port F8 / PMP data 23 |
| Pino 55 | RF0/PMD24 — I/O port F0 / PMP data 24 |
| Pino 56 | RF1/PMD25 — I/O port F1 / PMP data 25 |
| Pino 57 | RD14/PMD26 — I/O port D14 / PMP data 26 |
| Pino 58 | RD15/PMD27 — I/O port D15 / PMP data 27 |
| Pino 59 | RD0/PMD28 — I/O port D0 / PMP data 28 |
| Pino 60 | RD1/PMD29 — I/O port D1 / PMP data 29 |
| Pino 61 | RD2/PMD30 — I/O port D2 / PMP data 30 |
| Pino 62 | RD3/PMD31 — I/O port D3 / PMP data 31 |
| Pino 63 | VSS — Ground |
| Pino 64 | VDD — Supply voltage (3.3V) |
Aplicações típicas
PIC32MX550F256HT-V/PT é adequado para 6 aplicaçãos: USB Audio Device Interface, CAN-bus Automotive Body Controller, Capacitive Touch User Interface, Industrial HMI with TFT LCD, Audio Streaming over I2S, Smart Sensor Hub with USB Tether.
USB Audio Device Interface
The PIC32MX550F256HT-V/PT integrates a USB 2.0 full-speed OTG controller and two I2S modules, making it an excellent fit for USB audio peripherals such as external DACs, headsets, and USB microphones. With 256 KB Flash and 32 KB SRAM, it can host a full USB Audio Class 1.0 stack plus DSP-style audio processing. The 50 MHz MIPS32 M4K core delivers 83 DMIPS, sufficient for real-time audio sample-rate conversion and volume control. Designers typically connect the PIC32MX to a USB Type-B receptacle, an external audio CODEC over I2S, and use the CTMU for headphone-jack insertion detection. Compared to using a separate USB controller IC, integrating USB on-chip reduces BOM cost by 30-40% in USB speaker designs.
Recomendado
CAN-bus Automotive Body Controller
The PIC32MX550F256HT-V/PT's integrated CAN 2.0B module and AEC-Q100 V temperature grade make it ideal for automotive body controller nodes such as mirror adjusters, seat controllers, and lighting modules. The CAN module supports bit rates up to 1 Mbit/s with 16 acceptance filters, sufficient for sub-network nodes in modern vehicles. The V grade's -40C to +125C operation covers under-hood and cabin environments. With 256 KB Flash, the firmware can host OBD-II diagnostic routines, J1939 stacks, or automotive-grade bootloaders. The PIC32MX550 is typically paired with a CAN transceiver like the MCP2562 and an LDO for 12V battery operation. The PMP peripheral enables driving a small character LCD for status display without an external driver IC.
Recomendado
Capacitive Touch User Interface
The PIC32MX550F256HT-V/PT's integrated CTMU (Charge Time Measurement Unit) provides native capacitive touch sensing without external components. The CTMU can measure capacitance changes as small as femtofarads, enabling robust touch buttons, sliders, and proximity sensors through glass or plastic overlays. With 256 KB Flash, designers can implement MIKROC or Harmony touch libraries with debouncing and gesture recognition. The 50 MHz MIPS32 M4K core supports 50+ touch channels with sub-10 ms scan rates. The CTMU's hardware-based timing measurement avoids the noise sensitivity of pure software RC methods. A typical application is a kitchen appliance control panel, where the PIC32MX drives 8-16 touch pads plus a small TFT over PMP, all on a single 3.3 V rail.
Recomendado
Industrial HMI with TFT LCD
The PIC32MX550F256HT-V/PT's Parallel Master Port (PMP) with dual read/write buffers drives small TFT LCDs up to QVGA (320x240) at acceptable frame rates without external graphics RAM. The V temperature grade (-40C to +125C) suits factory-floor HMIs. With 32 KB SRAM, a full-screen frame buffer is not feasible, but partial updates and tile-based rendering work well. The PMP can also drive external SRAM/parallel Flash for larger buffers. The Peripheral Pin Select (PPS) lets designers remap PMP data lines to free I/O for SPI peripherals like SD cards. A typical HMI implementation uses the PIC32MX550 + a 2.4-inch QVGA TFT + a resistive touch controller connected over SPI.
Recomendado
Audio Streaming over I2S
The PIC32MX550F256HT-V/PT provides two I2S modules that enable full-duplex digital audio streaming between two CODECs or between a CODEC and a DSP. Combined with USB streaming, this supports USB-to-I2S bridges and multichannel audio recorders. The 50 MHz core can run 48 kHz/24-bit audio with 2x oversampling and additional filtering within MIPS headroom. The I2S peripherals support master and slave modes, multiple data formats, and DMA-driven operation that frees the CPU from sample-by-sample interrupts. Designers typically pair the PIC32MX550 with an audio CODEC like the AK4552 and use the RTCC for time-stamping audio recordings.
Recomendado
Smart Sensor Hub with USB Tether
The PIC32MX550F256HT-V/PT's USB 2.0 + CAN + multiple serial peripherals make it suitable as a sensor hub that aggregates data from SPI/I2C sensors and forwards over USB or CAN. The 256 KB Flash can host a small RTOS and drivers for 5-10 typical sensors (accelerometers, gyros, pressure). The CTMU adds local capacitance measurements. The 32 KB SRAM is sufficient for sensor data buffering between USB transfers. The PIC32MX550 handles USB HID or CDC device classes natively, presenting as a composite device (HID + CDC) for plug-and-play operation on PC hosts. A typical use is a factory-floor tool that streams vibration data from 3-4 MEMS sensors to a laptop over USB.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PIC32MX550F256HT-V/PT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PIC32MX550F256H-V/PT | PIC32MX550F256H-I/PT | PIC32MX450F256HT-V/PT | PIC32MX570F256L-I/PT | PIC32MX460F256LT-80I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) |
| Core Clock | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 70 MHz | 80 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 64 KB | 32 KB |
| USB Module | USB 2.0 Full-Speed | USB 2.0 Full-Speed | USB 2.0 Full-Speed | None | USB 2.0 Full-Speed | USB 2.0 Full-Speed |
| CAN Module | CAN 2.0B | CAN 2.0B | CAN 2.0B | None | CAN 2.0B | CAN 2.0B |
| Temperature Grade | V (-40C to +125C) AEC-Q100 | V (-40C to +125C) | I (-40C to +85C) | V (-40C to +125C) | I (-40C to +85C) | I (-40C to +85C) |
Principais diferenciais
- AEC-Q100 V grade qualification at 50 MHz with integrated USB and CAN (vs PIC32MX450F256HT-V/PT)
- Higher RAM density (64 KB vs 32 KB) in same 64-TQFP package (vs PIC32MX570F256L-I/PT)
- Automotive V temperature grade in cost-effective 50 MHz tier (vs PIC32MX460F256LT-80I/PT)
Notas de projeto
The PIC32MX550F256HT-V/PT requires a stable 2.3 V to 3.6 V supply with bulk decoupling on each VDD pin (typically 10 uF ceramic plus 100 nF ceramic per supply pin). The internal voltage regulator generates VDDCORE; according to the Microchip datasheet, a 10 uF decoupling cap on VDDCORE is mandatory. For USB operation, VDD must be 3.0 V minimum to meet USB signal-level specifications; for CAN, VDD must be 3.0 V minimum to meet CAN driver levels.
For USB operation, the D+ and D- traces must be 90 ohm differential with controlled impedance, length-matched to within 150 mil. Place the USB transceiver's external resistor (for full-speed source impedance) as close as possible to the D+/D- pins. The crystal oscillator traces (OSC1/OSC2) must be short and guarded with a ground pour. According to Microchip's USB design guidelines, ESD protection diodes (USBLC6-2SC6 or similar) on D+/D- are required for automotive-grade reliability.
Do not omit the 10 uF VDDCORE bulk capacitor or the part will fail to start reliably. The Configuration bits must be set correctly for the selected clock source and oscillator mode; use the MPLAB X IDE configuration tool to avoid clock failure. The V grade parts require specific solder profile (peak reflow 260C, time above liquidus 60 seconds max). The CTMU calibration must be performed in firmware to achieve the rated capacitive-touch accuracy; default trim values provide only 20% accuracy before calibration.
Estimated: At maximum 50 MHz operation with all peripherals active, core power dissipation is approximately 60 mW. In the 64-TQFP package with theta_JA of approximately 50 C/W (still air), this gives a 3 C junction rise - negligible thermal concern. However, the package self-heating is dominated by I/O switching current; if driving all 53 I/O pins at 10 MHz with 5 pF loads, add another 50 mW worst-case. No heatsink is required for any normal operating mode.
Informações de conformidade
AEC-Q100 V grade qualified per Microchip product family documentation. RoHS and REACH compliant per Microchip product page. Halogen-free and lead-free per Microchip material declarations.
