Renesas Electronics

R5F109LBJFB#V0 - 16-Bit RL78/F12 Microcontroller | Renesas

N.º da peça: R5F109LBJFB#V0 ✓ Ativo
LFQFP surface-mount package Package
MOQ: 1 |

R5F109LBJFB#V0 Visão geral

Renesas Electronics R5F109LBJFB#V0 is a 16-bit RL78/F12-series microcontroller designed for embedded automotive and industrial control systems, supplied in an LFQFP surface-mount package. It belongs to the RL78 low-power microcontroller family and provides flash memory, RAM, analog conversion, communications, and functional-safety resources for compact control nodes.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output interfaces on one integrated circuit. The RL78/F12 family is positioned within the 8-bit and 16-bit embedded-controller market for automotive systems, consumer equipment, and industrial products. Its low-power design is especially useful in battery-operated equipment, sensors, body-control modules, and compact instrument clusters where energy efficiency and deterministic peripheral operation are important.

The R5F109LBJFB#V0 combines a 16-bit processor core with a low-power architecture, on-chip flash program memory, data RAM, general-purpose I/O, analog-to-digital conversion, and automotive-oriented communications. The RL78/F12 family also includes an LIN interface and functional-safety mechanisms such as flash-memory CRC calculation, illegal-memory-access detection, RAM guarding, A/D-converter testing, and peripheral register protection. These features support robust control-loop design, firmware diagnostics, and fault detection.

The device is offered in an LFQFP package intended for automated surface-mount assembly. Its combination of communication, analog measurement, and safety-oriented peripherals makes it applicable to automotive body electronics, LIN-connected nodes, sensing modules, and industrial controllers. Exact flash capacity, RAM capacity, operating voltage, clock rate, conversion performance, temperature range, and pin assignment must be confirmed against the order-specific manufacturer documentation before schematic capture or firmware configuration.

R5F109LBJFB#V0 is appropriate when a design requires an automotive-oriented RL78/F12 control platform rather than a high-performance application processor. Its integrated LIN capability can reduce the number of discrete interface components in a low-speed vehicle network, while the safety functions help designers establish diagnostic coverage around flash, RAM, ADC, and peripheral access. The LFQFP footprint also supports conventional reflow assembly and thermal via arrangements under the package.

The principal design consideration is not generic performance but exact order-code equivalence. Renesas uses family-level device descriptions alongside numerous packing, grade, and ordering suffixes. Before replacing an installed component or releasing a PCB for production, verify the complete ordering code, package drawing, pin list, electrical limits, flash configuration, and functional-safety documentation. Use the Request a Quote form on this page for current commercial availability, lot traceability, and lead-time confirmation.

This page combines manufacturer-family information with practical sourcing guidance, qualified drop-in alternatives, package considerations, and an explicit separation between confirmed R5F109LBJFB#V0 facts and order-specific data that still requires engineering verification.

Alternativas drop-in para R5F109LBJFB#V0 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

R5F109LBJFB#V0 Classificações máximas e características elétricas

Manufacturer Renesas Electronics
Product Family RL78/F12
Processor Core 16-bit
Device Type Flash-memory microcontroller
Target Application Automotive and industrial embedded control
Encapsulamento LFQFP surface-mount package
Automotive Communication Interface LIN module within the RL78/F12 family
Functional-Safety Feature Flash-memory CRC calculation
Functional-Safety Feature Illegal-memory-access detection
Functional-Safety Feature RAM guard
Functional-Safety Feature A/D-converter testing
Functional-Safety Feature Special-function-register protection
Tipo de montagem Surface mount

Guia de Configuração de Pinos do R5F109LBJFB#V0 lfqfp surface-mount package

Configuração de pinos para R5F109LBJFB#V0 (pacote lfqfp surface-mount package). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote lfqfp surface-mount package para R5F109LBJFB#V0

Nenhum dado detalhado de pinagem disponível para R5F109LBJFB#V0.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

R5F109LBJFB#V0 é adequado para 6 aplicaçãos: Automotive Body-Control Module, LIN-Connected Vehicle Sensor Node, Industrial Condition Monitoring, Battery-Powered Environmental Sensor, Small Motor and Actuator Controller, Compact Automotive Interface Module.

🚗

Automotive Body-Control Module

The R5F109LBJFB#V0 fits compact body-control modules that coordinate switches, lamps, actuators, and diagnostic functions around a low-power vehicle network. Its 16-bit RL78/F12 architecture supports deterministic embedded control, while the family-integrated LIN module can reduce the need for separate serial-interface circuitry. The safety-related flash CRC calculation, illegal-memory-access detection, RAM guard, and ADC testing can contribute to a diagnostic strategy around critical control and measurement functions. Exact voltage, memory, and temperature requirements must be verified against the order-specific datasheet before the module enters production.

🧩

LIN-Connected Vehicle Sensor Node

The R5F109LBJFB#V0 is suitable for a LIN-connected sensor node that digitizes an analog condition and reports it over a low-speed vehicle network. The RL78/F12 family's built-in LIN module provides the serial-control foundation, while ADC testing adds a diagnostic function relevant to sensor supervision. Place the MCU, LIN transceiver, and protection components according to the manufacturer interface guidance to limit bus and EMI coupling. Confirm the exact ADC resolution, channel count, input voltage range, and peripheral mapping for the selected order code before final sensor conditioning and firmware development.

🏭

Industrial Condition Monitoring

The R5F109LBJFB#V0 can serve in a compact industrial condition-monitoring controller that samples analog sensor signals, applies local control logic, and communicates status to a network. Its low-consumption RL78/F12 positioning is useful for dispersed equipment nodes, and the integrated analog conversion and safety-diagnostic functions reduce the need for separate supervisory components. Use low-leakage input conditioning, proper reference design, and careful grounding to preserve measurement quality. Confirm whether the exact suffix meets the installation's temperature, ESD, lifecycle, and industrial qualification requirements before deployment.

🔋

Battery-Powered Environmental Sensor

The R5F109LBJFB#V0 fits battery-powered environmental sensors where a compact MCU must control intermittent measurements, apply filtering, and manage communications without excessive standby demand. The RL78/F12 family's low-consumption positioning supports duty-cycled sensing, while ADC testing and memory-protection functions strengthen fault detection. The designer should still optimize the complete sleep path, peripheral clocking, sensor standby current, and regulator quiescent current because the MCU alone does not determine battery life. Validate the exact device's low-power modes and external wake-up sources in the manufacturer documentation.

⚙️

Small Motor and Actuator Controller

The R5F109LBJFB#V0 can coordinate a small motor, solenoid, or actuator in an automotive or industrial subsystem where deterministic control and low standby consumption are more important than application-processor performance. Its general-purpose digital I/O and analog measurement resources support feedback supervision, while the family safety mechanisms assist diagnostics around flash, RAM, and ADC behavior. External power transistors, flyback protection, current sensing, and interface isolation remain part of the actuator design. Pin-muxing and timing should be established from the exact device documentation rather than assumed from other RL78 devices.

🚙

Compact Automotive Interface Module

The R5F109LBJFB#V0 is appropriate for a compact interface module that translates vehicle-network information into digital commands for lamps, sensors, or small actuators. The RL78/F12 family's LIN interface and low-power orientation support a cost-conscious architecture, while RAM guarding and illegal-memory-access detection can improve robustness after faults or unintended writes. A production design should include reverse-battery and transient protection, a properly designed LIN transceiver path, and firmware checks around communication timeouts. Confirm all automotive qualification and temperature requirements for the exact ordering suffix before release.

Resumo dos produtos recomendados

R5F109LBJFB#X0 Same R5F109LBJFB ordering family with a different suffix Usado em: Automotive Body-Control Module, Battery-Powered Environmental Sensor R5F109LBJFB#H0G RL78/F12 automotive-family ordering variant Usado em: Automotive Body-Control Module, Industrial Condition Monitoring, Battery-Powered Environmental Sensor, Compact Automotive Interface Module R5F109LBJFB#X0G RL78/F12 ordering-family candidate for pin and suffix evaluation Usado em: LIN-Connected Vehicle Sensor Node, Small Motor and Actuator Controller, Compact Automotive Interface Module R5F109LBJFB#H0 RL78/F12 ordering-family candidate for grade comparison Usado em: LIN-Connected Vehicle Sensor Node, Small Motor and Actuator Controller R5F109LEJFB#X0 RL78/F12 ordering variant for footprint and feature evaluation Usado em: Industrial Condition Monitoring
What is the Renesas Electronics R5F109LBJFB#V0?
The Renesas Electronics R5F109LBJFB#V0 is a 16-bit RL78/F12-series flash-memory microcontroller for embedded automotive and industrial control. It is packaged in an LFQFP and integrates a processor core, program and data memory, general-purpose I/O, analog conversion, communications, and safety-oriented peripherals. Renesas describes the RL78/F12 family as a low-consumption platform with 20- to 64-pin versions, 8- to 64-KB flash options, a LIN interface, and functional-safety features including flash CRC calculation, illegal-memory-access detection, RAM guarding, and ADC testing.
Where can I download the R5F109LBJFB#V0 datasheet and pinout?
The R5F109LBJFB#V0 datasheet and order-specific pin information should be obtained from the Renesas RL78/F12 product documentation and the linked part-details page. Use the pin-description table in the manufacturer documentation before assigning PCB tracks because the visible data identifies the device as an LFQFP microcontroller but does not enumerate every terminal. The package drawing, terminal names, and dimensions should also be checked against the exact ordering suffix before the footprint is released for manufacturing.
How much memory does the R5F109LBJFB#V0 contain?
The exact flash and RAM capacities for R5F109LBJFB#V0 require confirmation from the order-specific Renesas documentation. The RL78/F12 family spans devices with 8 KB to 64 KB of flash memory, but that family-wide range does not establish the capacity of this particular ordering code. Confirm the program-memory size, RAM size, option settings, and programming implications in the device datasheet before sizing firmware, linker output, or field-update routines.
What is the operating voltage of R5F109LBJFB#V0?
The exact operating-voltage limits for R5F109LBJFB#V0 are not stated on the accessible Renesas family page and must be taken from the order-specific datasheet. Designers should verify both the device's allowed input range and the voltage tolerances of every connected peripheral. This check is especially important in automotive systems because transient protection, battery variation, and regulator headroom can exceed the steady-state conditions assumed during ordinary laboratory testing.
Is R5F109LBJFB#V0 suitable for automotive control systems?
The R5F109LBJFB#V0 is suitable for automotive-oriented embedded control when the exact suffix qualification, temperature grade, and production requirements satisfy the vehicle program. The RL78/F12 family includes a LIN interface and functional-safety mechanisms for flash CRC calculation, illegal-memory-access detection, RAM guarding, and ADC testing. Those family features support robust diagnostic design, but AEC-Q100 grade and order-code traceability must be confirmed specifically for R5F109LBJFB#V0 rather than inferred from the family name.
Can R5F109LBJFB#V0 be used in a LIN-connected automotive module?
Yes, the RL78/F12 family provides a built-in LIN module, making R5F109LBJFB#V0 applicable to LIN-connected vehicle nodes. The integrated interface can simplify the hardware needed for low-speed serial communication while the MCU handles control logic and diagnostics. The final LIN transceiver, bus termination, protection network, and wake-up behavior remain external design decisions. Confirm electrical limits, pin multiplexing, and software-driver support for the exact device before finalizing the schematic.
R5F109LBJFB#V0 vs R5F109LBJFB#X0: which ordering code should I use?
The R5F109LBJFB#V0 and R5F109LBJFB#X0 are distinct Renesas ordering codes, and the suffix difference should be resolved from the manufacturer's orderable-part documentation before they are treated as interchangeable. Both appear in distributor records as RL78/F12 microcontroller variants, but the accessible product page does not state the electrical or grade differences encoded by these suffixes. For an existing design, compare the complete datasheet ordering table, package drawing, temperature grade, and qualification status; do not substitute solely because the base family number matches.
What is the best drop-in replacement for R5F109LBJFB#V0?
The best drop-in replacement for R5F109LBJFB#V0 is the Renesas ordering code that matches its complete suffix, package, memory configuration, temperature grade, qualification level, and terminal function. Candidate R5F109LBJFB-family variants were located, but their suffix-specific differences and pin compatibility were not established sufficiently to recommend them as drop-ins. Use Renesas cross-reference or ordering documentation and compare every terminal and electrical limit. This avoids treating a related family member as a safe production substitute.
What can replace R5F109LBJFB#V0 without redesigning the PCB?
A PCB-compatible replacement must use the same LFQFP footprint, preserve terminal assignments, and meet the original memory, voltage, clock, peripheral, temperature, and automotive-qualification requirements. No cross-manufacturer part can be recommended as a drop-in without verified pin and parameter cross-reference data. For this MCU, the safest replacement path is to request the exact Renesas ordering-code matrix and then compare the candidate against the original datasheet, including peripheral multiplexing and software-device identifiers.
When should I choose R5F109LBJFB#V0 over a higher-performance microcontroller?
Choose R5F109LBJFB#V0 when the design primarily requires low-power embedded control, an automotive communication interface, analog measurement, and deterministic peripheral support rather than high CPU throughput or a large memory map. The 16-bit RL78/F12 architecture is suited to body electronics, sensing modules, and compact vehicle nodes. Choose a higher-performance MCU when the application requires substantially greater processing capacity, larger RAM, complex graphics, high-speed connectivity, or an established software ecosystem beyond what the RL78/F12 provides.
Is R5F109LBJFB#V0 suitable for industrial sensors and controllers?
The R5F109LBJFB#V0 can suit compact industrial sensing and control designs that benefit from its 16-bit RL78/F12 architecture, low-consumption positioning, analog conversion, and digital communications. Industrial qualification should be checked against the exact suffix because the accessible family description emphasizes automotive use and does not state a definitive industrial temperature or compliance classification. Confirm operating temperature, ESD capability, long-term availability, and any functional-safety diagnostic requirements before using it in a deployed control product.
How do I design the power and decoupling network for R5F109LBJFB#V0?
Design the supply network around the voltage range and current limits in the exact R5F109LBJFB#V0 datasheet, then place the required bulk and high-frequency decoupling capacitors close to the device supply pins. Use the shortest practical return path from each capacitor to the corresponding ground reference and keep switching-regulator traces and inductors away from sensitive analog inputs. Because the exact pin list and internal supply requirements are order-specific, use the manufacturer reference schematic and layout guidance rather than generic capacitor values.
Does R5F109LBJFB#V0 require a LIN transceiver for automotive communication?
The R5F109LBJFB#V0's RL78/F12 family integrates a LIN module, but an MCU LIN module is not the same as a complete physical-layer LIN transceiver. The external transceiver, bus protection, connector interface, and termination network must be added unless the target module already integrates them. Use the manufacturer interface circuitry as the reference, and verify the selected transceiver's supply, timing, and fault behavior against the MCU's LIN specifications for the exact ordering code.
Where can I buy R5F109LBJFB#V0 and what is its lead time?
Use the Request a Quote form on this page to request current R5F109LBJFB#V0 availability, unit pricing, minimum order quantity, lot traceability, and lead time. The accessible distributor records confirm that the part is cataloged, but they do not provide a reliable current quantity-break table or guaranteed inventory position. For production planning, request the exact suffix and package configuration, along with date codes and any required automotive qualification documentation.
What is the price of R5F109LBJFB#V0?
Current R5F109LBJFB#V0 pricing should be requested through the Request a Quote form on this page because market conditions, order quantity, date code, and traceable supply status can change the commercial outcome. No current quantity-break price is published on the accessible manufacturer page. Include your required quantity, packaging preference, target shipment date, and acceptable date-code range when requesting a quotation so the response reflects the configuration you intend to build.
Is R5F109LBJFB#V0 in stock?
Stock status for R5F109LBJFB#V0 should be confirmed through the Request a Quote form on this page. A distributor listing indicates that the device is commercially cataloged, but it does not establish a guaranteed stock quantity or allocation for a production order. For automotive and industrial builds, request traceable stock, date codes, moisture-level information, and a manufacturing schedule in addition to the headline inventory count.
What are the key specifications of R5F109LBJFB#V0 that engineers should know?
The key confirmed characteristics are a 16-bit processor core, RL78/F12 family membership, flash-memory architecture, LFQFP surface-mount packaging, and a role in automotive and industrial embedded control. The family also provides a LIN module and safety functions covering flash CRC, illegal-memory access, RAM guarding, ADC testing, and peripheral-register protection. Exact flash, RAM, clock, voltage, I/O count, temperature range, and qualification grade remain order-specific and should be read from the R5F109LBJFB#V0 documentation before schematic or firmware release.
Which Renesas equivalent should replace R5F109LBJFB#V0 after a redesign?
For an exact replacement, use the Renesas ordering code whose complete suffix matches R5F109LBJFB#V0's memory configuration, package, temperature class, qualification, and terminal functions. Related R5F109LBJFB and R5F109LEJFB variants were identified, but they are not necessarily equivalent because the order codes can encode different grades or options. Renesas cross-reference and product documentation should be used to identify the proper ordering code, followed by a pin-by-pin and firmware-device-ID comparison before substitution is approved.

Dados de referência de engenharia para R5F109LBJFB#V0 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose R5F109LBJFB#V0 when the design needs a compact 16-bit RL78/F12 control platform with automotive-oriented LIN communication, analog measurement, and embedded memory diagnostics. It is well suited to body-control modules, sensor nodes, compact vehicle interfaces, and low-power industrial monitoring equipment. Select a related R5F109 ordering code only after its exact suffix has been checked for memory, temperature, qualification, and electrical equivalence. Do not choose a cross-manufacturer MCU solely because it uses a similar package; software timing, peripheral multiplexing, memory architecture, qualification, and ecosystem compatibility can prevent a drop-in replacement. If the design requires substantially more CPU performance, larger memory, high-speed networking, or a different automotive communications architecture, move beyond the RL78/F12 rather than forcing this device beyond its intended application class.

Comparação com alternativas

Parâmetro Este produto
Brand Renesas Electronics
Package LFQFP
Processor Core 16-bit
Product Family RL78/F12
Automotive Interface LIN module within the RL78/F12 family
Functional-Safety Features Flash CRC calculation, illegal-memory-access detection, RAM guard, ADC testing, and SFR protection
Target Applications Automotive and industrial embedded control

Principais diferenciais

  • Integrated automotive communication capability (vs R5F109LBJFB#X0)
  • Functional-safety diagnostics within the RL78/F12 family (vs R5F109LEJFB#X0)
  • Low-power 16-bit embedded-control positioning (vs R5F109LBJFB#H0G)

Notas de projeto

Use the LFQFP land pattern and terminal numbering from the exact R5F109LBJFB#V0 package drawing. Place the device's decoupling capacitors at the associated supply terminals, provide a low-impedance ground reference, and route sensitive analog inputs away from switching nodes. Because no verified terminal list is available for this ordering code, release the PCB only after cross-checking every land, exposed thermal feature, and pin-1 orientation against the order-specific mechanical drawing.

Size the regulator and protection network around the exact device voltage range, maximum operating frequency, and peripheral current. Include local bulk capacitance, high-frequency decoupling, and any required external reset or clock components exactly as shown in the manufacturer reference circuit. For an automotive installation, include reverse-battery and load-dump protection and verify the regulator's behavior during startup, shutdown, and brownout conditions rather than relying only on steady-state supply voltage.

Do not treat related R5F109LBJFB and R5F109LEJFB order codes as interchangeable based on the family name alone. Compare memory configuration, temperature grade, qualification, package dimensions, pin multiplexing, and device identifier with the exact manufacturer ordering table. Also verify that the firmware's peripheral drivers and startup vector settings match the selected device, because an otherwise pin-compatible package can still represent a different ordering option.

Keep the MCU's supply return path continuous beneath or beside the device where the package drawing permits, and use multiple thermal vias with the recommended land pattern when the LFQFP heat dissipation is significant. Keep the LIN transceiver and protection components close to the connector while maintaining separation from sensitive ADC traces. Follow the manufacturer reference layout for oscillator and analog grounding, and inspect the assembled board for solder bridges across the fine-pitch terminals.

Treat ADC inputs and communications interfaces according to their maximum source impedance and bandwidth rather than routing them as ordinary digital nets. Provide appropriate series resistance where recommended, keep switching-regulator and LIN transient paths away from analog inputs, and validate filtering against the intended signal bandwidth. Firmware should also exercise the available ADC-test and memory-protection mechanisms during startup and periodic diagnostics.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The accessible manufacturer family page identifies automotive functionality and functional-safety resources but does not provide order-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for R5F109LBJFB#V0.

Buscas relacionadas

R5F109LBJFB#V0 datasheet R5F109LBJFB#V0 pinout R5F109LBJFB#V0 datasheet pdf R5F109LBJFB#V0 equivalent R5F109LBJFB#V0 replacement R5F109LBJFB#V0 cross reference R5F109LBJFB#V0 footprint R5F109LBJFB#V0 LFQFP pinout R5F109LBJFB#V0 price R5F109LBJFB#V0 stock Renesas R5F109LBJFB#V0 R5F109LBJFB#V0 vs R5F109LBJFB#X0 R5F109LBJFB#V0 automotive microcontroller R5F109LBJFB#V0 LIN interface R5F109LBJFB#V0 16-bit microcontroller

Componentes & termos relacionados

Renesas Electronics R5F109LBJFB#V0 R5F109LBJFB#X0 R5F109LBJFB#H0G R5F109LBJFB#X0G R5F109LBJFB#H0 R5F109LEJFB#X0 RL78/F12 RL78 16-bit microcontroller flash-memory microcontroller embedded controller semiconductor LFQFP LQFP package family surface mount SMD LIN interface automotive embedded control industrial condition monitoring A/D converter flash-memory CRC calculation illegal-memory-access detection RAM guard functional safety
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ