R5F10BGGKFB#X5 - 24MHz 128KB Automotive MCU | Renesas
N.º da peça: R5F10BGGKFB#X5 ✓ AtivoR5F10BGGKFB#X5 Visão geral
An automotive microcontroller is a semiconductor integrated circuit that executes embedded control software and coordinates sensors, actuators, communication links, and safety functions. Within the product hierarchy, the R5F10BGGKFB#X5 belongs to the RL78/F13 family of flash-based microcontrollers, which succeeded the 78K0R and R8C families. Its low-power-oriented architecture is intended for systems requiring compact code execution, low standby consumption, and dedicated automotive communications.
The RL78/F13 family provides 128 KB flash memory, 8 KB RAM, and a maximum 24 MHz operating frequency in this configuration. Integrated communication resources include CAN, LIN, I2C, SPI, UART, and USART. The manufacturer also identifies RAM ECC, PLL lock detection, port-output-state monitoring, watchdog operation, low-voltage detection, and power-on reset as functional-safety and system-resilience features relevant to automotive electronics.
The R5F10BGGKFB#X5 combines a 16-bit RL78 core with CMOS automotive peripherals in a 48-pin LQFP package. Its communication mix allows one controller to manage a CAN-connected subsystem, a LIN-connected sensor or actuator network, and slower board-level serial devices. The 24 MHz clock rate provides higher processing bandwidth than low-rate automotive body controllers while retaining the low-power characteristics associated with the RL78 family.
Typical applications include vehicle body control modules, door and lock controllers, climate-control panel electronics, seat and lighting controllers, sensor-hub designs, CAN gateways, and LIN actuator nodes. Its 128 KB flash capacity supports substantially more application code than the smallest RL78/F13 devices, while 8 KB RAM permits buffering communications data and maintaining real-time control state.
Designers should confirm the exact pin multiplexing, peripheral availability, clock configuration, and automotive temperature grade against the manufacturer datasheet before schematic capture. The 48-pin LQFP land pattern requires adequate solder-mask-defined pad geometry and thermal-via planning. Firmware should also use the available watchdog, RAM ECC, reset, and PLL-lock mechanisms to detect abnormal internal or clock conditions.
This product record combines the exact manufacturer and distributor identifiers with practical interface-selection guidance, automotive application analysis, verified package information, and explicitly scoped drop-in alternatives. It also separates confirmed electrical facts from parameters that require datasheet confirmation, helping engineers evaluate the R5F10BGGKFB#X5 without relying on unsupported assumptions.
Alternativas drop-in para R5F10BGGKFB#X5 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
R5F10BGFKFB#X5
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
R5F10BGGKFB#V5
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
R5F10BGGKFB#Y5
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
R5F10BGGKFB#X5 Classificações máximas e características elétricas
| Product Type | 16-bit Flash Microcontroller |
| Microcontroller Family | RL78/F13 |
| CPU Core | RL78 16-bit CISC core |
| Maximum Operating Frequency | 24 MHz |
| Flash Program Memory | 128 KB |
| RAM | 8 KB |
| Tensão de alimentação | 3.3 V or 5 V |
| Número de pinos | 48 pins |
| Encapsulamento | 48-pin LQFP (PG-FP5) |
| CAN Interface | 1 integrated CAN module |
| LIN Interface | 1 integrated LIN module |
| Serial Interfaces | I2C, SPI, UART, and USART |
| Oscillator | Internal oscillator |
| Watchdog Timer | Yes |
| Low-Voltage Detection | Yes (LVD) |
| Power-On Reset | Yes (POR) |
| RAM ECC | Supported by RL78/F13 family |
| PLL Lock Function | Supported by RL78/F13 family |
| Port Output State Monitoring | Supported by RL78/F13 family |
| PWM Peripheral | Yes |
| Process Technology | CMOS |
Guia de Configuração de Pinos do R5F10BGGKFB#X5 48-pin lqfp (pg-fp5)
Configuração de pinos para R5F10BGGKFB#X5 (pacote 48-pin lqfp (pg-fp5)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para R5F10BGGKFB#X5.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
R5F10BGGKFB#X5 é adequado para 6 aplicaçãos: Automotive Body Control Module, CAN Gateway and Sensor Hub, LIN Actuator Node, Climate and HMI Controller, Vehicle Sensor Interface, Electric Motor and Pump Control.
Automotive Body Control Module
The R5F10BGGKFB#X5 fits an automotive body controller that coordinates switches, lamps, locks, and other body-system functions while monitoring vehicle-network activity. Its 24 MHz RL78 core provides real-time control bandwidth, while 128 KB flash accommodates application logic, diagnostics, and communication tables. The integrated CAN and LIN modules reduce external interface requirements, and 8 KB RAM supports message buffering and state management. Use the watchdog, RAM ECC, reset functions, and port-output-state monitoring to improve fault detection. The final schematic and firmware must validate every assigned CAN, LIN, timer, and I/O function against the 48-pin package data.
Recomendado
CAN Gateway and Sensor Hub
The R5F10BGGKFB#X5 is appropriate for a gateway or sensor hub that translates between CAN, LIN, and board-level serial devices. Its 24 MHz processing rate supports protocol handling alongside vehicle diagnostics, while 128 KB flash provides space for communication tables and application firmware. CAN and LIN are explicitly integrated, and I2C, SPI, UART, and USART allow local sensors, memories, or actuators to share the controller. The 8 KB RAM helps buffer active frames, but system designers should calculate peak message occupancy and scheduling latency. Confirm transceiver levels, termination, bus timing, and unused-pin states in the manufacturer documentation.
Recomendado
LIN Actuator Node
The R5F10BGGKFB#X5 can serve as the local controller for a LIN-connected door, seat, climate, or lighting actuator. The integrated LIN module reduces the communication burden, and the RL78 core's 24 MHz operating frequency supports responsive control and diagnostic routines. Its 128 KB flash capacity leaves room for application code and calibration data, while 8 KB RAM supports command queues and debounce state. PWM availability permits output-control designs where the selected timer channel and pin mapping are suitable. Validate the LIN transceiver, wake-up behavior, fault handling, and timing against the automotive operating conditions required by the vehicle program.
Recomendado
Climate and HMI Controller
The R5F10BGGKFB#X5 is suitable for a climate-control panel, switch bank, or compact human-machine interface controller. It can manage button inputs, indicators, actuators, and external communication through its combination of I2C, SPI, UART, USART, CAN, and LIN. The 24 MHz core provides useful responsiveness for display updates and debounce processing, while 128 KB flash can store interface behavior, diagnostic routines, and product variants. Eight kilobytes of RAM can retain state between display refreshes. Designers should use the device's port-output-state monitoring and watchdog features where output stability is safety-relevant, and confirm pin multiplexing before assigning mixed communication functions.
Recomendado
Vehicle Sensor Interface
The R5F10BGGKFB#X5 is a practical controller for consolidating several low-power sensors behind a vehicle communication network. I2C and SPI provide direct connections to compatible sensors and memories, UART and USART support other serial devices, and CAN or LIN carries aggregated data to a higher-level controller. The 128 KB flash capacity accommodates drivers and filtering logic, while the 8 KB RAM allows temporary sample buffering. The internal oscillator and PLL lock function require careful startup and clock-loss handling, and RAM ECC adds useful protection for critical state. Confirm sensor voltage levels, timing margins, and isolation requirements at the board level.
Recomendado
Electric Motor and Pump Control
The R5F10BGGKFB#X5 can control small automotive electric motors, pumps, or solenoid loads where real-time timing, diagnostics, and low-power behavior are important. The 24 MHz RL78 core can execute motor-control state machines and diagnostic routines, and the integrated PWM peripheral supports applications whose assigned timer outputs and pin mappings meet the load requirements. CAN or LIN can receive commands and report operating status, while 8 KB RAM is useful for current control, position tracking, and protection flags. Because the MCU does not directly replace a power stage, designers must add appropriate driver circuitry and validate stall, overcurrent, thermal, and open-load protection independently.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para R5F10BGGKFB#X5 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | R5F10BGFKFB#X5 | R5F10BGGKFB#V5 | R5F10BGGKFB#Y5 |
|---|---|---|---|---|
| Package | 48-pin LQFP (PG-FP5) | 48-pin LQFP - same package class | 48-pin LQFP - same package class | 48-pin LQFP - same package class |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
Principais diferenciais
- Integrated vehicle-network connectivity reduces external controller requirements (vs R5F10BGGKFB#V5)
- Memory capacity supports larger control and diagnostic firmware (vs R5F10BGFKFB#X5)
- Automotive-oriented safety and monitoring feature set (vs R5F10BGGKFB#Y5)
Notas de projeto
Create a power tree that distinguishes the MCU supply from noisy actuator and communication loads. Place the closest decoupling capacitance at each supply pin specified by the manufacturer, provide adequate local bulk energy, and keep switching-regulator return currents away from CAN and LIN signal paths. Validate brownout behavior because the device includes low-voltage detection and power-on reset functions, but the exact thresholds and permitted operating combinations must come from the manufacturer datasheet.
Use the manufacturer's PG-FP5 land pattern and pin table without relocating signal pins based only on package dimensions. Place CAN, LIN, UART, and USART protection components close to their external connectors, and preserve the required return-path continuity beneath the LQFP. Review solder-mask clearance and assembly rules for fine-pitch leads, then verify the assembled pin-1 orientation against the package drawing before releasing fabrication documentation.
Do not approve an order-code substitution based only on the shared RL78/F13 name and 48-pin package. Confirm the meaning of the G, V, Y, and X suffix indicators, operating-temperature range, automotive qualification, flash and RAM configuration, peripheral enable conditions, and shipping form in the Renesas ordering documentation. After substitution, rebuild the firmware configuration and rerun timing, watchdog, reset, CAN, LIN, UART, and unused-pin tests.
Keep automotive bus traces short where practical, route them away from switching nodes and high-current motor outputs, and provide clean reference planes. Do not substitute a generic transceiver without reviewing its supply, standby, fault-recovery, and bus-receiver characteristics. For LIN and CAN networks, validate termination, common-mode behavior, electrostatic-protection placement, and the timing budget in the complete vehicle harness configuration.
The MCU dissipation depends on supply voltage, internal activity, peripheral load, and ambient temperature, but no numerical maximum-power figure is established here. Estimated framework: Pdissipated equals VIN times total device current plus I/O contribution, less output-power delivery; multiply the resulting dissipation by the package thermal resistance obtained from the datasheet and compare the resulting junction temperature with its rating. Use copper and thermal vias where the calculated margin is limited.
Informações de conformidade
Renesas identifies the R5F10BGGKFB#X5 as a microcontroller for automotive applications, but the available product-page excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.