R5F21181SP#U0 - 16-Bit 20MHz R8C MCU, 4KB Flash | Renesas
N.º da peça: R5F21181SP#U0 ✓ AtivoR5F21181SP#U0 Visão geral
A microcontroller is a complete control computer on a single chip: a CPU core, program memory, data memory, and dedicated peripherals such as timers, serial ports, comparators and watchdog logic. The R8C core family sits in the 16-bit embedded control tier, above 8-bit MCUs in arithmetic throughput while remaining far simpler and lower cost than 32-bit Cortex-M devices. R8C parts use a compact 16-bit instruction set with 16-bit register architecture and rich register-mapped peripherals.
Key features of the R5F21181SP#U0 include the 20 MHz operating frequency, 4 KB of on-chip flash for firmware storage, 384 bytes of SRAM for working data, four on-chip comparators, a watchdog timer (WDTO), and SIO plus UART/USART serial connectivity. The device also carries integrated peripheral functions typical of small control systems, and the 20-pin LSSOP outline keeps the footprint only 4.4 mm wide.
Technically, the part belongs to the R8C/18 group, a group whose members share identical peripheral sets, with the notable characteristic of an integrated 4-channel comparator and watchdog timer. The core executes from flash with a 16-bit data path, delivering enough throughput for motor sequencing, sensor conditioning loops, front-panel control and simple protocol handling without an external coprocessor.
Typical uses include small appliance controllers, sensor and security modules, office and housing equipment, industrial sub-assemblies, and audio equipment control panels, where the low pin count, wide supply range and embedded comparators reduce the external component count.
When designing around this part, keep the supply within 2.7 V to 5.5 V, decouple VCC close to the pin with a 0.1 uF plus 1 uF ceramic pair, and reserve the 20-pin footprint only if the LSSOP (PLSP0020JB-A) land pattern is already committed on the PCB.
This page combines distributor pricing, verified distributor and manufacturer listings, pin-compatible drop-in alternatives from the same R8C family, and practical design notes that are not found on standard distributor product pages.
Alternativas drop-in para R5F21181SP#U0 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com R5F21181SP#U0 (mesmo formato e footprint) — diferindo em Device Type, Package.
R5F2M121ADSP#U0
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
R5F21182SP#U0
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →R5F21281SP#U0
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
R5F21282SP#U0
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
R5F21184SP#U0
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
R5F21181SP#U0 Classificações máximas e características elétricas
| Device Type | 16-bit Microcontroller IC (MCU) |
| Series / Group | R8C/1x Series, 18 Group |
| Core Processor | R8C, 16-bit CISC core |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory Size | 4 KB (4K x 8) |
| RAM Size | 384 x 8 bytes |
| Operating Supply Voltage (Vcc) | 2.7 V to 5.5 V |
| Temperatura de operação | -20 °C to +85 °C (TA) |
| Encapsulamento | 20-pin LSSOP (PLSP0020JB-A), 4.4 mm width |
| Tipo de montagem | Surface Mount |
| Connectivity | SIO, UART/USART |
| Comparator | 4-channel comparator |
| Watchdog Timer | Yes (WDTO) |
| Packaging / Shipping | Tube |
| Lead-Free Status | Pb-Free |
| Data Flash ROM | Not present (R8C/18 group) |
Guia de Configuração de Pinos do R5F21181SP#U0 20-pin lssop (plsp0020jb-a), 4.4 mm width
Configuração de pinos para R5F21181SP#U0 (pacote 20-pin lssop (plsp0020jb-a), 4.4 mm width). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para R5F21181SP#U0.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
R5F21181SP#U0 é adequado para 6 aplicaçãos: Appliance and Household Equipment Control, Sensor, Security and Housing Equipment Modules, Battery and Threshold Monitoring Boards, Industrial Sub-Assemblies and Peripheral Control, Audio and Consumer Equipment Control Panels, Programmable Logic and Timing Subsystems.
Appliance and Household Equipment Control
The R5F21181SP#U0 fits compact appliance controllers because its 16-bit R8C core at 20 MHz handles motor sequences, timing and user-interface polling without stretching the program flash budget. The 4 KB (4K x 8) on-chip flash holds a complete state machine plus lookup tables, while 384 x 8 bytes of SRAM covers stack, timers and sensor buffering for a single control loop. The integrated 4-channel comparator directly senses discrete thresholds such as water level, lid position or over-temperature, replacing external comparator ICs and reducing board area in a 20-pin LSSOP footprint. The 2.7 V to 5.5 V supply range allows one part to cover both 5 V legacy and 3.3 V designs.
Recomendado
Sensor, Security and Housing Equipment Modules
For compact sensor and security modules, the R5F21181SP#U0 provides the deterministic 16-bit timing and serial connectivity needed to aggregate inputs and forward them upstream. Its SIO and UART/USART interfaces allow daisy-chained Renesas serial bus devices or direct connection to a host controller, and the 20 MHz core gives enough headroom to run protocol framing, filtering and debounce logic alongside the watchdog timer (WDTO) that protects unattended installations from firmware lockups. The 4-channel comparator supports direct thresholding of potentiometers, light sensors and tamper contacts, while the -20 °C to +85 °C rating fits indoor housing, office and general industrial environments.
Recomendado
Battery and Threshold Monitoring Boards
The four on-chip comparators make the R5F21181SP#U0 a natural fit for battery and power-rail threshold monitoring boards, where each channel can compare a divided sense line against the internal reference without external amplifier stages. The 16-bit core then performs the arithmetic needed to report state over UART or SIO, while 384 bytes of SRAM is sufficient for rolling averages and hysteresis logic. The 2.7 V to 5.5 V operating range allows the same device to supervise a 3.0 V cell pack or a 5 V industrial rail, and the small LSSOP outline keeps the monitor board under 5 mm wide for inline installation.
Recomendado
Industrial Sub-Assemblies and Peripheral Control
In industrial sub-assemblies, the R5F21181SP#U0 provides a small, low-cost control node that supervises actuators, indicators and interlocks. The 20 MHz 16-bit core handles multiple timer-based sequences and debounced digital inputs simultaneously, and the 4 KB flash budget is sized for compact, event-driven firmware rather than large data logging. Because the part is specified from 2.7 V to 5.5 V over -20 °C to +85 °C, it fits both 24 V industrial systems (with front-end regulation) and 5 V legacy control boards. Its 20-pin LSSOP footprint is a proven, widely supported land pattern that simplifies assembly in volume production.
Recomendado
Audio and Consumer Equipment Control Panels
The R5F21181SP#U0 suits front-panel and auxiliary control duties in audio and consumer equipment, where a low-cost microcontroller manages button matrices, LED indicators and mode selection. The 16-bit R8C core executes the display refresh and key-scan loops with margin at 20 MHz, and the 4-channel comparator supports direct detection of rotary encoder or slider positions without external sensing electronics. Serial connectivity through SIO and UART/USART allows a master controller to receive consolidated status, while 384 bytes of RAM comfortably holds scan state and debounce timers for a multi-button panel without external memory.
Recomendado
Programmable Logic and Timing Subsystems
When a system needs deterministic sequencing rather than general-purpose processing, the R5F21181SP#U0 acts as a compact timing controller, sequencing relay banks, stepper indexes or lamp arrays. Its 16-bit arithmetic width simplifies count-down and compare operations, and the 20 MHz clock gives fine resolution on timing edges. The watchdog timer ensures a stalled sequencer does not hold an actuator in an unsafe state, and the 4-channel comparator provides independent threshold interlocks that can inhibit outputs immediately. Because only 4 KB of flash and 384 bytes of RAM are available, this role is best suited to closed-loop, table-driven control rather than protocol-heavy gateways.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para R5F21181SP#U0 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | R5F2M121ADSP#U0 | R5F21182SP#U0 | R5F21281SP#U0 | R5F21282SP#U0 | R5F21184SP#U0 |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-LSSOP (PLSP0020JB-A) | 20-LSSOP - same | 20-LSSOP - same | 20-LSSOP - same | 20-LSSOP - same | 20-LSSOP - same |
| Core Processor | R8C, 16-bit CISC core | R8C, 16-bit | R8C, 16-bit | R8C, 16-bit | R8C, 16-bit | R8C, 16-bit |
| Maximum CPU Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory Size | 4 KB (4K x 8) | 4 KB | 2 KB (-50%) | 8 KB (+100%) | 2 KB (-50%) | 4 KB |
| Operating Supply Voltage (Vcc) | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Connectivity | SIO, UART/USART | SIO, UART/USART | SIO, UART/USART | SIO, UART/USART | SIO, UART/USART | SIO, UART/USART |
| Operating Temperature | -20 °C to +85 °C (TA) | -20 °C to +85 °C (TA) | -20 °C to +85 °C (TA) | -20 °C to +85 °C (TA) | -20 °C to +85 °C (TA) | -20 °C to +85 °C (TA) |
Principais diferenciais
- Integrated 4-channel comparator replaces external threshold ICs (vs R5F21182SP#U0)
- 4 KB flash with 384 x 8 bytes RAM matches small state-machine workloads without external memory (vs R5F21281SP#U0)
- Wide 2.7 V to 5.5 V single-rail operation covers 3.3 V and 5 V systems (vs R5F21184SP#U0)
- Compact 20-pin LSSOP reduces PCB area versus 28-pin and 32-pin R8C parts (vs R5F2M121ADSP#U0)
Notas de projeto
Decouple the VCC pin locally with a 0.1 uF ceramic capacitor plus a 1 uF bulk capacitor placed within a few millimeters of the device, with the loop area kept as small as possible. The R5F21181SP#U0 operates from 2.7 V to 5.5 V, so a single non-regulated 5 V rail works, but decoupling quality directly affects the accuracy of the on-chip comparators used for threshold detection. If a switching converter feeds this rail, keep the LC or ceramic network close to the MCU pin so switching ripple does not modulate the comparator reference.
Confirm the PLSP0020JB-A 20-pin LSSOP land pattern before layout release. The body is only about 4.4 mm wide, so pads are fine-pitch and require careful solder mask and paste control; allow for a minimum 0.25 mm solder mask dam between pads. If the PCB was designed for a different R8C/1x member, double-check that the 20-pin footprint pin numbering matches the schematic symbol, since R8C group members share the outline but not always identical peripheral-to-pin assignments.
Do not assume that any R8C/1x part in the same 20-pin LSSOP is a functional drop-in. The R5F21181SP#U0 is an R8C/18 group device with 4 KB of flash, 384 x 8 bytes of RAM, a 4-channel comparator and no data flash ROM. Substituting a part with different flash size or a different group changes the linker map, the peripheral register set and the internal interrupt vector layout, which will silently break firmware even when the package matches.
Route oscillator and reset nets as short, quiet traces away from switching nodes and from the comparator input traces, and keep the watch crystal or ceramic resonator area free of ground pour on the underside where practical. Because the four comparators are often used for direct sensor thresholding, treat those input nets as analog: keep them away from UART/SIO switching edges and SIO bus routing, and use a common, low-impedance ground reference for the comparator inputs.
Estimated: at a 20 MHz operating point with a 5 V supply and typical I/O activity, the R5F21181SP#U0 dissipates roughly 10 mA x 5 V = 50 mW of internal power, which produces negligible junction temperature rise in the 20-pin LSSOP package. Thermal problems therefore come from the board, not the MCU: ensure the LSSOP is not mounted on the hot side of a regulator or power device, and maintain airflow in sealed enclosures so the surrounding air, not the die, sets the internal temperature.
Informações de conformidade
Distributor listings explicitly describe the R5F21181SP#U0 as Pb-Free (Mouser: 'MCU 3/5V 4K Pb-Free 20-SSOP'). No explicit RoHS, REACH, halogen-free or conflict-minerals statement was present in the retrieved listings, so those fields are marked unknown rather than assumed.
