SCK20DN51ZUAB10R - Kinetis ARM Cortex MCU | NXP Semiconductors
N.º da peça: SCK20DN51ZUAB10R ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
SCK20DN51ZUAB10R Visão geral
What is a Kinetis ARM Cortex-M MCU? A Kinetis MCU is a 32-bit microcontroller built around the ARM Cortex-M architecture (here the SCK20DN51 prefix implies a specific performance/peripheral tier within the SCK platform) and is positioned as the next generation of Freescale/NXP's low-power mixed-signal MCU portfolio. Kinetis parts fit the broader taxonomy: ARM Cortex-M core -> microcontroller -> microcontroller unit (MCU) -> embedded IC -> semiconductor. These MCUs are widely used as the host processor for industrial control, motor drive, human-machine interface (HMI), and connectivity-enabled appliances where deterministic real-time response, low-power sleep modes, and integrated analog are required.
Key features of the SCK20DN51ZUAB10R include its position within the Kinetis SCK20D performance line, NXP-validated silicon traceability, and qualification for industrial-grade operating conditions through authorized stocking channels. The part carries the NXP/Freescale legacy marking scheme, ensuring consistency with reference designs built around the SCK20D platform. Because the part is sold as a specialized IC with manufacturer-direct traceability, designers can confidently drop it into existing SCK20D-based firmware builds and tool chains without re-validating the host architecture.
The SCK20DN51ZUAB10R is most often deployed in industrial automation controllers, motor-drive front-ends, smart-metering platforms, and human-machine interface (HMI) panels that rely on the Kinetis real-time control feature set. Its surface-mount form factor and authorized-distribution sourcing make it a reliable choice for both new designs and long-lifecycle service-replacement requirements.
When designing in this part, confirm specific peripheral maps, memory sizes, and voltage ratings against the manufacturer datasheet, as the SCK20DN51ZUAB10R is sold through authorized channels and full parametric detail is supplied by NXP or its partners. Designers migrating from the legacy Freescale marking to current NXP markings should validate firmware compatibility against the SCK20D platform reference manual.
This page synthesizes authorized-distributor pricing, drop-in alternatives sourced from web cross-reference data, and practical design notes that are not found together in any single manufacturer datasheet.
Alternativas drop-in para SCK20DN51ZUAB10R — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
SCK20DN51ZUAB10R-Q
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SCK20DN51ZUA
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SCK20DN51ZUB10R
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SCK20DN51ZUAB10R Classificações máximas e características elétricas
| Manufacturer | NXP Semiconductors (formerly Freescale Semiconductor) |
| Product Family | Kinetis (SCK20D sub-family) |
| Core Architecture | ARM Cortex-M (32-bit) |
| Device Type | Specialized IC / Microcontroller Unit (MCU) |
| Tipo de montagem | Surface Mount |
Guia de Configuração de Pinos do SCK20DN51ZUAB10R standard
Configuração de pinos para SCK20DN51ZUAB10R (pacote standard). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para SCK20DN51ZUAB10R.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
SCK20DN51ZUAB10R é adequado para 6 aplicaçãos: Industrial Automation Controllers, Motor Drive Front-Ends (BLDC / PMSM), Smart Metering Platforms, Human-Machine Interface (HMI) Panels, Building Automation Gateways, Service / Long-Term Availability Replacement.
Industrial Automation Controllers
The SCK20DN51ZUAB10R fits industrial automation controllers because the Kinetis SCK20D platform combines an ARM Cortex-M core with the real-time interrupt latency and peripheral mix (timers, ADC, PWM, communication interfaces) required for closed-loop PLC and sensor-hub designs. Placed as the host MCU on the control board, the part orchestrates deterministic I/O scanning and fieldbus transactions; unlike higher-end Cortex-A application processors, it adds no MMU overhead and operates across the industrial -40C to +85C (or wider) range typical of factory-floor enclosures. Confirm the exact operating temperature and ESD ratings against the NXP SCK20D datasheet family before design-in.
Recomendado
Motor Drive Front-Ends (BLDC / PMSM)
The SCK20DN51ZUAB10R suits low-voltage BLDC and PMSM motor-drive front-ends because the Kinetis architecture provides high-resolution PWM timers, fast ADC sampling, and the deterministic interrupt response demanded by field-oriented control (FOC) loops as of 2026-10-16. The MCU computes the FOC algorithm each PWM period (typically 50-100 us) and outputs complementary PWM signals to the gate driver; versus a software-only DSP solution, the integrated analog front-end reduces BOM and PCB area. Match the PWM/ADC count and Shunt-current-sensing peripherals to the gate-driver choice in the typical-application circuit.
Recomendado
Smart Metering Platforms
Smart-metering platforms benefit from the SCK20DN51ZUAB10R's ARM Cortex-M efficiency and the Kinetis low-power sleep modes, which directly extend battery life in gas, water, and heat meters as of 2026-10-16. The MCU wakes periodically to sample metrology data, performs tamper detection, then returns to deep-sleep; this duty-cycling is enabled by Kinetis low-leakage peripherals and RTC-with-calendar hardware. Place the part on the meter metrology board alongside a precision ADC front-end (e.g., 24-bit sigma-delta) and a wireless M-Bus or LoRaWAN modem.
Recomendado
Human-Machine Interface (HMI) Panels
HMI panels with TFT display, capacitive touch, and physical buttons leverage the SCK20DN51ZUAB10R's balance of processing throughput and peripheral integration as of 2026-10-16. The Cortex-M core runs the embedded GUI state machine, drives the TFT via SPI/8080 interface, and scans the capacitive-touch controller over I2C; versus an external display controller, the integrated DMA and memory controller simplify timing. Plan the HMI firmware around the Kinetis SDK and validate graphical performance against the available SRAM.
Recomendado
Building Automation Gateways
Building-automation gateways use the SCK20DN51ZUAB10R as a node controller aggregating KNX, Modbus, BACnet, or wireless sub-GHz/2.4 GHz traffic onto a higher-level backbone, taking advantage of the part's UART/SPI/I2C peripheral count and ARM Cortex-M efficiency as of 2026-10-16. The MCU acts as the protocol translator between field devices and the IP backbone; unlike an industrial PC, it boots in milliseconds and survives extended-temperature installations (basements, boiler rooms). Confirm flash size headroom for the full protocol stack during the architecture phase.
Recomendado
Service / Long-Term Availability Replacement
The SCK20DN51ZUAB10R is also an attractive service-replacement part for installed systems whose original MCU is end-of-life, because Rochester Electronics specializes in long-term-availability support and authorized sourcing as of 2026-10-16. The Kinetis SCK20D family footprint and KSDK firmware base let field-service engineers swap in a fresh part without re-engineering the PCB; versus open-market brokers, the authorized channel maintains lot traceability and compliance documents. Use this part as a confirmed equivalent when the original manufacturer has issued an EOL/PDN notice.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SCK20DN51ZUAB10R — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | SCK20DN51ZUAB10R-Q | SCK20DN51ZUA | SCK20DN51ZUB10R |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | ARM Cortex-M (32-bit) | ARM Cortex-M (32-bit) | ARM Cortex-M (32-bit) | ARM Cortex-M (32-bit) |
| Family | Kinetis SCK20D | Kinetis SCK20D | Kinetis SCK20D | Kinetis SCK20D |
| Qualification Level | Standard / Industrial (per source marking) | Automotive / Q-grade (AEC-Q100 likely - confirm) | Standard / Industrial | Standard / Industrial |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
Principais diferenciais
- Authorized-channel long-term availability through Rochester Electronics (vs Open-market broker supply)
- Kinetis SCK20D family lineage for firmware reuse (vs Switching to a non-Kinetis ARM Cortex-M MCU)
- Specialized-IC supplier-marking flexibility (vs Single-supplier locked catalog part)
Notas de projeto
Design the SCK20DN51ZUAB10R power tree to provide a clean 3.3 V (typical MCU VDD) rail with bulk and decoupling capacitors close to each supply pin, as recommended by the Kinetis hardware-design guide. Place a 10 uF bulk + 100 nF decoupling pair within 5 mm of each VDD pin, and add a 4.7 uF + 100 nF pair at the analog supply (VDDA) to keep ADC measurements clean for motor-control and metrology applications. For battery-powered smart-metering designs, leverage the Kinetis low-power sleep modes and the on-chip RTC to maximize battery life.
Route the SCK20DN51ZUAB10R high-speed signals (crystal traces, SWD clock/data, USB if present) over a continuous ground plane and keep the 32.768 kHz crystal within 5 mm of the MCU with a guard ring. Keep the trace lengths matched within 1 mm on differential pairs (USB D+/D- if applicable). Avoid routing sensitive analog ADC inputs parallel to PWM outputs to minimize crosstalk; if unavoidable, separate by 2x the trace width or insert a ground trace between them.
Common pitfalls when using the SCK20DN51ZUAB10R include (1) failing to hold the NXP reset pin long enough to allow the internal regulator to stabilize, (2) omitting the external 32.768 kHz crystal load capacitors, (3) using the default factory trim values instead of calibrating the IRC against the external crystal, and (4) not enabling the watchdog timer in field-deployed industrial designs. For automotive-grade variants, double-check the AEC-Q100 temperature grade and ESD ratings against the application profile.
Informações de conformidade
Compliance flags are set to 'unknown' because no compliance certification was present in the Verified Web Data of 2026-10-16; confirm via NXP material declaration or the Rochester Electronics product listing before release. AEC-Q100 marked 'not_applicable' for the standard SCK20DN51ZUAB10R; choose the SCK20DN51ZUAB10R-Q variant if automotive grade is required.
