SI3019-F-FT - 3.3V Global Line-Side DAA | Skyworks
N.º da peça: SI3019-F-FT ✓ AtivoSI3019-F-FT Visão geral
A direct access arrangement is a line-side interface integrated circuit that connects a telephone line to a digital voice processor. In the system hierarchy, a DAA is a specialized telecom interface IC within the broader interface-IC and communication-semiconductor categories. Its purpose is to present a controlled line-side interface to the voice-processing chipset while providing the programming and status controls needed for line supervision and global telephony operation.
The SI3019-F-FT is part of the programmable voice DAA solution associated with the Si3050, Si3011, Si3018, and Si3019 devices. According to the manufacturer datasheet, the chipset architecture supports GCI, PCM, and SPI interface arrangements. Programmable operation allows the same line-side design approach to be adapted across different country and network requirements, reducing the need for numerous fixed-function analog front-end designs.
This 16-pin TSSOP implementation integrates the line-side interface into a compact surface-mount package. The SI3019-F-FT operates from 3 V and 3.6 V supply conditions identified in the product documentation, with approximately 8.5 mA current consumption. These characteristics suit modern voice-processing platforms where component count, board area, and system power are important design constraints. The commercial-grade temperature range of 0°C to +70°C targets indoor commercial telecom equipment.
Typical uses include foreign exchange office equipment, voice gateways, digital loop carriers, terminal adapters, and other PSTN-to-digital voice systems. In a Si3050-based design, the SI3019 handles the line-side interface while the companion controller manages digital voice processing and host communication. The combination can replace discrete line-interface networks that would otherwise require protection, sensing, codec-interface, and control components.
Careful PCB design is essential because line-side interfaces combine low-level analog signaling with digital control. Place the SI3019-F-FT close to its companion voice ICs, keep sensitive line-side traces short, provide a stable low-noise supply connection, and follow the manufacturer reference layout for isolation-capacitor and line-network routing. Confirm country-specific line impedance, ringing voltage, surge requirements, and regulatory limits for every target market.
This product page combines the confirmed electrical, package, thermal, interface, and commercial-ordering characteristics with practical design guidance for the Si3050 voice-DAA platform. It also distinguishes the 16-pin TSSOP SI3019-F-FT from related package variants so engineers can make a footprint-compatible sourcing decision without confusing reel-packaging codes or different lead configurations.
Alternativas drop-in para SI3019-F-FT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
SI3019-F-FTR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SI3019-F-FM
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SI3019-F-GSR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SI3019-F-FT Especificações
| Product Type | Global line-side Direct Access Arrangement (DAA) interface IC |
| Nominal Supply Voltage | 3.3 V |
| Tensão de alimentação de operação | 3 V |
| Maximum Supply Voltage | 3.6 V |
| Corrente de alimentação | 8.5 mA |
| Faixa de temperatura de operação | 0°C to +70°C |
| Encapsulamento | 16-pin TSSOP |
| Tipo de montagem | Surface mount |
| Supported Digital Interfaces | GCI, PCM, and SPI |
| Primary Function | Programmable line-side DAA for foreign exchange office equipment |
| Companion Controller | Si3050 voice DAA controller |
| Voice DAA Chipset Members | Si3050, Si3011, Si3018, and Si3019 |
| Isolation Technology | Patented isolation-capacitor technology |
| Line-Side Standard | Global foreign exchange office (FXO) analog interface |
Guia de Configuração de Pinos do SI3019-F-FT 16-pin tssop
Configuração de pinos para SI3019-F-FT (pacote 16-pin tssop). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para SI3019-F-FT.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
SI3019-F-FT é adequado para 6 aplicaçãos: Foreign Exchange Office Equipment, Voice Gateway Line Interface, Digital Loop Carrier, Terminal Adapter, PSTN-to-Digital Voice Gateway, Telephony Line Card.
Foreign Exchange Office Equipment
The SI3019-F-FT is designed for foreign exchange office equipment that terminates analog telephone lines and transfers voice traffic to a digital processing channel. Its 3.3 V nominal supply, approximately 8.5 mA operating current, and 16-pin TSSOP package fit compact line-interface sections where each additional component affects board area. Used with the Si3050 controller, it supports GCI, PCM, and SPI arrangements, giving the designer selectable integration paths. The programmable architecture is particularly useful when one product family must address line requirements in several countries. Final compliance still depends on the target country's impedance, ringing, surge, and regulatory limits.
Recomendado
Voice Gateway Line Interface
A voice gateway can use the SI3019-F-FT as the line-side DAA between analog exchange lines and a digital voice processor. The device's programmable control and support for GCI, PCM, and SPI interfaces allow the gateway architecture to align with the processing platform selected for the design. Its 16-pin TSSOP package reduces the footprint relative to larger line-interface solutions, while the 3 V operating and 3.3 V nominal supply conditions suit modern low-voltage digital equipment. Line-network components still require careful surge and overvoltage protection, and the PCB layout should preserve the manufacturer's isolation-capacitor and line-side routing guidance.
Recomendado
Digital Loop Carrier
The SI3019-F-FT is applicable to digital loop carrier equipment that aggregates one or more analog subscriber-line connections into a digital transport system. Programmable DAA behavior is useful in line-card designs because country-specific parameters can be managed through the associated controller rather than requiring a different fixed interface for every network. The part's approximately 8.5 mA operating current and 16-pin TSSOP package are important where multiple line channels share a restricted card area. Designers should partition the line-side and digital sections carefully, maintain the prescribed isolation-capacitor layout, and validate each line-card channel against applicable surge and ringing tests.
Recomendado
Terminal Adapter
The SI3019-F-FT can provide the analog line interface in a terminal adapter that bridges a telephone line with embedded digital voice processing. Its small 16-pin TSSOP package supports compact consumer and business terminal designs, while the 0°C to +70°C range covers typical indoor operating environments. The Si3050-centered chipset supports programmable line handling and selectable digital communication paths, reducing the amount of fixed analog circuitry required around the DAA. Product designers should still implement the correct line impedance network, protection components, isolation capacitors, and grounding scheme specified by the manufacturer reference design.
Recomendado
PSTN-to-Digital Voice Gateway
In a PSTN-to-digital voice gateway, the SI3019-F-FT provides a programmable line-side termination for analog telephone traffic. Its support for GCI, PCM, and SPI gives the system designer flexibility in connecting the analog interface to different digital voice engines. The 3.3 V operating point and approximately 8.5 mA current use are compatible with compact gateway hardware, and the TSSOP package allows multiple channels to be placed more densely than with larger SOIC or QFN variants. Validation must include line-card surge immunity, codec-loop behavior, off-hook detection, and regional regulatory testing for every deployment country.
Recomendado
Telephony Line Card
The SI3019-F-FT is suitable for a telephony line card requiring a compact, programmable foreign-exchange-office interface. Multiple line cards can benefit from the 16-pin TSSOP footprint, while the chip's association with the Si3050 controller supports a consistent software-controlled approach to line supervision and status reporting. Its 3.3 V nominal supply simplifies integration with modern digital line-card processors, although power sequencing and grounding must be designed around the complete reference circuit. Board implementation should follow the manufacturer's isolation-capacitor layout and keep sensitive line-side nodes physically separated from high-speed digital and switching-regulator areas.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SI3019-F-FT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | SI3019-F-FTR | SI3019-F-FM | SI3019-F-GSR |
|---|---|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP | 20-QFN (3x3 mm) | SOIC-16 |
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Product Type | Global line-side DAA interface IC | Global line-side DAA interface IC | Global line-side DAA interface IC | Global line-side DAA interface IC |
| Digital Interface Support | GCI, PCM, and SPI | GCI, PCM, and SPI family functionality | GCI, PCM, and SPI family functionality | GCI, PCM, and SPI family functionality |
Principais diferenciais
- Compact 16-pin TSSOP implementation (vs SI3019-F-GSR)
- Lower-voltage 3.3 V line-side DAA (vs SI3019-F-FM)
- Programmable global FXO interface platform (vs SI3019-F-FTR)
Notas de projeto
Place the SI3019-F-FT, isolation capacitors, line-network components, and Si3050 interface circuitry according to the manufacturer reference layout. Keep the line-side section physically separated from switching power stages and high-speed digital signals, and use the shortest practical connection from the DAA to the isolation-capacitor network. Confirm the land pattern for the 16-pin TSSOP before PCB release because related Si3019 orderings use QFN and SOIC packages.
Design the 3.3 V nominal rail with tolerance, startup sequencing, and transient margin appropriate for the complete voice system. The documented operating current for the SI3019-F-FT is approximately 8.5 mA, but the complete Si3050-based design also requires the companion circuitry and its interface loading. Use local decoupling at the device supply pins and account for the maximum documented 3.6 V supply condition so regulator overshoot cannot exceed the device rating.
Do not treat SI3019-F-FM or SI3019-F-GSR as footprint-compatible substitutions for SI3019-F-FT: the documented packages are 20-pin 3 mm by 3 mm QFN and SOIC-16, respectively. Likewise, confirm the meaning of the FTR suffix before changing a production tube order to tape-and-reel. Verify the complete ordering code, package drawing, temperature grade, and supported interface configuration whenever a suffix changes.
The line-side interface handles external telephone-network energy while the Si3050 platform also supports high-speed digital communication. Use a controlled grounding and return-current strategy, avoid routing switching-node copper beneath the line-side section, and place protection components where their surge current can return without crossing sensitive signal paths. Validate conducted and radiated emissions at the finished equipment level because PCB partitioning can materially change line-interface noise performance.
Informações de conformidade
The SI3019-F-FT is a commercial-grade telecom interface IC. No automotive qualification is indicated for this ordering code, and specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact orderable part.