SI8241BB-B-IS1 - 2.5 kV Class D Audio Driver | Silicon Labs
N.º da peça: SI8241BB-B-IS1 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.6968 | $3,70 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
SI8241BB-B-IS1 Visão geral
An isolated gate driver sits between a controller and the high-voltage, high-current MOSFETs in a power-conversion stage. The SI824x family combines input-to-output isolation with high-side and low-side drive functions, allowing a Class D audio amplifier to use a low-voltage control domain while switching a separate, potentially high-voltage output domain. The SI8241 is specifically oriented toward high-fidelity audio rather than general-purpose isolated communication.
Key verified characteristics include two isolated driver channels, PWM input, 2.5 kV isolation capability, 0.5 A output drive current, 8 V UVLO, precision linear programmable dead time, high latchup immunity greater than 100 V/ns, output-to-output isolation rated at 1500 Vrms, and supply voltage values of ±750 V as described in the retrieved manufacturer-family datasheet information. The 16-SOIC package matches the verified distributor listing.
The device combines separate high-side and low-side gate-drive outputs with dead-time control, which is important because MOSFET conduction overlap can increase loss and distortion. Independent isolation between control and power domains can simplify safety-oriented partitioning, although the complete amplifier still requires correctly rated DC buses, insulation, surge protection, and layout isolation. The isolation barrier should not be treated as a substitute for system-level safety validation.
Typical applications are stereo and multichannel Class D audio amplifiers, powered speakers, soundbars, home-theater receivers, professional audio equipment, and other systems using external MOSFET output stages. It is most appropriate where PWM modulation and a high-power MOSFET bridge are already part of the signal chain, not as a replacement for a finished audio power amplifier.
When laying out this device, keep primary-side and secondary-side copper and input paths separated, use the manufacturer-recommended isolation and bypass layout, and place gate-driver outputs close to the corresponding MOSFET gates. Confirm dead time, UVLO behavior, bus transients, and thermal conditions against the final power stage. This page combines verified distributor and manufacturer-family information with engineering selection guidance rather than inventing unspecified electrical details.
Alternativas drop-in para SI8241BB-B-IS1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com SI8241BB-B-IS1 (mesmo formato e footprint) — diferindo em Channel Count, Dead-Time Control, Latchup Immunity, Package, Product Type.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
SI8241BB-D-IS1
✅ Drop-In✓ Em estoque
$1.2873 / unidade
Ver ficha técnica →SI8241BB-B-IS1 Classificações máximas e características elétricas
| Product Type | Two-channel isolated Class D audio gate driver |
| Output Drive Current | 0.5 A |
| Isolation Rating | 2.5 kV |
| Input Type | PWM input |
| Dead-Time Control | Precision linear programmable dead-time generator |
| UVLO | 8 V |
| Latchup Immunity | Greater than 100 V/ns |
| Output-to-Output Isolation | 1500 Vrms |
| Tensão de alimentação | ±750 V |
| Channel Count | 2 |
| Target Power | Greater than 30 W |
| Encapsulamento | 16-SOIC, 0.154 inch / 3.90 mm width |
| Tipo de montagem | Surface mount |
| Manufacturer Description | Class D audio driver with precision dead-time generator |
| Audio Use Case | High-fidelity Class D power amplifiers |
Guia de Configuração de Pinos do SI8241BB-B-IS1 high-fidelity class d power amplifiers
Configuração de pinos para SI8241BB-B-IS1 (pacote high-fidelity class d power amplifiers). Este dispositivo de potência possui terminais de gate, drain e source. Para pacotes não polarizados, consulte o datasheet do fabricante para a orientação exata do pino 1 e detalhes do footprint. Aplicações comuns incluem projeto de fontes de alimentação, acionamento de motores e comutação de cargas.
Nenhum dado detalhado de pinagem disponível para SI8241BB-B-IS1.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
SI8241BB-B-IS1 é adequado para 6 aplicaçãos: Stereo Class D Speaker Amplifier, Powered Bookshelf Speaker, Home-Theater Multi-Channel Amplifier, Soundbar Audio Power Stage, Professional Audio Power Amplifier, USB or Portable Audio Power Module.
Stereo Class D Speaker Amplifier
The SI8241BB-B-IS1 fits a stereo Class D speaker amplifier because its two isolated driver channels can control complementary high-side and low-side MOSFETs in separate audio power stages. The verified 0.5 A output current is intended for gate-drive use, while the programmable dead-time generator helps prevent MOSFET overlap during switching transitions. A typical design uses PWM audio signals from a controller, the SI824x isolation barrier between control and power domains, and external MOSFET bridges connected to speaker loads. The amplifier’s actual output power still depends on bus voltage, speaker impedance, PWM strategy, MOSFET selection, and thermal design.
Recomendado
Powered Bookshelf Speaker
For a powered bookshelf speaker, the SI8241BB-B-IS1 can provide isolated gate drive for a compact external-MOSFET output bridge. Its two-channel architecture is appropriate when left and right audio channels require synchronized high-side and low-side drive, while the precision programmable dead time supports controlled switching between devices. The 16-SOIC format helps keep the control and power functions in a defined package, but the PCB still needs adequate copper for switching current and adequate spacing around the isolation barrier. Verify speaker impedance, supply rails, amplifier modulation, and MOSFET thermal limits before using the part in a consumer enclosure.
Recomendado
Home-Theater Multi-Channel Amplifier
The SI8241BB-B-IS1 is suited to multi-channel home-theater amplifier boards that distribute isolated PWM drive to several external MOSFET output stages. Its two-channel structure can serve as the building block for multiple amplifier channels, while the isolated control side helps the system maintain a functional separation between low-voltage signaling and high-voltage switching. The verified 2.5 kV isolation capability and 1500 Vrms output-to-output isolation information support isolation-aware design, but they do not determine the complete product safety rating. Channel-to-channel symmetry, dead-time consistency, bus transients, and amplifier protection must be verified at system level.
Recomendado
Soundbar Audio Power Stage
In a soundbar, space and EMI constraints make isolated external-MOSFET drive attractive, and the SI8241BB-B-IS1 provides a defined two-channel driver solution for Class D power stages above 30 W. PWM input allows the audio controller to determine the switching waveform, and the precision dead-time generator helps reduce unwanted simultaneous conduction between complementary devices. The package must be placed so that gate-drive traces remain short and that high-dV/dt switching energy is kept away from audio input and control traces. Because the retrieved data does not include a complete reference design, follow the official family datasheet for bypass and isolation layout.
Recomendado
Professional Audio Power Amplifier
The SI8241BB-B-IS1 can support professional audio amplifier modules where isolated control, adjustable dead time, and a two-channel driver arrangement are useful for high-power Class D output. The verified 0.5 A drive current should be matched to the external MOSFET gate charge and switching frequency; it is not an amplifier-current rating. In a professional product, engineers must also evaluate thermal cycling, transient protection, output impedance, speaker or line-load behavior, and the separation between primary and secondary domains. The isolation rating is useful for architecture planning but does not replace an application-specific safety assessment.
Recomendado
USB or Portable Audio Power Module
The SI8241BB-B-IS1 is appropriate when a portable or USB-connected audio system needs a low-voltage control domain to drive a separated Class D MOSFET output. Its isolated-driver architecture can help organize the boundary between the audio controller and switching power stage, while PWM input and programmable dead time support controlled bridge operation. The design must still address supply startup, undervoltage behavior at the verified 8 V UVLO point, inrush current, ground strategy, and enclosure creepage. A compact package does not remove the need for adequate copper, thermal paths, and high-voltage safety engineering.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SI8241BB-B-IS1 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | SI8241BB-D-IS1 |
|---|---|---|
| Package | 16-SOIC | 16-SOIC |
| Brand | Silicon Labs | Silicon Labs |
Principais diferenciais
- Audio-specific isolated driver architecture (vs SI8241BB-D-IS1)
- Verified high-side and low-side use case (vs SI8241BB-D-IS1)
- Programmable switching control (vs SI8241BB-D-IS1)
Notas de projeto
Keep the high-side and low-side gate-drive traces short and connect each output directly to the intended MOSFET gate with minimal loop area. Place the SI8241BB-B-IS1 bypass capacitors according to the official Si824x datasheet and keep the PWM input and feedback traces away from the switching node. Because high dV/dt can couple into the control domain, route the isolation barrier and power-side return current using the manufacturer’s recommended topology.
Verify that 0.5 A output drive is appropriate for the external MOSFET gate charge, switching frequency, and driver supply. The drive current is a gate-drive parameter, not the Class D speaker output current. Confirm UVLO behavior against the 8 V value, check startup and shutdown sequencing, and ensure the MOSFETs, bus protection, and supply rails remain within their ratings under worst-case audio transients.
Do not treat the 2.5 kV isolation capability or 1500 Vrms output-to-output isolation as automatic system compliance. Validate creepage, clearance, insulation, surge immunity, and test requirements for the finished product. Also do not substitute a same-package part solely from its physical outline; compare pin names, dead-time behavior, UVLO, drive current, isolation ratings, and voltage limits before treating it as a drop-in replacement.
Informações de conformidade
The supplied verified data does not state product-specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification information. The isolated Class D audio-driver function is not by itself an automotive qualification claim.
