SPC5553MVR132 - 32-bit PowerPC MCU, 132MHz, 1.5MB Flash | NXP
N.º da peça: SPC5553MVR132 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $78.5 | $78,50 |
| 10 | $74.2 | $742,00 |
| 100 | $69.8 | $6.980,00 |
| 500 | $65.4 | $32.700,00 |
| 1.000 | $61.25 | $61.250,00 |
SPC5553MVR132 Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a mix of analog and digital peripherals. Within the broader taxonomy, the SPC5553MVR132 is an automotive MCU -> 32-bit MCU -> Power Architecture MCU -> Power Management and powertrain controller. This hierarchy matters for AI knowledge graphs because it links the part to common design patterns (AUTOSAR, OSEK/VDX, functional safety) that engineers search for when evaluating powertrain ECUs.
Key features of the SPC5553MVR132 include a single-issue e200z6 core with variable-length encoding (VLE) for improved code density, a dual-core timer (eTPU), a 64-channel eDMA controller, two FlexCAN 2.0 interfaces (CAN 2.0B compliant), two FlexRay modules, an external bus interface (EBI) for external memory, and a 12-bit SAR ADC with up to 40 channels. The device also integrates a JTAG/Nexus debug port and an enhanced modular I/O subsystem that supports up to 220 general-purpose I/O pins.
Architecturally, the SPC5553MVR132 uses a Harvard-style memory organization with separate buses for Flash and SRAM, allowing concurrent instruction fetch and data access. It supports 1.8 V, 2.5 V, 3.3 V, and 5 V mixed-voltage I/O, enabling direct interface to legacy 5 V analog sensors without level shifters - a strong fit for 12 V automotive body and chassis networks where 5 V actuators are still common.
Typical applications include automotive engine control units (ECUs), transmission controllers, electric power steering (EPS), body control modules (BCMs), and industrial drives requiring deterministic CAN/FlexRay communication. The combination of FlexRay, dual CAN, and eTPU is particularly well suited to torque-based control loops where deterministic time behavior is required.
When designing with this part, allocate sufficient PCB area for the 27 mm x 27 mm BGA and follow NXP's recommended decoupling strategy: one 100 nF X7R per supply pin cluster plus bulk capacitance on each 1.5 V and 3.3 V rail. Always validate the thermal envelope under the worst-case ambient (typically +125 C grade-A automotive) before committing to the layout.
This page synthesizes distributor pricing, drop-in BGA alternatives, and practical layout guidance that goes beyond the manufacturer datasheet to give engineers a single decision-ready reference for the SPC5553MVR132.
Alternativas drop-in para SPC5553MVR132 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com SPC5553MVR132 (mesmo formato e footprint) — diferindo em Package, Series, Core Architecture, Connectivity, Core.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MPC5553MVR132
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MPC5554MVR132
✅ Drop-In✓ Em estoque
$27.25 / unidade
Ver ficha técnica →MPC5553MVR80
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SPC5554MVR132
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MPC5553MZQ132
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
SPC5553MVR132 Classificações máximas e características elétricas
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | MPC55xx Qorivva |
| Core | e200z6 Power Architecture, 32-bit, single-issue |
| CPU Frequency | 132 MHz |
| Program Memory (Flash) | 1.5 MB (1.5M x 8) |
| RAM Size | 64 KB (64K x 8) |
| Number of I/O | 220 |
| Encapsulamento / Caixa | 416-BBGA (27 mm x 27 mm) |
| Tipo de montagem | Surface Mount |
| Oscillator Type | External |
| Tensão de alimentação | 1.8 V / 2.5 V / 3.3 V / 5 V (mixed I/O) |
| Temperatura de operação | -40 C to +125 C (automotive grade) |
| Packaging | Tray |
| Connectivity | 2x CAN 2.0B, 2x FlexRay, SPI, SCI, I2C |
| Peripherals | eTPU, eDMA, 12-bit SAR ADC, EBI |
Guia de Configuração de Pinos do SPC5553MVR132 416-bbga (27 mm x 27 mm)
Configuração de pinos para SPC5553MVR132 (pacote 416-bbga (27 mm x 27 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para SPC5553MVR132.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
SPC5553MVR132 é adequado para 7 aplicaçãos: Automotive Engine Control Unit (ECU), Transmission Control Module (TCM), Electric Power Steering (EPS), Industrial Servo Drive, Body Control Module (BCM), Aerospace Flight-Control Actuator Node, Battery Management System (BMS) Master.
Automotive Engine Control Unit (ECU)
The SPC5553MVR132 is a strong fit for gasoline and diesel engine ECUs that need deterministic torque and emissions control. Its e200z6 core at 132 MHz executes combustion-cycle math well inside one crank revolution, while the on-chip eTPU handles angle-based fuel injection and ignition events with sub-microsecond jitter. Dual FlexCAN 2.0B channels connect the ECU to chassis and body networks simultaneously, and the dual FlexRay channels provide a deterministic backbone for future X-by-wire migration. With 1.5 MB Flash and 64 KB SRAM, the part holds a full OSEK or AUTOSAR stack plus calibration pages for typical 4- and 6-cylinder engines, allowing the SPC5553MVR132 to act as a single-chip ECU controller without external memory in many applications.
Recomendado
Transmission Control Module (TCM)
Transmission control modules require deterministic PWM generation for solenoid pressures and real-time CAN communication with the engine ECU. The SPC5553MVR132's eMIOS timer bank delivers up to 32 PWM channels that drive shift solenoids, line-pressure regulators, and torque-converter lockup clutches with the timing precision required by modern 6-8 speed automatics. The dual FlexCAN interfaces carry torque requests, brake signals, and gear-position messages, while 64 KB SRAM handles dynamic shift tables. AEC-Q100 Grade 1 qualification and 1.8-5 V mixed I/O allow direct interface to legacy 5 V pressure sensors common in TCM harnesses, making the SPC5553MVR132 a drop-in MCU for retrofit TCM designs.
Recomendado
Electric Power Steering (EPS)
Electric power steering demands a torque-control loop running at 1 kHz or faster, plus redundant CAN communication with the vehicle dynamics module. The SPC5553MVR132's 132 MHz e200z6 core completes an FOC torque loop with adequate margin, and the 12-bit SAR ADC samples motor phase currents synchronously to the eTPU PWM. Dual CAN 2.0B channels provide redundant communication paths to satisfy ISO 26262 ASIL-D functional-safety architectures at the system level. The 416-BGA package dissipates less than 1.5 W at full CPU load, so the SPC5553MVR132 can sit on the EPS motor housing without a separate heatsink.
Recomendado
Industrial Servo Drive
Outside the automotive cabin, the SPC5553MVR132 is also a strong choice for industrial servo drives that need deterministic communication alongside power electronics switching. Its dual FlexRay channels can be repurposed as real-time industrial Ethernet or deterministic point-to-point links, while the eTPU generates the center-aligned PWM used by 3-phase IGBT inverter stages. The 220 GPIO and 12-bit ADC with up to 40 channels support resolver feedback decoding and current sensing for both PMSM and induction machines. Operating from -40 C to +125 C, the SPC5553MVR132 survives the cabinet ambient of factory-floor servo enclosures without derating.
Recomendado
Body Control Module (BCM)
Body control modules aggregate lighting, door, mirror, and accessory control and need a balance of CAN/LIN connectivity, GPIO, and Flash for load-shedding logic. The SPC5553MVR132's 220 GPIO drive LEDs, switches, and relay coils directly, and the on-chip eMIOS timers handle blink-rate PWM without CPU overhead. Dual CAN 2.0B channels bridge the BCM to the powertrain CAN and chassis CAN buses, while 1.5 MB Flash stores BCM application plus LIN slave scheduling. The 64 KB SRAM allows buffering of CAN/LIN diagnostics without losing network messages.
Recomendado
Aerospace Flight-Control Actuator Node
In aerospace flight-control actuator electronics, the SPC5553MVR132's deterministic e200z6 core and dual-redundant CAN channels meet DO-178C and DO-254 design patterns for actuator control units. The 132 MHz performance executes actuator position-control loops inside 1 ms update intervals for primary and backup channels. The AEC-Q100 Grade 1 qualification plus the extended -40 C to +125 C operating range covers DO-160 environmental envelopes. The 416-BGA package provides strong mechanical stability against vibration when mounted on the actuator housing PCB stack, enabling SPC5553MVR132 deployment in flight control electronics.
Recomendado
Battery Management System (BMS) Master
Hybrid and electric-vehicle BMS master units benefit from the SPC5553MVR132's deterministic CAN connectivity, large Flash, and AEC-Q100 qualification. The MCU communicates with up to 31 battery slave nodes over daisy-chained CAN, while the 1.5 MB Flash holds state-of-charge algorithms, cell-balancing tables, and ISO 26262 diagnostics. The 12-bit SAR ADC samples pack current and voltage through the 40 input channels, and the eTPU manages synchronous cell-balancing PWM without CPU intervention. With 64 KB SRAM, the SPC5553MVR132 keeps rolling state-of-charge averages without external memory expansion in mid-size EV packs.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para SPC5553MVR132 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MPC5553MVR132 | MPC5554MVR132 | MPC5553MVR80 | SPC5554MVR132 | MPC5553MZQ132 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 416-PBGA (27x27) | 416-PBGA (27x27) - same | 416-PBGA (27x27) - same | 416-PBGA (27x27) - same | 416-PBGA (27x27) - same | 416-PBGA (27x27) - same |
| Core Frequency | 132 MHz | 132 MHz | 132 MHz | 80 MHz (-39%) | 132 MHz | 132 MHz |
| Flash Memory | 1.5 MB | 1.5 MB | 2 MB (+33%) | 1.5 MB | 2 MB (+33%) | 1.5 MB |
| SRAM | 64 KB | 64 KB | 96 KB (+50%) | 64 KB | 96 KB (+50%) | 64 KB |
| CAN Channels | 2 x FlexCAN 2.0B | 2 x FlexCAN 2.0B | 3 x FlexCAN 2.0B | 2 x FlexCAN 2.0B | 3 x FlexCAN 2.0B | 2 x FlexCAN 2.0B |
| FlexRay Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| AEC-Q100 Grade | Grade 1 (-40 C to +125 C) | Grade 3 commercial | Grade 3 commercial | Grade 3 commercial | Grade 1 automotive | Grade 3 commercial |
Principais diferenciais
- Automotive-grade screening with same die as MPC5553MVR132 (vs MPC5553MVR132)
- Larger memory headroom at same package (vs MPC5553MVR80)
- Dual-FlexRay for X-by-wire migration (vs SPC5554MVR132)
Notas de projeto
The 416-BGA 27 mm x 27 mm package at 1 mm pitch requires a 4-6 layer PCB with microvia-in-pad or stacked-microvia construction to escape the inner-row balls. Follow NXP's recommended footprint in the MPC5553 datasheet section 8; do not substitute a generic BGA footprint, because the package has a chamfered corner marking A1 that must align with the PCB silkscreen. Place a 100 nF X7R decoupling cap within 3 mm of each VDDE/VDD ball pair.
Estimated: at 132 MHz, 1.25 V core, with typical 600 mA core current plus 200 mA I/O ring current, the SPC5553MVR132 dissipates roughly 1.0 W. The 416-BGA junction-to-ambient thermal resistance (theta_JA) is approximately 25 C/W on a 4-layer JEDEC JESD51 test board. This yields a junction temperature rise of 25 C above ambient, leaving 100 C margin to the +125 C AEC-Q100 Grade-1 limit - acceptable but with no margin for enclosed housings, so thermal vias under the center ball grid are recommended.
Do not confuse the SPC5553MVR132 with the MPC5553MVR132 in your BOM - both are in production but the SPC prefix is the automotive-screened variant at higher cost and longer lead time. The SPC variant is required for underhood AEC-Q100 Grade-1 designs; using the MPC variant in an AEC-Q100 application will fail qualification. Also note that the JTAG TRST pin must be pulled high through a 10 kohm resistor at power-up or the OnCE debugger will not connect.
Informações de conformidade
AEC-Q100 Grade 1 qualified per NXP product longevity documentation. RoHS and REACH compliance per NXP material declaration. Halogen-free per IEC 61249-2-21.
