STM32F072V8H6 - 48MHz Cortex-M0 64KB MCU | STMicroelectronics
N.º da peça: STM32F072V8H6 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.5113 | $3,51 |
| 10 | $3.5113 | $35,11 |
| 100 | $3.5113 | $351,13 |
| 500 | $3.5113 | $1.755,65 |
| 1.000 | $3.5113 | $3.511,30 |
| 2.496 | $2.30901 | $5.763,29 |
STM32F072V8H6 Visão geral
A microcontroller is a semiconductor device that integrates a processor core, Flash program memory, SRAM, peripherals, and interface controllers into one component. In the hierarchy of semiconductor components, an MCU sits below embedded processor and general-purpose controller categories and above application-specific control devices. The STM32F072V8H6 is therefore positioned between simple fixed-function controllers and higher-performance microprocessors, providing a programmable platform for control loops, communications, and peripheral coordination.
Key verified characteristics include the ARM Cortex-M0 core, 32-bit architecture, 48 MHz maximum operating frequency, 64 KB Flash memory, and 100-UFBGA packaging. The product listing also identifies USB, CAN, and an embedded-control-oriented STM32F0 platform. These features make the MCU appropriate for USB-connected peripherals, CAN nodes, industrial interfaces, and compact control products. Compared with a discrete controller, the integrated MCU reduces the number of external components required for processing, firmware storage, communication, and control.
The 100-UFBGA package is a compact surface-mount ball-grid package. Ball-grid construction supports dense PCB routing when the board area is constrained, but assembly and inspection require processes suitable for fine-pitch BGA packages. The 7 x 7 mm package should be laid out according to STMicroelectronics land-pattern and assembly guidance rather than treated as a generic QFN footprint. Exact electrical limits, pin names, memory sizes beyond the verified Flash figure, and peripheral details should be confirmed in the manufacturer datasheet.
Typical applications include USB peripherals, CAN communication endpoints, industrial automation modules, compact motor-control boards, and low-cost USB power or data products. In each case, the 48 MHz Cortex-M0 core provides the processing baseline for real-time control, while USB and CAN connectivity reduce the need for external interface components. The 64 KB Flash capacity is most appropriate for firmware that requires moderate code density and local storage rather than large application images.
Designers should verify the exact package pinout, exposed-ball assignments, power requirements, clock configuration, decoupling, and programming interface against the official STM32F072x8/xB datasheet. BGA assembly should include adequate thermal and electrical design checks. This page consolidates the verified manufacturer and distributor descriptions, package information, pricing references, cross-reference results, and engineering guidance while clearly identifying information that was not supplied by the source data.
Alternativas drop-in para STM32F072V8H6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32F072V8H6 (mesmo formato e footprint) — diferindo em Architecture, Core, Flash Memory, Package, Product Type.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM32F072V8T6
✅ Drop-In✓ Em estoque
$2.7757 / unidade
Ver ficha técnica →STM32F072V8H7XXX
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32F072V8H6 Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Architecture | ARM Cortex-M0 RISC |
| Maximum Operating Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Encapsulamento | 100-UFBGA (7 x 7 mm) |
| Core | 32-bit ARM Cortex-M0 |
| Product Family | STM32F072x8/xB |
| USB Connectivity | USB |
| CAN Connectivity | CAN |
| Tipo de montagem | Surface Mount |
| Package Type | UFBGA |
| Package Dimensions | 7 x 7 mm |
| Supply Classification | Mainstream Arm Cortex-M0 USB line MCU |
| Program Memory Organization | 64K x 8 |
| Manufacturer | STMicroelectronics |
Guia de Configuração de Pinos do STM32F072V8H6 7 x 7 mm
Configuração de pinos para STM32F072V8H6 (pacote 7 x 7 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32F072V8H6.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32F072V8H6 é adequado para 6 aplicaçãos: USB Peripheral Controller, CAN Network Node, Industrial Automation Module, USB Data Acquisition Device, Compact Motor-Control Board, Compact Embedded Control Platform.
USB Peripheral Controller
The STM32F072V8H6 is a suitable candidate for a compact USB peripheral because the verified Mouser listing identifies USB connectivity, a 48 MHz ARM Cortex-M0 core, and 64 KB of Flash. The MCU can coordinate device enumeration, control transfers, data buffering, status reporting, and application-specific control logic without requiring a separate processor. Its 100-UFBGA 7 x 7 mm package helps reduce board area, but the board still needs the correct USB data path, protection, power architecture, and connector implementation. The 64 KB Flash limit should be checked against the complete firmware image, bootloader, and future updates. USB electrical limits, transceiver requirements, and package-specific routing must be confirmed in the official STMicroelectronics documentation.
Recomendado
CAN Network Node
The STM32F072V8H6 fits compact CAN node designs that need a real-time control MCU with integrated communication. The verified device description identifies CAN connectivity and a 48 MHz Cortex-M0 core, allowing firmware to handle message handling, application control, diagnostics, and local I/O in one component. This can simplify a node compared with a discrete MCU-plus-CAN arrangement. The design must still account for bus transceiver selection, termination, protection, isolation requirements, timing, and fault behavior. The supplied information does not specify the complete peripheral set, transceiver interface details, or environmental rating, so those parameters should be verified before deployment.
Recomendado
Industrial Automation Module
STM32F072V8H6 is appropriate for compact industrial automation modules where USB or CAN connectivity and moderate firmware capacity are useful. Its 48 MHz Cortex-M0 core can execute control tasks, state-machine logic, communications, and supervisory functions, while 64 KB Flash provides local firmware storage for a focused application. The 7 x 7 mm 100-UFBGA package can help fit the MCU into a dense controller assembly, provided the PCB uses a qualified BGA assembly process. Industrial suitability should not be inferred from the product family alone: verify operating temperature, supply tolerance, EMC, isolation, protection, and lifecycle commitments against the complete system requirements.
Recomendado
USB Data Acquisition Device
The STM32F072V8H6 can serve as the control platform for a compact USB-connected data-acquisition product when the application code fits within 64 KB Flash and the MCU peripherals meet the measurement requirements. The 48 MHz Cortex-M0 core can coordinate sensor configuration, buffering, command handling, and USB transfers, reducing the need for a separate controller. The package also permits a compact board footprint, but analog signal conditioning, sensor excitation, isolation, and data-integrity requirements remain external design concerns. Verify the exact ADC and timer resources, analog limits, USB requirements, and pin assignments in the manufacturer documentation; those specifications were not included in the supplied data.
Recomendado
Compact Motor-Control Board
The STM32F072V8H6 may be evaluated for compact motor-control boards that require USB or CAN monitoring and a moderate amount of embedded firmware. The 48 MHz core provides a clear real-time control baseline, and the integrated communications features can support configuration, diagnostics, and supervisory control. The MCU is not automatically a complete motor driver: power-stage devices, gate drivers, current sensing, protection, and thermal design must be added according to the motor and supply requirements. Because the verified data does not identify timer channels, PWM outputs, comparator resources, ADC performance, or temperature limits, engineers must check those details before selecting it for safety-critical or production motor systems.
Recomendado
Compact Embedded Control Platform
The STM32F072V8H6 is a strong candidate for a compact embedded-control platform requiring a 32-bit MCU, USB or CAN connectivity, and local Flash. Its 48 MHz Cortex-M0 core can support responsive control loops, communications, and supervisory logic without the complexity of a higher-end processor. The 64 KB Flash organization should be treated as a design boundary: code size, bootloader, diagnostics, and future updates must be budgeted during architecture planning. The 100-UFBGA package reduces footprint but increases assembly and inspection requirements. Before committing to production, confirm SRAM, GPIO availability, clocking, power rails, peripheral assignment, and package-specific design guidance from the official STM32F072x8/xB documentation.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32F072V8H6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32F072V8T6 | STM32F072V8H7XXX |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB (64K x 8) | 64 KB | 64 KB |
| USB Connectivity | USB | USB | USB |
| CAN Connectivity | CAN | CAN | CAN |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC |
Principais diferenciais
- Integrated connectivity in a compact package (vs STM32F072V8T6)
- Mainstream STM32F0 positioning (vs STM32F072V8H7XXX)
- Code-density-oriented configuration (vs STM32F030RCT6TR)
Notas de projeto
Use the official STMicroelectronics STM32F072x8/xB package drawing for the 100-UFBGA land pattern, including ball pitch, pad design, solder-mask clearance, and paste apertures. Do not substitute a generic BGA footprint solely because both parts have 100 balls. The supplied web data confirms the 7 x 7 mm UFBGA package but does not provide ball dimensions, so the missing package geometry must be taken directly from the manufacturer documentation.
Plan the power rails and decoupling around the exact STM32F072V8H6 electrical requirements in the manufacturer datasheet. The verified source data confirms a 48 MHz Cortex-M0 MCU but does not provide the operating voltage range, absolute maximum ratings, or supply-current limits. Those values must control regulator selection, bulk-capacitor sizing, power sequencing, and worst-case brownout analysis; no substitute values should be assumed.
Reserve routing and component-placement space for the device's USB and CAN functions only after confirming the exact pin assignments and alternate-function requirements in the datasheet. USB traces need controlled topology, impedance management, return-path continuity, and protection planning; CAN requires a suitable transceiver, termination strategy, and fault protection. The supplied sources identify USB and CAN capability but do not provide a complete pin map or board-level electrical specification.
Do not treat STM32F072V8, STM32F072V8T6, and STM32F072V8H6 suffix changes as automatically interchangeable. Verify ordering information, temperature grade, package ballout, electrical limits, and firmware identifiers before substitution. Also verify that the 64 KB Flash budget includes bootloader, diagnostics, application code, and future updates; the verified data does not include SRAM or peripheral details.
Informações de conformidade
The supplied web data does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for STM32F072V8H6. Obtain current compliance documentation from STMicroelectronics or the authorized distributor.
