STM32G081KBU6 - 64MHz Cortex-M0+ MCU, 128KB Flash | STMicroelectronics
N.º da peça: STM32G081KBU6 ✓ AtivoSTM32G081KBU6 Visão geral
A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, and analog interfaces onto one device. The STM32G0 series is positioned within the hierarchy of embedded processors, ARM Cortex microcontrollers, 32-bit RISC microcontrollers, and general-purpose MCU devices. Its Cortex-M0+ architecture supports efficient event-driven control while providing enough performance for connected sensors, compact industrial equipment, and low-power consumer products.
The STM32G081KBU6 provides 128 KB of Flash for firmware, 36 KB of SRAM for working memory, and communication and security-oriented features including AES encryption, a random number generator, and multiple serial interfaces. Its 1.7 V to 3.6 V operating range allows use with common low-voltage rails, while the 64-pin-equivalent density of its 32-lead package helps reduce board area in space-constrained equipment.
The Cortex-M0+ core uses a 32-bit RISC architecture and includes hardware features suited to security-oriented embedded designs. The STM32G081KBU6 combines these capabilities with AES acceleration, a random number generator, and memory-protection options. This makes the device useful where deterministic control must coexist with encrypted communication, secure firmware updates, or randomized security operations.
Typical applications include connected sensor nodes, compact industrial controllers, access-control terminals, energy-monitoring equipment, USB-connected peripherals, and consumer devices requiring a low-power 32-bit control platform. The small UFQFPN package also supports designs where reduced footprint and a high pin density are important design objectives.
PCB implementation should follow the manufacturer pinout and land-pattern guidance, with particular attention to exposed-pad thermal management, supply decoupling, and boot configuration. Keep the 3.6 V maximum operating voltage as a firm design constraint, provide suitable local capacitance at the power pins, and confirm that the selected board layout preserves the intended debug, programming, and peripheral functions.
This product page combines manufacturer device information, technical specifications, application guidance, and same-package replacement analysis. It is intended to help engineers evaluate the STM32G081KBU6, verify firmware and hardware constraints, and identify candidates for a second-source review before committing a design to production.
Alternativas drop-in para STM32G081KBU6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32G081KBU6 (mesmo formato e footprint) — diferindo em Flash Memory, Package, Product Type, Architecture, Core Architecture.
STM32G071KBU6
✅ Drop-InConsulte o preço
Ver ficha técnica →STM32G071KBU6N
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32G071KBT6
✅ Drop-InConsulte o preço
Ver ficha técnica →STM32G081KBT6
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →STM32G0B1KBU6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32G081KBU6 Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 64 MHz |
| Core Architecture | ARM Cortex-M0+ |
| Flash Memory | 128 KB |
| SRAM | 36 KB |
| SRAM with Hardware Parity Check | 32 KB |
| Operating Voltage Range | 1.7 V to 3.6 V |
| Encapsulamento | 32-UFQFPN (5 x 5 mm) |
| Contagem de pinos | 32 pins |
| Tipo de montagem | Surface mount |
| Faixa de temperatura de operação | -40 °C to +85 °C |
| Cryptographic Accelerator | AES |
| Random Number Generator | Yes |
| Flash Memory Protection | Yes |
| Securable Memory Area | Yes |
| Largura do barramento de dados | 32-bit |
| Programmable Peripheral Interfaces | I2C and SPI interfaces |
Guia de Configuração de Pinos do STM32G081KBU6 32-ufqfpn (5 x 5 mm)
Configuração de pinos para STM32G081KBU6 (pacote 32-ufqfpn (5 x 5 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32G081KBU6.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32G081KBU6 é adequado para 6 aplicaçãos: Connected Sensor Nodes, Secure Access-Control Terminals, USB-Conditioned Peripherals, Compact Industrial Control Modules, Energy-Monitoring Equipment, Consumer and Appliance Controllers.
Connected Sensor Nodes
The STM32G081KBU6 fits connected sensor nodes that need compact processing, protected firmware, and security-oriented peripherals without a large package. Its 64 MHz Cortex-M0+ core can service sensor acquisition, local filtering, and protocol handling, while 128 KB of protected Flash stores application code and 36 KB of SRAM supports working buffers. The 1.7 V to 3.6 V range accommodates low-voltage sensor rails. Placing the 32-pin UFQFPN device beside the sensor can reduce board size, although the design must include local supply decoupling and follow the manufacturer land pattern.
Recomendado
Secure Access-Control Terminals
The STM32G081KBU6 is suitable for compact access-control terminals that combine credential handling, local decision logic, and serial communications. Its specified AES hardware accelerates cryptographic operations, while the random number generator supports security-sensitive random-data requirements. The 64 MHz Cortex-M0+ core is sufficient for keypad, display, reader, and communication tasks, and protected Flash with a securable area helps organize firmware. Its 32-pin 5 x 5 mm UFQFPN package preserves board area, but the exposed pad and supply pins still require careful layout for reliable operation.
Recomendado
USB-Conditioned Peripherals
The STM32G081KBU6 can support small USB-oriented peripheral designs where a 64 MHz control core, 128 KB program memory, and 36 KB SRAM are required. The 1.7 V to 3.6 V supply range is appropriate for compact embedded systems using regulated low-voltage rails. Its 32-pin UFQFPN footprint supports dense layouts, and protected Flash can support controlled firmware updates. Board-level implementation must check the exact peripheral assignments, USB electrical requirements, clock source, decoupling, and exposed-pad land pattern rather than assuming every signal function is interchangeable.
Recomendado
Compact Industrial Control Modules
The STM32G081KBU6 suits compact industrial control modules that perform deterministic logic, condition monitoring, and local communications within a constrained enclosure. The 64 MHz Cortex-M0+ core provides useful control headroom, while 128 KB of protected Flash and 36 KB of SRAM support embedded firmware, diagnostics, and communication buffers. Its 32-pin UFQFPN package reduces board footprint, and the 1.7 V to 3.6 V operating range supports low-voltage industrial subsystems. Temperature-grade qualification, isolation boundaries, ESD protection, and the complete peripheral set must be verified for each product environment.
Recomendado
Energy-Monitoring Equipment
The STM32G081KBU6 is appropriate for energy-monitoring equipment that combines measurement capture, local calculations, and secure data handling in a compact assembly. The 64 MHz Cortex-M0+ core can process sampled data, manage thresholds, and prepare communication packets, while the 128 KB protected Flash accommodates firmware and the 36 KB SRAM supports acquisition and buffering. Its 1.7 V to 3.6 V operating range can fit low-energy sensor systems. Analog front-end accuracy, measurement timing, watchdog behavior, and low-power modes must be evaluated separately from the MCU specifications.
Recomendado
Consumer and Appliance Controllers
The STM32G081KBU6 can serve as the main controller in compact consumer products and appliances that need responsive control, local storage, and secure communications. The 64 MHz Cortex-M0+ core handles button input, motor or actuator sequencing, display updates, and communication tasks, while 128 KB of Flash and 36 KB of SRAM provide adequate memory for typical embedded applications. The compact 32-pin UFQFPN package assists product miniaturization. Firmware must include the appropriate low-power strategy, watchdog configuration, brownout handling, and peripheral-specific safeguards.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32G081KBU6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32G071KBU6 | STM32G071KBU6N | STM32G071KBT6 | STM32G081KBT6 | STM32G0B1KBU6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 32-UFQFPN (5 x 5 mm) | 32-UFQFPN (5 x 5 mm) | 32-UFQFPN (5 x 5 mm) | 32-UFQFPN (5 x 5 mm) | 32-UFQFPN (5 x 5 mm) | 32-UFQFPN (5 x 5 mm) |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz | 64 MHz |
Principais diferenciais
- Security-oriented hardware in a compact Cortex-M0+ platform (vs STM32G071KBU6)
- Closest same-family ordering alternative (vs STM32G081KBT6)
- Protected firmware organization (vs STM32G0B1KBU6)
- Low-voltage compact package (vs STM32G071KBU6N)
Notas de projeto
Use the manufacturer UFQFPN land pattern and pin-description table rather than a generic 32-pin QFN drawing. Keep the exposed-pad connection and ground strategy consistent with the package drawing, place input and output decoupling capacitors close to their assigned supply pins, and avoid routing fast or sensitive signals beneath the device where practical. Confirm pin 1 orientation mechanically against the PCB footprint, especially on small assemblies where package orientation errors are costly.
Design the STM32G081KBU6 supply for the documented 1.7 V to 3.6 V operating range. Check every attached peripheral for signal-level compatibility at the minimum and maximum rail conditions, and do not allow transients above the device maximum. Use local bulk and high-frequency decoupling according to the manufacturer power-supply recommendations, and account for startup current when validating brownout behavior and the operating voltage of downstream loads.
Although the STM32G081KBU6 is a low-power microcontroller, total junction temperature depends on ambient temperature, internal activity, supply voltage, clock rate, and package heat spreading. Provide uninterrupted ground-copper access to the exposed pad and minimize thermal interruption in inner layers. For elevated-temperature products, validate the final assembly with the intended clock, peripheral load, enclosure, and PCB stack-up rather than relying only on the nominal 64 MHz operating point.
A matching footprint does not by itself prove that an alternative is a functional replacement. Review boot configuration, debug access, oscillator connections, communication peripherals, pin multiplexing, interrupt assignments, memory size, voltage limits, and temperature grade. Firmware should be retested with the exact candidate MPN because peripheral availability and initialization requirements can differ even when the Cortex-M0+ core, 64 MHz rating, 128 KB Flash, and package are unchanged.
Separate sensitive analog or communication paths from switching nodes and high-current outputs, and keep the crystal or external clock loop short if either is used. Route decoupling current through a compact path to the device pins, maintain a continuous ground reference, and observe the ordering recommendations for signal pins around the package. The small 5 x 5 mm footprint can create assembly constraints, so verify courtyard clearance, stencil apertures, and the exposed-pad soldering process during PCB qualification.
Informações de conformidade
No explicit compliance declaration was identified for this exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with STMicroelectronics before environmental qualification.