STM32G473VEH6TR - 170MHz Cortex-M4 MCU | STMicroelectronics
N.º da peça: STM32G473VEH6TR ✓ AtivoSTM32G473VEH6TR Visão geral
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one device. The STM32G473 belongs to the STM32G4 family, where the Arm Cortex-M4 core provides deterministic real-time processing. In the power-management and semiconductor hierarchy, this MCU integrates digital control, analog measurement, communications, and programmable I/O within a single surface-mount device.
Key features include a 32-bit Cortex-M4 processor with a maximum clock frequency of 170 MHz, 512 KB of program flash, and an integrated math accelerator for higher-throughput arithmetic operations. The device is positioned for applications requiring substantial analog and digital resources without moving to a larger Cortex-M7 or Cortex-M33 design. Its 100-TFBGA package also supports compact, high-density PCB layouts where fine-pitch routing and careful ground-plane design are necessary.
The STM32G4 architecture is designed for applications that combine real-time control with advanced analog peripherals. Because the device is specified for 1.71 V to 3.6 V operation, it can be integrated into industrial 3.3 V systems while retaining headroom for lower-voltage rails. Exact RAM capacity, converter performance, I/O counts, and peripheral configurations should be confirmed in the manufacturer pinout, electrical characteristics, and reference manual before final PCB release.
Typical uses include industrial sensor controllers, motor-control and power-conversion equipment, communications interfaces, medical instrumentation, and compact embedded platforms. The math accelerator can improve selected numerical operations, while the analog-oriented feature set helps reduce the need for separate signal-conditioning or conversion components. Firmware development can be supported by the STM32 ecosystem and Arm Cortex-M tooling, subject to the peripheral configuration and memory map required by the application.
Design should begin with the manufacturer pin-definition table and package land pattern. A 100-ball, 8 mm by 8 mm TFBGA requires short escape routing, uninterrupted return paths, and careful decoupling around every supply ball. Confirm boot configuration, oscillator connections, debug access, reset behavior, and exposed-pin requirements before schematic capture and layout release.
This product page combines the manufacturer device identification, distributor catalog parameters, package constraints, drop-in candidate screening, and application-specific engineering guidance. It also identifies the package, programming, sourcing, and replacement considerations that are essential when moving from component selection into a production embedded design.
Alternativas drop-in para STM32G473VEH6TR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32G473VEH6TR (mesmo formato e footprint) — diferindo em Flash Memory, Math Accelerator, Package, Flash Organization, ADC Resolution.
STM32G474VBT3TR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32G473VEH6
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STM32G473VBH3
✅ Drop-InConsulte o preço
Ver ficha técnica →STM32G473VET6
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →STM32G473VBT6
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →STM32G473VEH6TR Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Series | STM32G4 |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 170 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Math Accelerator | Present |
| Analog Feature Class | High analog capability |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Encapsulamento | 100-TFBGA, 8 mm x 8 mm |
| Package Type | TFBGA |
| Ball Count | 100 balls |
| Tipo de montagem | Surface mount |
| Programmable | Yes |
Guia de Configuração de Pinos do STM32G473VEH6TR tfbga
Configuração de pinos para STM32G473VEH6TR (pacote tfbga). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32G473VEH6TR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32G473VEH6TR é adequado para 6 aplicaçãos: Industrial Motor Controllers, Industrial Sensor and Condition Monitoring, Digital Power Conversion Control, Communications and Protocol Gateways, Medical and Laboratory Instruments, Consumer and IoT Control Products.
Industrial Motor Controllers
The STM32G473VEH6TR fits industrial motor-control systems that require deterministic real-time computation, PWM-oriented control, and substantial analog capability. Its 170 MHz Arm Cortex-M4 core gives designers more processing headroom for current-loop algorithms, digital filtering, diagnostics, and communication tasks than a simpler microcontroller. The integrated math accelerator can support selected numerical operations without assigning every calculation to the CPU. Use the device in a 1.71 V to 3.6 V system and place decoupling close to the supply balls. The 100-TFBGA footprint saves board area but requires careful escape routing, continuous ground planes, and validation of timer outputs, ADC connections, and protection circuitry.
Recomendado
Industrial Sensor and Condition Monitoring
The STM32G473VEH6TR is appropriate for sensor hubs and condition-monitoring equipment that combine analog measurement with digital signal processing. The 170 MHz Cortex-M4 core can process sampled vibration, temperature, pressure, or current signals while the STM32G4 family's high analog capability reduces the amount of external signal-conditioning hardware. Its 512 KB of flash provides room for application firmware, calibration tables, and communication protocols. In a deployed system, use the device beside precision sensors and low-noise analog front ends, then maintain short analog traces and isolate sensitive inputs from switching nodes. The dense 100-TFBGA package supports compact instruments, although power, reference, and sensor-ground routing require careful partitioning.
Recomendado
Digital Power Conversion Control
The STM32G473VEH6TR can serve as the supervisory controller in digitally controlled power converters because its 170 MHz Cortex-M4 performance supports fast loop execution, while the high analog feature set supports feedback acquisition and protection functions. The 512 KB flash capacity is useful for control tables, compensation parameters, telemetry, and communication firmware. Place the MCU close to the feedback network while keeping switching-node copper away from analog and ground-reference paths. Confirm the selected ADC, timer, comparator, and digital power-control peripherals against the exact STM32G473VEH6TR configuration. The compact 100-TFBGA package assists high-density power modules, but thermal design must account for the controller, analog circuitry, and nearby switching components.
Recomendado
Communications and Protocol Gateways
The STM32G473VEH6TR is suitable for compact communications gateways that need a high-speed control processor plus flexible serial peripherals. Its 170 MHz Cortex-M4 core can handle protocol translation, buffering, supervisory logic, and multiple communication tasks while the 512 KB flash stores firmware and protocol tables. The target's high analog orientation also allows the gateway to supervise supply rails or monitor line conditions. Pair the MCU with the required Ethernet, CAN, serial, or wireless interface circuits and confirm every assigned peripheral against the device pinout. The 100-TFBGA package reduces PCB area, but high-speed interface routing demands uninterrupted references, controlled impedance, and close placement of interface-support components.
Recomendado
Medical and Laboratory Instruments
The STM32G473VEH6TR can support compact medical or laboratory instruments that combine acquisition, control, and human-interface electronics. The 170 MHz Cortex-M4 core provides responsive real-time handling, and the STM32G4 family's analog capabilities are useful for sensor signals and supervisory functions. Its 512 KB flash can hold instrument firmware, calibration metadata, and diagnostic routines. In a medical-oriented product, verify electrical isolation, leakage, safety, and qualification requirements independently of the MCU's general-purpose status. Keep analog inputs away from digital switching activity, use clean references, and follow the manufacturer's decoupling and layout recommendations. The 100-TFBGA footprint supports compact assemblies but requires high-density manufacturing capability.
Recomendado
Consumer and IoT Control Products
The STM32G473VEH6TR fits connected products that need more processing and analog capability than a basic microcontroller while retaining compact dimensions. The 170 MHz Arm Cortex-M4 core supports application logic, protocol handling, and user-interface updates, while 512 KB of flash accommodates firmware and local data. Its high analog feature set can supervise sensors, LEDs, power conditions, or touch-related functions. A typical implementation places the MCU between a wireless module, local sensors, and an actuator driver, with separate routing for analog and radio-sensitive circuits. Because the package is a 100-ball TFBGA, power delivery, via-in-pad considerations, and assembly capability should be reviewed early. The MCU itself remains a compact embedded controller within a broader IoT product.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32G473VEH6TR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32G474VBT3TR | STM32G473VEH6 | STM32G473VBH3 | STM32G473VET6 | STM32G473VBT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) | 100-TFBGA (8x8 mm) |
| Processor Core | Arm Cortex-M4, 32-bit RISC | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz |
| Product Series | STM32G4 | STM32G4 | STM32G4 | STM32G4 | STM32G4 | STM32G4 |
Principais diferenciais
- High-density integration without sacrificing the Cortex-M4 performance class (vs STM32G474VBT3TR)
- Substantial embedded flash for firmware, configuration, and control tables (vs STM32G473VBH3)
- Analog-oriented STM32G4 positioning for mixed-signal control (vs STM32G473VET6)
- Space-efficient 8 mm by 8 mm package for high-density embedded products (vs STM32G473VBT6)
Notas de projeto
Use the exact 100-ball TFBGA land pattern from the manufacturer package drawing and place every decoupling capacitor directly beside its associated supply ball. Maintain uninterrupted ground references beneath and between the signal escapes. Because this is an 8 mm by 8 mm fine-pitch BGA, confirm board-layer count, via-in-pad policy, solder-mask definition, and assembly capability before releasing artwork.
Separate analog inputs, voltage references, and oscillator components from digital clocks, high-speed interfaces, and switching-power circuits. Route sensitive signals over continuous ground, keep their return paths short, and place analog filtering close to the source. Review the manufacturer pin table for analog-supply and ground-ball requirements; sharing a generic ground strategy with digital signals can degrade measurement accuracy.
Estimated: the MCU's input-power budget equals supply voltage multiplied by the maximum operating current. Add the current required by analog peripherals, communications, external memory, and debug loads, then compare the total with the regulator's capacity. Apply a design margin for temperature and tolerance, and place bulk energy storage near the regulator while keeping high-frequency decoupling close to the device.
Do not assume that every STM32G4 order code is automatically firmware- and pin-compatible. Compare the exact ball table, power architecture, peripheral assignment, clock tree, memory configuration, option bytes, and qualification markings before substitution. A shared 100-TFBGA footprint is necessary but not sufficient: a PCB may still require component changes if a candidate uses different analog pins, supply connections, or debug functions.
Informações de conformidade
Compliance status has not been established for the exact STM32G473VEH6TR ordering code and must be confirmed through STMicroelectronics material-compliance documentation.