STMicroelectronics

STM32L422CBT6 - 80MHz Cortex-M4 MCU with 128KB Flash | STMicroelectronics

N.º da peça: STM32L422CBT6 ✓ Ativo
1.71 V to 3.6 V Vdss 48-LQFP (7 mm x 7 mm) Package 80 MHz Speed 128 KB Memory
MOQ: 1 |

STM32L422CBT6 Visão geral

The STMicroelectronics STM32L422CBT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller with an FPU, operating at up to 80 MHz. It integrates 128 KB of Flash memory, 40 KB of SRAM, and USB connectivity in a 48-LQFP package measuring 7 mm by 7 mm. The STM32L422CBT6 combines real-time processing performance with low-power operation for compact embedded systems.

An ultra-low-power microcontroller is an integrated semiconductor designed to execute firmware while minimizing energy consumption during active processing, sleep, and standby modes. The STM32L4 family belongs to the hierarchy of 32-bit RISC microcontrollers, embedded processors, and general-purpose system-on-chip devices. These controllers combine a processor core, embedded nonvolatile memory, volatile RAM, peripherals, clock circuitry, and communication interfaces on one device.

Key features include an Arm Cortex-M4 processor with FPU, 80 MHz maximum clock frequency, 128 KB of embedded Flash, and 40 KB of SRAM. The integrated USB interface supports connected peripheral and control applications without requiring a separate USB controller. The 48-LQFP 7 mm by 7 mm package exposes enough I/O for sensors, communications, human-interface inputs, and external memory while remaining compatible with established leaded PCB assembly methods.

The Cortex-M4 architecture provides single-precision floating-point acceleration alongside 32-bit integer instructions. This benefits control loops, digital filtering, sensor scaling, and motor-control calculations without requiring a separate accelerator. Internal SRAM supports working data, stack operations, communication buffers, and time-critical routines, while the 128 KB Flash region stores firmware and configuration information.

Typical applications include USB-connected industrial controls, compact sensor nodes, wearable and portable products, building automation modules, and low-power monitoring equipment. The device is particularly suitable when a design needs USB connectivity, deterministic real-time performance, and a moderate embedded memory footprint in a 48-pin package.

When designing around the STM32L422CBT6, follow the manufacturer pin-description table before assigning board nets and preserve the recommended power, decoupling, clock, and USB-routing layouts. Component values for crystal, bypass capacitors, USB impedance, and optional transceiver support should be selected from the device's reference design and datasheet rather than generalized MCU values.

This product record combines the exact manufacturer and distributor part identity, package and memory details, application guidance, replacement analysis, and PCB-focused engineering notes to support faster component selection and board-level implementation.

Alternativas drop-in para STM32L422CBT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM32L422CBT6 (mesmo formato e footprint) — diferindo em Package, Flash Organization, Pin Count, Processor Core, Product Type.

STMicroelectronics
Package: 48-LQFP, 7 x 7 mm
Processor Core: Arm Cortex-M4 32-bit RISC
Product Type: Ultra-low-power 32-bit microcontroller
Comparar com STM32L422CBT6 →
STMicroelectronics
Package: 48-UFQFPN (7x7 mm)
Comparar com STM32L422CBT6 →
STMicroelectronics
Package: 32-LQFP, 7 mm x 7 mm
Flash Organization: 128K x 8
Pin Count: 32 pins
Comparar com STM32L422CBT6 →

STM32L421CBT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-LQFP (7 mm x 7 mm)
CPU frequency differs by 0%, Flash capacity by 0%, and SRAM capacity by 0%; the peripheral feature mix differs and must be checked against used board functions.

📋 Alternativa de referência (fora do catálogo)

STM32L422CCT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-LQFP (7 mm x 7 mm)
CPU frequency differs by 0%, SRAM capacity by 0%, and Flash capacity by 100% because this variant provides 256 KB rather than 128 KB.

📋 Alternativa de referência (fora do catálogo)

STM32L432CBT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-LQFP (7 mm x 7 mm)
CPU frequency differs by 0% and Flash capacity by 0%, while SRAM is 64 KB versus 40 KB, a 60% increase; peripheral assignments must still be verified.

📋 Alternativa de referência (fora do catálogo)

STM32L433CBT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-LQFP (7 mm x 7 mm)
CPU frequency differs by 0% and Flash capacity by 0%, while SRAM is 64 KB versus 40 KB, a 60% increase; feature compatibility requires pin-by-pin review.

📋 Alternativa de referência (fora do catálogo)

STM32L452CBT6

✅ Drop-In ⚠️ Especificações não verificadas
📦 48-LQFP (7 mm x 7 mm)
CPU frequency differs by 0%, Flash capacity increases by 100% to 256 KB, and SRAM increases by 220% to 128 KB; the larger memories change firmware and power characteristics.

📋 Alternativa de referência (fora do catálogo)

STM32L422CBT6 Classificações máximas e características elétricas

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M4 with FPU
Instruction Set 32-bit ARM RISC
Maximum CPU Frequency 80 MHz
Flash Memory 128 KB
Flash Organization 128K x 8 bits
SRAM 40 KB
Tensão de alimentação de operação 1.71 V to 3.6 V
USB Interface Present
Encapsulamento 48-LQFP (7 mm x 7 mm)
Contagem de pinos 48 pins
Tipo de montagem Surface mount
Floating-Point Unit Single-precision FPU
Product Series STM32L4 series
Device Family STM32L422xx
Status RoHS Compliant

Guia de Configuração de Pinos do STM32L422CBT6 48-lqfp (7 mm x 7 mm)

Configuração de pinos para STM32L422CBT6 (pacote 48-lqfp (7 mm x 7 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 48-lqfp (7 mm x 7 mm) para STM32L422CBT6

Nenhum dado detalhado de pinagem disponível para STM32L422CBT6.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM32L422CBT6 é adequado para 6 aplicaçãos: USB Industrial Control Modules, Battery-Powered Sensor Nodes, Wearable Health and Activity Devices, Building Automation and HVAC, Precision Data Acquisition, Motor and Feedback Control.

🏭

USB Industrial Control Modules

The STM32L422CBT6 fits compact USB industrial-control modules because it combines an Arm Cortex-M4 core operating at up to 80 MHz with a 128 KB Flash and 40 KB SRAM. Its integrated USB interface can connect the controller to a host while the MCU executes control logic, monitors inputs, and manages actuator outputs. The 48-LQFP package provides a practical balance between I/O capacity and assembly simplicity. A designer should use the manufacturer reference layout for USB signal routing, supply decoupling, clock configuration, and firmware initialization, while confirming that the selected USB connector and protection components match the device's electrical requirements.

🧩

Battery-Powered Sensor Nodes

The STM32L422CBT6 is appropriate for battery-powered sensor nodes that periodically acquire and process measurements. Its low-power STM32L4 architecture can remain inactive between events, while the 80 MHz Cortex-M4 processor provides enough performance for local filtering, scaling, threshold evaluation, and data formatting. The 128 KB of embedded Flash supports a substantial firmware image, and the 40 KB SRAM accommodates working buffers without external memory in many designs. Battery-life estimates should be based on the actual sensor duty cycle, MCU low-power mode, peripheral activity, regulator efficiency, and leakage rather than CPU frequency alone.

📱

Wearable Health and Activity Devices

The STM32L422CBT6 can serve as the central controller in a compact wearable health or activity device because it combines low-power operation with a 40 KB SRAM and an Arm Cortex-M4 FPU. The processor can execute motion-filtering arithmetic, sensor fusion, event detection, and communication framing without a separate real-time processor. Its 1.71 V to 3.6 V operating range supports battery-regulated power designs when the regulator and peripheral rails meet device limits. Mechanical size, current consumption, antenna behavior, and regulatory requirements for the finished product may influence the final architecture, so bench-current profiling is essential during development.

🏭

Building Automation and HVAC

The STM32L422CBT6 fits building-automation and HVAC control boards that coordinate sensors, relays, valves, displays, and field-bus peripherals. Its 80 MHz Cortex-M4 core can execute deterministic control loops, while the FPU supports calculations used in temperature compensation, flow estimation, and filter processing. The 48-LQFP package offers enough pins for multiple digital inputs, outputs, and communication interfaces, and the 40 KB SRAM supports protocol buffers and task state. Firmware should include watchdog handling, safe output states, brownout behavior, and communication recovery to prevent unsafe equipment states during faults or power interruptions.

📟

Precision Data Acquisition

The STM32L422CBT6 is well suited to compact data-acquisition systems that need deterministic sampling, local processing, and USB export. The Cortex-M4 FPU accelerates filtering and calibration arithmetic at up to 80 MHz, while 128 KB of Flash holds application firmware and 40 KB of SRAM provides data and stack space. Engineers should select analog front-end components with suitable input ranges, bandwidth, noise, and protection, then configure the MCU's ADC and DMA resources according to the manufacturer datasheet. Sampling accuracy will be influenced by analog conditioning, reference stability, layout symmetry, clock quality, and the impedance presented to the ADC inputs.

🔧

Motor and Feedback Control

The STM32L422CBT6 can support small motor-control and feedback systems where deterministic computation, GPIO flexibility, and low idle consumption are important. The Cortex-M4 processor at up to 80 MHz can execute current-loop and position-loop algorithms, and its floating-point unit assists proportional, integral, derivative, transformation, and filtering calculations. The 48-LQFP footprint permits connections to position sensors, gate drivers, and protection circuitry. Motor designs still require rigorous isolation, current sensing, gate-drive timing, overcurrent response, and thermal analysis; the MCU should not be treated as the sole protection element for power-stage failures.

What is the STM32L422CBT6?
The STM32L422CBT6 is an ultra-low-power 32-bit Arm Cortex-M4 microcontroller from STMicroelectronics. It operates at up to 80 MHz and integrates 128 KB of Flash, 40 KB of SRAM, and a USB interface in a 48-LQFP package measuring 7 mm by 7 mm. According to the manufacturer datasheet and STM32L422CB product page, it combines real-time processing capability with a low-power architecture for embedded control, sensor, monitoring, and USB-connected equipment.
What are the key specifications of STM32L422CBT6 that engineers should know?
The STM32L422CBT6 uses an Arm Cortex-M4 core with a single-precision FPU, operates at up to 80 MHz, and provides 128 KB of Flash plus 40 KB of SRAM. Its stated operating range is 1.71 V to 3.6 V, and it includes USB connectivity. The manufacturer identifies the device in a 48-LQFP 7 mm by 7 mm package, making the controller suitable for compact embedded products that require floating-point performance and USB without an external host controller.
How much Flash and SRAM does STM32L422CBT6 have?
The STM32L422CBT6 provides 128 KB of Flash memory organized as 128K x 8 bits and 40 KB of SRAM. The manufacturer datasheet identifies the Flash as embedded program storage, while the SRAM provides working memory for stack operations, data handling, buffers, and interrupt routines. These capacities are appropriate for moderate firmware images, real-time control logic, sensor processing, and USB-enabled embedded functions that do not require external memory.
What is the maximum operating frequency of STM32L422CBT6?
The STM32L422CBT6 operates at a maximum frequency of 80 MHz. According to the STMicroelectronics product page, the STM32L422xx devices use the Arm Cortex-M4 32-bit RISC core with a maximum operating frequency of 80 MHz. This clock rate supports responsive interrupt handling, digital filtering, sensor conversion workflows, communication routines, and time-sensitive control calculations within the device's low-power operating architecture.
What is the supply voltage range of STM32L422CBT6?
The STM32L422CBT6 operates from 1.71 V to 3.6 V. The manufacturer and distributor technical listings identify this range for the exact ordered device. A design should use a supply source suitable for the entire range and verify that every attached peripheral, level shifter, USB component, and external memory device supports the selected rail. The power design should follow the decoupling and grounding arrangement shown in the manufacturer datasheet.
What package does STM32L422CBT6 use?
The STM32L422CBT6 is packaged in a 48-LQFP with a 7 mm by 7 mm body size. The manufacturer product page and exact-part listings identify this package, and the device is designed for surface-mount assembly. The 48-pin footprint provides GPIO and peripheral routing options for sensor inputs, communications, control outputs, USB, and external interfaces while retaining a leaded package that can simplify inspection and rework.
Where can I download the STM32L422CBT6 datasheet PDF?
The official STM32L422CBT6 datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32l422cb.pdf. The document covers the STM32L422CB family and should be used for the exact electrical limits, pin definitions, clock tree, memory map, USB configuration, power consumption, package dimensions, and recommended application circuits. The official product page is https://www.st.com/en/microcontrollers-microprocessors/stm32l422cb.html.
Where can I find the STM32L422CBT6 pinout?
The STM32L422CBT6 pinout is found in the pin-description table and package drawings in the official STM32L422xx manufacturer datasheet. Use that table when assigning every 48-pin LQFP net, including supply, ground, reset, boot, clock, debug, and peripheral signals. The package drawing also identifies the pin-one orientation needed during PCB layout and assembly. Verify the exact suffix and ordering code against the mechanical drawing before releasing fabrication files.
Is STM32L422CBT6 suitable for low-power sensor applications?
Yes, the STM32L422CBT6 is suitable for low-power sensor applications because it belongs to STMicroelectronics' ultra-low-power STM32L4 family and combines a 40 KB SRAM with an Arm Cortex-M4 processor. It can execute filtering, scaling, and communication logic locally while using its low-power operating modes between measurement events. Actual battery life depends on the selected sleep mode, clock configuration, peripheral activity, sensor standby current, and board leakage, so measure the complete application.
STM32L422CBT6 vs STM32L421CBT6 - which is better for USB control applications?
Choose the STM32L422CBT6 when USB connectivity and the broader STM32L422 feature set are priorities, because it includes USB and the manufacturer identifies 128 KB of Flash and 40 KB of SRAM. The STM32L421CBT6 shares the 80 MHz Cortex-M4 performance class, 128 KB Flash capacity, and 40 KB SRAM, but its peripheral feature set differs. Confirm the required USB, timer, analog, and communication blocks against the pin and peripheral tables before finalizing the selection.
When should I choose STM32L422CBT6 over STM32L432CBT6?
Choose the STM32L422CBT6 when its documented USB support and STM32L422 peripheral configuration match the design more closely than the STM32L432CBT6. Both families operate at up to 80 MHz and use 128 KB of Flash, while SRAM and peripheral emphasis differ. For a new design, compare the required USB implementation, timers, ADC channels, communication peripherals, low-power modes, pin assignments, and firmware support rather than selecting only by CPU frequency.
What can replace STM32L422CBT6?
The closest drop-in candidates are same-family STMicroelectronics devices in the 48-LQFP package, including STM32L421CBT6, STM32L422CCT6, STM32L432CBT6, STM32L433CBT6, and STM32L452CBT6. Their memory sizes and peripheral sets differ, so a replacement also requires software, pin-function, clock, peripheral, and power-management review. PCB replacement is practical only when the manufacturer confirms that every used signal remains assigned to the same package pin.
Is STM32L432CBT6 the same as STM32L422CBT6?
No, the STM32L432CBT6 is related to the STM32L422CBT6 but is not an identical device. Both provide an Arm Cortex-M4 processor at up to 80 MHz and 128 KB of Flash, but their SRAM capacities and peripheral mixes differ. Treat the STM32L432CBT6 as a board-level drop-in candidate only after checking all used pin functions, interrupt mappings, timers, analog resources, USB requirements, low-power behavior, and firmware configuration.
Where to buy STM32L422CBT6 online?
Use the Request a Quote form on this page to request STM32L422CBT6 pricing, stock confirmation, order quantities, and lead time from XAIPART. The exact ordered device is a 48-LQFP STMicroelectronics microcontroller with 128 KB of Flash and a maximum CPU frequency of 80 MHz. Include your target quantity, shipment destination, and whether you need reel or tray packaging so the quote can reflect the required configuration.
What is the price and lead time for STM32L422CBT6?
Current STM32L422CBT6 pricing and lead time should be confirmed through the Request a Quote form on this page because quote-based procurement can change with quantity, packaging, availability, and destination. Submit the required order quantity, package preference, and delivery country or region. The request should identify the complete ordered part number, STM32L422CBT6, rather than the broader STM32L422CB family, to avoid a mismatch in package or suffix.
Is STM32L422CBT6 in stock?
STM32L422CBT6 inventory should be confirmed through the Request a Quote form on this page at the time of purchase. The form is the appropriate route for current stock, scheduled delivery, and minimum-order quantity because component availability can change by package and purchasing volume. State the exact ordered part number, STM32L422CBT6, and the required tray or reel format so the response reflects the correct orderable configuration.

Dados de referência de engenharia para STM32L422CBT6 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the STM32L422CBT6 when an embedded design needs an 80 MHz Arm Cortex-M4 with FPU, 128 KB of Flash, 40 KB of SRAM, USB connectivity, and a 48-LQFP footprint. Its combination is well suited to USB-connected controls, compact sensor nodes, data-acquisition products, and low-power monitoring equipment. Consider the STM32L421CBT6 when its peripheral set is a closer fit and no USB-dependent feature is required. Consider the STM32L422CCT6 when the same family and package are needed with 256 KB of Flash. The STM32L432CBT6 and STM32L433CBT6 provide 64 KB of SRAM and different peripheral emphases, while the STM32L452CBT6 provides substantially more memory. Any substitution requires verification of used pin functions, clock configuration, peripheral mapping, low-power modes, and firmware support.

Comparação com alternativas

Parâmetro Este produto STM32L421CBT6 STM32L422CCT6 STM32L432CBT6 STM32L433CBT6 STM32L452CBT6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Processor Core Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU
Maximum CPU Frequency 80 MHz 80 MHz 80 MHz 80 MHz 80 MHz 80 MHz
Flash Memory 128 KB 128 KB 256 KB 128 KB 128 KB 256 KB
SRAM 40 KB 40 KB 40 KB 64 KB 64 KB 128 KB
Floating-Point Unit Single-precision FPU Single-precision FPU Single-precision FPU Single-precision FPU Single-precision FPU Single-precision FPU

Principais diferenciais

  • Matches the 80 MHz Cortex-M4 performance class while retaining a 40 KB SRAM working-memory footprint (vs STM32L432CBT6)
  • Uses the same 48-LQFP 7 mm by 7 mm footprint as multiple same-family alternatives (vs STM32L452CBT6)
  • Provides a lower-memory replacement path without changing CPU frequency or package (vs STM32L422CCT6)

Notas de projeto

Use the manufacturer reference power circuit and place all required bypass capacitors at the corresponding supply pins with the shortest possible return paths. The STM32L422CBT6 operates from 1.71 V to 3.6 V, so verify the regulator output tolerance, startup ramp, transient response, and the voltage required by attached peripherals. Add local bulk capacitance where the reference design calls for it, and check that USB-powered and externally powered paths cannot back-feed one another during startup or shutdown.

Route USB D+ and D- as a controlled-impedance pair with continuous reference-plane support and minimize branching, vias, stubs, and test pads that disrupt the return path. Keep the USB transceiver and protection components close to the connector when an external PHY is used. Follow the manufacturer reference layout for oscillator routing, decoupling, and exposed supply connections. PCB signal-integrity checks should be repeated when trace geometry, copper layers, connector choice, or cable length changes.

Treat analog, clock, and high-speed communication nets as separate layout concerns. Place the MCU and its clock components near the intended pins, keep switching and high-current return paths away from sensitive inputs, and provide a quiet ground strategy rather than relying on fragmented plane connections. For ADC measurements, match input impedance and acquisition time to the sampling rate, use symmetric routing where practical, and evaluate source resistance against the manufacturer's recommended acquisition limits.

A pin-compatible package does not by itself guarantee a functional replacement. Before substituting any STM32L4 candidate, compare boot configuration, reset behavior, oscillator options, USB pin functions, timer channels, ADC assignments, communication peripherals, interrupt priorities, clock-tree settings, memory sizes, and low-power modes. Validate the board with the replacement firmware and peripherals before production. Also verify that the exact suffix corresponds to the intended temperature grade and packaging method.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The exact-part listing identifies the STM32L422CBT6 as RoHS compliant. Other compliance attributes require confirmation from the manufacturer product documentation.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM32L422CBT6 STM32L422CBT6 datasheet STM32L422CBT6 datasheet pdf STM32L422CBT6 pinout STM32L422CBT6 footprint STM32L422CBT6 equivalent STM32L422CBT6 replacement STM32L422CBT6 cross reference STM32L422CBT6 vs STM32L432CBT6 STMicroelectronics STM32L422CBT6 STM32L422CBT6 price STM32L422CBT6 stock STM32L422CBT6 USB application circuit STM32L422CBT6 48 LQFP pinout STM32L422CBT6 80MHz 128KB microcontroller

Componentes & termos relacionados

STMicroelectronics STM32L422CBT6 STM32L421CBT6 STM32L422CCT6 STM32L432CBT6 STM32L433CBT6 STM32L452CBT6 STM32L4 series STM32L422xx Arm Cortex-M4 Arm Cortex-M4 with FPU 32-bit RISC microcontroller ultra-low-power microcontroller embedded system system-on-chip single-precision floating-point unit 128 KB Flash memory 40 KB SRAM 80 MHz processor clock USB interface 48-LQFP package LQFP family surface-mount package RoHS USB industrial control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ