STM32L433RBT6 - 80MHz Cortex-M4 MCU | STMicroelectronics
N.º da peça: STM32L433RBT6 ✓ AtivoSTM32L433RBT6 Visão geral
An ultra-low-power microcontroller is a semiconductor designed to maintain processing performance while minimizing energy consumption during active, sleep, stop, and backup operation. The STM32L433 belongs to the STM32L4 product family, combining an Arm Cortex-M4 real-time core with analog, communications, security, and low-power peripherals. This places it within the hierarchy of microcontroller, embedded processor, and power-efficient semiconductor devices.
The STM32L433RBT6 runs from a 1.71 V to 3.6 V supply and supports temperature ranges extending from -40 °C to 85 °C, 105 °C, or 125 °C depending on the ordered device variant. Its FlexPowerControl architecture includes a 200 nA VBAT mode for the real-time clock and 32 × 32-bit backup registers. The integrated USB full-speed interface supports data-oriented devices, while the LCD controller and external SMPS capability are useful for compact, low-energy instruments.
The Cortex-M4 core uses a 32-bit RISC architecture and includes single-precision floating-point hardware. At 80 MHz, the processor provides substantially more arithmetic throughput than lower-frequency Cortex-M devices while retaining the deterministic interrupt-driven behavior expected in embedded control systems. Its 128 KB Flash memory is organized as 128K × 8 bits, and the family supports up to 64 KB of SRAM.
Typical uses include low-power sensor hubs, industrial data loggers, USB-connected instruments, compact medical monitors, security and access-control terminals, and battery-operated IoT equipment. USB full-speed connectivity is especially useful for configuration, firmware updates, and data exchange, while the LCD controller can reduce external display-controller overhead in human-interface designs.
Board design should preserve the low-power potential of the MCU by following the manufacturer’s decoupling, clock, reset, and low-power guidance. Avoid unnecessary always-on peripherals, verify the startup current path, and use a supply capable of supporting the selected operating mode without excessive voltage ripple. The 64-LQFP package also requires adequate escape routing for its dense pin arrangement.
This page combines package, memory, interface, application, and comparison guidance for engineers evaluating the STM32L433RBT6. It also identifies same-package alternatives for design flexibility while emphasizing that MCU substitutions must be checked for peripheral mapping, boot configuration, firmware support, and electrical compatibility.
Alternativas drop-in para STM32L433RBT6 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32L433RBT6 (mesmo formato e footprint) — diferindo em Package, SRAM, Flash Memory, ADC, DAC.
STM32L433RCT6
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →STM32L433RCT6P
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L433RAT6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L433RET6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L433RET6P
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L433RBT6 Classificações máximas e características elétricas
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 80 MHz |
| Peak Performance | 100 DMIPS |
| Flash Memory | 128 KB (128K × 8 bits) |
| SRAM | 64 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Faixa de temperatura de operação | -40 °C to 85 °C, 105 °C, or 125 °C |
| VBAT Mode Current | 200 nA |
| Backup Registers | 32 × 32 bits |
| USB Interface | USB full-speed |
| LCD Controller | Integrated |
| External SMPS Support | Supported |
| Encapsulamento | 64-LQFP (10 mm × 10 mm) |
| Tipo de montagem | Surface mount |
| Power Management Technology | FlexPowerControl |
Guia de Configuração de Pinos do STM32L433RBT6 64-lqfp (10 mm × 10 mm)
Configuração de pinos para STM32L433RBT6 (pacote 64-lqfp (10 mm × 10 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32L433RBT6.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32L433RBT6 é adequado para 6 aplicaçãos: Low-Power Sensor Hub, USB-Connected Test Instrument, Industrial Data Logger, Battery-Powered IoT Terminal, Medical Monitoring Controller, Security and Access-Control Terminal.
Low-Power Sensor Hub
The STM32L433RBT6 fits sensor hubs that must sample, filter, and store information without continuously running the processor at maximum frequency. Its Arm Cortex-M4 core operates up to 80 MHz for demanding foreground tasks, while FlexPowerControl supports low-power operating states between measurement cycles. The 128 KB Flash holds firmware and configuration data, and 64 KB SRAM supports buffering. A 1.71 V to 3.6 V supply range simplifies integration with low-voltage sensor rails. The 200 nA VBAT mode can preserve the real-time clock and backup registers when the main supply is removed, although the complete power budget must include sensor and interface leakage.
Recomendado
USB-Connected Test Instrument
The STM32L433RBT6 is suitable for USB-connected measurement and configuration equipment because it combines an 80 MHz Cortex-M4 processor with a USB full-speed interface. Firmware can process sensor readings, execute control logic, and exchange configuration or data with a host while occupying a single 64-LQFP footprint. The 128 KB Flash and 64 KB SRAM provide useful capacity for protocol stacks, calibration tables, and working buffers. Designers should allocate USB connection protection and routing according to the manufacturer hardware guidance, while confirming that the selected USB connector, transceiver arrangement, and power configuration meet the target device’s operating requirements.
Recomendado
Industrial Data Logger
The STM32L433RBT6 supports compact industrial loggers that record sensor, machine, or environmental information while controlling power consumption. Its 80 MHz Cortex-M4 core can manage acquisition tasks, timestamp data, and maintain communication interfaces, while the 128 KB Flash stores firmware and bounded nonvolatile logs. The integrated LCD controller can provide local status feedback without a separate display controller, reducing board area in operator-facing products. Its -40 °C-to-125 °C family capability supports industrial temperature design goals. Validate the exact ordering code, memory endurance requirements, write-protection strategy, enclosure thermal conditions, and communication isolation before production release.
Recomendado
Battery-Powered IoT Terminal
The STM32L433RBT6 fits battery-powered IoT terminals that combine local processing with long standby intervals. Its Cortex-M4 architecture handles application logic and protocol processing at up to 80 MHz, while FlexPowerControl and the 200 nA VBAT mode help reduce energy use when the main supply is unavailable. USB full-speed support can simplify manufacturing configuration, firmware recovery, or field-service data transfer. A 128 KB Flash and 64 KB SRAM configuration is appropriate for moderate firmware and buffering needs. For battery-powered deployment, calculate the complete energy budget including radio activity, sensor loads, regulator efficiency, leakage, and wake-up timing rather than considering microcontroller current alone.
Recomendado
Medical Monitoring Controller
The STM32L433RBT6 can serve as the control and communications processor in a compact medical monitoring product. Its Cortex-M4 core supports deterministic acquisition, filtering, alarm logic, and user-interface processing at up to 80 MHz, while 64 KB SRAM accommodates working buffers and 128 KB Flash stores application firmware. USB full-speed connectivity can support service tools, data export, or configuration in equipment designed around a wired maintenance interface. The LCD controller is useful for local status screens. Medical designs require appropriate hardware safety, electromagnetic-compatibility, validation, and risk-management processes; the MCU’s electrical ratings alone do not establish compliance for the finished product.
Recomendado
Security and Access-Control Terminal
The STM32L433RBT6 is appropriate for access-control and security terminals that require local decision-making, peripheral control, and host connectivity. The 80 MHz Cortex-M4 core can manage credential interfaces, event handling, display output, and communication tasks, while the integrated USB full-speed interface supports configuration or maintenance connections. Its low-power architecture benefits terminals with intermittent external power, and the 200 nA VBAT mode can preserve RTC and backup-register data during standby periods. The 64-LQFP package simplifies assembly compared with denser MCUs. Security implementations should add the required authentication, key protection, tamper response, update controls, and secure-boot procedures at the product level.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32L433RBT6 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32L433RCT6 | STM32L433RCT6P | STM32L433RAT6 | STM32L433RET6 | STM32L433RET6P |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) | 64-LQFP (10 mm × 10 mm) |
| Processor Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Peak Performance | 100 DMIPS | 100 DMIPS | 100 DMIPS | 100 DMIPS | 100 DMIPS | 100 DMIPS |
| Flash Memory | 128 KB | 256 KB | 256 KB | 256 KB | 512 KB | 512 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| Supply Voltage Range | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| USB Interface | USB full-speed | USB full-speed | USB full-speed | USB full-speed | USB full-speed | USB full-speed |
| LCD Controller | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
Principais diferenciais
- Balanced memory density for compact 64-LQFP designs (vs STM32L433RET6)
- Same-package memory upgrade without changing CPU performance (vs STM32L433RCT6)
- USB and local display support in a compact package (vs STM32L433RET6)
Notas de projeto
Design the 1.71 V to 3.6 V supply around the MCU’s active and low-mode current, the USB transceiver requirements, and the peak load from enabled peripherals. Place the manufacturer-recommended decoupling capacitors directly beside the corresponding supply and ground pins, and route return currents without sharing narrow paths with USB, analog, or switching signals. Confirm startup and brownout behavior in the selected regulator.
The 64-LQFP package has a 0.5 mm pitch, so use a fine-pitch assembly process and provide adequate board escape routing without vias directly beneath the device unless the board stackup and assembly process permit them. Separate sensitive analog inputs from USB and high-current switching paths, maintain the specified input impedance network, and follow the package drawing for pin-1 orientation and exposed thermal considerations.
Do not treat every STM32L433 ordering code as an automatic drop-in replacement. Confirm Flash size, SRAM availability, temperature grade, boot configuration, crystal or clock requirements, USB support, peripheral population, and firmware migration requirements. The STM32L433RCT6 and STM32L433RET6 share the LQFP-64 footprint, but larger Flash does not eliminate the need to review boot pins, linker layout, and application code.
Preserve the device’s low-power behavior by disabling unused peripherals, preventing unintended GPIO states during reset, and validating every wake source. The 200 nA VBAT figure applies to the specified backup mode and does not represent total product current. Include leakage from pull resistors, sensors, regulators, transceivers, and external memory when calculating battery life or standby performance.
Informações de conformidade
The manufacturer datasheet identifies the STM32L433xx family and operating range. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for the exact ordering code.