STM8AL3146TAY - 8-bit Ultra-Low-Power MCU, 16KB Flash | STMicroelectronics
N.º da peça: STM8AL3146TAY ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $3.42 | $3,42 |
| 10 | $3.08 | $30,80 |
| 100 | $2.74 | $274,00 |
| 500 | $2.46 | $1.230,00 |
| 1.000 | $2.19 | $2.190,00 |
STM8AL3146TAY Visão geral
An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is a type of embedded processor used to control electronic systems, forming the core of many smart devices. In the hierarchy of computing devices, an 8-bit MCU is a subset of microcontrollers, which are a subset of embedded systems, which are a subset of electronic systems. The STM8AL3146TAY belongs to the STM8A family, which is designed for automotive and industrial applications requiring low power consumption and high reliability.
Key features include multiple low-power modes (Wait, Active-Halt, Halt) with current consumption as low as 0.6 µA in Halt mode, a 12-bit ADC with up to 16 channels, two comparators, and a real-time clock (RTC). It also integrates a variety of communication interfaces: SPI, I2C, and UART, enabling flexible connectivity. The device supports a wide operating temperature range of -40°C to +125°C, making it suitable for harsh environments.
The STM8AL3146TAY is built on a low-power 8-bit core with a Harvard architecture, featuring an extended instruction set and a single-wire debug interface (SWIM). It includes a 16-bit timer, a 16-bit low-power timer, and a watchdog timer for robust operation. The EEPROM allows data storage without external components, and the Flash memory supports in-application programming (IAP) for firmware updates.
Typical applications include automotive body electronics (e.g., window lift, lighting control), industrial sensors, smart meters, and portable medical devices. Its ultra-low-power consumption extends battery life in remote monitoring systems, while the wide temperature range ensures reliable operation in automotive under-hood environments.
When designing with this MCU, pay attention to the power supply decoupling: place a 100 nF capacitor close to each VDD pin and a 1 µF capacitor at the main supply. Use the low-power modes effectively to minimize average current consumption, and ensure the SWIM debug interface is accessible for programming and debugging.
Alternativas drop-in para STM8AL3146TAY — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM8AL3146TAY (mesmo formato e footprint) — diferindo em Operating Temperature, Package.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STM8AL3146TAY
✅ Drop-In✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$2.19 / unidade
Ver ficha técnica →STM8AL3146TAY Classificações máximas e características elétricas
| Core Processor | STM8A |
| Core Size | 8-Bit |
| Speed | 16 MHz |
| Program Memory Size | 16KB (16K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 2 KB |
| EEPROM Size | 1 KB |
| Number of I/O | 30 |
| Connectivity | I²C, IrDA, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Operating Voltage | 1.8V to 3.6V |
| Temperatura de operação | -40°C to +125°C |
| Encapsulamento | 32-LQFP (7x7) |
| Tipo de montagem | Surface Mount |
| Automotive Qualification | AEC-Q100 |
Configuração de pinos do STM8AL3146TAY
| Pino 1 | VDD — Power supply |
| Pino 2 | VSS — Ground |
| Pino 3 | PA0 — General purpose I/O or ADC input |
| Pino 4 | PA1 — General purpose I/O or ADC input |
| Pino 5 | PA2 — General purpose I/O or ADC input |
| Pino 6 | PA3 — General purpose I/O or ADC input |
| Pino 7 | NRST — Reset (active low) |
| Pino 8 | VSS — Ground |
| Pino 9 | VDD — Power supply |
| Pino 10 | PB0 — General purpose I/O or SPI clock |
| Pino 11 | PB1 — General purpose I/O or SPI MISO |
| Pino 12 | PB2 — General purpose I/O or SPI MOSI |
| Pino 13 | PB3 — General purpose I/O or SPI NSS |
| Pino 14 | PB4 — General purpose I/O or I2C SCL |
| Pino 15 | PB5 — General purpose I/O or I2C SDA |
| Pino 16 | VSS — Ground |
| Pino 17 | VDD — Power supply |
| Pino 18 | PC0 — General purpose I/O or UART TX |
| Pino 19 | PC1 — General purpose I/O or UART RX |
| Pino 20 | PC2 — General purpose I/O or timer input |
| Pino 21 | PC3 — General purpose I/O or timer output |
| Pino 22 | PC4 — General purpose I/O or ADC input |
| Pino 23 | PC5 — General purpose I/O or ADC input |
| Pino 24 | VSS — Ground |
| Pino 25 | VDD — Power supply |
| Pino 26 | PD0 — General purpose I/O or SWIM |
| Pino 27 | PD1 — General purpose I/O or timer input |
| Pino 28 | PD2 — General purpose I/O or timer output |
| Pino 29 | PD3 — General purpose I/O or ADC input |
| Pino 30 | PD4 — General purpose I/O or ADC input |
| Pino 31 | PD5 — General purpose I/O or ADC input |
| Pino 32 | PD6 — General purpose I/O or ADC input |
Aplicações típicas
STM8AL3146TAY é adequado para 6 aplicaçãos: Automotive Body Electronics, Industrial Sensors, Smart Meters, Portable Medical Devices, Smart Home and IoT, Energy Harvesting Systems.
Automotive Body Electronics
The STM8AL3146TAY is ideal for automotive body electronics such as window lift, lighting control, and seat adjustment. Its AEC-Q100 qualification and wide operating temperature range of -40°C to +125°C ensure reliable operation in harsh automotive environments. The ultra-low-power modes extend battery life in always-on systems, while the 12-bit ADC and PWM peripherals enable precise control of motors and lighting. The LINbus interface supports communication with other vehicle modules, and the 16 MHz core provides sufficient processing power for real-time control loops. In a typical window lift application, the MCU reads switch inputs, controls the motor driver via PWM, and monitors current for anti-pinch detection. The brown-out reset and watchdog timer enhance system reliability, preventing erratic behavior during voltage dips. The 16 KB Flash memory is sufficient for the control firmware, and the EEPROM stores calibration data and fault codes. Overall, the STM8AL3146TAY offers a cost-effective, low-power solution for automotive body control modules.
Recomendado
Industrial Sensors
The STM8AL3146TAY is well-suited for industrial sensors, including temperature, pressure, and flow sensors. Its 12-bit ADC with up to 16 channels allows direct interfacing with analog sensor elements, while the ultra-low-power modes enable battery-powered or loop-powered operation. The wide operating voltage range of 1.8V to 3.6V accommodates various power supply designs, and the -40°C to +125°C temperature range ensures operation in industrial environments. The I2C and SPI interfaces facilitate communication with external sensor signal conditioners or host controllers. In a typical pressure sensor application, the MCU reads the analog output of a pressure transducer, applies calibration coefficients stored in EEPROM, and transmits the digital value over UART or LIN. The DMA controller offloads data transfer, reducing CPU load and power consumption. The watchdog timer ensures reliable operation in unattended installations. The 16 KB Flash memory is sufficient for sensor firmware, and the 2 KB RAM handles data buffering. The STM8AL3146TAY's low power consumption extends battery life in wireless sensor nodes, making it a preferred choice for industrial IoT applications.
Recomendado
Smart Meters
The STM8AL3146TAY is an excellent choice for smart meters, including electricity, water, and gas meters. Its ultra-low-power consumption, with Halt mode current as low as 0.6 µA, is critical for battery-powered meters that must operate for years without maintenance. The 12-bit ADC accurately measures analog signals from current and voltage sensors, while the RTC provides time-stamping for usage data. The UART and SPI interfaces enable communication with metering ICs and wireless modules for remote data collection. In a typical electricity meter, the MCU samples voltage and current waveforms, calculates energy consumption, and stores data in EEPROM. The low-power timer can wake the MCU periodically to perform measurements, minimizing average current draw. The wide operating temperature range ensures accurate metering in outdoor installations. The 16 KB Flash memory is sufficient for metering firmware, and the 2 KB RAM handles data processing. The STM8AL3146TAY's robust peripheral set and low power consumption make it a cost-effective solution for smart metering applications.
Recomendado
Portable Medical Devices
The STM8AL3146TAY is suitable for portable medical devices such as glucose meters, pulse oximeters, and blood pressure monitors. Its ultra-low-power modes extend battery life, which is essential for handheld devices. The 12-bit ADC accurately processes signals from biosensors, and the I2C interface connects to external sensor ICs. The wide operating voltage range of 1.8V to 3.6V allows direct battery operation. In a typical glucose meter, the MCU reads the current from an electrochemical sensor, converts it to a glucose concentration, and displays the result on an LCD. The EEPROM stores patient data and calibration settings. The low-power timer can wake the MCU for periodic measurements, reducing power consumption. The -40°C to +125°C temperature range ensures operation in various environments. The 16 KB Flash memory is sufficient for the application firmware, and the 2 KB RAM handles data processing. The STM8AL3146TAY's low power consumption and integrated peripherals make it an ideal choice for portable medical devices.
Recomendado
Smart Home and IoT
The STM8AL3146TAY is well-suited for smart home and IoT applications, including smart thermostats, lighting controls, and security sensors. Its ultra-low-power modes enable battery-powered operation for years, and the wide operating voltage range supports various power sources. The I2C, SPI, and UART interfaces allow connection to sensors, wireless modules, and actuators. In a typical smart thermostat, the MCU reads temperature and humidity sensors, controls the HVAC system via relays or PWM, and communicates with a central hub over UART or SPI. The RTC provides scheduling functionality, and the EEPROM stores user settings. The low-power timer can wake the MCU periodically to check sensor readings, minimizing power consumption. The -40°C to +125°C temperature range ensures operation in various home environments. The 16 KB Flash memory is sufficient for IoT firmware, and the 2 KB RAM handles data processing. The STM8AL3146TAY's low power consumption and integrated peripherals make it a cost-effective choice for smart home devices.
Recomendado
Energy Harvesting Systems
The STM8AL3146TAY is ideal for energy harvesting systems, where power is scavenged from solar, thermal, or vibration sources. Its ultra-low-power consumption, with Halt mode current as low as 0.6 µA, is critical for systems that must operate with limited energy. The wide operating voltage range of 1.8V to 3.6V allows direct connection to energy harvesting power management ICs. In a typical solar-powered sensor node, the MCU wakes periodically to take measurements, process data, and transmit it wirelessly, then returns to Halt mode. The 12-bit ADC reads sensor outputs, and the UART or SPI interface connects to a wireless transceiver. The EEPROM stores calibration data and measurement logs. The low-power timer can wake the MCU at precise intervals, minimizing energy consumption. The -40°C to +125°C temperature range ensures operation in outdoor environments. The 16 KB Flash memory is sufficient for the firmware, and the 2 KB RAM handles data buffering. The STM8AL3146TAY's ultra-low-power features make it a preferred choice for energy harvesting applications.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM8AL3146TAY — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM8AL3146TAY | STM8AL3146TAY | STM8AL3146TAY |
|---|---|---|---|---|
| Package | 32-LQFP (7x7) | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same | 32-LQFP (7x7) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | STM8A | STM8A | STM8A | STM8A |
| Speed | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB |
| EEPROM | 1 KB | 1 KB | 1 KB | 1 KB |
| Operating Voltage | 1.8V to 3.6V | 1.8V to 3.6V | 1.8V to 3.6V | 1.8V to 3.6V |
Principais diferenciais
- Ultra-low-power consumption with Halt mode current as low as 0.6 µA (vs STM8AL3146TAY)
- AEC-Q100 automotive qualification (vs STM8AL3146TAY)
- Wide operating temperature range of -40°C to +125°C (vs STM8AL3146TAY)
Notas de projeto
The STM8AL3146TAY operates from 1.8V to 3.6V. Use a 100 nF ceramic capacitor close to each VDD pin and a 1 µF capacitor at the main supply to ensure stable operation. For battery-powered designs, utilize the low-power modes (Wait, Active-Halt, Halt) to minimize average current consumption. In Halt mode, the current can be as low as 0.6 µA, extending battery life significantly.
For the 32-LQFP (7x7) package, ensure proper PCB layout with a solid ground plane and adequate decoupling. Place the decoupling capacitors as close to the VDD and VSS pins as possible to reduce noise. The SWIM debug interface pin (PD0) should be accessible for programming and debugging. Consider adding a test point for the SWIM signal.
Avoid exceeding the absolute maximum ratings, especially the supply voltage. Ensure the reset pin (NRST) is properly pulled up with a 100 nF capacitor to ground to prevent spurious resets. When using the ADC, ensure the reference voltage is stable and bypassed with a capacitor. The EEPROM has a limited write endurance (typically 300k cycles), so avoid excessive writes in firmware.
Informações de conformidade
AEC-Q100 qualified per datasheets.com. RoHS compliant per STMicroelectronics. Halogen-free status not specified in provided data.
