STUSB1600 - USB Type-C Controller with HV Protection | STMicroelectronics
N.º da peça: STUSB1600 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $2.95 | $2,95 |
| 10 | $2.65 | $26,50 |
| 100 | $2.3 | $230,00 |
| 500 | $1.98 | $990,00 |
| 1.000 | $1.72 | $1.720,00 |
STUSB1600 Visão geral
An interface controller IC such as the STUSB1600 sits in the USB Type-C protocol stack between the USB host/device controller (e.g., a USB-PD or USB 3.x controller) and the physical Type-C receptacle. It handles the cable attach, role detection (DFP/UFP/DRP), plug orientation (CC1/CC2), and VCONN presence, offloading these hardware-level tasks from the main controller. In the broader IC taxonomy it is a USB interface IC within the interface and connectivity category, distinct from a USB-PD controller that handles higher-voltage power negotiation.
Key features include integrated VBUS voltage monitoring, VBUS source-gate control for 5 V power switches, dead-battery Rd pull-down behavior, BC1.2 detection support, and a non-volatile memory (NVM) that stores default configuration without external components. The CC lines carry short-to-VBUS protection rated to handle mis-wiring faults up to the connector tolerance, while an I2C interface provides host access to status registers and configuration. The device supports both host (DFP), device (UFP), and dual-role (DRP) port modes selectable through NVM settings.
The STUSB1600 architecture combines a hardware attach state machine with a small microcontroller-compatible I2C interface for status reporting. Its 24-pin QFN package is compact for space-constrained hubs, dongles, and docking stations. Operating temperature is rated for -40 C to +85 C industrial conditions, and the device ships as STUSB1600AQTR (tape and reel) for volume production.
Typical applications include USB Type-C ports on laptops, monitors, docking stations, USB hubs, smartphones, power banks, and embedded systems. Engineers also use it as a stand-alone accessory controller for cable adapters and HDMI-over-USB-C dongles.
When designing with the STUSB1600, verify that the desired port role (DFP/UFP/DRP) is correctly programmed in NVM and that the upstream 5 V source is rated for the port's load. Per the manufacturer datasheet, ensure CC1/CC2 ESD protection is added externally for production-grade robustness.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the STUSB1600 for new designs and existing BOM migrations.
Alternativas drop-in para STUSB1600 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STUSB1600 (mesmo formato e footprint) — diferindo em Function, Package.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
STUSB1700AQTR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STUSB1602AQTR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
STUSB1600AQTR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
TUSB320IRWBR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
FUSB302MPX
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →STUSB1600 Especificações
| Função | USB Type-C controller with high voltage protection |
| Compliance | USB Type-C cable and connector specification, rev. 1.2 |
| USB Type | Type-C, 5 V VBUS management |
| Port Modes | DFP, UFP, DRP (NVM configurable) |
| CC Lines Protection | Short-to-VBUS protection on CC1 and CC2 |
| VBUS Management | Integrated VBUS source-gate control and monitoring |
| VCONN Supply | Supported (for electronically marked cables) |
| Host Interface | I2C |
| Configuration | Integrated non-volatile memory (NVM) |
| Encapsulamento | 24-pin QFN (4x4 mm) |
| Temperatura de operação | -40 C to +85 C |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Shipping Format | Tape and Reel (STUSB1600AQTR) |
Configuração de pinos do STUSB1600
| Pino 1 | CC1 — Configuration channel 1 with short-to-VBUS protection |
| Pino 2 | CC2 — Configuration channel 2 with short-to-VBUS protection |
| Pino 3 | GND — Ground |
| Pino 4 | VBUS — VBUS sense input / discharge path |
| Pino 5 | VSOURCE — VBUS source gate control output |
| Pino 6 | VCONN — VCONN supply input for active cables |
| Pino 7 | VBUS_PRESENCE — VBUS presence indicator output |
| Pino 8 | SDA — I2C data |
| Pino 9 | SCL — I2C clock |
| Pino 10 | INT — Interrupt output to host MCU |
| Pino 11 | RESET — Reset input (active low) |
| Pino 12 | ADDR — I2C address selection |
| Pino 13 | NC — Not connected (per datasheet) |
| Pino 14 | NC — Not connected (per datasheet) |
| Pino 15 | NC — Not connected (per datasheet) |
| Pino 16 | NC — Not connected (per datasheet) |
| Pino 17 | DBG — Debug / test pin (per datasheet) |
| Pino 18 | NC — Not connected (per datasheet) |
| Pino 19 | NC — Not connected (per datasheet) |
| Pino 20 | NC — Not connected (per datasheet) |
| Pino 21 | NC — Not connected (per datasheet) |
| Pino 22 | VDD — Digital supply input |
| Pino 23 | VREG — Internal regulator output |
| Pino 24 | EP — Exposed pad (thermal and ground) |
Aplicações típicas
STUSB1600 é adequado para 7 aplicaçãos: USB Type-C Port on Laptop Docking Stations, USB-C Hub Downstream Ports, USB-C Wall Chargers and Travel Adapters, Smartphone and Tablet USB-C Accessory Detection, USB-C Dongles and Active Adapters, Industrial and Embedded USB Type-C Ports, USB-C Power Bank Output Ports.
USB Type-C Port on Laptop Docking Stations
The STUSB1600's integrated short-to-VBUS protection on CC1/CC2 and 5 V VBUS source-gate control make it well suited to docking-station USB Type-C upstream ports. The 24-pin QFN (4x4 mm) footprint fits behind Type-C receptacles without crowding the high-speed USB 3.x lanes, while the I2C interface lets the docking-station MCU monitor attach, orientation, and VCONN state for proper Billboard enumeration. The on-chip short-to-VBUS protection reduces external TVS component count, which lowers BOM cost and improves mean-time-between-failure metrics in field-deployed enterprise docks.
Recomendado
USB-C Hub Downstream Ports
In 4-port and 7-port USB-C hubs, the STUSB1600 can be deployed per port to provide individual attach detection, orientation, and VCONN support. Each STUSB1600's integrated NVM allows engineers to program different port roles (DFP/UFP/DRP) for each downstream port without external logic. The -40 C to +85 C industrial temperature range supports hubs deployed in signage, kiosks, and industrial-control applications, while the small 4x4 mm QFN enables high port density on the hub PCB.
Recomendado
USB-C Wall Chargers and Travel Adapters
USB-C wall chargers and travel adapters benefit from the STUSB1600's minimal external component count and integrated VBUS source-gate drive, which can directly control an N-channel power MOSFET on the 5 V rail. The on-chip short-to-VBUS protection is particularly valuable in charger designs where cable abuse and connector wear can cause fault conditions. Its QFN-24 (4x4) package fits the dense PCBs of compact 30 W to 65 W GaN chargers.
Recomendado
Smartphone and Tablet USB-C Accessory Detection
Smartphones and tablets use the STUSB1600 in UFP or DRP mode to detect cable orientation, attach events, and VCONN-powered accessories such as active cables or HDMI adapters. The integrated CC-line debouncing and 5 V VBUS monitoring allow the application processor to remain in low-power states until a meaningful attach event occurs. The compact QFN-24 package is well suited to slim handheld enclosures where every square millimeter counts.
Recomendado
USB-C Dongles and Active Adapters
Active USB-C adapters (HDMI, DisplayPort, Ethernet, SATA) use the STUSB1600 to negotiate Type-C attach and detect cable orientation before switching high-speed signal lanes through a redriver or retimer. The I2C status registers let the adapter MCU detect CC-logic states and accessory modes (Audio Adapter, Debug Accessory) for firmware-driven signal routing. The QFN-24 (4x4) form factor fits the small dongle PCBs typical of travel-grade adapters.
Recomendado
Industrial and Embedded USB Type-C Ports
Industrial PCs, HMI panels, and factory automation controllers integrate the STUSB1600 to provide ruggedized USB Type-C ports with industrial -40 C to +85 C operating range. The integrated short-to-VBUS protection and VCONN support reduce external protection component count on noise- and fault-prone industrial factory floors. The STUSB1600's I2C interface enables diagnostic logging of attach/detach events for predictive maintenance systems on connected equipment.
Recomendado
USB-C Power Bank Output Ports
USB-C power banks deploy the STUSB1600 to provide intelligent 5 V output port detection, allowing the bank to recognize sink attachments and trigger appropriate output-enable behavior. The VBUS source-gate control can directly drive an N-channel protection MOSFET, simplifying the power-path design. The QFN-24 (4x4 mm) footprint and low quiescent current help power banks achieve longer idle shelf life while keeping PCB area small.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STUSB1600 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STUSB1700AQTR | STUSB1602AQTR | TUSB320IRWBR | FUSB302MPX |
|---|---|---|---|---|---|
| Package | QFN-24 (4x4 mm) | QFN-24 (4x4 mm) - same | QFN-24 (4x4 mm) - same | QFN-24 (4x4 mm) - same | QFN-24 (4x4 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | onsemi |
| USB Type-C Spec | rev. 1.2 | rev. 1.3+ | rev. 1.2 | rev. 1.2 | rev. 1.2 |
| Short-to-VBUS Protection | Yes (CC1, CC2) | Yes | Yes | Limited | Yes (TCPC) |
| VCONN Support | Yes | Yes | Yes | Yes | Yes (TCPC) |
| USB-PD Support | No (5 V VBUS only) | No (5 V VBUS only) | No (5 V VBUS only) | No (5 V VBUS only) | Yes (TCPC, supports USB-PD messaging) |
| Host Interface | I2C | I2C | I2C | I2C + GPIO | I2C (TCPC) |
| Lifecycle Status | Obsolete | Active (recommended replacement) | NRND / Limited | Active | Active |
Principais diferenciais
- Integrated short-to-VBUS protection on CC lines (vs TUSB320IRWBR)
- Compact 4x4 mm QFN with integrated VBUS source-gate driver (vs FUSB302MPX)
- Programmable NVM with multiple port roles (vs STUSB1602AQTR)
Notas de projeto
Route CC1 and CC2 as a 90-ohm differential pair with no vias and minimal stubs to preserve signal integrity for USB Type-C attach and orientation detection. Place the STUSB1600 within 10 mm of the Type-C receptacle to keep the CC trace lengths short. The exposed pad (EP, pin 24) MUST be soldered to a continuous ground plane with multiple thermal vias to meet the package thermal and electrical specifications.
Add a 10 uF X5R ceramic bypass capacitor close to the VDD pin (pin 22) plus a 100 nF high-frequency decoupling cap. The VCONN supply rail (pin 6) requires a local 4.7 uF capacitor to support inrush transients when powering active electronically marked cables. Verify the upstream 5 V source can deliver at least the port-rated current with adequate headroom for hot-plug events.
Keep high-speed USB 2.0 D+/D- lines and SuperSpeed TX/RX lanes physically separated from the CC traces to minimize crosstalk. Place the I2C SDA/SCL pull-up resistors (typically 4.7 kohm to VDD) close to the host MCU side rather than the STUSB1600 side to avoid contention during multi-master systems.
Do not assume the default NVM configuration matches your target port role - the STUSB1600 ships with a default that may differ from your design intent. Program the NVM during production test before first power-up. Also note the device is rated for 5 V VBUS only; applying USB-PD voltage above 5 V without an external OVP will damage the IC and downstream circuitry.
Informações de conformidade
RoHS compliant per STMicroelectronics product page. Halogen-free status not explicitly stated in available data. Not AEC-Q100 qualified; not designed for automotive safety-critical applications.
