Texas Instruments

THS4120CD - 3.3V, 100MHz Differential Amp | Texas Instruments

N.º da peça: THS4120CD ✓ Ativo
3.3 V Vdss 8-SOIC Package
MOQ: 1 |

THS4120CD Visão geral

Texas Instruments THS4120CD is a 3.3 V, 100 MHz, fully differential CMOS amplifier with a slew rate of 43 V/us and shutdown capability, supplied in an 8-pin SOIC package. It accepts differential input signals and produces a differential output, providing a practical signal-conditioning path for communications, data acquisition, instrumentation, and high-speed analog systems. Its 100 MHz bandwidth supports substantially faster signal throughput than general-purpose precision amplifiers.

A fully differential amplifier is an amplifier category that processes a pair of complementary or differential signals while maintaining balanced output behavior. Within the broader semiconductor hierarchy, the THS4120CD is an operational amplifier and analog signal-processing IC. Differential operation can reduce common-mode noise, simplify conversion between single-ended and balanced signals, and support interfacing with high-speed analog-to-digital converters when system timing and common-mode limits are managed correctly.

The principal performance characteristics visible from the manufacturer product page are its 3.3 V supply, 100 MHz bandwidth, and 43 V/us slew rate. Shutdown provides a controlled operating state when the circuit is not active. The fully differential architecture is important in systems that require matched signal paths, while the 100 MHz bandwidth gives it useful performance in video, communications, and test-equipment signal chains. The SOIC-8 package also supports conventional surface-mount assembly rather than requiring a specialized fine-pitch package.

The THS4120 belongs to Texas Instruments’ THS412x family of high-speed fully differential CMOS input and output amplifiers. Its architecture is intended to preserve signal fidelity across a broad bandwidth while supporting differential signal paths. Because slew rate and bandwidth determine how rapidly the amplifier can follow large or fast input transitions, the combination of 100 MHz bandwidth and 43 V/us slew rate makes timing analysis and output-loading checks important when driving downstream converters, cables, or termination networks.

Typical applications include driving high-speed data-acquisition chains, differential signal conditioning between analog stages and converters, communications interface circuitry, instrumentation amplifiers, and test and measurement systems. In a balanced signal path, the amplifier can preserve signal polarity and reject common-mode disturbance more effectively than a conventional single-ended amplifier, provided the source impedances and output loads are balanced.

Designers should verify the differential input common-mode range, output swing, stable load conditions, and shutdown logic levels against the manufacturer datasheet before committing a PCB layout. Keep the differential traces short and matched, provide a low-impedance return path, and place termination and decoupling components close to the device. Component tolerances and parasitic mismatches can reduce the practical rejection of common-mode noise even when the circuit is designed for differential operation.

This product page organizes the THS4120CD’s core specifications, family alternatives, application guidance, and practical layout considerations. It also identifies where application-specific electrical details must be checked directly in the Texas Instruments datasheet before high-volume deployment or signal-chain qualification.

Alternativas drop-in para THS4120CD — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com THS4120CD (mesmo formato e footprint) — diferindo em Package.

Texas Instruments
Package: 8-pin SOIC (D)
Comparar com THS4120CD →

THS4120IDG4

✅ Drop-In
📦 8-SOIC
Same 8-SOIC terminal arrangement and consistent main performance characteristics; device-grade ordering details require final manufacturer-datasheet verification.

📋 Alternativa de referência (fora do catálogo)

THS4120IDR

✅ Drop-In
📦 8-SOIC
Same 8-SOIC terminal arrangement and consistent main performance characteristics; orderable packaging and grade details require final manufacturer-datasheet verification.

📋 Alternativa de referência (fora do catálogo)

THS4120ID

✅ Drop-In
Texas Instruments
📦 8-SOIC
Fully differential CMOS amplifier · 1 circuit · 3.3 V · 100 MHz · 43 V/us · 5.4 nV/Hz at 10 kHz · -75 dB at 1 MHz, 2 VPP output · 64 dB

Consulte o preço

Ver ficha técnica →

THS4120CD Classificações máximas e características elétricas

Device Type Fully differential CMOS amplifier
Number of Circuits 1 circuit
Nominal Supply Voltage 3.3 V
Gain-Bandwidth Product 100 MHz
Slew Rate 43 V/us
Input Type Fully differential
Tipo de saída Differential
Shutdown Function Yes
Encapsulamento 8-SOIC
Contagem de pinos 8 pins
Tipo de montagem Surface mount
Technology Submicron CMOS

Guia de Configuração de Pinos do THS4120CD 8-soic

Configuração de pinos para THS4120CD (pacote 8-soic). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-soic para THS4120CD

Nenhum dado detalhado de pinagem disponível para THS4120CD.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

THS4120CD é adequado para 6 aplicaçãos: High-Speed Data Acquisition, Communications Signal Conditioning, Differential Instrumentation, Video Signal Interface, Test and Measurement, Low-Power Mixed-Signal Systems.

📺

High-Speed Data Acquisition

The THS4120CD fits an analog front end that must preserve small, fast differential signals before conversion by a high-speed ADC. Its 100 MHz bandwidth provides ample frequency range for many acquisition paths, while the 43 V/us slew rate allows the differential output to follow rapid signal transitions without the timing limitations of a general-purpose precision amplifier. Place the amplifier close to the ADC, maintain matched differential routing, and verify the ADC input bandwidth, common-mode range, and termination requirements. The principal benefit is balanced signal handling with common-mode disturbance rejection, provided that source and load impedances remain matched.

🌐

Communications Signal Conditioning

The THS4120CD is suitable for communications circuitry requiring a fully differential high-speed amplifier stage. Its 3.3 V supply operation, 100 MHz bandwidth, and 43 V/us slew rate align with compact, low-power signal paths operating below the amplifier’s upper frequency capability. Differential input and output connections help preserve balance and suppress common-mode noise, which is valuable when the signal passes through cables, connectors, or converter front ends. The design should include controlled source and load impedances, short matched traces, continuous ground reference, and local supply bypassing. Verify input common-mode voltage and output swing in the manufacturer datasheet before connecting it to an external network.

🏭

Differential Instrumentation

The THS4120CD can condition differential sensor or measurement signals when the instrument requires more bandwidth than conventional precision instrumentation amplifiers provide. Its 100 MHz bandwidth supports fast transients, and the fully differential topology maintains balanced paths from the input stage toward the next converter or measurement block. This topology is especially useful when common-mode pickup is present in industrial wiring or test fixtures. Engineers should balance input resistors and capacitors, account for amplifier and ADC input capacitance, and ensure the selected gain remains stable. Before deployment, confirm input common-mode range, output swing, and allowable loading using the Texas Instruments manufacturer datasheet.

📺

Video Signal Interface

The THS4120CD can serve as a balanced video-signal conditioning element when the source and destination operate with compatible common-mode and swing limits. Its 100 MHz bandwidth covers a substantial portion of common consumer and professional video bandwidth, while the 43 V/us slew rate helps preserve edge behavior for rapidly changing composite or component-derived signals. Differential routing reduces sensitivity to ground offsets and electromagnetic pickup compared with an unbalanced path when the system is implemented carefully. Use controlled impedance routing, symmetrical termination, and close placement of any compensation or filtering components. Confirm the required bandwidth, output loading, and video-specific signal levels in the manufacturer datasheet.

🔧

Test and Measurement

The THS4120CD is appropriate for high-speed test and measurement front ends that need differential excitation, sensing, or buffering. Its 100 MHz bandwidth supports measurements involving fast edges and wideband transients, while differential operation can improve immunity to common-mode noise present in fixtures and cable systems. The amplifier can be placed near the device under test to minimize trace length and preserve signal integrity, provided its input common-mode range and output swing support the measured node. Include defined source and load impedances, account for probe and fixture capacitance, and verify stable operation across all gain and termination conditions. The shutdown control is useful when the instrument must isolate the amplifier during inactive measurement intervals.

⚡

Low-Power Mixed-Signal Systems

The THS4120CD supports compact mixed-signal systems that require a 3.3 V high-speed differential amplifier with controlled shutdown capability. A 3.3 V supply can simplify integration with low-voltage processors, data converters, and digital logic, while 100 MHz bandwidth provides useful analog performance without requiring a multi-supply amplifier. The shutdown function can reduce circuit activity when the signal path is not needed, but its logic levels and timing must be checked before system control is assigned. Designers should keep the analog path short, separate it from noisy switching currents, provide local bypass capacitance, and verify the complete power-up sequence so that all external nodes remain within the manufacturer’s stated limits.

What are the key specifications of THS4120CD that engineers should know?
The THS4120CD is a 3.3 V, 100 MHz fully differential CMOS amplifier with 43 V/us slew rate and shutdown capability. According to the Texas Instruments product page, it is a single-circuit device in an 8-SOIC package. Its differential input and differential output architecture support balanced high-speed signal paths, while the 100 MHz bandwidth and 43 V/us slew rate determine its suitability for communications, instrumentation, data-acquisition, and test-equipment applications.
What is the operating voltage of THS4120CD?
The THS4120CD operates from a 3.3 V supply. Texas Instruments identifies the device as a 3.3 V fully differential CMOS amplifier on its official product page. Supply bypass capacitors should be placed close to the power pins, and the complete minimum and maximum supply limits, input common-mode limits, and output swing should be confirmed in the manufacturer datasheet before the device is used outside its nominal operating point.
What is the bandwidth and slew rate of THS4120CD?
The THS4120CD provides 100 MHz bandwidth and a 43 V/us slew rate. According to the Texas Instruments product page, these specifications identify the device as a high-speed fully differential amplifier. Bandwidth determines how much small-signal gain can be retained at a given frequency, while slew rate limits large-signal transition speed. Both values should be checked against the intended signal amplitude, load, and downstream converter acquisition bandwidth.
Where can I download the THS4120CD datasheet PDF?
The official THS4120 documentation is available through Texas Instruments at https://www.ti.com/product/THS4120. That page provides the manufacturer’s product information, ordering details, technical parameters, and datasheet access for the THS4120 family. Use the THS4120CD ordering entry to confirm the 8-SOIC package and device-specific details, and consult the pin-description table before assigning PCB signal names.
Where can I find the THS4120CD pinout?
The THS4120CD pin assignment is shown in the pin-configuration section of the Texas Instruments THS4120 manufacturer datasheet. The verified product information identifies the device as an 8-SOIC package. Use that table for differential input, differential output, supply, ground, and shutdown connections because signal names and shutdown polarity must be mapped directly to the exact ordering option before layout release.
What can replace the THS4120CD?
THS4120ID, THS4120IDG4, and THS4120IDR are same-family Texas Instruments options listed in cross-reference information for the THS4120CD. The comparison information describes THS4120IDG4 and THS4120IDR as having consistent terminals, package, and main performance characteristics. Final substitution still requires checking the exact temperature grade, orderable suffix, production status, and manufacturer datasheet for every electrical limit.
Is THS4120IDG4 the same as THS4120CD?
THS4120IDG4 is listed as a fully replaceable same-package comparison part for THS4120CD because its terminal arrangement and principal performance characteristics are described as consistent. The visible manufacturer product information identifies THS4120CD as a 3.3 V, 100 MHz, 43 V/us fully differential amplifier in 8-SOIC. Treat the cross-reference as a starting point and verify the exact ordering temperature grade and device limits before approving it as a drop-in replacement.
When should I choose THS4120CD over another THS4120 family member?
Choose THS4120CD when the design specifically requires the 8-SOIC ordering option identified by Texas Instruments for the 3.3 V, 100 MHz, 43 V/us fully differential amplifier. A THS4120 family alternative may be preferable when its documented temperature grade, lifecycle status, or orderable suffix better matches the production program. The cross-reference information supports the THS4120ID, THS4120IDG4, and THS4120IDR as close alternatives.
Is THS4120CD suitable for high-speed data acquisition?
The THS4120CD is suitable for many high-speed data-acquisition signal paths because it offers 100 MHz bandwidth and 43 V/us slew rate in a fully differential configuration. Differential operation can help reject common-mode noise and simplify balanced converter interfacing. Suitability still depends on the ADC input bandwidth, required gain, output loading, input common-mode range, and system noise performance, which must be evaluated using the manufacturer datasheet.
How do I design a PCB layout for THS4120CD?
Place power bypass capacitors close to the supply pins, use a continuous ground reference, and route the differential input and output paths as short, impedance-matched pairs. Avoid interrupting the return path beneath the device and keep unrelated high-current or switching nodes away from the amplifier inputs. Confirm the exact pin names and exposed routing requirements in the manufacturer datasheet, then use the PCB pin-description table as the authoritative assignment guide.
Does THS4120CD have shutdown control?
The THS4120CD includes a shutdown function, as identified by Texas Instruments in the product description. Shutdown can reduce activity when the signal path is not required, but the acceptable logic levels and timing must follow the manufacturer datasheet. Verify how shutdown interacts with the differential outputs and external network because correct state control is especially important when the amplifier shares a board with test equipment or power-managed converters.
Where can I buy THS4120CD online?
Use the Request a Quote form on this page to request THS4120CD availability, current lead time, and an order quotation. The form lets the buyer confirm the exact 8-SOIC ordering option without relying on a potentially stale listing or an incorrect package suffix. Include target quantity, date code requirements, shipment destination, and whether multiple reels or inspection documentation are required.
What is the price of THS4120CD?
The current THS4120CD quotation is generated through the Request a Quote form on this page. The form is the appropriate route for volume pricing, factory packaging, date-code requirements, and shipping terms. It also helps prevent an inquiry from being tied to a different THS4120 orderable suffix or package, both of which can affect availability and commercial terms.
What is the lead time for THS4120CD?
Current THS4120CD lead time depends on factory inventory, order volume, date-code requirements, and the selected orderable suffix. Submit the Request a Quote form on this page with the required quantity and delivery schedule to obtain a responsive lead-time confirmation. Also state whether assembly, inspection, or traceability documents are needed so the quotation reflects the complete purchasing requirement.
Is THS4120CD in stock?
Stock status for THS4120CD should be confirmed through the Request a Quote form on this page at the time of purchase. The form supports quantity- and date-code-specific availability checks for the exact 8-SOIC ordering option. Include your required delivery date and shipping country because availability and scheduling can vary with order size, traceability requirements, and destination.
What is the best Texas Instruments equivalent for THS4120CD?
THS4120IDG4 is the closest Texas Instruments alternative identified in the cross-reference information because the terminals and package are described as consistent with THS4120CD and its main functional characteristics align. The comparison also identifies THS4120IDR and THS4120ID as related family options. Engineers should verify package dimensions, temperature grade, lifecycle status, and electrical limits in the datasheet before final substitution.

Dados de referência de engenharia para THS4120CD — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose THS4120CD when the design needs the exact 8-SOIC ordering option for a 3.3 V, 100 MHz, 43 V/us fully differential CMOS amplifier with shutdown. It is particularly suitable for balanced high-speed data-acquisition, communications, instrumentation, video, and test paths. THS4120IDG4 is the closest same-family option when its documented grade and orderable suffix better match the production program. THS4120IDR may be selected when its orderable packaging and availability fit the assembly plan. THS4120ID provides another related family option with consistent principal functionality. Because the listed alternatives have closely aligned headline specifications, final choice should be based on exact temperature grade, lifecycle status, orderable suffix, and manufacturer datasheet limits rather than bandwidth alone.

Comparação com alternativas

Parâmetro Este produto THS4120IDG4 THS4120IDR THS4120ID
Device Type Fully differential CMOS amplifier Fully differential CMOS amplifier Fully differential CMOS amplifier Fully differential CMOS amplifier
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit
Nominal Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V
Gain-Bandwidth Product 100 MHz 100 MHz 100 MHz 100 MHz
Slew Rate 43 V/us 43 V/us 43 V/us 43 V/us
Input Type Fully differential Fully differential Fully differential Fully differential
Output Type Differential Differential Differential Differential
Shutdown Function Yes Yes Yes Yes

Principais diferenciais

  • Combines fully differential I/O with high-speed operation (vs THS4120IDG4)
  • Supports compact 3.3 V mixed-signal designs (vs THS4120IDR)
  • Provides differential signal conditioning with shutdown control (vs THS4120ID)

Notas de projeto

Route both differential inputs and both differential outputs as short, geometrically matched pairs over a continuous ground reference. Place termination, matching, and compensation networks close to the relevant device pins, and avoid routing beneath the package if the ground plane is interrupted. Balance the source and load impedances to preserve common-mode rejection. Confirm pin names and layout guidance in the Texas Instruments manufacturer datasheet before releasing the PCB.

Connect the THS4120CD to a stable 3.3 V supply and place the required bypass capacitance close to the power pins. Keep high-current switching paths and their return currents away from the amplifier inputs and outputs. Verify supply tolerances, startup behavior, and shutdown logic levels in the manufacturer datasheet. The shutdown function must not be assumed to place every output node in a particular voltage state without checking the device’s specified behavior.

Check the complete signal path against the amplifier’s 100 MHz bandwidth and 43 V/us slew rate. Include source impedance, cable or PCB loss, load capacitance, downstream converter input capacitance, and the bandwidth required by the measured signal. Use impedance-controlled routing where applicable and validate the final eye, transient response, or settling behavior at the system level rather than relying only on nominal amplifier bandwidth.

Do not select the amplifier solely from its 100 MHz headline bandwidth. Confirm differential input common-mode range, output swing, allowable loading, and gain stability for the intended circuit. Component tolerances and unmatched input networks can reduce practical common-mode rejection. When substituting a family member, compare the exact orderable suffix and temperature grade rather than assuming that the base MPN alone defines electrical equivalence.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance status was not explicitly stated in the manufacturer or distributor information. Check the current Texas Instruments product page, material declaration, and applicable orderable-part documentation before making a compliance claim.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

THS4120CD THS4120CD datasheet THS4120CD datasheet pdf THS4120CD pinout THS4120CD specifications Texas Instruments THS4120CD THS4120CD 100MHz amplifier THS4120CD fully differential amplifier THS4120CD replacement THS4120CD equivalent THS4120CD cross reference THS4120CD vs THS4120IDG4 THS4120CD SOIC-8 footprint THS4120CD application circuit THS4120CD price and stock

Componentes & termos relacionados

Texas Instruments THS4120CD THS4120IDG4 THS4120IDR THS4120ID fully differential amplifier differential amplifier operational amplifier analog signal-processing IC semiconductor CMOS submicron CMOS process 100 MHz bandwidth 43 V/us slew rate 3.3 V power supply differential input differential output shutdown control 8-SOIC SOIC family surface-mount package common-mode rejection high-speed data acquisition communications signal conditioning instrumentation
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ