TJA1042TK/3/1 - 5 Mbit/s CAN FD Transceiver | NXP
N.º da peça: TJA1042TK/3/1 ✓ AtivoTJA1042TK/3/1 Visão geral
A CAN transceiver is an interface IC within the automotive communication hierarchy, translating logic-level TXD and RXD signals into the physical differential CAN bus and converting received bus levels back into a controller-readable signal. The TJA1042 family supports the ISO 11898 physical-layer framework and is positioned between a CAN protocol controller and the CANH and CANL network conductors. Its VIO input separates the digital interface voltage from the transceiver's main supply, improving compatibility with low-voltage controllers.
The device operates as a one-channel CAN transceiver with differential bus signaling and a maximum supported data rate of 5 Mbit/s. Standby mode reduces power consumption when the node is not actively communicating, while bus wake-up allows a connected controller to detect qualifying bus activity. Passive unpowered behavior helps avoid loading or interfering with the bus when the device supply is absent. These characteristics support both conventional CAN and CAN FD physical layers.
The TJA1042 emphasizes improved electromagnetic compatibility and electrostatic-discharge performance for electrically demanding automotive networks. Its 3.3 V-capable VIO interface reduces the need for level-shifting components between the transceiver and compatible microcontrollers. The main transceiver supply remains separate from the logic-side VIO supply, allowing the digital interface voltage to be selected independently within the supported controller supply range.
Typical uses include electric-vehicle powertrain and body-control networks, industrial automation equipment, commercial vehicle systems, and other embedded CAN nodes. It can also support CAN FD links used for diagnostics, chassis communication, gateway modules, and distributed sensors where higher bus throughput and robust transient handling are useful. The compact 3 x 3 mm HVSON package supports space-constrained boards but requires careful exposed-pad thermal design.
PCB implementation should follow the manufacturer's land pattern and pin description exactly. Preserve the recommended CANH and CANL routing, provide a common ground return to the controller, place the bus and supply protection components near the relevant pins, and account for the exposed thermal pad when estimating junction temperature. Confirm that VIO is connected to the intended logic supply and that pin 5 is not left according to a different ordering variant's pinout.
This product record combines the manufacturer interface description with package, ordering, and cross-reference information. It also highlights the VIO and standby considerations that determine whether a superficially similar CAN transceiver can replace this device on an existing PCB.
Alternativas drop-in para TJA1042TK/3/1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
SIT1042QTK/3
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
TJA1042TK/3/1 Especificações
| Product Type | High-speed CAN transceiver with Standby mode |
| Supported Protocol | CAN and CAN FD |
| Maximum Data Rate | 5 Mbit/s |
| CAN Transceiver Channels | 1 channel |
| Bus Interface | Differential two-wire CAN bus |
| Logic Supply | VIO, 3.3 V or 5 V controller interface |
| VIO Operating Voltage Range | 2.8 V to 5.5 V |
| Controller Supply Compatibility | 3 V to 5 V |
| Standby Mode | Yes |
| Bus Wake-Up | Yes |
| Unpowered Behavior | Passive |
| Electromagnetic Compatibility | Improved EMC performance |
| Electrostatic Discharge Performance | Improved ESD performance |
| Physical Layer Standard | ISO 11898 |
| Encapsulamento | 8-HVSON, 3 x 3 mm |
| Tipo de montagem | Surface mount |
| Pin 5 Function | VIO |
Configuração de pinos do TJA1042TK/3/1
| Pino 1 | TXD — Transmit data input from the CAN controller |
| Pino 2 | GND — Ground connection |
| Pino 3 | VCC — Main transceiver supply |
| Pino 4 | RXD — Receive data output to the CAN controller |
| Pino 5 | VIO — Logic-side supply for a 3.3 V or 5 V controller interface |
| Pino 6 | CANL — CAN bus low input and output |
| Pino 7 | CANH — CAN bus high input and output |
| Pino 8 | STB — Standby control input |
Aplicações típicas
TJA1042TK/3/1 é adequado para 6 aplicaçãos: Automotive Body-Control Networks, Electric-Vehicle Powertrain Communication, Industrial Automation and Factory CAN, Commercial-Vehicle Diagnostics, CAN FD Gateway Modules, Robotics and Equipment Sensor Networks.
Automotive Body-Control Networks
The TJA1042TK/3/1 fits body-control modules that exchange diagnostic, door, lighting, climate, and seat-control data over a CAN FD-capable network. Its data-rate capability reaches 5 Mbit/s, while the 3.3 V or 5 V VIO interface supports a broad range of automotive microcontrollers. Standby mode and bus wake-up help balance low-power operation with network availability. Improved EMC and ESD performance are particularly relevant around vehicle wiring, although the complete design still needs the manufacturer's recommended protection network.
Recomendado
Electric-Vehicle Powertrain Communication
The TJA1042TK/3/1 is suitable for powertrain and gateway modules that need a dependable CAN physical layer alongside higher-bandwidth CAN FD traffic. Its 5 Mbit/s capability increases payload throughput compared with classic-only CAN designs, and VIO permits direct interface with compatible 3.3 V or 5 V controllers. The transceiver's improved EMC and ESD characteristics support harsh vehicle environments. Production designs should still verify transient levels, bus topology, grounding, and the exact qualification status of the ordered grade.
Recomendado
Industrial Automation and Factory CAN
The TJA1042TK/3/1 can connect industrial controllers, sensor nodes, and remote I/O modules to a two-wire CAN network. Its support for data rates up to 5 Mbit/s benefits systems that use CAN FD for diagnostics or larger payload transfers, while VIO supports both 3.3 V and 5 V controller families. The compact 8-HVSON 3 x 3 mm package helps reduce board area in distributed factory equipment. For installation near motors or long cables, apply the manufacturer's bus-fault and surge-protection recommendations.
Recomendado
Commercial-Vehicle Diagnostics
The TJA1042TK/3/1 is appropriate for commercial-vehicle diagnostic gateways, trailer modules, and cab electronics that need CAN FD-capable communication in a compact package. The 5 Mbit/s physical-layer rate allows compatible controllers to transfer larger diagnostic datasets, and the VIO input accommodates 3.3 V or 5 V processors. Standby mode limits consumption during inactive periods, while bus wake-up supports distributed node activation. Automotive qualification, transient protection, and vehicle-level EMC validation remain essential design gates.
Recomendado
CAN FD Gateway Modules
The TJA1042TK/3/1 works well in gateways that bridge a CAN FD physical bus with another communication or processing domain. The transceiver handles the differential physical layer while the controller manages framing, arbitration, error handling, and higher-layer protocols. A 5 Mbit/s bus rate improves gateway throughput, and the VIO interface simplifies connections to controllers using 3.3 V or 5 V supplies. Designers should reserve filtering, common-mode choke, protection, and test points according to the NXP application guidance.
Recomendado
Robotics and Equipment Sensor Networks
The TJA1042TK/3/1 is useful in robot controllers, industrial sensors, and compact equipment modules that exchange commands, status, and diagnostic information over CAN. Its small 8-HVSON 3 x 3 mm footprint preserves board space, while the 5 Mbit/s rate supports CAN FD payloads and faster updates. VIO enables direct interfacing with common low-voltage microcontrollers, and Standby mode reduces consumption when the subsystem is idle. Use differential routing, a solid ground reference, and appropriate bus protection to preserve signal integrity.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para TJA1042TK/3/1 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | SIT1042QTK/3 |
|---|---|---|
| Brand | NXP Semiconductors | Sitronix |
| Package | 8-HVSON, 3 x 3 mm | 8-HVSON, 3 x 3 mm |
| Maximum Data Rate | 5 Mbit/s | 5 Mbit/s |
| Protocol Support | CAN and CAN FD | CAN and CAN FD |
| Logic Interface Supply | 3.3 V or 5 V VIO | 3.3 V or 5 V I/O support |
| Standby Mode | Yes, with bus wake-up | Yes, with lower standby current indicated |
| Pin 5 | VIO | VIO, pin-to-pin compatible |
Principais diferenciais
- Direct VIO support for 3.3 V and 5 V controllers (vs SIT1042QTK/3)
- NXP CAN FD performance target (vs SIT1042QTK/3)
- Established 3 x 3 mm HVSON integration (vs SIT1042QTK/3)
Notas de projeto
Use the NXP land pattern for the 8-HVSON 3 x 3 mm package and confirm pin 5 as VIO for this ordering variant. CANH and CANL should form a controlled-impedance differential pair with minimal stubs, symmetrical routing, and a continuous ground reference. Place transient-protection devices near the external bus connector rather than immediately beside the transceiver, and route the protection path so high-energy surge current does not flow through sensitive logic traces.
The HVSON package uses an exposed thermal pad, so pad connection, solder coverage, and surrounding copper materially affect junction temperature. Follow the NXP package drawing for the exposed-pad geometry and do not assume that a solder-mask-defined pad transfers heat effectively. Estimated: thermal performance must be evaluated using the PCB copper area, copper layers, ambient temperature, and transceiver dissipation; the manufacturer layout guidance should control the final implementation.
Do not substitute an HVSON ordering variant without checking the meaning of pin 5. TJA1042 variants may use either VIO or SPLIT on pin 5, and that change can alter logic-level compatibility or PCB usability. Before approving a replacement, compare TXD, RXD, STB, VCC, GND, CANH, CANL, and pad assignments, then review dominant-state output behavior, standby timing, wake-up thresholds, and unpowered bus loading.
Informações de conformidade
The manufacturer product information confirms ISO 11898 physical-layer support, CAN FD operation up to 5 Mbit/s, improved EMC performance, improved ESD performance, Standby mode, bus wake-up, and passive unpowered behavior. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.