TLE8458GV33XUMA1 - 5V 10.4kBd LIN Transceiver | Infineon
N.º da peça: TLE8458GV33XUMA1 ✗ Fim de vidaTLE8458GV33XUMA1 Visão geral
A LIN transceiver is a physical-layer interface that converts serial logic signals into LIN bus levels and reconstructs received bus data into a logic-level output. As an interface IC within the broader semiconductor and automotive connectivity hierarchy, it connects a microcontroller's UART or LIN-capable peripheral to a wired vehicle network. Integrating the voltage regulator alongside the transceiver can simplify ECU power architecture by supplying a local 5 V rail while also providing LIN signal conditioning.
The TLE8458GV33XUMA1 combines a 5 V regulated output, a full-duplex 1-transmitter and 1-receiver LIN interface, and a maximum specified LIN data rate of 10.4 kBd. Its 7 V to 27 V operating supply range supports automotive battery-derived environments while providing a 5 V output for associated interface circuitry. The automotive qualification encoded by the XUMA1 ordering code makes this version relevant to vehicle electronic control units and other embedded automotive applications.
Technically, the LIN interface uses a single bidirectional bus conductor, while the transceiver provides separate logic-side transmit and receive functions. The integrated regulator is intended to reduce the number of external power-management elements in a LIN node. Designers must account for the supply-to-output voltage difference, regulator dissipation, bus termination, grounding, and the voltage levels required by the connected microcontroller when planning the PCB.
Typical applications include body-control modules, door and seat controllers, climate-control panels, ambient lighting controllers, steering-wheel electronics, and small distributed LIN nodes. The 10.4 kBd rate is appropriate for low-bandwidth control and status traffic rather than high-speed Ethernet or CAN communication. The 8-pin DSO format also supports compact ECU layouts where component count and board area are constrained.
For a new design, route the LIN connection with protection appropriate to the vehicle electrical environment and confirm the bus waveform against the selected master or slave timing. Place required input, output, and decoupling components close to their associated pins, use a low-impedance ground return, and verify that the regulator thermal load remains acceptable at the highest expected supply voltage. Before replacing another LIN transceiver, compare regulator output, supply range, pin functions, bus polarity, timing, and qualification rather than relying on package similarity alone.
This page consolidates the verified TLE8458GV33XUMA1 specifications, source documentation, application guidance, and drop-in comparison information into an engineering-focused reference for automotive LIN interface design.
Alternativas drop-in para TLE8458GV33XUMA1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
TLE8458GV33
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TLE8458GV33XUMA1 Especificações
| Product Type | LIN bus transceiver with integrated voltage regulator |
| LIN Transmitter Count | 1 |
| LIN Receiver Count | 1 |
| Duplex | Full duplex |
| Maximum LIN Data Rate | 10.4 kBd |
| Integrated Regulator Output | 5 V |
| Tensão de alimentação de operação | 7 V to 27 V |
| Output Voltage Tolerance | 2 % maximum |
| Encapsulamento | 8-pin PG-DSO-8 |
| Tipo de montagem | SMD surface mount |
| Temperatura de operação | -40 °C to +150 °C |
| Automotive Qualification | Automotive XUMA1 ordering code |
| Packaging | Reel, tape and reel |
Guia de Configuração de Pinos do TLE8458GV33XUMA1 8-pin pg-dso-8
Configuração de pinos para TLE8458GV33XUMA1 (pacote 8-pin pg-dso-8). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para TLE8458GV33XUMA1.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
TLE8458GV33XUMA1 é adequado para 6 aplicaçãos: Automotive Body-Control Module LIN Interface, Door and Seat Control Node, Automotive Climate-Control Panel, Automotive Lighting Controller, Steering-Wheel Electronics, Distributed Sensor and Actuator Node.
Automotive Body-Control Module LIN Interface
The TLE8458GV33XUMA1 fits a body-control module that connects a low-speed LIN subnetwork to a central body controller. Its 10.4 kBd maximum data rate is appropriate for switch positions, door states, and actuator commands, while the integrated 5 V regulator can provide a local rail for compatible interface circuitry. The 7 V to 27 V operating supply accommodates automotive power environments, and the -40 °C to +150 °C range supports harsh vehicle environments. Place the transceiver close to the LIN connector and route the bus away from sensitive analog and high-speed digital signals.
Recomendado
Door and Seat Control Node
A door or seat controller can use the TLE8458GV33XUMA1 for distributed LIN communication with a body master node. The single-bus LIN interface supports data rates to 10.4 kBd, which is sufficient for position commands, switch events, and status reporting without a higher-bandwidth network. Its integrated 5 V output simplifies local supply partitioning, while the 8-pin PG-DSO-8 package limits board footprint in compact modules. The design should include the bus connection and protection components specified by the manufacturer application guidance.
Recomendado
Automotive Climate-Control Panel
The TLE8458GV33XUMA1 is appropriate for a climate-control panel that receives commands and reports button or display status through a LIN network. Its 10.4 kBd rate is more than sufficient for this low-bandwidth workload, while the integrated 5 V regulator can support compatible local interface sections. The 7 V to 27 V supply range and -40 °C to +150 °C operating range align with automotive cabin electronics. A practical implementation should verify logic levels, regulator loading, grounding, and the system LIN timing waveform before production.
Recomendado
Automotive Lighting Controller
The TLE8458GV33XUMA1 can connect a distributed lighting controller to a LIN master for lamp commands, operating-state reporting, and fault information. Because LIN traffic for these functions is generally low bandwidth, the 10.4 kBd maximum rate is suitable, while the integrated 5 V regulator helps supply local interface circuitry. Its compact 8-pin PG-DSO-8 package supports space-constrained electronic modules. Designers should keep the LIN trace short where possible and validate protection against the vehicle wiring environment.
Recomendado
Steering-Wheel Electronics
The TLE8458GV33XUMA1 can provide a LIN connection for steering-wheel switches, rotary controls, or paddle inputs. The 10.4 kBd interface is suitable for event messages and control commands, and the integrated 5 V regulator reduces the number of local supply stages needed near the connector. Its automotive ordering code and -40 °C to +150 °C range suit demanding cabin electronics. Keep the bus and ground routing robust, verify the regulator's thermal behavior, and confirm the device's logic-side pin functions in the manufacturer documentation.
Recomendado
Distributed Sensor and Actuator Node
The TLE8458GV33XUMA1 is well suited to small distributed LIN nodes that connect sensors or actuators to an automotive master. A 10.4 kBd bus can carry configuration, periodic status, and simple command traffic, while the integrated 5 V regulator supports compatible nearby circuitry from a 7 V to 27 V input. The 8-pin DSO package is compact but not thermally automatic: calculate worst-case regulator dissipation at maximum supply voltage and ambient temperature, then provide copper area appropriate to the selected PCB construction.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para TLE8458GV33XUMA1 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | TLE8458GV33 |
|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies |
| Package | 8-pin PG-DSO-8 | PG-DSO-8 |
| Product Type | LIN transceiver with integrated voltage regulator | LIN transceiver with integrated voltage regulator |
| Integrated Regulator Output | 5 V | 5 V |
| Maximum LIN Data Rate | 10.4 kBd | 10.4 kBd |
| Driver and Receiver Count | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver |
| Ordering Code Qualification | Automotive XUMA1 | Base ordering code; qualification details require verification |
Principais diferenciais
- Automotive ordering configuration (vs TLE8458GV33)
- Integrated power and communication (vs TLE8458GV33)
- Wide automotive operating range (vs TLE8458GV33)
Notas de projeto
Estimated: regulator dissipation equals the difference between input and 5 V output voltage multiplied by output load current, plus internal losses. At a 27 V input and 100 mA output, the ideal pass-element drop is 2.2 V, producing a minimum of 0.22 W before internal loss. Confirm the actual load, copper area, ambient temperature, and package thermal limits in the manufacturer datasheet before approving the layout.
Place the LIN bus connection, protection components, and their ground-return paths close to the transceiver. Keep the logic-side receive and transmit routes away from switching-node and high-current return paths. Use a continuous ground reference, minimize loop area, and follow the manufacturer application diagram for the required capacitors and bus components. Confirm pad geometry against PG-DSO-8 land patterns rather than relying only on the nominal package name.
Do not select a replacement from package similarity alone. Verify the exact pin functions, 5 V regulator output, 7 V to 27 V supply range, 10.4 kBd rate, logic thresholds, bus polarity, and automotive qualification ordering code. TLE8458GV33 is the only identified same-family candidate, and its ordering-code differences still require review. Also account for the listed Not For New Designs lifecycle status when beginning a new vehicle program.
The LIN bus is a relatively slow single-wire network, but its edges can still create radiated and conducted emissions. Terminate the bus according to the system specification, use the manufacturer-recommended protection network, and avoid long stubs. Maintain a low-impedance ground return and place any filtering close to the connector so that environmental protection does not distort the LIN waveform or communication timing.
Informações de conformidade
The automotive XUMA1 ordering code is stated in the product data, but a specific AEC-Q100 grade and formal RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration were not identified. Confirm these requirements with Infineon Technologies before production release.