Texas Instruments

TLV2362IP - Dual 7MHz Low-Noise Op Amp | Texas Instruments

N.º da peça: TLV2362IP ✓ Ativo
5 V Vdss 8-pin PDIP Package
MOQ: 1 |

TLV2362IP Visão geral

The Texas Instruments TLV2362IP is a dual, 5 V, 7 MHz, low-noise operational amplifier with input noise density of 8 nV/√Hz, supplied in an 8-pin PDIP package. The two amplifiers share a common supply architecture and can operate from low-voltage rails, including ±1 V operation, while maintaining a wide output swing. Its combination of low noise, 7 MHz gain-bandwidth product, and flexible supply range makes it appropriate for precision signal conditioning, sensor interfaces, audio paths, and low-voltage analog systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The TLV2362 belongs to the operational-amplifier hierarchy, which sits within amplifier ICs and analog signal-chain components. By applying negative feedback, a practical circuit can create stable gain, filters, buffers, comparators, and active analog signal-processing stages. A dual amplifier also reduces package count when two channels perform similar functions.

The TLV2362IP provides useful low-noise performance for demanding signal chains. Its 8 nV/√Hz input noise density supports accurate extraction of weak signals, while the 7 MHz gain-bandwidth product allows useful bandwidth in moderate-gain stages. Operation from approximately ±1 V supports compact, low-energy designs where signal levels are limited. The wide output swing increases the usable output range, while the original Texas Instruments bipolar process supports conventional low-noise linear operation.

Each device contains two operational amplifiers, enabling dual-channel filtering, instrumentation, audio, or feedback-control implementations. The 8-pin PDIP format is a through-hole package that remains useful for prototypes, educational platforms, and repair assemblies where a socket or through-hole assembly is preferred. Unlike a surface-mount package, the PDIP body is easier to inspect, probe, and replace manually.

Typical uses include low-level sensor preamplification, active audio filtering, buffered instrumentation, and low-voltage control loops. Designers should confirm input common-mode range, output swing, slew rate, stability, and load capability for the specific operating condition. Decoupling capacitors should be placed close to the supply pins, and sensitive analog traces should be kept away from switching nodes and high-current return paths.

This page combines the manufacturer’s device description with packaging information, practical layout guidance, and an honest drop-in comparison. It also separates confirmed electrical characteristics from parameters that require direct confirmation against the manufacturer datasheet before final design release.

Alternativas drop-in para TLV2362IP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

TL972IP

✅ Drop-In
📦 8-pin PDIP
Uses the same 8-pin PDIP format but has different bandwidth and noise characteristics from the TLV2362IP's 7 MHz gain-bandwidth product and 8 nV/√Hz input noise density.

📋 Alternativa de referência (fora do catálogo)

TLV2362IP Classificações máximas e características elétricas

Amplifier Type Dual operational amplifier
Number of Channels 2 channels
Nominal Supply Voltage 5 V
Lowest Total Supply Voltage ±1 V
Gain-Bandwidth Product 7 MHz
Input Noise Density 8 nV/√Hz
Process Technology Original Texas Instruments bipolar process
Output Swing Wide output swing
Signal Conditioning Capability Improved dynamic range in low-voltage systems
Encapsulamento 8-pin PDIP
Tipo de montagem Through-hole
Lead Pitch 7.62 mm

Configuração de pinos do TLV2362IP

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pino 1 OUTA — Amplifier A output
Pino 2 IN-A — Amplifier A inverting input
Pino 3 IN+A — Amplifier A non-inverting input
Pino 4 V- — Negative supply connection
Pino 5 IN+B — Amplifier B non-inverting input
Pino 6 IN-B — Amplifier B inverting input
Pino 7 OUTB — Amplifier B output
Pino 8 V+ — Positive supply connection

Aplicações típicas

TLV2362IP é adequado para 6 aplicaçãos: Low-Level Sensor Signal Conditioning, Precision Active Filtering, Low-Voltage Audio Preamp, Industrial Instrumentation Amplification, Portable Measurement Interface, Educational and Prototype Analog Circuits.

🧩

Low-Level Sensor Signal Conditioning

The TLV2362IP fits low-level sensor front ends where source signals are small and added amplifier noise can limit measurement quality. Its 8 nV/√Hz input noise density provides a useful margin for conditioning weak sensor outputs, while the 7 MHz gain-bandwidth product supports moderate closed-loop bandwidth. The dual configuration can amplify or filter two related sensor channels. Before implementation, verify that the sensor voltage stays within the input common-mode range and that the selected feedback network remains stable at the intended gain.

🌐

Precision Active Filtering

The TLV2362IP is appropriate for active filter stages requiring low input-referred noise and more bandwidth than a low-frequency precision amplifier may provide. Its 7 MHz gain-bandwidth product leaves bandwidth for moderate-gain filter sections, and the 8 nV/√Hz noise density helps preserve small-signal information. Both amplifiers can implement related channels, such as a matched low-pass and high-pass stage. Component tolerances, operating frequency, output loading, and the manufacturer’s recommended stability techniques should be evaluated together.

🎧

Low-Voltage Audio Preamp

The TLV2362IP can serve as a low-voltage audio preamplifier when the design requires lower noise than a general-purpose rail-to-rail amplifier. The specified 8 nV/√Hz input noise density is favorable for small audio signals, while operation down to ±1 V supports compact dual-supply systems. The 7 MHz bandwidth comfortably covers many audio-band signal paths. Check the output swing against the required load and confirm that the selected gain and feedback network meet the device’s stability requirements.

🏭

Industrial Instrumentation Amplification

The TLV2362IP is useful in instrumentation and industrial control circuits that amplify small differential signals close to the measurement source. Low input noise helps retain signal integrity, and the 7 MHz gain-bandwidth product supports faster control or measurement loops than very-low-bandwidth precision amplifiers. The PDIP package supports through-hole assembly and repairable industrial electronics. Designers should still verify input common-mode limits, offset behavior, output swing, and the noise contribution of external resistors.

📱

Portable Measurement Interface

The TLV2362IP fits portable, low-voltage measurement equipment where two channels must be conditioned without using separate amplifier packages. Its ability to operate at voltages as low as ±1 V supports compact analog sections, while the 8 nV/√Hz input noise density is beneficial when amplifying weak sensor outputs. The 7 MHz bandwidth provides useful margin for moderate-gain stages. Power-consumption limits, output loading, and battery-rail tolerances should be checked in the final system configuration.

🔧

Educational and Prototype Analog Circuits

The 8-pin PDIP package makes the TLV2362IP convenient for educational, prototype, and repair work where through-hole construction simplifies wiring and inspection. Students can use the dual amplifier for inverting, non-inverting, filtering, and comparator demonstrations while experiencing a low-noise, 7 MHz device rated for 5 V operation. The minimum ±1 V operating capability makes rail planning accessible. Prototype work should still include bypass capacitors, current limiting for output drives, and correct handling of the two amplifier channels.

Resumo dos produtos recomendados

TLV2362IP Texas Instruments Usado em: Low-Level Sensor Signal Conditioning, Precision Active Filtering, Low-Voltage Audio Preamp, Industrial Instrumentation Amplification, Portable Measurement Interface, Educational and Prototype Analog Circuits TL972IP Same-package dual amplifier candidate Usado em: Low-Level Sensor Signal Conditioning, Precision Active Filtering, Low-Voltage Audio Preamp, Industrial Instrumentation Amplification, Portable Measurement Interface, Educational and Prototype Analog Circuits
What are the key specifications of TLV2362IP that engineers should know?
The TLV2362IP is a dual operational amplifier rated for a 5 V nominal supply, with a 7 MHz gain-bandwidth product and 8 nV/√Hz input noise density. According to the Texas Instruments product page and manufacturer datasheet, it can operate at voltages as low as ±1 V while retaining a wide output swing. The device uses an original Texas Instruments bipolar process and is offered in an 8-pin PDIP package.
What is the operating voltage of TLV2362IP?
The TLV2362IP supports a nominal 5 V supply and can operate at voltages as low as ±1 V. According to the Texas Instruments product page, the low-voltage capability is achieved without sacrificing the wide output swing or the high-performance noise characteristics. Confirm the exact input, output, and common-mode limits for the selected operating rail against the manufacturer datasheet before finalizing a circuit.
What is the noise performance of TLV2362IP?
The TLV2362IP has an input noise density of 8 nV/√Hz. According to the Texas Instruments product page, this low noise is suitable for signal-conditioning applications where weak source signals must be amplified without adding excessive input-referred noise. The 7 MHz gain-bandwidth product supports moderate-bandwidth closed-loop stages, while the bipolar process provides the low-noise behavior expected from this amplifier family.
What package does TLV2362IP use?
The TLV2362IP uses an 8-pin PDIP, or through-hole dual in-line package, with 7.62 mm lead pitch. The DigiKey product listing identifies the exact TLV2362IP orderable as a standard dual amplifier in an 8-PDIP package. The 8-pin PDIP format is useful for through-hole assembly, prototyping, educational use, and applications where manual socketed replacement is preferred.
Where can I download the TLV2362IP datasheet PDF?
The official TLV2362 datasheet is available from Texas Instruments through the product datasheet link at https://www.ti.com/lit/gpn/TLV2362. The same manufacturer product page is at https://www.ti.com/product/TLV2362 and includes ordering information, quality information, and device links. Use the manufacturer PDF for the final pin descriptions, electrical limits, and application guidance.
Where can I find the TLV2362IP pinout?
The TLV2362IP pinout is documented in the pin-description table in the Texas Instruments manufacturer datasheet. The device has eight PDIP pins, with pins 1 and 7 serving as the two amplifier outputs, pins 2 and 6 as inverting inputs, pins 3 and 5 as non-inverting inputs, pin 4 as the negative supply, and pin 8 as the positive supply. Use that table when assigning PCB tracks and checking polarity.
Can TL972IP replace TLV2362IP as a drop-in part?
The TL972IP is the closest identified same-package alternative because it also uses an 8-pin PDIP format and is a dual operational amplifier. However, its bandwidth and noise characteristics differ from the TLV2362IP’s 7 MHz gain-bandwidth product and 8 nV/√Hz input noise density. Treat it as a candidate replacement only after checking supply range, input common-mode limits, output swing, offset, slew rate, and stability in the actual circuit.
TLV2362IP vs TL972IP — which is better for low-noise signal conditioning?
The TLV2362IP is generally the stronger choice when low-noise performance is the primary requirement because Texas Instruments specifies 8 nV/√Hz input noise density and a 7 MHz gain-bandwidth product. The TL972IP may suit designs where its rail-to-rail operating characteristics are preferable, but it does not match the TLV2362IP’s stated noise and bandwidth combination. Verify both input and output limits before making a board-level substitution.
What is the difference between TLV2362IP and TLV2362IPSR?
The TLV2362IP and TLV2362IPSR are both TLV2362-family dual amplifiers, but their mounting packages differ. The TLV2362IP is an 8-pin PDIP through-hole device, while the TLV2362IPSR is an 8-pin SOIC surface-mount device according to its manufacturer listing. They are therefore not PCB drop-in equivalents, even though the underlying amplifier function is related.
When should I choose TLV2362IP instead of TL972IP?
Choose the TLV2362IP when the application benefits from its specified 8 nV/√Hz input noise density and 7 MHz gain-bandwidth product, particularly for weak-signal amplification and precision filtering. Choose the TL972IP only when its alternate electrical characteristics better satisfy the design and the complete operating conditions have been checked. The shared 8-pin PDIP outline simplifies mechanical consideration but does not by itself prove electrical interchangeability.
Is TLV2362IP suitable for low-voltage sensor interfaces?
Yes, the TLV2362IP is suitable for low-voltage sensor interfaces because it can operate at voltages as low as ±1 V and provides 8 nV/√Hz input noise density. Its 7 MHz gain-bandwidth product is adequate for many moderate-bandwidth conditioning stages. Confirm that the sensor output remains inside the amplifier’s input common-mode range and that the required gain is stable with the selected feedback network.
What can replace TLV2362IP?
The TL972IP is a potential 8-pin PDIP replacement candidate, but it should not be treated as an automatic drop-in substitute. The two devices differ in electrical characteristics, including bandwidth and noise-related positioning, so the replacement must be checked for supply compatibility, common-mode range, output swing, stability, slew rate, and load behavior. PCB compatibility alone is insufficient for a functional replacement.
Is TLV2362IP the same as TL972IP?
No. Both are dual operational amplifiers associated with an 8-pin PDIP-style package, but they are not electrically identical. The TLV2362IP is specified as a 5 V, 7 MHz, 8 nV/√Hz low-noise device, while the TL972IP has a different parameter set. Use the TLV2362IP when its noise and bandwidth ratings meet the design requirement, and validate the TL972IP independently before substitution.
Where can I buy TLV2362IP online?
The TLV2362IP can be requested through the “Request a Quote” form on this page. The form is the appropriate route for current commercial availability, exact package confirmation, quantity requirements, and lead-time information. Because commercial terms can change, request a quote instead of relying on a static price or an unverified stock statement.
What is the price of TLV2362IP?
Current commercial pricing for the TLV2362IP should be requested through the “Request a Quote” form on this page. The form allows quantity, package, and delivery requirements to be included with the inquiry, helping avoid confusion with other TLV2362 order codes or surface-mount versions. The structured pricing area above should be used for the current rendered offer.
What is the lead time and stock status for TLV2362IP?
The current lead time and stock status for TLV2362IP should be confirmed through the “Request a Quote” form on this page. Include the required quantity, 8-pin PDIP package, target delivery date, and shipment destination in the request. These commercial terms are quote-dependent and should not be inferred from a catalog listing or a generic distributor result.

Dados de referência de engenharia para TLV2362IP — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the TLV2362IP when the design needs a dual, low-noise amplifier with a specified 8 nV/√Hz input noise density, 7 MHz gain-bandwidth product, and operation down to ±1 V. Its 8-pin PDIP construction also suits repairable assemblies and conventional through-hole prototypes. Consider the TL972IP only when it provides a required electrical advantage and its supply range, common-mode limits, output swing, offset, noise, bandwidth, and stability have been verified against the target circuit. The TLV2362IPSR is not a drop-in alternative because it uses an SOIC package. For precision sensor interfaces, compare input-referred noise and achievable gain rather than bandwidth alone. For active filters, check the complete feedback network and component tolerances. In every case, confirm that the signal and supply levels remain within the manufacturer’s operating limits before releasing the PCB design.

Comparação com alternativas

Parâmetro Este produto TL972IP
Brand Texas Instruments Texas Instruments
Package 8-pin PDIP 8-pin PDIP
Amplifier Configuration Dual operational amplifier Dual operational amplifier
Mounting Type Through-hole Through-hole

Principais diferenciais

  • Lower-noise positioning for weak-signal conditioning (vs TL972IP)
  • Defined bandwidth for moderate-gain signal paths (vs TL972IP)
  • Low-voltage operation with a wide output swing (vs TL972IP)
  • Repairable through-hole implementation (vs TLV2362IPSR)

Notas de projeto

Place the supply bypass capacitor as close as practical to the V+ and V- pins, with the ground return connected through a low-impedance path. Keep analog input traces short and route them away from switching inductors, power converters, and high-speed digital signals. Because the PDIP package has long leads, pay particular attention to lead inductance and provide local high-frequency bypassing.

Confirm the maximum signal amplitude, common-mode voltage, output swing, and load current against the actual operating rail before applying large inputs. The TLV2362 can operate at voltages as low as ±1 V, but low rail voltage reduces headroom for input and output excursions. For sensor interfaces, calculate the maximum source amplitude and guard against saturation rather than relying only on nominal supply voltage.

Do not treat the TLV2362IPSR as a PCB drop-in replacement because it uses an 8-pin SOIC package rather than the TLV2362IP’s 8-pin PDIP footprint. Likewise, verify every electrical limit before using TL972IP. A matching package outline does not guarantee matching common-mode range, output swing, noise, bandwidth, offset, or stability characteristics.

For two-channel signal paths, keep corresponding analog routes symmetrical where practical to minimize channel-to-channel timing and noise differences. Avoid placing the two channels near unrelated high-energy switching circuits unless the analog section is adequately isolated. Use short feedback components and maintain a stable return path, particularly when the amplifier drives sensors, filters, or downstream converters.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The available manufacturer descriptions do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact TLV2362IP order code. AEC-Q100 qualification is not applicable to this general-purpose operational amplifier.

Buscas relacionadas

TLV2362IP datasheet TLV2362IP pinout TLV2362IP datasheet pdf TLV2362IP equivalent TLV2362IP replacement TLV2362IP cross reference TLV2362IP vs TL972IP TLV2362IP footprint TLV2362IP price TLV2362IP stock Texas Instruments TLV2362IP TLV2362IP 8nV/rtHz op amp TLV2362IP application circuit TLV2362IP PDIP pinout

Componentes & termos relacionados

Texas Instruments TLV2362IP TLV2362 TL972IP TLV2362IPSR dual operational amplifier operational amplifier amplifier IC analog integrated circuit semiconductor low-noise amplifier 8 nV/√Hz 7 MHz gain-bandwidth product bipolar process 8-pin PDIP PDIP through-hole package SMD signal conditioning active filter sensor interface input common-mode voltage output swing power supply rejection ratio RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ