TMS320C6457CCMH - 1 GHz Fixed-Point DSP | Texas Instruments
N.º da peça: TMS320C6457CCMH ✓ AtivoTMS320C6457CCMH Visão geral
A digital signal processor is a specialized semiconductor that executes filtering, transforms, communications, and control algorithms in real time. Unlike a general-purpose microprocessor, a DSP organizes arithmetic units and memory access around parallel instruction execution and sustained data rates. The TMS320C6457 belongs to the hierarchy DSP processor, communications infrastructure processor, fixed-point signal processor, TMS320C6000 platform, and semiconductor.
The key features of this device include a 1 GHz operating frequency, fixed-point processing, a third-generation advanced VelociTI VLIW architecture, and a 688-pin FCBGA package. The stated operating-temperature range is 0°C to 100°C, and the associated device listing identifies a 1.1 V supply requirement. Its high pin count provides a substantial interface and power-delivery footprint compared with small-package microcontrollers, supporting dense communications-infrastructure designs.
The C6457 architecture is intended to combine high-performance fixed-point arithmetic with parallel execution across multiple processing units. This architecture allows communications algorithms to distribute filtering, modulation, spectral analysis, and data movement across parallel pipelines. The product page specifically identifies video and communications-infrastructure processing as suitable application areas. The exact memory, peripheral, and accelerator configurations require confirmation from the complete manufacturer datasheet and device-specific ordering information.
Typical deployments include telecom line-card signal processing, video and image processing, communications baseband systems, industrial signal-processing equipment, and high-performance embedded network-infrastructure platforms. In such systems, the 1 GHz DSP core performs compute-intensive algorithms while dedicated serial, parallel, and memory interfaces move data between external devices and processing resources.
PCB implementation requires careful attention to the 688-ball FCBGA footprint, power and ground distribution, high-speed routing, and thermal performance. The package’s thermal and electrical characteristics make multilayer board construction and controlled impedance particularly relevant. Designers should use the manufacturer’s pinout, power-supply recommendations, and layout guidance when defining decoupling, ball assignments, and signal-integrity constraints.
This product page combines the confirmed orderable information, package and temperature details, architecture description, practical application guidance, and same-family replacement considerations. It is intended to help engineers assess fit, plan power delivery and routing, and identify whether a same-family TMS320C6457 speed-grade variant can simplify an existing design.
Alternativas drop-in para TMS320C6457CCMH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
TMS320C6457CCMH2
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TMS320C6457CCMH3
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TMS320C6457CCMH4
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TMS320C6457CCMH5
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TMS320C6457CCMH7
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
TMS320C6457CCMH Especificações
| Device Type | Fixed-point digital signal processor (DSP) |
| Product Family | TMS320C6000 DSP platform |
| Processor Clock | 1 GHz |
| Architecture | Third-generation advanced VelociTI very-long-instruction-word (VLIW) architecture |
| Application Class | Communications infrastructure digital signal processor |
| Arithmetic Format | Fixed-point |
| Tensão de alimentação | 1.1 V |
| Package Type | 688-pin FCBGA (CMH) |
| Package Dimensions | 23 x 23 mm |
| Ball Count | 688 balls |
| Faixa de temperatura de operação | 0°C to 100°C |
| Tipo de montagem | Surface mount |
| Packaging | Tube |
| Minimum Order Quantity | 60 units |
| Status RoHS | RoHS3 compliant |
| Status do ciclo de vida | Active |
Guia de Configuração de Pinos do TMS320C6457CCMH 23 x 23 mm
Configuração de pinos para TMS320C6457CCMH (pacote 23 x 23 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para TMS320C6457CCMH.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
TMS320C6457CCMH é adequado para 6 aplicaçãos: Telecom Baseband Signal Processing, Video and Image Processing, Industrial Signal Processing, Communications Network Infrastructure, High-Speed Data Acquisition, Test and Measurement Equipment.
Telecom Baseband Signal Processing
The TMS320C6457CCMH fits telecom baseband equipment that performs high-throughput fixed-point filtering, modulation, interpolation, and spectral processing. Its 1 GHz clock and third-generation advanced VelociTI VLIW architecture allow multiple arithmetic operations and data-movement tasks to execute in parallel, which is valuable when the line card must process several channels within a deterministic latency budget. The processor is placed beside external memory and network or transport interfaces, while the 688-pin FCBGA footprint supplies the extensive ball assignments needed for high-speed signaling. The primary engineering concern is power delivery and thermal control because a dense communications module can combine sustained computation with high I/O activity. Confirm clocking, memory topology, device voltage requirements, and thermal margins against the complete manufacturer documentation before production release.
Recomendado
Video and Image Processing
The TMS320C6457CCMH is suitable for video infrastructure in which fixed-point transforms, filtering, pixel transport, and image pre-processing require sustained parallel computation. Texas Instruments identifies video among the application areas enabled by the high-performance C6457 architecture. At 1 GHz, the DSP can divide a video pipeline among parallel execution units while moving image data through external memory and peripheral interfaces. A practical implementation uses the FCBGA device on a multilayer board with controlled-impedance links between the processor, memory, and video interface logic. Because the 688-ball package requires careful power delivery and dense routing, designers should minimize high-speed trace lengths, provide the prescribed decoupling, and model thermal performance at the maximum sustained frame and I/O rates. Validate the required pixel format, memory bandwidth, and synchronization architecture before finalizing the design.
Recomendado
Industrial Signal Processing
The TMS320C6457CCMH can serve as the computational core of an industrial signal-processing system that performs real-time filtering, spectral analysis, or control algorithms over high-rate sampled data. Its fixed-point VLIW architecture is suited to workloads that benefit from parallel arithmetic and deterministic data movement, while the 1 GHz clock supports demanding update rates. The processor may be paired with external acquisition logic and memory, then connected to downstream control or communications hardware through the device’s parallel and serial interfaces. For industrial equipment, designers should account for the stated 0°C to 100°C device range, enclosure temperature, power-supply tolerance, and sustained thermal load. A multilayer PCB, local high-frequency decoupling, and an uninterrupted thermal path are essential for dependable operation. Validate clock jitter, external memory timing, and interrupt latency against the end-system requirements.
Recomendado
Communications Network Infrastructure
The TMS320C6457CCMH is appropriate for communications network-infrastructure nodes that must combine packet handling, fixed-point signal processing, and real-time data movement. Its 1 GHz advanced VLIW core provides parallel execution for algorithms such as filtering, equalization, transforms, and protocol-adjacent processing, while the large FCBGA interface count supports external memory and multiple high-speed connections. In a line-card or network-module design, the DSP should be placed centrally relative to memory and transceiver devices so that critical routes remain short and impedance-controlled. Power and ground distribution require especially careful partitioning because processor activity and external-interface switching can create simultaneous dynamic-current peaks. Use the manufacturer’s reference designs and layout guidance to establish ball assignments, decoupling, clock topology, and thermal vias. Confirm that all selected memory and interface devices support the required electrical and timing constraints.
Recomendado
High-Speed Data Acquisition
The TMS320C6457CCMH can act as the real-time computation engine in a high-speed data-acquisition system where incoming samples must be filtered or transformed with predictable latency. The 1 GHz fixed-point processor provides parallel arithmetic capacity, and its third-generation advanced VelociTI architecture is designed to balance execution and data movement. A practical channel card connects the DSP to external memory and high-speed serial or parallel converters, using the FCBGA footprint to provide the necessary power, ground, and signal balls. Design the memory subsystem for sustained bandwidth rather than peak bandwidth alone, because streaming algorithms can otherwise stall on data movement. Separate analog and digital ground regions appropriately, use short return paths, and maintain the manufacturer’s recommended decoupling arrangement. Verify converter latency, clock synchronization, buffer depth, and system-level timing with the actual acquisition chain before firmware and hardware sign-off.
Recomendado
Test and Measurement Equipment
The TMS320C6457CCMH is suitable for test and measurement instruments that perform real-time analysis of high-bandwidth or multi-channel data. Examples include spectral analyzers, communications test sets, and embedded measurement products that require deterministic fixed-point arithmetic and flexible parallel processing. The 1 GHz clock can execute iterative transforms and filtering while external memory retains sample histories and configuration data. The 688-pin FCBGA implementation calls for controlled-impedance routing, carefully assigned power and ground balls, and thermal analysis that includes adjacent high-speed circuitry. Designers should also account for deterministic startup, clock jitter, interrupt scheduling, and synchronization with measurement peripherals. Use the manufacturer datasheet and reference material to validate memory timing, interface voltage levels, and decoupling before fabricating the first board, then verify thermal performance under the instrument’s worst-case channel-loading condition.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para TMS320C6457CCMH — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | TMS320C6457CCMH2 | TMS320C6457CCMH3 | TMS320C6457CCMH4 | TMS320C6457CCMH5 | TMS320C6457CCMH7 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 688-pin FCBGA (CMH) | 688-pin FCBGA (CMH) | 688-pin FCBGA (CMH) | 688-pin FCBGA (CMH) | 688-pin FCBGA (CMH) | 688-pin FCBGA (CMH) |
| Processor Family | TMS320C6457 | TMS320C6457 | TMS320C6457 | TMS320C6457 | TMS320C6457 | TMS320C6457 |
| Arithmetic Format | Fixed-point | Fixed-point | Fixed-point | Fixed-point | Fixed-point | Fixed-point |
| Architecture | Third-generation advanced VelociTI VLIW | Third-generation advanced VelociTI VLIW | Third-generation advanced VelociTI VLIW | Third-generation advanced VelociTI VLIW | Third-generation advanced VelociTI VLIW | Third-generation advanced VelociTI VLIW |
| Application Class | Communications infrastructure DSP | Communications infrastructure DSP | Communications infrastructure DSP | Communications infrastructure DSP | Communications infrastructure DSP | Communications infrastructure DSP |
Principais diferenciais
- Confirmed 1 GHz orderable grade in the 688-pin CMH package (vs TMS320C6457CCMH2)
- Exact manufacturer orderable configuration (vs TMS320C6457CCMH7)
- Established communications-infrastructure positioning (vs TMS320C6457CCMH4)
- Documented commercial-grade temperature interval (vs TMS320C6457CCMH3)
Notas de projeto
The 688-ball FCBGA requires a multilayer board with uninterrupted access to the device power, ground, and high-speed signal balls. Follow the manufacturer’s recommended stack-up, ball assignments, and escape-routing geometry rather than relying on generic via-in-pad practice. Keep decoupling connections extremely short and provide low-impedance power and ground planes; otherwise, the processor’s sustained switching activity can degrade clock quality and increase signal-integrity risk.
Plan the supply network for both the confirmed 1.1 V operating condition and transient current from simultaneous DSP execution and external I/O. Use the manufacturer’s power-supply sequencing and decoupling recommendations to determine the required voltage rails and startup order. Validate the source impedance, control-loop margin, and measured droop under worst-case processing load rather than checking only nominal steady-state supply voltage.
Thermal design must include the FCBGA, board copper, vias, adjacent devices, and the enclosure. The TMS320C6457CCMH operates up to 100°C, but package temperature depends on dissipated processor power, ambient conditions, airflow, and PCB heat spreading. Use a thermal model or physical measurement to verify junction-temperature margin, and avoid placing temperature-sensitive components directly beneath the processor without accounting for the heat path.
Clock and high-speed memory routes should follow the manufacturer’s length-matching, impedance, and topology recommendations. External memory performance can be limited by signal degradation rather than DSP arithmetic capacity, especially when the FCBGA escape routes transition onto a multilayer PCB. Use a signal-integrity simulation with the actual stack-up, connector and memory models, and worst-case clock jitter before releasing high-volume board files.
Do not treat a TMS320C6457 speed-grade suffix change as a guaranteed functional equivalent. Before replacing TMS320C6457CCMH with another family suffix, compare clock rate, core voltage, power consumption, temperature grade, initialization, memory interface requirements, and software timing assumptions. Also verify the exact 688-ball CMH footprint and tube ordering configuration, since the device is not a generic pin-compatible DSP marketplace equivalent.
Informações de conformidade
The associated catalog record identifies the device as RoHS3 compliant. No automotive qualification, REACH declaration, halogen-free status, or conflict-minerals statement was identified.