TMS320C6472ECTZ - 500MHz 737-FCBGA DSP | Texas Instruments
N.º da peça: TMS320C6472ECTZ ✓ AtivoTMS320C6472ECTZ Visão geral
A digital signal processor, or DSP, is a semiconductor optimized to execute repetitive numerical operations efficiently. In the product hierarchy, a DSP is a microprocessor used for signal processing, a processor type that is also a semiconductor and an embedded computing component. Compared with a general-purpose processor, a DSP emphasizes predictable arithmetic throughput, parallel data movement, and deterministic execution of filtering, transform, communications, and control algorithms.
The TMS320C6472ECTZ combines a 500 MHz clock with a 32-bit processing architecture. The family is identified as a fixed-point DSP, and one catalog listing states 4,000 MIPS of processing performance with a 32-bit external data-bus width. Its 737-pin FCBGA package provides the interface density required for a high-end fixed-point processor, while the 24 mm by 24 mm body dimensions define a demanding surface-mount layout requirement.
Technical evaluation must account for more than clock frequency. The device is presented in the manufacturer documentation as a fixed-point processor, and its high pin count indicates extensive external connectivity for data movement, memory, control, and peripherals. System designers should evaluate the complete device data sheet for electrical limits, memory configuration, interface requirements, initialization procedures, clocking, thermal performance, and exposed-pad implementation before committing a board layout.
Typical design roles include communications signal processing, industrial control, audio and image processing, and high-throughput embedded filtering. These uses benefit from a dedicated fixed-point execution engine and deterministic operation, although final suitability depends on the algorithm, external memory, required peripherals, operating temperature, and package constraints specified for the selected orderable part.
The most important layout concern is the 737-terminal FCBGA package. A professional PCB design must use a manufacturer-supported land pattern, provide appropriate escape routing between the fine-pitch array and external circuitry, implement the required power and ground-plane architecture, and verify thermal performance across every populated corner of the board.
This product record combines the exact ordering designation, manufacturer and distributor part details, package information, pricing evidence, sourcing guidance, and engineering-oriented selection notes. It also distinguishes verified device facts from application guidance and clearly identifies where the detailed electrical or pin-level information must be confirmed in the manufacturer documentation.
Alternativas drop-in para TMS320C6472ECTZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasTMS320C6472ECTZ Especificações
| Processor Type | Fixed-point digital signal processor |
| Maximum Processor Clock | 500 MHz |
| Architecture Width | 32 bit |
| Processing Performance | 4,000 MIPS |
| External Data-Bus Width | 32 bit |
| Encapsulamento | 737-terminal FCBGA (CTZ) |
| Package Body Size | 24 mm x 24 mm |
| Terminal Count | 737 terminals |
| Terminal Pitch | 0.8 mm |
| Tipo de montagem | Surface mount |
| Maximum Interface Clock Frequency | 50 MHz |
| Orderable Packaging | Tray |
Guia de Configuração de Pinos do TMS320C6472ECTZ 24 mm x 24 mm
Configuração de pinos para TMS320C6472ECTZ (pacote 24 mm x 24 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para TMS320C6472ECTZ.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
TMS320C6472ECTZ é adequado para 6 aplicaçãos: Communications Signal Processing, Industrial Control and Automation, Audio Processing, Image and Video Processing, Test and Measurement Equipment, Networked Edge Processing.
Communications Signal Processing
The TMS320C6472ECTZ suits communications equipment that must perform filtering, correlation, modulation, or other fixed-point signal-processing operations with deterministic throughput. Its 500 MHz clock and stated 4,000 MIPS capability provide substantial arithmetic performance for high-rate data paths, while the 32-bit architecture supports wide data manipulation. The implementation must be planned around the 737-terminal FCBGA footprint, external memory requirements, and the device-specific clock and interface requirements in the manufacturer data sheet, Revision G.
Recomendado
Industrial Control and Automation
The TMS320C6472ECTZ can serve as the high-performance signal-processing element in an industrial controller when feedback loops, vibration analysis, or other numerical operations exceed the practical workload of a general-purpose control MCU. Its fixed-point architecture and 500 MHz maximum clock support efficient numerical execution. Before adoption, confirm the specified temperature range, supply requirements, functional safety strategy, and long-term program availability, then design the PCB around the manufacturer CTZ land pattern and thermal constraints.
Recomendado
Audio Processing
The TMS320C6472ECTZ is appropriate for embedded audio systems requiring real-time filtering, mixing, or fixed-point sample-rate conversion in a compact processor package. The 500 MHz fixed-point engine can execute deterministic numerical operations while the 32-bit data path accommodates demanding audio workloads. Engineering effort should focus on external memory latency, audio-interface timing, clock synchronization, and heat removal. The 737-ball CTZ package also requires high-density board assembly and inspection capability.
Recomendado
Image and Video Processing
The TMS320C6472ECTZ can be evaluated for image-processing tasks that require predictable fixed-point arithmetic at high throughput, such as filtering, motion-related calculations, or sensor-data conditioning. Its maximum 500 MHz clock and 4,000 MIPS stated performance support demanding embedded workloads, while the 32-bit architecture facilitates wide data movement. System feasibility depends on external memory bandwidth, image-buffer capacity, accelerator requirements, and software optimization. The FCBGA escape routing and thermal design must be validated before production.
Recomendado
Test and Measurement Equipment
The TMS320C6472ECTZ is suitable for embedded analysis instruments in which real-time filtering, FFT-style numerical processing, or waveform correction must execute predictably. A 500 MHz fixed-point processor provides a high arithmetic ceiling, while the 32-bit architecture supports general-purpose data handling. The design should verify acquisition timing, external memory performance, synchronization interfaces, and software test coverage. Because the device uses a 737-terminal FCBGA, prototype assembly and signal-integrity validation become significant manufacturing considerations.
Recomendado
Networked Edge Processing
The TMS320C6472ECTZ can serve in an edge-processing system that combines high-throughput numerical processing with external communications hardware. Its 500 MHz fixed-point engine is suitable for preprocessing sensor data, implementing network transforms, or offloading algorithms from a host processor, while the 32-bit data bus supports wider transfers. Designers must partition real-time processing between the DSP and companion devices, validate end-to-end latency, and provide separate Ethernet interface circuitry rather than assuming the DSP includes every required network function.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para TMS320C6472ECTZ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Package | 737-terminal FCBGA (CTZ), 24 mm x 24 mm |
| Brand | Texas Instruments |
| Processor Type | Fixed-point digital signal processor |
| Maximum Processor Clock | 500 MHz |
| Architecture Width | 32 bit |
| Processing Performance | 4,000 MIPS |
| External Data-Bus Width | 32 bit |
| Terminal Count | 737 terminals |
| Terminal Pitch | 0.8 mm |
| Mounting Type | Surface mount |
Principais diferenciais
- High fixed-point processing throughput (vs No verified drop-in alternative was identified for direct comparison.)
- Purpose-built DSP positioning (vs No verified drop-in alternative was identified for direct comparison.)
- High-density integrated processor interface (vs No verified drop-in alternative was identified for direct comparison.)
Notas de projeto
Use the manufacturer-supported CTZ land pattern for the 737-terminal FCBGA instead of adapting a generic BGA footprint. Preserve clean escape paths from the 0.8 mm-pitch terminal array and validate every layer transition against the selected PCB stack-up. Place decoupling structures close to the device power terminals, maintain the required plane connectivity, and confirm the exposed-pad treatment and thermal-via arrangement shown in the official package design documentation.
Separate sensitive analog inputs, clocks, high-speed memories, and communication interfaces according to the device data-sheet recommendations. Route clocks with short, controlled-impedance paths and keep noisy switching or power-conversion nodes away from sensitive inputs. Because the package has 737 terminals, complete escape routing before placement, then use the manufacturer's pin-assignment tables to verify every net and power connection rather than relying on visual package inspection.
Thermal performance must be evaluated at the maximum expected processor activity, supply voltage, ambient temperature, and board orientation. The 737-terminal FCBGA has a large thermal-management surface, but that advantage is realized only with a suitable copper plane, via array, board area, and enclosure path. Use the manufacturer thermal information for final calculations and validate the assembled design under worst-case operating conditions rather than relying on the 500 MHz clock rating alone.
Do not treat the generic cross-reference search pages as proof that another processor is pin-compatible. A valid replacement must match the CTZ footprint, power architecture, clock inputs, memory interface, peripheral assignments, and software initialization. Also avoid deriving memory, I/O-voltage, and operating-temperature assumptions from abbreviated listings; confirm those details in the TMS320C6472 data sheet, Revision G, and the exact orderable-device information.
Informações de conformidade
The available ordering information identifies the device and package but does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements and the exact orderable-device status with Texas Instruments before regulatory submission.