W78E054DFG - 40MHz 8-Bit 8051 MCU | Nuvoton | 16KB Flash
N.º da peça: W78E054DFG ✗ Fim de vidaW78E054DFG Visão geral
An 8-bit 8051 microcontroller is an embedded-processing IC built around the 8051 instruction set and a compact register and memory architecture. Within the semiconductor hierarchy, it belongs to the microcontroller category, combining a CPU core, program memory, data memory, timers, serial interfaces, and interrupt-control resources on one integrated circuit. The W78E054D is marketed as a 6T or 12T 8051 MCU that is configurable and pin-compatible with traditional 12T 8051 designs.
Key characteristics include an 8-bit processing engine, a maximum clock frequency of 40 MHz, and 16 KB of flash memory organized as 16K by 8 bits. Its operating range of 2.4 V to 5.5 V allows use in both 3.3 V and 5 V equipment. The 44-pin PQFP package provides a surface-mount option for compact control boards, while the -40°C to 85°C rating supports industrial-temperature deployments.
The W78E054D/W78E052D series is designed to accommodate a wider frequency range with low power consumption. Its 8051-compatible architecture supports familiar instruction set and peripheral conventions, easing firmware migration from suitable legacy 8051 products. Because it is specified as configurable and pin-compatible with traditional 12T 8051 devices, board-level compatibility depends on the selected package suffix, oscillator implementation, reset circuitry, and the exact functions assigned to shared pins.
Typical applications include electronic security systems, alarm panels, barcode readers, KVM controllers, industrial telephones, compact human-machine interfaces, and embedded IPC equipment. These systems benefit from the combination of 16 KB flash, 40 MHz processing capability, and a 2.4 V to 5.5 V supply range. The 44-pin PQFP format is particularly appropriate for volume-produced industrial and commercial control products that require a surface-mount assembly process.
Designers should verify oscillator, reset, and peripheral connections directly against the manufacturer datasheet before replacing an existing 12T 8051. The W78E054 family is pin-compatible with traditional 12T devices when the corresponding configuration and package are used, but firmware, memory, timing, and peripheral availability must also be reviewed. The W78E054D is currently marked Not Recommended for New Designs, so existing-product maintenance may be more appropriate than new platform selection.
This page combines verified manufacturer and distributor information with lifecycle context, application guidance, package constraints, and a strictly filtered drop-in comparison. It distinguishes confirmed W78E054D attributes from parameters that remain unavailable in the supplied source data, helping engineers evaluate procurement and redesign decisions without treating generic 8051 specifications as guaranteed W78E054DFG facts.
Alternativas drop-in para W78E054DFG — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
W78E052DFG
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →W78E054DFG Classificações máximas e características elétricas
| Microcontroller Type | 8-bit 8051-compatible microcontroller |
| Core Architecture | 8051 CISC |
| Maximum CPU Frequency | 40 MHz |
| Program Memory Type | Flash |
| Program Memory Size | 16 KB (16K x 8 bits) |
| Operating Voltage Range | 2.4 V to 5.5 V |
| Supported Supply Configurations | 2.5 V, 3.3 V, and 5 V |
| Faixa de temperatura de operação | -40°C to 85°C |
| Package Type | 44-pin PQFP |
| Tipo de montagem | Surface mount |
| Manufacturer Process Configuration | 6T or 12T configurable 8051 |
| Legacy Interface Compatibility | Pin-compatible with traditional 12T 8051 |
| Target Applications | Security, alarm, barcode reader, KVM, keypad phone, UI, and IPC |
| Lead-Free Status | Yes |
Guia de Configuração de Pinos do W78E054DFG 44-pin pqfp
Configuração de pinos para W78E054DFG (pacote 44-pin pqfp). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para W78E054DFG.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
W78E054DFG é adequado para 7 aplicaçãos: Security and Alarm Control, Barcode Reader Interface, KVM Controller, Keypad Telephone, Compact User Interface Controller, Embedded Industrial Control, Legacy 8051 Product Maintenance.
Security and Alarm Control
The W78E054DFG fits security panels because it combines an 8051-compatible processing core, 16 KB of flash, and operation from 2.4 V to 5.5 V. Nuvoton identifies security and alarm systems as target applications for the W78E054D family. A panel designer can use the MCU for keypad state machines, zone monitoring, event logging, relay decisions, and status-indicator control while retaining a familiar 8051 software environment. The 40 MHz maximum clock provides timing headroom for polling multiple inputs and coordinating alarm outputs. Before migration, verify the selected 12T-compatible configuration, oscillator arrangement, reset behavior, and any shared-pin assignments against the manufacturer datasheet.
Recomendado
Barcode Reader Interface
The W78E054DFG is suitable for a barcode-reader controller because its 8-bit 8051 architecture, 16 KB flash, and 40 MHz maximum frequency can handle scanning, decoding support, buffering, and user feedback in a compact embedded design. The 2.4 V to 5.5 V operating range also allows integration with systems using either 3.3 V or 5 V interface levels, provided individual pins remain within their electrical limits. The 44-pin PQFP package supports automated surface-mount assembly. Firmware development should confirm whether the chosen external-interface configuration depends on timers, UART resources, oscillator settings, or legacy 12T pin multiplexing that must be reproduced exactly.
Recomendado
KVM Controller
The W78E054DFG can serve as the control MCU in a keyboard-video-mouse switch because the W78E054D family is specifically listed for KVM applications. Its 8051-compatible instruction set supports established control firmware, while 16 KB of flash provides room for device tables, command handling, and configuration data. Operation up to 40 MHz helps the controller process switch commands and status updates, and the 2.4 V to 5.5 V supply range supports embedded industrial or commercial equipment. A replacement design must still verify the exact legacy 12T configuration, I/O assignments, timing, and package pinout; compatibility of the CPU family alone does not guarantee peripheral-level interchangeability.
Recomendado
Keypad Telephone
The W78E054DFG is appropriate for a keypad telephone controller because Nuvoton lists key phones among the W78E054D family's target applications. The 8-bit 8052-class processing capability can service keypad scanning, call-state logic, display sequencing, and communication handling, while 16 KB of flash supports compact embedded firmware. Its 2.4 V to 5.5 V operating range provides design flexibility for telephone-interface boards, and the 44-pin PQFP package is practical for production assembly. Engineers should validate line-interface voltage levels, oscillator stability, reset behavior, and peripheral pin assignments independently because those connector-specific requirements are not included in the verified product summary.
Recomendado
Compact User Interface Controller
The W78E054DFG can support a compact user interface in industrial panels, access terminals, and small IPC products. Its 8051-compatible core allows reuse of established menu and event-handling firmware, while 16 KB of flash and a 40 MHz maximum clock provide sufficient headroom for display updates, input polling, and local configuration. The wide 2.4 V to 5.5 V supply range permits integration across common embedded voltage domains. Because the supplied verified data does not list the complete peripheral complement, designers should confirm timer, serial, interrupt, and I/O requirements from the manufacturer datasheet before selecting the device for a new display-intensive platform.
Recomendado
Embedded Industrial Control
The W78E054DFG is suitable for compact industrial-control tasks because it operates from 2.4 V to 5.5 V across a -40°C to 85°C range and provides 16 KB of flash for embedded control firmware. Nuvoton identifies IPC equipment and other control-oriented uses as target applications. An engineer could place it in a small controller for sensor acquisition, discrete I/O, actuator sequencing, and local diagnostics, using the 40 MHz clock headroom for deterministic polling. The 44-pin PQFP package supports compact, repeatable assembly. Its NRND lifecycle status is the main qualification concern for new programs, so production use should include availability assurance and a reviewed second-source strategy.
Legacy 8051 Product Maintenance
The W78E054DFG is especially relevant to maintenance programs because Nuvoton describes the W78E054D as configurable and pin-compatible with traditional 12T 8051 devices. This characteristic can simplify board-level continuity when firmware and peripheral expectations are already based on a compatible 12T implementation. The MCU retains an 8-bit 8051-compatible core, supports 16 KB of flash, and operates to 40 MHz, providing enough performance for many embedded-control, alarm, and interface designs. Exact migration requires checking oscillator pins, reset polarity, port modes, memory organization, peripheral availability, timing, and the 44-pin PQFP footprint; pin compatibility should never be inferred from the family description alone.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para W78E054DFG — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | W78E052DFG |
|---|---|---|
| Package | 44-pin PQFP | 44-pin PQFP |
| Brand | Nuvoton Technology Corporation | Nuvoton Technology Corporation |
| Architecture | 8-bit 8051-compatible MCU | 8-bit 8051-family MCU |
Principais diferenciais
- 40 MHz maximum clock within an 8-bit 8051-compatible family (vs W78E052DFG)
- 16 KB flash memory in the 44-pin PQFP DFG configuration (vs W78E052DFG)
- Broad 2.4 V to 5.5 V operating range (vs W78E052DFG)
Notas de projeto
Do not treat generic 8051 pin compatibility as proof that every W78E054DFG board can be populated without review. Confirm the DFG package drawing, oscillator connection, reset polarity, port modes, interrupt inputs, and any multiplexed peripheral functions in the manufacturer datasheet. This check is especially important when replacing a traditional 12T 8051 because the W78E054D can be configured in 6T or 12T modes.
Route the 44-pin PQFP footprint from the official package drawing and preserve adequate assembly clearance around all four sides. Decoupling and clock components should be placed close to their associated pins, while reset and any externally switched oscillator components require short, clean traces. Because the verified excerpt does not provide the complete pin table or recommended layout, no component values or pad dimensions are asserted on this page.
Design the supply path for the full 2.4 V to 5.5 V operating range and verify every peripheral's input level rather than assuming all pins tolerate 5 V. Place local bypass capacitance at the supply entry and power pins according to the manufacturer layout guidance. The available data does not state the exact decoupling value, oscillator load capacitance, or absolute maximum ratings, so those values require direct datasheet confirmation.
The W78E054D family is marked Not Recommended for New Designs. For an existing product, preserve the approved firmware, oscillator configuration, and peripheral assignments. For a new program, obtain written lifecycle and supply assurance from Nuvoton or an authorized distributor and evaluate a planned migration before committing production tooling, particularly because the supplied substitute search found no verified cross-manufacturer drop-in replacement.
Informações de conformidade
Mouser identifies the W78E054DFG as Pb-free. No explicit RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 declaration was included in the verified data. AEC-Q100 is marked not_applicable because the family is an industrial 8051 MCU rather than an identified automotive-qualified variant.
