XA3S100E-4TQG144Q - Automotive Spartan-3E FPGA | AMD Xilinx
N.º da peça: XA3S100E-4TQG144Q ✓ AtivoXA3S100E-4TQG144Q Visão geral
An FPGA is a programmable semiconductor device whose digital logic, interconnect, and embedded resources can be configured after fabrication. In the device hierarchy, an FPGA sits below programmable logic systems and above fixed-function ASICs, offering a middle ground between flexible development and the unit cost of a mask-programmed custom device. The Spartan-3E family combines configurable logic blocks, dedicated memory, digital clock management resources, and programmable I/O in a single package.
Key features include 2,160 logic cells, 108 user I/O, a maximum internal frequency of 572 MHz, 90 nm CMOS implementation, and an AEC-Q100-qualified automotive profile. The -4 speed designation identifies the performance grade, while Q indicates the automotive temperature qualification. These characteristics make the XA3S100E-4TQG144Q useful where field programmability, controlled lifecycle qualification, and a moderate logic-resource requirement are more important than the very high capacity of larger FPGAs.
The device is intended for embedded automotive electronics that require deterministic configuration, flexible I/O, and upgradeable control logic. Typical uses include body and chassis control modules, motor and valve controllers, sensor fusion front ends, gateway interfaces, instrument-cluster sub-systems, and auxiliary automotive controllers. The 108 I/O count supports connections to sensors, communication transceivers, display or diagnostic interfaces, and discrete actuators.
Designers should account for the package's 144-pin TQFP footprint, power-decoupling requirements, configuration interface, clocking, I/O standards, and automotive environmental qualification. Use the manufacturer's pin-description table and device-specific power, configuration, and timing documentation when assigning PCB tracks and selecting bank power. The -4 speed grade and Q temperature grade should be preserved when the PCB is designed for replacement flexibility.
This page combines the device's automotive FPGA specifications, qualified sourcing information, practical application guidance, and same-package replacement analysis to support engineering decisions from initial architecture through production sourcing. The Request a Quote form on this page can be used to confirm current availability, price, and lead time without relying on a static price table.
Alternativas drop-in para XA3S100E-4TQG144Q — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XA3S100E-4TQG144Q (mesmo formato e footprint) — diferindo em System Gates, Package, Automotive Qualification, Device Type, Logic Blocks.
XA3S100E-4TQG144I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S100E-4TQ144I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC3S100E-4TQ144C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XA3S200-4TQG144Q
✅ Drop-InConsulte o preço
XA3S100E-4TQ144C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XA3S100E-4TQG144Q Classificações máximas e características elétricas
| Product Type | Automotive Spartan-3E field-programmable gate array (FPGA) |
| System Gates | 100,000 equivalent gates |
| Logic Cells | 2,160 logic cells |
| Logic Blocks | 240 CLBs |
| User I/O | 108 I/O |
| Maximum Internal Frequency | 572 MHz |
| Combinatorial CLB Delay | 4.88 ns maximum |
| Process Technology | 90 nm CMOS |
| Tensão de alimentação | 1.2 V core |
| Encapsulamento | 144-pin TQFP |
| Package Type | 144-LQFP |
| Temperatura de operação | -40°C to +125°C junction temperature for Q grade |
| Speed Grade | -4 |
| Automotive Qualification | AEC-Q100 device qualification |
| Production Support | Full production part approval process (PPAP) documentation support |
| Tipo de montagem | Surface mount |
| Programmability | Field-programmable logic and I/O |
| Lead-Free Status | Lead-free |
| Device Series | XA Spartan-3E |
Guia de Configuração de Pinos do XA3S100E-4TQG144Q 144-lqfp
Configuração de pinos para XA3S100E-4TQG144Q (pacote 144-lqfp). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XA3S100E-4TQG144Q.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XA3S100E-4TQG144Q é adequado para 6 aplicaçãos: Automotive Body Control Module, Vehicle Sensor Interface, Automotive Communication Gateway, Motor and Actuator Controller, Instrument and Display Sub-System, Programmable Automotive Logic Platform.
Automotive Body Control Module
The XA3S100E-4TQG144Q fits body-control logic that coordinates door, lighting, wiper, latch, and diagnostic functions. Its 2,160 logic cells provide capacity for state machines, debouncing, event routing, and communication supervision, while 108 I/O support discrete sensors, switches, relays, and bus transceivers. The -4 speed grade supports deterministic control-loop execution, and Q-grade operation from -40°C to +125°C junction temperature supports harsh vehicle environments. Field programmability permits diagnostics and firmware updates without changing the hardware. The main design consideration is preserving deterministic timing and ensuring that every I/O bank uses power and voltage standards compatible with the selected external transceiver.
Recomendado
Vehicle Sensor Interface
The XA3S100E-4TQG144Q is suitable for conditioning and coordinating signals from pressure, temperature, position, and current sensors. Its 108 I/O can support digital sensor inputs, fault lines, and actuator-control outputs, while programmable logic can implement filtering, diagnostics, range checking, and fallback behavior. The 572 MHz maximum internal frequency provides ample timing margin for protocol engines and sampling pipelines, subject to actual routing and timing analysis. Q-grade qualification and the extended temperature range are important for modules installed near the engine bay, chassis, or exterior vehicle locations. Validate input thresholds, isolation requirements, and grounding in the final wiring environment.
Recomendado
Automotive Communication Gateway
The XA3S100E-4TQG144Q can implement protocol bridging, message routing, diagnostic logging, and security-related control logic in an automotive gateway or body-network node. Its programmable architecture supports multiple interface standards and allows protocol updates after vehicle launch. The 108 I/O and 2,160 logic cells are well matched to moderate gateway functions, while the 144-pin TQFP package supports compact surface-mount assemblies. The Q-grade profile is useful for temperature-varying vehicle locations, but system timing and signal integrity still depend on transceiver selection, termination, routing, and clocking. Use the manufacturer's I/O and timing documentation for each supported I/O standard.
Recomendado
Motor and Actuator Controller
The XA3S100E-4TQG144Q can coordinate stepper-motor, solenoid, pump, and valve control stages in cost-sensitive automotive electronics. Parallel I/O can generate control signals, capture position feedback, and supervise overcurrent or timeout conditions, while programmable logic can implement acceleration profiles, closed-loop sequencing, and fault diagnostics. The -4 speed grade and 572 MHz maximum internal frequency support demanding timing architecture, although final performance depends on routing and I/O timing. Its Q-grade temperature and automotive qualification features make it preferable to commercial alternatives for harsh installations. Include hardware shutdown paths so a processor or FPGA fault cannot leave an actuator continuously energized.
Recomendado
Instrument and Display Sub-System
The XA3S100E-4TQG144Q is appropriate for display sequencing, warning-indicator control, keypad scanning, and diagnostics in an automotive instrument sub-system. Its 108 I/O can connect display segments, indicator drivers, switches, and communication devices, while configurable logic can implement refresh timing and debounce functions. The 144-pin TQFP package offers a practical route-density option for multilayer automotive boards, and the -4 speed grade supports flexible timing. Q-grade operation supports cabin and dashboard environments with wide temperature variation. Verify display voltage levels, drive-current limits, and grounding against the manufacturer's I/O guidance before finalizing the board.
Recomendado
Programmable Automotive Logic Platform
The XA3S100E-4TQG144Q works well as a compact programmable logic platform for consolidating small control functions that would otherwise require multiple fixed-function devices. It can combine protocol conversion, timing generation, data formatting, fault management, and interface bridging in one package. Programmable nonvolatile configuration permits design revisions during vehicle development and end-of-line updates without a PCB respin. The 100,000-equivalent-gate and 2,160-logic-cell resources align with moderate control logic, while 108 I/O provide interface capacity. For safety-related functions, confirm the applicable automotive qualification, failure-rate, diagnostic, and organizational process requirements before relying on the FPGA for that role.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XA3S100E-4TQG144Q — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XA3S100E-4TQG144I | XC3S100E-4TQ144I | XC3S100E-4TQ144C | XA3S200-4TQG144Q | XA3S100E-4TQ144C |
|---|---|---|---|---|---|---|
| Package | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP | 144-pin TQFP |
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| Device Family | XA Spartan-3E | XA Spartan-3E | Spartan-3E | Spartan-3E | XA Spartan-3E | Spartan-3E |
| Equivalent System Gates | 100,000 equivalent gates | 100,000 equivalent gates | 100,000 equivalent gates | 100,000 equivalent gates | 200,000 equivalent gates | 100,000 equivalent gates |
| Logic Cells | 2,160 logic cells | 2,160 logic cells | 2,160 logic cells | 2,160 logic cells | 4,320 logic cells | 2,160 logic cells |
| User I/O | 108 I/O | 108 I/O | 108 I/O | 108 I/O | 108 I/O | 108 I/O |
| Maximum Internal Frequency | 572 MHz | 572 MHz | 572 MHz | 572 MHz | 572 MHz | 572 MHz |
| Speed Grade | -4 | -4 | -4 | -4 | -4 | -4 |
| Temperature / Qualification Profile | Q grade, -40°C to +125°C junction temperature, AEC-Q100 qualification support | I grade, reduced temperature range | Commercial XC qualification profile | Commercial XC qualification profile | Q grade, -40°C to +125°C junction temperature, AEC-Q100 qualification support | Commercial qualification profile |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
Principais diferenciais
- Maintains the full automotive temperature qualification profile (vs XA3S100E-4TQG144I)
- Preserves automotive qualification for production programs (vs XC3S100E-4TQ144I)
- Targets moderate logic capacity without a larger device (vs XA3S200-4TQG144Q)
Notas de projeto
Use the manufacturer's 144-pin TQFP land pattern and pin-description table as the controlling PCB reference. Keep configuration pins, clock inputs, power pins, and ground pins in the locations assigned by the pinout; rotating or rearranging those functions can prevent startup or degrade signal integrity. Confirm courtyard clearance, solder-mask geometry, and assembly tolerances against the current package drawing before releasing the PCB footprint.
Place the required core and I/O-bank decoupling capacitors close to their associated supply pins, with the shortest possible return path to ground planes. Follow the manufacturer's recommended capacitance, voltage rating, and ESR guidance for the selected configuration method. Do not assume that a generic capacitor selection is sufficient: automotive power systems can combine load dump, conducted transient, and temperature requirements with sensitive FPGA supply rails.
Route clocks and high-speed interfaces with controlled impedance, continuous reference planes, and avoidance of unnecessary stubs. Place series termination where the device and board-level signal-integrity analysis require it. For external automotive transceivers, keep the FPGA interface short, maintain a continuous ground reference, and isolate noisy power and switching-current paths from sensitive configuration and clock networks.
Do not substitute a commercial XC3S100E or an I-grade XA device without checking the full production qualification. The target's Q-grade suffix supports -40°C to +125°C junction operation and AEC-Q100 qualification, while lower-grade alternatives can change the acceptable environment or approval basis. Also verify that an FPGA-based replacement uses the same configuration interface, pin functions, I/O standards, and timing constraints.
Estimated thermal analysis is required for each PCB implementation because junction temperature depends on actual switching activity, package dissipation, copper area, ambient temperature, and airflow; no board-specific thermal result can be assigned without those inputs. Use the manufacturer's power and thermal data for conservative estimates, provide solid ground-plane copper beneath the device, and minimize thermal spreading resistance to board copper.
Informações de conformidade
The manufacturer datasheet identifies AEC-Q100 device qualification support and a lead-free package. RoHS, REACH, halogen-free, and conflict-minerals declarations are not established by the cited device documentation.