XC3S250E-4TQ144C - 250K Spartan-3E FPGA | AMD | LQFP-144
N.º da peça: XC3S250E-4TQ144C ✗ Fim de vidaXC3S250E-4TQ144C Visão geral
A field-programmable gate array is a semiconductor in which the digital logic, interconnect, and selected input/output functions are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, above individual logic gates and below application-specific programmable devices. Spartan-3E devices combine configurable logic blocks, embedded block RAM, dedicated multipliers, and programmable I/O in a single package.
The XC3S250E-4TQ144C provides 221,184 bits of RAM and 108 I/Os in a 22 x 22 mm TQFP-144 package with a 0.5 mm lead pitch. Its 250K logic density and 144-pin footprint make it useful for embedded control, communications, instrumentation, and general digital signal-processing designs. The -4 suffix identifies the device speed grade, while the final C character identifies the commercial temperature option used in the ordering code.
Spartan-3E devices combine programmable logic with dedicated arithmetic and memory resources. The 612 CLBs supply the configurable fabric, while the 5,508-cell count and 250,000-gate rating describe the device's nominal logic capacity. The 108 available I/Os support external interfaces, subject to the voltage, timing, and pin constraints defined for the selected configuration. The 1.2 V core technology supports higher system performance than older FPGA generations while retaining a familiar 144-pin surface-mount footprint.
Typical applications include industrial control modules, sensor and instrumentation interfaces, serial data acquisition, embedded communications, and compact control logic. The available I/O count can support multiple parallel buses, serial transceivers, status indicators, and external memory interfaces when the design's pin constraints are respected. The 572 MHz listed device performance also makes the part suitable for pipeline-oriented logic and fixed-function signal processing implemented in programmable logic.
Designers should treat the XC3S250E-4TQ144C as a legacy Spartan-3E device and verify toolchain availability, bitstream support, and the required I/O standard against the complete AMD/Xilinx documentation before committing a new production design. PCB layouts should follow the manufacturer's 144-pin package drawing, including power and ground distribution, decoupling, and signal-routing guidance.
This page combines the XC3S250E-4TQ144C ordering information, architecture specifications, drop-in alternatives, application guidance, and package-aware comparison information to support engineering selection and sourcing decisions.
Alternativas drop-in para XC3S250E-4TQ144C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
XC3S250E-4TQG144C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S250E-4TQG144I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3S250E-5TQG144C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3S250E-3TQG144C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3S250E-2TQG144C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3S250E-4TQ144C Classificações máximas e características elétricas
| Device Type | Spartan-3E field-programmable gate array |
| Logic Gates | 250,000 gates |
| Configurable Logic Cells | 5,508 cells |
| Configurable Logic Blocks | 612 CLBs |
| Total RAM | 221,184 bits |
| User I/O | 108 I/Os |
| Listed Maximum Frequency | 572 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Encapsulamento | 144-pin LQFP/TQFP |
| Package Body Size | 22 x 22 mm |
| Lead Pitch | 0.5 mm |
| Package Height | 1.6 mm |
| Tipo de montagem | Surface mount |
| Speed Grade | -4 |
| Ordering Temperature Designator | C, commercial grade |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
Guia de Configuração de Pinos do XC3S250E-4TQ144C 1.6 mm
Configuração de pinos para XC3S250E-4TQ144C (pacote 1.6 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC3S250E-4TQ144C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC3S250E-4TQ144C é adequado para 6 aplicaçãos: Industrial Control Logic, Sensor and Instrumentation Interface, Serial Communication Bridge, Digital Signal Processing, Data Acquisition and Storage Control, Legacy Platform Extension.
Industrial Control Logic
The XC3S250E-4TQ144C fits compact machine-control systems requiring deterministic programmable logic, multiple external interfaces, and modest on-board memory. Its 5,508 configurable cells and 612 CLBs can implement sequencing, state machines, interlocks, counters, and control protocols, while 108 I/Os support encoders, limit switches, actuator outputs, and service communications. The 572 MHz listed device performance provides margin for pipelined control paths, although final timing must be checked for the selected I/O standards and PCB. The 144-pin LQFP/TQFP package is particularly useful when maintaining an existing industrial control-board footprint is more important than using the smallest possible package.
Recomendado
Sensor and Instrumentation Interface
XC3S250E-4TQ144C is useful for acquiring and conditioning parallel sensor data in instrumentation designs. The 108 I/Os can connect counters, multiplexers, amplifiers, latches, and serial-to-parallel converters, while 221,184 RAM bits provide buffer and storage resources for sampled data. A 572 MHz internal clock rating supports timed sampling and digital filtering without relying on a microcontroller for every operation. Engineers should assign pins according to the DS312 package table and budget the I/O standard, drive strength, and timing requirements of each external instrument. Local decoupling and short routes to the FPGA supply pins are important for reliable sampling behavior.
Recomendado
Serial Communication Bridge
The XC3S250E-4TQ144C can implement protocol converters, UART bridges, packetizers, and interface controllers when a system needs customizable logic rather than a fixed serial controller. Its 612 CLBs and 221,184 RAM bits can support transmit and receive buffers, clock-domain crossing logic, framing, filtering, and error detection. The 108 I/Os provide parallel connections to transceivers, memories, and host processors. For reliable bridges, constrain all timing-critical paths and use the appropriate I/O standard for each external interface. The architecture is especially useful in legacy equipment where a new board must reproduce an established 144-pin programmable-logic footprint.
Recomendado
Digital Signal Processing
XC3S250E-4TQ144C supports fixed-function digital signal processing through programmable logic, including filters, counters, correlators, waveform generation, and data-format conversion. The 250,000-gate device provides enough configurable resources for parallel pipelines, while the listed 572 MHz frequency enables pipelined arithmetic rather than long combinational paths. Block RAM can be used for coefficients, delay lines, and sample buffers. Timing closure should be evaluated with realistic constraints, and arithmetic-heavy pipelines should include pipeline registers to improve clock margin. The 144-pin package also leaves 108 user I/Os for converter data, control signals, and digital interfaces in a compact embedded subsystem.
Recomendado
Data Acquisition and Storage Control
XC3S250E-4TQ144C can coordinate data acquisition, buffering, and transfer between an ADC, memory, and host interface. Its 108 I/Os support wide parallel data buses, while 221,184 RAM bits and the programmable fabric can implement FIFO logic, address generation, packing, and timing sequences. The 612 CLBs allow acquisition engines and control functions to share one device without relying on a separate microcontroller. Validate bus timing with the selected external-device specifications and add pipeline registers where the FPGA boundary must meet aggressive setup and hold requirements. The 144-pin surface-mount package supports compact acquisition boards with moderate connector and memory requirements.
Recomendado
Legacy Platform Extension
XC3S250E-4TQ144C is well suited to expanding legacy platforms that already use a 144-pin Spartan-3E footprint and require programmable logic for protocol adaptation, status decoding, or accelerator functions. A replacement or board refresh can preserve the established mechanical interface while adding configurable logic around existing processors, memories, and transceivers. Designers must confirm bitstream compatibility, configuration method, I/O standards, and the supported version of the Spartan-3E design tools. Because the product is from a mature device family, production planning should include lifecycle review and an approved sourcing path. Electrical and layout decisions should follow the DS312 package and power guidance rather than assumptions based on newer FPGA families.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC3S250E-4TQ144C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC3S250E-4TQG144C | XC3S250E-4TQG144I | XC3S250E-5TQG144C | XC3S250E-3TQG144C | XC3S250E-2TQG144C |
|---|---|---|---|---|---|---|
| Package | 144-LQFP/TQFP | 144-LQFP/TQFP | 144-LQFP/TQFP | 144-LQFP/TQFP | 144-LQFP/TQFP | 144-LQFP/TQFP |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Logic Gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates | 250,000 gates |
| Configurable Logic Cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells | 5,508 cells |
| Configurable Logic Blocks | 612 CLBs | 612 CLBs | 612 CLBs | 612 CLBs | 612 CLBs | 612 CLBs |
| Total RAM | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits | 221,184 bits |
| User I/O | 108 I/Os | 108 I/Os | 108 I/Os | 108 I/Os | 108 I/Os | 108 I/Os |
| Speed Grade | -4 | -4 | -4 | -5 | -3 | -2 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Temperature Designator | C | C | I | C | C | C |
Principais diferenciais
- Closest documented ordering-code alternative preserves the complete listed core configuration (vs XC3S250E-4TQG144C)
- Temperature-designator option supports temperature-sensitive sourcing plans (vs XC3S250E-4TQG144I)
- A higher speed grade is available without changing the 144-pin footprint (vs XC3S250E-5TQG144C)
Notas de projeto
Use the AMD/Xilinx 144-pin package drawing and DS312 pinout table as the authority for land pattern, pin-one orientation, exposed connections, and recommended copper clearance. Route each supply and ground plane to minimize loop area, place decoupling capacitors at the corresponding power pins, and preserve the package's recommended thermal-via pattern. Confirm the exact suffix on the assembly drawing because legacy package-ordering codes must not be treated as mechanically identical without comparison.
Assign high-speed clock and data pins according to the Spartan-3E bank and I/O constraints, and use the DS312 package table together with the selected I/O standard. Differential pairs, series-terminated outputs, and clock inputs require trace geometry consistent with the selected PCB stack-up. Avoid routing sensitive signals adjacent to switching power nodes, and validate external interface timing with realistic clock and I/O timing constraints rather than relying only on the device's headline frequency.
Calculate power from the actual utilization, switching activity, I/O state, and supply voltage using the AMD/Xilinx Spartan-3E power-estimation methodology. Provide separate, well-decoupled connections for the core and auxiliary supplies identified in the device documentation. Do not use a generic XC3S250E board without checking pin assignments, because output standards and auxiliary-power requirements can differ between legacy package suffixes.
A drop-in decision requires matching more than gate count: confirm the 144-pin mechanical footprint, pin assignments, I/O standards, core voltage, configuration method, speed grade, temperature grade, and the supported synthesis and bitstream toolchain. For production continuity, also record the exact ordering code and lifecycle plan in the approved-vendor list. The C and I suffixes must not be substituted when the product's environmental requirements differ.
Informações de conformidade
The component is an FPGA, and no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. The commercial-grade C suffix is not an automotive qualification statement.