XC3S400-5FGG320C - 400K Spartan-3 FPGA | AMD | 320-FBGA
N.º da peça: XC3S400-5FGG320C ✗ Fim de vidaXC3S400-5FGG320C Visão geral
A field-programmable gate array is a semiconductor device whose digital logic and interconnect are configured after manufacture. The Spartan-3 FPGA family occupies the FPGA hierarchy alongside CPLDs, programmable logic devices, and application-specific programmable logic. The XC3S400 combines 8,064 configurable logic cells with 221 I/O sites, allowing control, data acquisition, communications, signal processing, and interface logic to be consolidated in one device.
Principal characteristics include a 725 MHz maximum clock, a 1.14 V to 1.26 V core-voltage range, 221 inputs and 221 outputs, 90 nm process technology, and a commercial temperature range of 0°C to 85°C. The “-5” suffix identifies the high-performance speed grade, while the 320-FBGA package supports compact, high-density PCB layouts through fine-pitch ball-grid connectivity.
The 400K device provides substantially more configurable logic than smaller Spartan-3 members while retaining the architecture’s emphasis on cost-sensitive implementation. Its 221 I/O sites offer a broad interface budget for external memories, parallel buses, counters, control signals, and mixed peripheral functions. Clock, configuration, power, and decoupling requirements must still be implemented according to the manufacturer’s device guidance, especially because the large BGA footprint demands careful escape routing and thermal analysis.
Typical applications include industrial control equipment, communications infrastructure, data-acquisition systems, embedded video processing, test-and-measurement instruments, and cost-sensitive consumer electronics. In each case, the device is valuable where parallel logic and numerous external connections are required but a higher-density or more highly integrated FPGA would add unnecessary cost or complexity.
PCB design should account for the 19 mm by 19 mm 320-FBGA land pattern, differential-pair geometry, power-plane continuity, via access, and the electrical requirements of the 1.2 V core. Designers should use the exact package drawings and pin definitions from the AMD DS099 family datasheet rather than infer ball assignments from another Spartan-3 package.
This page combines device specifications, same-package migration options, practical PCB guidance, and application-oriented selection criteria. It supports engineers who need to evaluate the XC3S400-5FGG320C for an existing 320-FBGA design, compare it with lower-speed or Spartan-3A options, or plan a controlled legacy FPGA migration without overlooking package and temperature-grade differences.
Alternativas drop-in para XC3S400-5FGG320C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC3S400-5FGG320C (mesmo formato e footprint) — diferindo em Mounting Type, Package, User I/O Count.
XC3S400-4FGG320C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S400-4FG320I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC3S400-5FGG320I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC3S400-4FGG320I
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC3S400A-5FGG320C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC3S400-5FGG320C Classificações máximas e características elétricas
| Product Type | Spartan-3 field-programmable gate array |
| System Gates | 400,000 gates |
| Logic Cells | 8,064 cells |
| Frequência máxima de clock | 725 MHz |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| Nominal Core Voltage | 1.2 V |
| User I/O Count | 221 I/O |
| Input Count | 221 inputs |
| Output Count | 221 outputs |
| Process Technology | 90 nm |
| Encapsulamento | 320-FBGA, 19 mm × 19 mm |
| Terminal Count | 320 terminals |
| Faixa de temperatura de operação | 0°C to 85°C |
| Speed Grade | -5 |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do XC3S400-5FGG320C 320-fbga, 19 mm × 19 mm
Configuração de pinos para XC3S400-5FGG320C (pacote 320-fbga, 19 mm × 19 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC3S400-5FGG320C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC3S400-5FGG320C é adequado para 6 aplicaçãos: Industrial Control and Automation, Data-Acquisition and Signal Conditioning, Communications Infrastructure, Test and Measurement Equipment, Embedded Video and Display Processing, Cost-Sensitive Consumer and Embedded Products.
Industrial Control and Automation
The XC3S400-5FGG320C fits industrial controllers that combine machine sequencing, digital I/O, communications, and data handling in one programmable device. Its 8,064 logic cells provide substantial parallel processing capacity, while 221 user I/Os support sensors, actuators, interlocks, counters, and bus transceivers. The 725 MHz maximum clock provides additional timing margin for multi-cycle state machines and interface logic. The commercial 0°C to 85°C rating is appropriate where the enclosure remains within that range. A new design should also assess whether a currently supported FPGA family offers better long-term sourcing without requiring a major redesign.
Recomendado
Data-Acquisition and Signal Conditioning
The XC3S400-5FGG320C is suitable for parallel data-acquisition front ends that must connect converters, memory devices, counters, and digital processing engines. Its 221 inputs and 221 outputs provide more interface capacity than many low-end programmable logic devices, and the 8,064 logic cells can support acquisition control, channel sequencing, filtering, and buffer management. The 1.2 V core operates from a specified 1.14 V to 1.26 V range. Engineers should assign pins according to the manufacturer’s I/O standards and verify acquisition timing rather than assuming that the 725 MHz headline clock applies directly to every external interface.
Recomendado
Communications Infrastructure
XC3S400-5FGG320C can implement protocol conversion, framing, buffering, and low-speed network control in communications equipment. The 400K-gate Spartan-3 architecture provides 8,064 configurable logic cells and 221 I/Os, allowing parallel interfaces and control functions to be consolidated without adding a separate high-performance processor. The -5 grade offers a stated 725 MHz maximum clock for timing-critical datapaths. For deployed line cards, engineers should review I/O voltage, termination, clock jitter, and signal-integrity requirements in addition to selecting a package-compatible alternative.
Recomendado
Test and Measurement Equipment
The XC3S400-5FGG320C is appropriate for instrument control logic that coordinates acquisition, timing, calibration, and data transfer. Its 8,064 logic cells and 221 I/Os can support counters, trigger logic, instrument handshakes, display interfaces, and storage-control functions. The 725 MHz -5 speed grade can benefit precision timing paths, although external instrument interfaces often have lower bandwidth and must be assessed independently. Layout work should preserve clock integrity and provide robust power distribution across the 19 mm by 19 mm 320-FBGA device.
Recomendado
Embedded Video and Display Processing
XC3S400-5FGG320C can serve as a cost-effective parallel video and display controller when the design does not require the resources of a larger FPGA. Its 221 I/Os allow connection to external memory, digital display interfaces, timing generators, and control peripherals, while 8,064 logic cells support raster timing, overlays, and pixel-pipeline control. The 725 MHz clock grade can support demanding internal timing, but video standards impose specific pixel-clock and I/O requirements. Pin assignment and board-level signal integrity should follow the package-specific AMD guidance rather than generic FPGA assumptions.
Recomendado
Cost-Sensitive Consumer and Embedded Products
The XC3S400-5FGG320C fits compact embedded products that need configurable logic, parallel interfaces, and modest storage control without moving to a high-end FPGA. The original Spartan-3 family was designed for high-volume, cost-sensitive applications, and the device combines 400,000 system gates with a 1.2 V core in a compact 320-FBGA package. The 725 MHz maximum clock provides generous headroom for control and interface logic. For new consumer launches, the engineering team should balance board-level BGA complexity and legacy availability against simpler CPLDs or currently supported FPGA families.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC3S400-5FGG320C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC3S400-4FGG320C | XC3S400-4FG320I | XC3S400-5FGG320I | XC3S400-4FGG320I | XC3S400A-5FGG320C |
|---|---|---|---|---|---|---|
| Package | 320-FBGA (19x19 mm) | 320-FBGA (19x19 mm) | 320-FBGA (19x19 mm) | 320-FBGA (19x19 mm) | 320-FBGA (19x19 mm) | 320-FBGA (19x19 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3A |
| Speed Grade | -5 | -4 | -4 | -5 | -4 | -5 |
| Logic Capacity | 8,064 cells | 8,064 cells | 8,064 cells | 8,064 cells | 8,064 cells | 368,640 logic elements |
| User I/O Count | 221 I/O | 221 I/O | 221 I/O | 221 I/O | 221 I/O | 251 I/O |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
Principais diferenciais
- Higher speed grade within the original XC3S400 family (vs XC3S400-4FGG320C)
- Commercial temperature grade with the same -5 performance class (vs XC3S400-4FGG320I)
- Original Spartan-3 resource and interface profile (vs XC3S400A-5FGG320C)
Notas de projeto
Use the AMD 320-FBGA package drawing and exact XC3S400 ball map when creating the PCB footprint. Place decoupling and power-connection vias close to the relevant balls, preserve uninterrupted reference planes for the 1.2 V core, and route configuration and clock signals away from high-current switching nodes. The 19 mm by 19 mm BGA requires careful escape routing, so verify assembly-process capabilities and land-pattern tolerances before release.
Clock and high-speed interface routing should use short, topology-controlled paths with return-current continuity. For the XC3S400-5FGG320C, the 725 MHz value is a device timing specification rather than permission to omit source termination or impedance control. Use the pin-specific I/O standards and timing tables from DS099, and analyze external memory or video interfaces separately from the internal fabric.
Do not treat every 320-BGA Spartan-3 device as automatically interchangeable with XC3S400-5FGG320C. The original Spartan-3 and Spartan-3A families can have different I/O counts and configuration behavior. Before substituting XC3S400-4FGG320C, XC3S400A-5FGG320C, or a temperature-grade variant, verify the ball map, pinout, I/O standards, voltage tolerances, configuration interface, and timing closure.
Informações de conformidade
No specific RoHS, REACH, halogen-free, or conflict-minerals declaration was identified for this exact legacy MPN. The device is a commercial-temperature FPGA rather than an AEC-Q100-qualified automotive part.