XC4VLX15-10SF363I - 13,824-Cell FPGA | AMD Xilinx | Industrial
N.º da peça: XC4VLX15-10SF363I ✗ Fim de vidaXC4VLX15-10SF363I Visão geral
A field-programmable gate array is a semiconductor device containing configurable logic and interconnect resources. An FPGA sits within the broader hierarchy of programmable-logic semiconductors, combining the parallel performance of hardware with firmware-like design flexibility. The Virtex-4 LX family uses 90 nm CMOS construction and is positioned between general-purpose FPGAs and larger high-performance programmable-logic devices. This makes the XC4VLX15 useful where parallel datapaths, high-speed interface termination, protocol handling, or fixed-function acceleration must coexist on one device.
The XC4VLX15 device contains 13,824 logic cells. The same-family documentation identifies 864 Kb of block RAM and 32 DSP slices for the Virtex-4 LX 15 configuration. These resources allow designers to implement parallel filters, control logic, packet processing, signal transformation, and interface bridges in hardware. Block RAM can store lookup tables, packet buffers, or fixed coefficients, while the DSP slices can accelerate multiply-accumulate operations commonly found in digital filtering, signal processing, and fixed-point arithmetic.
The “-10” portion identifies speed grade 10, allowing the design to meet the timing requirements associated with that performance class. The device operates from a 1.2 V supply and uses a 363-ball FCBGA package with a reported 0.8 mm ball pitch. Its large BGA land pattern supports numerous high-speed I/O connections, but it also requires careful PCB routing, controlled-reference-plane design, thermal analysis, and assembly-process compatibility. The industrial “I” suffix distinguishes this ordering variant from commercial-temperature variants, while the “SF” ordering code identifies the package and finish configuration used by the device family.
Typical applications include industrial control systems, communications infrastructure, video-processing equipment, instrumentation, and embedded signal-processing systems. In each case, the device can consolidate multiple fixed-function blocks into a single programmable platform. Designers can use serial or parallel interfaces to connect processors, memory, converters, and network transceivers, while programmable logic handles protocol conversion, data alignment, buffering, and real-time control. This integration can reduce component count and simplify system architecture when requirements are stable enough to justify programmable logic.
The primary design trade-off is package complexity. A 363-pin FCBGA requires a fine-pitch multilayer PCB, suitable solder-mask and paste design, X-ray or other assembly inspection, and careful handling of thermal expansion. Signal-integrity work is equally important because high-speed I/O performance can be affected by return paths, impedance discontinuities, supply noise, and inadequate decoupling. Use the manufacturer’s device pinout, package data, and PCB design guidance when defining the land pattern, power planes, and assembly process.
This product record combines the confirmed XC4VLX15-10SF363I device identity, package information, logic-cell count, process technology, supply voltage, and available drop-in ordering variants with practical guidance for FPGA selection, PCB implementation, sourcing, and system integration.
Alternativas drop-in para XC4VLX15-10SF363I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC4VLX15-10SF363I (mesmo formato e footprint) — diferindo em Device Type, Package, Speed Grade.
XC4VLX15-10SFG363I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC4VLX15-10SF363C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX15-11SFG363C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC4VLX15-12SF363C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC4VLX15-10SF363I Classificações máximas e características elétricas
| Device Type | Virtex-4 LX FPGA |
| Logic Cells | 13,824 cells |
| FPGA Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | 10 |
| Encapsulamento | 363-pin FCBGA |
| Package Dimensions | 17 mm × 17 mm |
| Ball Pitch | 0.8 mm |
| Block RAM | 864 Kb |
| DSP Slices | 32 |
| Number of Pins or Balls | 363 |
| Tipo de montagem | Surface mount |
| Temperature Grade | Industrial |
Guia de Configuração de Pinos do XC4VLX15-10SF363I 17 mm × 17 mm
Configuração de pinos para XC4VLX15-10SF363I (pacote 17 mm × 17 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC4VLX15-10SF363I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC4VLX15-10SF363I é adequado para 6 aplicaçãos: Industrial Control and Automation, Industrial Networking Equipment, Video and Image Processing, Digital Signal Processing, Test and Measurement Instrumentation, Communications and Protocol Conversion.
Industrial Control and Automation
The XC4VLX15-10SF363I fits industrial control systems that need deterministic parallel logic beside a host processor. Its 13,824 logic cells can implement state machines, interlocks, motion-command decoding, fault handling, and I/O conditioning, while the 32 DSP slices can support filtering or proportional-control calculations. The 90 nm FPGA fabric also allows timing-critical operations to execute concurrently without software jitter. In a controller, the device could collect sensor data through parallel interfaces, validate timing and limits, generate actuator commands, and provide a hardware watchdog. The 363-pin FCBGA offers many I/O connections, but the design must provide controlled-impedance routing, continuous return paths, decoupling, and an assembly process qualified for the 0.8 mm ball pitch.
Recomendado
Industrial Networking Equipment
The XC4VLX15-10SF363I can consolidate packet framing, protocol conversion, queue management, and interface adaptation in industrial networking equipment. Its 13,824 logic cells provide parallel resources for packet classification, checksum generation, address filtering, and backpressure handling, while 864 Kb of block RAM supports modest packet buffering and descriptor storage. The device can sit between a host processor and one or more physical-layer interfaces, reducing reliance on software for time-critical traffic. Because networking links may require deterministic latency, place the FPGA in the critical data path and use block RAM for fixed-depth buffering to prevent unbounded latency. Board-level signal integrity remains essential: route high-speed interfaces over continuous reference planes and verify impedance, skew, and power-return continuity in the 363-FCBGA implementation.
Recomendado
Video and Image Processing
The XC4VLX15-10SF363I is suitable for parallel video and image-processing blocks that benefit from hardware pipelines. Its 13,824 logic cells can implement timing generators, pixel-format conversion, color processing, and control logic, while the 32 DSP slices can accelerate multiply-accumulate operations used in filtering and arithmetic transforms. A practical architecture would divide a video stream into tiles, process each tile through parallel pipelines, and transfer the result to frame memory or a display interface. Using dedicated logic instead of a CPU keeps pixel throughput predictable and reduces software overhead. The FCBGA package provides a high pin count for parallel pixel buses and control signals, although simultaneous high-speed switching requires disciplined layer-stackup selection, matched impedance, return-path continuity, and locally effective power and ground distribution.
Recomendado
Digital Signal Processing
The XC4VLX15-10SF363I provides a compact implementation path for fixed-function digital signal processing. The 32 DSP slices can implement multipliers, multiply-accumulate stages, and parallel filter components, while 864 Kb of block RAM can hold coefficients, delay lines, and captured data. For example, the device could execute decimation or interpolation, generate a fixed-point control function, or pre-process an audio or sensor stream before handing results to a processor. Parallel fabric paths can sustain multiple channels with deterministic latency, and hard DSP resources can reduce reliance on general logic. Timing closure should map multipliers and adders into DSP slices before using LUT-based arithmetic. The design must also address power delivery and thermal dissipation because sustained DSP activity can increase switching activity beyond that of an idle configuration.
Recomendado
Test and Measurement Instrumentation
The XC4VLX15-10SF363I is appropriate for instrumentation requiring deterministic acquisition, sequencing, and signal conditioning. The FPGA can generate precise digital patterns, coordinate ADC and DAC interfaces, implement trigger logic, and process captured samples in real time. Its 13,824 logic cells allow multiple instrument channels or a deep control state machine to coexist, while block RAM can implement capture buffers and DSP slices can accelerate filters or demodulation. This architecture is useful when data must be sampled consistently across multiple interfaces or transformed before transfer to an embedded host. The 363-ball package accommodates substantial parallel connectivity, but analog and digital sections should be partitioned carefully to prevent switching noise from degrading measurement accuracy. Use separate power domains where appropriate and validate the finished board for crosstalk, reference stability, and thermal behavior.
Recomendado
Communications and Protocol Conversion
The XC4VLX15-10SF363I can bridge legacy parallel and high-speed serial interfaces by performing serialization, clock-domain crossing, protocol conversion, and data alignment in parallel hardware. The 13,824-cell fabric supports multiple concurrent lanes, while block RAM provides elastic buffers for short-term rate matching and DSP slices can assist with filtering or modulation functions. A typical implementation would accept data from a host bus, transform framing and byte order, and transmit it through a high-speed interface while monitoring link status and generating interrupts. Fixed hardware pipelines provide repeatable latency and reduce processor overhead. For reliable operation, constrain all interface timing, register asynchronous crossings appropriately, and use dedicated clock and power distribution. Confirm every alternative I/O standard and voltage against the exact package data before assigning pins.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC4VLX15-10SF363I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC4VLX15-10SFG363I | XC4VLX15-10SF363C | XC4VLX15-11SFG363C | XC4VLX15-12SF363C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 363-pin FCBGA (17 × 17 mm) | 363-pin FCBGA (17 × 17 mm) | 363-pin FCBGA | 363-pin FCBGA | 363-pin FCBGA |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells | 13,824 cells |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | 10 | 10 | 10 | 11 | 12 |
| Temperature Designation | Industrial | Industrial | Commercial | Commercial | Commercial |
Principais diferenciais
- Maintains the established XC4VLX15 resource profile across listed package variants (vs XC4VLX15-10SFG363I)
- Industrial ordering option for temperature-sensitive equipment (vs XC4VLX15-10SF363C)
- Higher-speed alternatives are available without changing the device density (vs XC4VLX15-12SF363C)
Notas de projeto
Use the manufacturer’s exact 363-FCBGA footprint and pin tables rather than a generic BGA symbol. The documented package is 17 × 17 mm with 0.8 mm ball pitch, so small placement, paste-volume, and registration deviations can cause open or shorted joints. Confirm PCB stackup, solder-mask definition, paste thickness, stencil apertures, and assembly capability against the package drawing. Maintain short escape paths from BGA balls to decoupling components and avoid long stubs on high-speed nets.
Treat the 90 nm FPGA’s I/O paths as a complete signal-integrity system. Use continuous reference planes, matched layer transitions, and an unobstructed return path beneath every high-speed trace. Derive trace widths and compensation from the selected PCB stackup rather than copying a nominal rule blindly. Pay particular attention to clocks, chip-select signals, and simultaneous switching outputs, and validate the final design with simulation or measurement where edge rates and channel losses make analytical estimates uncertain.
Estimated: power dissipation depends on the selected logic, I/O activity, clocking, and the 1.2 V supply; the device-specific maximum cannot be substituted with the generic FPGA supply voltage. For thermal assessment, multiply measured core current by 1.2 V and add I/O and auxiliary-rail power from the design’s power tree. Compare the resulting worst-case total with the package thermal limits and junction-temperature budget. Avoid using a nominal supply voltage as a power figure because switching activity can materially change actual consumption.
Do not substitute solely because two MPNs share the 363-FCBGA package. Confirm speed grade, temperature designation, ordering suffix, device marking, configuration method, and toolchain support. If choosing XC4VLX15-11SFG363C or XC4VLX15-12SF363C, regenerate the bitstream and rerun static timing analysis because the speed-grade change can alter timing margins. Keep the exact approved MPN in BOM, firmware, test plans, and production documentation to prevent mixed-device populations.
Informações de conformidade
The exact ordering suffix may encode finish or environmental information, but the listed information does not explicitly establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance.