XC4VLX60-10FF668I - 59,904-Cell 90nm FPGA | AMD | FBGA-668
N.º da peça: XC4VLX60-10FF668I ✗ Fim de vidaXC4VLX60-10FF668I Visão geral
An FPGA is a semiconductor whose digital behavior is defined after manufacture through a configuration bitstream. Within the product hierarchy, this device is an FPGA and programmable logic device, combining configurable logic blocks, block RAM, dedicated DSP resources, programmable I/O, and clock-management circuitry. The Virtex-4 LX architecture provides a unified fabric for implementing parallel datapaths and control logic rather than relying on several discrete logic devices.
Key device attributes include 59,904 logic cells, 448 I/O, 26,624 adaptive logic modules, 2.81 Mbit of embedded memory, 90 nm CMOS construction, and a 1.2 V supply. The -10 speed grade targets the lower-performance end of the Virtex-4 LX range, while the industrial I suffix identifies operation from 0°C to 85°C. The 668-ball FCBGA package supports dense board integration but requires careful via-in-pad, solder-mask, and thermal design.
The part's 59,904 logic cells provide substantially more parallel capacity than small CPLDs, while its 448 I/O sites support high-pin-count interfaces. Embedded memory supports packet buffering, frame storage, lookup functions, and data-plane buffering. Dedicated DSP arithmetic and selectable clocking help implement fixed-point signal processing, serializers, and multi-clock systems without relying entirely on soft processors.
Typical uses include telecommunications line cards, industrial automation, data acquisition, video processing, network equipment, and embedded control. For high-speed memory interfaces or external buses, designers must implement timing constraints, clocking, and I/O standards correctly. Firmware development should account for configuration storage, startup sequencing, JTAG access, and the effect of board-level signal integrity on the 668-ball package.
For a new design, first verify the bitstream targets the exact device and speed grade. Use AMD package pinout files and the Virtex-4 documentation to assign every ball, and confirm power, decoupling, clock, configuration, and JTAG requirements. Existing legacy designs should also review tool-chain support and long-term availability before committing to a new production run.
This page combines device specifications, package-level engineering guidance, lifecycle considerations, comparison parameters, and practical drop-in alternatives. These details help engineers distinguish speed-grade, temperature-grade, and lead-free ordering variants before making a board-level replacement decision.
Alternativas drop-in para XC4VLX60-10FF668I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC4VLX60-10FF668I (mesmo formato e footprint) — diferindo em Package, Temperature Grade, Speed Grade, Adaptive Logic Modules, Logic Blocks.
XC4VLX60-10FFG668I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC4VLX60-10FF668C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX60-10FFG668C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC4VLX60-11FF668I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX60-11FFG668I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC4VLX60-11FF668C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC4VLX60-11FFG668C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC4VLX60-10FF668I Classificações máximas e características elétricas
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cells | 59,904 cells |
| Adaptive Logic Modules | 26,624 ALM |
| Embedded Memory | 2.81 Mbit |
| User I/O | 448 I/O |
| Logic Blocks | 6,656 |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Maximum Internal Frequency | 1,028 MHz |
| Encapsulamento | 668-ball FCBGA |
| Total Package Pins | 668 pins |
| Speed Grade | -10 |
| Temperature Grade | Industrial, 0°C to 85°C |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do XC4VLX60-10FF668I 668 pins
Configuração de pinos para XC4VLX60-10FF668I (pacote 668 pins). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC4VLX60-10FF668I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC4VLX60-10FF668I é adequado para 6 aplicaçãos: Telecommunications Line Cards, Industrial Automation Controllers, Data Acquisition Systems, Network Packet Processing, Digital Signal Processing, Video and Image Processing.
Telecommunications Line Cards
The XC4VLX60-10FF668I fits telecommunications line-card logic because its 59,904 logic cells can implement multiple packet-processing paths, while 448 I/O provides substantial connectivity to transceivers, backplanes, and control processors. The 2.81 Mbit of embedded memory is useful for packet buffering, statistics, and timing alignment. Place the device beside short, impedance-controlled routes to high-speed interfaces, isolate clocks carefully, and validate the complete interface timing against the selected speed grade. The industrial 0°C to 85°C range supports temperature-controlled telecommunications equipment, while the 668-ball FCBGA demands careful layer-transition and thermal design.
Recomendado
Industrial Automation Controllers
The XC4VLX60-10FF668I can consolidate programmable logic, sequencing, motion-control datapaths, and communication interfaces in an industrial controller. Its 59,904 logic cells are useful when multiple fixed-function blocks would otherwise require separate logic devices, and its 448 I/O supports machine inputs, outputs, encoders, and field buses. The industrial temperature grade covers 0°C to 85°C, but enclosure temperature, power-supply tolerance, and isolation requirements remain system-level constraints. Validate timing margins with production tools and preserve the device's configuration checksum so replacement hardware cannot silently load an incompatible bitstream.
Recomendado
Data Acquisition Systems
The XC4VLX60-10FF668I is suitable for parallel data-acquisition and control systems requiring deterministic digital preprocessing. Its 59,904 logic cells can host ADC interfaces, digital filters, trigger logic, packetizers, and local control functions, while 2.81 Mbit of embedded memory can buffer bursts between acquisition and transfer stages. The 448-I/O count enables multiple data buses, although high-speed differential routes require controlled impedance and continuous reference-plane design. Establish input timing, clock-domain relationships, and calibration sequencing during design review so performance does not depend on unverified assumptions.
Recomendado
Network Packet Processing
The XC4VLX60-10FF668I can implement high-throughput packet classification, filtering, queue management, and header processing because its 59,904 logic cells provide broad parallel datapath capacity. Embedded memory supports packet buffers and lookup structures, while programmable I/O can connect multiple physical or logical network interfaces. For line-rate designs, constrain every receive and transmit path, verify source-synchronous timing, and keep external memory interfaces away from noisy power regions. Because the -10 grade is slower than -11, compile for the actual XC4VLX60-10FF668I target and recheck timing after any device interchange.
Recomendado
Digital Signal Processing
The XC4VLX60-10FF668I is well suited to fixed-point filtering, modulation, correlation, and signal-conditioning logic where parallel arithmetic benefits from FPGA implementation. Its 26,624 adaptive logic modules and dedicated Virtex-4 DSP resources can implement multiply-accumulate pipelines, while 2.81 Mbit of embedded memory stores coefficients and sample data. Establish pipeline latency, rounding, saturation, and clock-domain rules before implementation because changing speed grade or device variant can affect timing closure. Use synchronous interfaces where possible and verify output timing against the production speed grade rather than relying on generic device capabilities.
Recomendado
Video and Image Processing
The XC4VLX60-10FF668I can implement parallel video timing, pixel transport, color conversion, and image pre-processing because its 59,904 logic cells and 448 I/O support wide data paths. Embedded memory can hold line buffers and frame-related data, making the architecture suitable for image pipelines that need deterministic latency. Designers should constrain pixel-clock domains, keep high-speed video routes over uninterrupted reference planes, and account for the pin and timing requirements of the selected external interface. Verify the board's power integrity because simultaneous switching in a 668-ball device can create dynamic supply noise and timing failures.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC4VLX60-10FF668I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC4VLX60-10FFG668I | XC4VLX60-11FF668I | XC4VLX60-11FFG668C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 668-ball FCBGA | 668-ball FCBGA - same | 668-ball FCBGA - same | 668-ball FCBGA - same |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells |
| Adaptive Logic Modules | 26,624 ALM | 26,624 ALM | 26,624 ALM | 26,624 ALM |
| Embedded Memory | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -10 | -10 | -11 | -11 |
| Temperature Grade | Industrial, 0°C to 85°C | Industrial, 0°C to 85°C | Industrial, 0°C to 85°C | Commercial |
| Ordering Feature | Original non-G ordering code | Lead-free G ordering code | Original non-G ordering code | Lead-free G ordering code |
Principais diferenciais
- Retains the original industrial temperature rating (vs XC4VLX60-11FF668C)
- Matches the original -10 timing grade (vs XC4VLX60-11FF668I)
- Provides the same 59,904-cell logic capacity (vs XC4VLX60-10FFG668I)
Notas de projeto
Assign every one of the 668 FCBGA balls from the AMD Virtex-4 package pinout file rather than from a generic BGA map. Separate power and ground balls according to the package recommendation, use short low-impedance connections for core and I/O supplies, and place high-frequency decoupling close to the device. The large ball count makes escape routing through a finite number of PCB layers a central constraint, so perform layer planning before committing to component placement.
Design the 1.2 V core rail and associated I/O supplies around the device's actual current profile, which depends on configuration, utilization, switching activity, and speed grade. Start and end conditions are commonly the highest-current states, so validate those modes rather than estimating only average operation. Use separate filtering paths for sensitive supplies where appropriate, provide adequate bulk capacitance, and verify power sequencing against the device documentation before enabling external interfaces.
Preserve continuous reference planes beneath the 668-ball device and minimize via count in high-speed signal escapes. Match clock, serial, and memory routes to the required impedance, avoid routing them through power-plane splits, and control differential-pair skew. The -10 and -11 speed grades have different timing margins, so a layout validated for XC4VLX60-10FF668I should be rechecked before substituting an XC4VLX60-11 series device.
Do not treat the C, G, I, and speed-ordering suffixes as interchangeable without reviewing their meanings. A speed-grade change can require a new bitstream and complete timing revalidation; a temperature-grade change can alter the qualified environmental range; and a G change can affect assembly documentation and material declarations. Record the exact ordering code in the schematic bill of materials and compare the physical top marking against the approved procurement specification.
Informações de conformidade
The exact G suffix on XC4VLX60-10FFG668I identifies a lead-free ordering option, while the original XC4VLX60-10FF668I lead-free status is not stated. Other compliance declarations are unknown.