XC5VFX30T-2FF665I - 3040 Logic Cell FPGA | AMD Xilinx
N.º da peça: XC5VFX30T-2FF665I ✓ AtivoXC5VFX30T-2FF665I Visão geral
A field-programmable gate array is a semiconductor device whose digital logic, interconnections, and system functions are configured after manufacture. The Virtex-5 FXT family combines configurable logic blocks, dedicated arithmetic and DSP resources, block RAM, programmable I/O, and high-speed serial transceivers. Within the FPGA hierarchy, this component functions as a reconfigurable digital system-on-chip platform rather than a fixed-function processor or standard logic IC.
Key features include 3040 logic cells, 360 I/O, 665 package balls, and a listed internal frequency of 1098 MHz. The large I/O count is particularly valuable for parallel buses, memory interfaces, custom accelerator links, and test equipment. The 65 nm CMOS process and 1 V supply identify this device as a performance-oriented member of the Virtex-5 generation, while the FXT designation indicates support for integrated high-speed connectivity and embedded processing resources.
The XC5VFX30T-2FF665I belongs to the Virtex-5 FXT platform, whose architecture combines programmable logic with dedicated DSP blocks, distributed and block memory, clocking, and serial transceivers. These fixed-function blocks reduce the amount of general-purpose logic required for multiplication, accumulation, data movement, and high-speed serial links. The device therefore supports designs that combine parallel control logic with dedicated data-processing channels rather than relying exclusively on soft logic.
Typical applications include telecommunications and networking equipment, industrial control, instrumentation, digital signal processing, high-speed data acquisition, defense-related programmable systems, and embedded test platforms. The 360 available I/O positions allow a design to connect multiple buses, memories, converters, and clock domains, while the FXT feature set supports designs requiring deterministic real-time processing and high-speed external links.
PCB design requires careful attention to the 665-ball FCBGA footprint, power decoupling, ball-grid escape routing, and thermal performance. Follow the AMD pinout, package, and power-decoupling guidance when assigning every ball and planning layer transitions. Differential pairs and high-speed serial routes must also preserve the voltage, impedance, and return-path requirements specified for the selected I/O standards.
This product page combines the exact catalog identity, technical characterization, drop-in family options, comparison parameters, and application-focused engineering guidance needed to evaluate the XC5VFX30T-2FF665I before schematic capture, PCB layout, and FPGA configuration planning.
Alternativas drop-in para XC5VFX30T-2FF665I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC5VFX30T-2FF665I (mesmo formato e footprint) — diferindo em Architecture, Logic Cells, Package.
XC5VFX30T-2FFG665I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC5VFX30T-1FF665I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC5VFX30T-2FFG665C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC5VFX30T-2FF665C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC5VFX30T-3FF665I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC5VFX30T-2FF665I Classificações máximas e características elétricas
| Device Type | Virtex-5 FXT Field Programmable Gate Array |
| Logic Cells | 3040 logic cells |
| Input/Output Count | 360 I/O |
| Internal Frequency | 1098 MHz |
| Process Technology | 65 nm CMOS |
| Tensão de alimentação | 1 V |
| Package Type | 665-pin FCBGA |
| Package Dimensions | 27 mm x 27 mm |
| Contagem de pinos | 665 pins |
| Faixa de temperatura de operação | 0°C to 85°C |
| Programmable Logic Type | FPGA |
| FPGA Family | Virtex-5 FXT |
| Architecture | ASMBL column-based architecture |
| Tipo de montagem | Surface Mount |
Guia de Configuração de Pinos do XC5VFX30T-2FF665I 27 mm x 27 mm
Configuração de pinos para XC5VFX30T-2FF665I (pacote 27 mm x 27 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC5VFX30T-2FF665I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC5VFX30T-2FF665I é adequado para 6 aplicaçãos: Telecommunications Data-Path Processing, Industrial Digital Signal Processing, High-Speed Data Acquisition, Test and Measurement Instrumentation, Embedded Signal-Processing Platform, Aerospace and Defense Systems.
Telecommunications Data-Path Processing
The XC5VFX30T-2FF665I fits telecommunications equipment requiring parallel packet handling, clocked data paths, and numerous external interfaces. Its 3040 logic cells can support protocol conversion, buffering, and control logic, while 360 I/O positions provide connections to transceivers, memories, network processors, and management controllers. The 1098 MHz listed internal frequency supports high-speed synchronous designs, although achievable line rates depend on timing closure, I/O standards, and board-level signal integrity. A 1 V supply and 65 nm CMOS implementation fit established Virtex-5 power architectures. Use manufacturer clocking and pin-assignment guidance to keep high-speed routes short and properly terminated.
Recomendado
Industrial Digital Signal Processing
The XC5VFX30T-2FF665I is suitable for industrial DSP modules that combine real-time filtering, control, and multi-channel data acquisition. The FPGA fabric can parallelize filtering and sampling operations, while the 360 I/O positions can connect converters, sensors, memory, and digital control interfaces. Its listed 1098 MHz internal frequency allows high-speed clock domains, although system timing must be checked against I/O delay and routing requirements. The 0°C to 85°C operating range covers many factory-floor environments when the assembled system maintains suitable internal temperatures. Designers should reserve clean power planes, decouple each supply rail locally, and follow the manufacturer BGA escape-routing and thermal guidance.
Recomendado
High-Speed Data Acquisition
The XC5VFX30T-2FF665I can serve as the central programmable device in a parallel data-acquisition system because it combines 3040 logic cells with 360 I/O. The wide I/O count supports multiple converter channels, clock distribution, trigger inputs, data capture registers, and high-speed memory interfaces. Its 1098 MHz listed internal frequency provides substantial timing headroom for synchronous pipelines, though converter resolution, sampling rate, and external clock jitter determine the usable acquisition bandwidth. Use the manufacturer's supported I/O standards and pin constraints when assigning banks. PCB layout should minimize skew between related data lines and provide continuous reference planes for any differential or high-speed interfaces.
Recomendado
Test and Measurement Instrumentation
The XC5VFX30T-2FF665I is well suited to modular test equipment that requires flexible sequencing, pattern generation, and real-time analysis. Its programmable logic can implement counters, timing engines, protocol analyzers, and digital stimulus patterns, while 360 I/O positions connect instruments and remote I/O modules. The device's 1 V supply and 65 nm CMOS process support dense instrument designs without requiring a very large I/O count for basic control. The 0°C to 85°C range is useful across many laboratory and industrial environments. Layout should account for BGA routing congestion, isolate sensitive analog sections, and use controlled clocking so that test results are not degraded by power or clock uncertainty.
Recomendado
Embedded Signal-Processing Platform
The XC5VFX30T-2FF665I can implement an embedded signal-processing platform by combining programmable logic with dedicated Virtex-5 FXT resources. Fixed arithmetic and connectivity blocks can accelerate multiply-accumulate operations, filtering, and high-speed data transfer, reducing pressure on the 3040 general-purpose logic cells. The large I/O inventory supports parallel sensors, memory banks, serial links, and control peripherals. Engineers should map each design block against the manufacturer resource tables before assuming sufficient DSP, block RAM, clock-management, or transceiver capacity. Power and thermal planning should evaluate the actual utilized resources rather than relying only on the device-level 1098 MHz internal frequency.
Recomendado
Aerospace and Defense Systems
The XC5VFX30T-2FF665I is suitable for programmable avionics, guidance, simulation, and test subsystems that require flexible logic and extensive I/O in a compact BGA package. The 3040 logic cells support control sequencing, data transformation, and protocol handling, while 360 I/O positions connect sensors, memory, and communication equipment. Its specified 0°C to 85°C range may fit many system environments, but qualification, radiation tolerance, screening, and extended-temperature requirements must be assessed separately because those attributes are not established by the catalog designation alone. Use controlled configuration procedures and manufacturer device guidelines when the design participates in safety- or mission-critical equipment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC5VFX30T-2FF665I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC5VFX30T-2FFG665I | XC5VFX30T-1FF665I | XC5VFX30T-2FFG665C | XC5VFX30T-2FF665C | XC5VFX30T-3FF665I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA | 665-pin FCBGA |
| FPGA Family | Virtex-5 FXT | Virtex-5 FXT | Virtex-5 FXT | Virtex-5 FXT | Virtex-5 FXT | Virtex-5 FXT |
| Speed Grade | -2 | -2 | -1 | -2 | -2 | -3 |
| Temperature Designation | I, industrial, 0°C to 85°C | I | I | C, commercial | C, commercial | I |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
Principais diferenciais
- Provides the -2 speed grade with an industrial temperature designation (vs XC5VFX30T-1FF665I)
- Supports operation from 0°C to 85°C (vs XC5VFX30T-2FFG665C)
- Combines 3040 logic cells with 360 I/O (vs XC5VFX30T-3FF665I)
Notas de projeto
Treat the XC5VFX30T-2FF665I as a demanding 665-ball BGA layout. Follow the manufacturer ball map and escape-routing guidance, keep the BGA footprint on the package side of the stack-up when practical, and provide uninterrupted reference planes beneath routed areas. Assign power and ground balls according to the manufacturer recommendations rather than distributing high-current connections arbitrarily. Validate the final stack-up with the assembly house because solder-mask definition, pad geometry, and copper balancing can affect both assembly yield and thermal performance.
The device operates from a 1 V supply, but its complete power tree must include all manufacturer-specified rails and sequencing requirements. Place the required bypass capacitance at the corresponding supply balls and use a low-impedance distribution network that separates sensitive logic supplies from noisy loads. Estimate total dissipation from the actual design utilization and rail currents, then size copper area, vias, and thermal relief for the expected temperature rise. Do not derive a switching regulator selection from the nominal 1 V figure alone.
Use the manufacturer constraints for every clock, high-speed I/O, and differential pair, including supported standards, voltage thresholds, maximum skew, and routing length. Preserve a continuous return path under each high-speed signal and match pair geometry through the BGA escape and inner layers. Although the device has a listed 1098 MHz internal frequency, external interface performance also depends on I/O standard, package delay, board loss, clock jitter, and receiver loading. Validate the final design with post-layout simulation.
Estimate junction temperature from actual resource utilization, board copper, airflow, and the thermal model specified for the package. A 27 mm by 27 mm FCBGA can create uneven thermal loading across the die, particularly when large logic, DSP, RAM, or transceiver blocks operate simultaneously. Spread high-power regions when the floorplan permits, provide thermal vias according to the package guidance, and avoid enclosing the board in a stagnant enclosure. Use the production workload rather than a lightly loaded simulation when checking the thermal margin.
Do not substitute speed or temperature suffixes solely because the BGA footprints match. XC5VFX30T-1FF665I is one speed grade lower, while C-designated variants use the commercial-temperature designation. A footprint-compatible device can still fail timing, temperature, or configuration requirements. Before substitution, compare the manufacturer selection guide, verify the device ID and configuration memory requirements, run a full design rebuild, and repeat post-route timing analysis under the intended clock constraints.
Informações de conformidade
No explicit compliance declarations are present in the cited catalog records. Automotive qualification, radiation tolerance, and extended-temperature capability are not established by the industrial I suffix alone.