XC68HC912D60CFU8-FR - 16-Bit 60KB Flash MCU | NXP
N.º da peça: XC68HC912D60CFU8-FR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $1.0048 | $1,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
XC68HC912D60CFU8-FR Visão geral
An MCU is a semiconductor device that combines a processor core, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The M68HC12 family belongs to the embedded-microcontroller hierarchy, where a CPU executes firmware, reads inputs, controls outputs, and manages communication links. The XC68HC912D60CFU8-FR is positioned for industrial and embedded applications where CANbus, serial, SPI, or related interfaces are useful system building blocks.
The verified product information identifies the MCU as using a 16-bit CPU12 core, 60 KB flash, 80-QFP packaging, and connectivity including CANbus, MI Bus, SCI, and SPI. The available search data does not provide verified RAM size, maximum CPU frequency, supply voltage, ADC specifications, timer details, operating-temperature grade, or absolute pin-level timing values for this exact suffix, so those parameters remain unspecified rather than inferred. The NXP datasheet search result also identifies related XC68HC912D60 package and temperature-grade orderings, which should be used as a basis for checking the final ordering code.
Typical design roles include embedded motor and industrial controllers, CAN-connected equipment, serial-device control, SPI peripheral coordination, and compact control platforms requiring a 16-bit MCU architecture. The -FR suffix is an ordering designation associated with the supplied part number; package, temperature, and lead-finish details should be confirmed against the manufacturer ordering information before production release.
Designers should preserve the exact 80-pin QFP footprint and verify pin multiplexing, power, ground, clock, debug, and communication assignments from the datasheet before layout release. Review the required CANbus, SCI, SPI, and MI Bus transceiver or peripheral connections, and confirm that the selected firmware, development tools, and memory map match the exact device variant.
This page consolidates verified distributor and manufacturer-linked search data, the available datasheet references, ordering information, and engineering-selection guidance for engineers evaluating XC68HC912D60CFU8-FR.
Alternativas drop-in para XC68HC912D60CFU8-FR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC68HC912D60CFU8-FR (mesmo formato e footprint) — diferindo em Package, Maximum Clock Frequency, ADC Channels, Connectivity, Lifecycle Status.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
XC68HC912D60FU8
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC68HC912D60VFU8
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC68HC912D60CPV8
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MC912DG128AVPV-FR
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →MC9S12D32MFUE
✅ Drop-In✓ Em estoque
$26.4032 / unidade
Ver ficha técnica →MC9S12DJ128CPVE
✅ Drop-In✓ Em estoque
$19.75 / unidade
Ver ficha técnica →XC68HC912D60CFU8-FR Classificações máximas e características elétricas
| Core Processor | CPU12 |
| Core Size | 16-bit |
| Flash Memory | 60 KB |
| Connectivity | CANbus, MI Bus, SCI, SPI |
| Encapsulamento | 80-pin QFP |
| Package Family | QFP family |
| Tipo de montagem | Surface Mount |
| Product Type | Embedded microcontroller |
| Manufacturer | Motorola / Freescale Semiconductor / NXP lineage |
| Ordering Suffix | -FR |
| Contagem de pinos | 80 pins |
Guia de Configuração de Pinos do XC68HC912D60CFU8-FR qfp family
Configuração de pinos para XC68HC912D60CFU8-FR (pacote qfp family). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC68HC912D60CFU8-FR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC68HC912D60CFU8-FR é adequado para 6 aplicaçãos: CANbus Industrial Control, Serial Peripheral Controller, SPI-Based Data Acquisition, Motor and Motion Control, Embedded Instrumentation, Legacy Equipment Repair.
CANbus Industrial Control
The XC68HC912D60CFU8-FR fits CANbus-enabled industrial equipment because the verified product listing identifies CANbus connectivity and a 16-bit CPU12 core. Use the MCU for supervisory control, actuator coordination, diagnostics, and distributed I/O when the existing firmware and board are tied to the M68HC912D60 family. The verified data does not specify CAN transceiver details, bus timing, termination, or exact peripheral limits, so the external network interface and pin multiplexing must be validated from the exact datasheet. Its 80-pin QFP provides a defined legacy package target, but signal integrity and grounding remain essential in a multi-node industrial enclosure.
Recomendado
Serial Peripheral Controller
The device is suitable for embedded serial coordination because verified connectivity includes SCI and MI Bus. It can serve as a controller for sensors, display modules, actuators, or service interfaces in equipment where a 16-bit embedded core and 60 KB of flash are appropriate. The supplied data does not verify baud-rate limits, SCI electrical levels, handshake support, or peripheral operating modes, so those details must be checked before selecting external transceivers or connectors. Firmware should use the exact device header and initialization sequence for the selected suffix.
Recomendado
SPI-Based Data Acquisition
XC68HC912D60CFU8-FR can be used as the supervisory controller for SPI-connected sensors, converters, memory, or display peripherals because SPI is explicitly identified in the verified listing. The 16-bit CPU12 architecture and 60 KB flash provide a dedicated platform for acquisition logic, calibration tables, and communication firmware. The available data does not specify SPI clock range, chip-select mapping, DMA behavior, or electrical timing, so those constraints require direct confirmation from the exact NXP documentation. PCB routing should keep SPI traces short, provide a defined ground reference, and account for signal-integrity margin at the selected clock.
Recomendado
Motor and Motion Control
The XC68HC912D60CFU8-FR is applicable to legacy or maintenance-oriented motion-control systems where a 16-bit CPU12 MCU, 60 KB flash, and multiple communication interfaces are needed. It can coordinate motor-control sequencing, limit inputs, sensor monitoring, and host communications while preserving an existing M68HC912D60 software base. The supplied verified data does not identify timer resolution, PWM channels, capture features, or motor-control peripherals, so it should not be treated as a complete motor-driver solution without reviewing the datasheet. Power-stage design, current sensing, fault handling, and thermal protection must remain external or system-specific as appropriate.
Recomendado
Embedded Instrumentation
The device can serve in instrumentation and measurement equipment that already expects a CPU12-based embedded platform. The 16-bit core can support control flow, local calculations, status reporting, and interface management, while the verified 60 KB flash figure supports embedded firmware storage. The provided data does not verify ADC resolution, analog input count, comparator features, or sampling timing, so analog front-end suitability must be established from the exact datasheet. Use SCI or another listed interface for service diagnostics, and isolate sensitive analog routing from switching and high-current power paths.
Recomendado
Legacy Equipment Repair
XC68HC912D60CFU8-FR is a practical candidate for repairing or extending equipment built around the XC68HC912D60 family, especially where software, board layout, and peripheral expectations are already established. The verified product data identifies the part as a 60 KB-flash, 16-bit, 80-pin QFP embedded MCU, allowing engineers to screen inventory by architecture and package before ordering. Replacement should still require exact pinout, electrical, clock, memory, and firmware verification. Photographing the original device marking and comparing the complete ordering suffix can prevent accidental substitution of a related but non-compatible family member.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC68HC912D60CFU8-FR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC68HC912D60FU8 | XC68HC912D60VFU8 | XC68HC912D60CPV8 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-pin QFP | 80-pin QFP | 80-pin QFP | 80-pin QFP |
| Core | CPU12, 16-bit | M68HC912D60 family, 16-bit | M68HC912D60 family, 16-bit | M68HC912D60 family, 16-bit |
| Pin Count | 80 pins | 80 pins | 80 pins | 80 pins |
Principais diferenciais
- Directly identified M68HC912D60-family architecture (vs MC9S12D32MFUE)
- Verified communication-interface set (vs XC68HC912D60FU8)
- Documented 80-pin QFP architecture (vs MC912DG128AVPV-FR)
- Specific stocked ordering representation (vs XC68HC912D60VFU8)
Notas de projeto
Do not release the board layout from package name alone. The verified material identifies an 80-pin QFP, but the exact pin numbers, power pins, ground distribution, clock pins, reset, debug, and communication multiplexing must be taken from the exact XC68HC912D60CFU8-FR documentation. Confirm the package drawing and land pattern, maintain solder-mask and paste compatibility, and route high-current or sensitive analog paths away from communication and clock nets.
For CANbus, SCI, and SPI connections, preserve the reference plane and keep traces as short as practical. Use the data-sheet-recommended termination and external transceiver arrangements rather than assuming MCU pins can connect directly to a physical bus. For SPI, define chip-select polarity and trace loading from the confirmed peripheral map; for CANbus, validate transceiver standby, termination, protection, and fault behavior in the final system.
The most common risk is treating a related M68HC912D60 ordering as a drop-in replacement without checking the suffix. XC68HC912D60FU8, XC68HC912D60VFU8, and XC68HC912D60CPV8 appear in verified search results, but the supplied data does not establish identical temperature grade, commercial attributes, pin mapping, or electrical behavior. Compare the complete ordering table, memory, package, clock, reset, and peripheral details before substitution.
The supplied data does not verify the supply-voltage range, absolute maximum ratings, or current limits for XC68HC912D60CFU8-FR. Before adding decoupling or selecting regulators, obtain the exact electrical-characteristics table and confirm voltage tolerance, I/O levels, startup behavior, and power sequencing. Use the manufacturer’s recommended decoupling topology and place components near the relevant power and ground pins according to the exact pin map.
Informações de conformidade
The supplied verified data identifies the part, package, core, flash, and connectivity but does not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.