XC6SLX45T-4CSG324C - 43,661-Cell Spartan-6 FPGA | AMD
N.º da peça: XC6SLX45T-4CSG324C ✗ Fim de vidaXC6SLX45T-4CSG324C Visão geral
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and other configurable resources are programmed after fabrication. The Spartan-6 FPGA product hierarchy combines configurable logic blocks, programmable I/O, memory resources, clock-management capabilities, and dedicated hardware blocks for signal processing and connectivity. This makes the FPGA class useful when a product requires parallel programmable logic, rapid hardware revisions, or high-speed serial interfaces.
The XC6SLX45T part number identifies the Spartan-6 LXT family and a 43,661-logic-cell device. Its 324-CSPBGA package provides 190 user I/O in a compact surface-mount footprint. The -4 speed designation and CSG324 package code define the ordering configuration, while the final C suffix identifies the commercial temperature option associated with the listed operating junction-temperature range of 0°C to 85°C.
The LXT product family supports designs requiring substantial programmable logic and serial connectivity. Its 1.14 V to 1.26 V operating range is important for power-supply design because the board must maintain the specified core-voltage tolerance across temperature, load, and transient conditions. The 190-I/O resource count is the primary PCB-planning figure when assigning banks, external data buses, clocks, control signals, and high-speed interfaces.
Typical uses include industrial controllers, embedded video and image processing, communications infrastructure, data acquisition, instrumentation, and consumer or automotive electronic systems. For each application, designers should verify speed-grade timing, I/O-bank voltage compatibility, configuration memory requirements, clocking, thermal performance, and board-level power delivery before committing the design.
The 324-CSPBGA package makes escape-routing and assembly demanding. Use the AMD Spartan-6 package pinout files to assign every ball, preserve the power and ground connections, place decoupling close to the supply pins, and validate high-speed routing against the selected device speed grade. This page combines ordering data, lifecycle information, sourcing guidance, and engineering-focused replacement considerations for obsolete-board maintenance.
Because this device is listed as obsolete, an existing design may be maintained by sourcing the exact commercial-temperature MPN, while a new board should normally use a currently supported FPGA after a complete timing, pinout, software-tool, and lifecycle review rather than assuming that a nearby device is a drop-in replacement.
Alternativas drop-in para XC6SLX45T-4CSG324C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC6SLX45T-4CSG324C (mesmo formato e footprint) — diferindo em Device Type, Package, Speed Grade.
XC6SLX45T-4CSG324I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC6SLX45T-2CSG324C
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC6SLX45T-3CSG324C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC6SLX45T-1CSG324C
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC6SLX45-2CSG324C
✅ Drop-InConsulte o preço
Ver ficha técnica →XC6SLX45T-4CSG324C Classificações máximas e características elétricas
| Device Type | Spartan-6 LXT Field Programmable Gate Array (FPGA) |
| Logic Cells | 43,661 cells |
| User I/O | 190 I/O |
| Operating Voltage Range | 1.14 V to 1.26 V |
| Nominal Supply Voltage | 1.2 V |
| Faixa de temperatura de junção de operação | 0°C to 85°C |
| Encapsulamento | 324-CSPBGA, 15 x 15 mm |
| Surface-Mount Type | CSPBGA |
| Device Family | Spartan-6 LXT |
| FPGA Configuration | Field programmable |
| Speed Grade | -4 |
| Technology | CMOS |
| Packaging | Tray |
| Status do ciclo de vida | Obsolete |
| Status RoHS | RoHS non-compliant |
Guia de Configuração de Pinos do XC6SLX45T-4CSG324C 324-cspbga, 15 x 15 mm
Configuração de pinos para XC6SLX45T-4CSG324C (pacote 324-cspbga, 15 x 15 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC6SLX45T-4CSG324C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC6SLX45T-4CSG324C é adequado para 6 aplicaçãos: Industrial Control and Automation, Data Acquisition and Instrumentation, Communications and Network Interface, Embedded Video and Image Processing, Automotive and Vehicle Electronics, Security and Surveillance.
Industrial Control and Automation
The XC6SLX45T-4CSG324C fits programmable industrial-control logic where a design benefits from 43,661 logic cells and 190 I/O in a compact 15 x 15 mm CSPBGA package. It can implement sequencing, interlocks, communication bridges, machine-state logic, and real-time control functions while keeping the FPGA beside other board-level processors. Its 1.14 V to 1.26 V core range requires a stable 1.2 V-class supply, and the listed 0°C to 85°C operating junction-temperature range must be checked against enclosure conditions. Board planning should also account for high-speed clock routing, I/O-bank voltages, and AMD's 324-ball package files.
Recomendado
Data Acquisition and Instrumentation
The XC6SLX45T-4CSG324C is suitable for parallel data-acquisition and instrumentation designs that need programmable timing, control, and I/O capacity. Its 190 I/O can support digital sensor interfaces, counters, trigger distribution, status signals, and data paths, while 43,661 logic cells provide room for acquisition pipelines and control functions. The 1.14 V to 1.26 V operating range must remain stable during analog-interface activity and switching transients. Use short, controlled routes for clocks and acquisition buses, follow the package power-and-ground ballout, and reassess timing if a different speed grade is selected.
Recomendado
Communications and Network Interface
The XC6SLX45T-4CSG324C can serve as the programmable fabric in communications equipment needing high logic density, multiple I/O, and dedicated Spartan-6 LXT resources. Possible roles include protocol conversion, packet preprocessing, test-pattern generation, custom interface bridging, and clocked data routing. The 190-I/O device can distribute parallel or differential interfaces when their voltage and timing requirements fit the selected I/O banks. Designers should use AMD's exact 324-CSPBGA pinout, constrain the -4 speed grade correctly, and verify signal-integrity and power-supply requirements for every high-speed interface.
Recomendado
Embedded Video and Image Processing
The XC6SLX45T-4CSG324C offers enough programmable logic for embedded video timing, pixel routing, test and control functions, and parallel processing around dedicated media devices. Its 190 I/O and 43,661 logic cells allow a compact implementation in which pixel data, synchronization signals, and configuration control coexist on one programmable device. The CSPBGA package's 15 x 15 mm area supports dense integration but demands careful ball assignment, uninterrupted power distribution, and short escape routes. Use the AMD package files to map the video interface and confirm that speed-grade timing and I/O-bank voltage constraints meet the target frame rate.
Recomendado
Automotive and Vehicle Electronics
The XC6SLX45T-4CSG324C can implement programmable control, diagnostic, communication, and signal-routing functions in vehicle electronics when its environmental and qualification limits match the system. The device contains 43,661 logic cells and 190 I/O, allowing substantial logic to be consolidated in a 324-CSPBGA package. Its listed commercial operating junction-temperature range is 0°C to 85°C, so it should not be treated as an extended-temperature automotive device without formal review. Automotive production also requires supplier traceability, functional-safety analysis, EMC validation, and confirmation that the exact device's qualification status satisfies the project specification.
Recomendado
Security and Surveillance
The XC6SLX45T-4CSG324C is useful in programmable surveillance systems that require deterministic logic for sensor synchronization, trigger handling, motion-processing pipelines, and peripheral control. The 43,661-cell fabric supports parallel image and control functions, while 190 I/O enables connection of cameras, storage interfaces, status indicators, and synchronization signals. Designers should maintain continuous clocking, isolate sensitive routes, validate power sequencing, and provide thermal copper around the CSPBGA assembly. Because the device is obsolete, a new surveillance platform should be based on a supported FPGA, while an existing installation can retain the exact device if long-term maintenance and traceability requirements are met.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC6SLX45T-4CSG324C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC6SLX45T-4CSG324I | XC6SLX45T-2CSG324C | XC6SLX45T-3CSG324C | XC6SLX45T-1CSG324C | XC6SLX45-2CSG324C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 324-CSPBGA, 15 x 15 mm | 324-CSPBGA, 15 x 15 mm | 324-CSPBGA, 15 x 15 mm | 324-CSPBGA, 15 x 15 mm | 324-CSPBGA, 15 x 15 mm | 324-CSPBGA, 15 x 15 mm |
| Device Type | Spartan-6 LXT FPGA | Spartan-6 LXT FPGA | Spartan-6 LXT FPGA | Spartan-6 LXT FPGA | Spartan-6 LXT FPGA | Spartan-6 LX FPGA |
| User I/O | 190 I/O | 190 I/O | 190 I/O | 190 I/O | 190 I/O | 218 I/O |
| Speed Grade | -4 | -4 | -2 | -3 | -1 | -2 |
| Special Feature | Commercial temperature configuration | Industrial temperature ordering suffix | Lower -2 speed grade | Lower -3 speed grade | Lower -1 speed grade | Non-T ordering form |
Principais diferenciais
- Highest speed grade among the listed same-package alternatives (vs XC6SLX45T-2CSG324C)
- Exact commercial temperature configuration for the maintained design (vs XC6SLX45T-4CSG324I)
- Maintains the LXT device architecture with 43,661 logic cells and 190 I/O (vs XC6SLX45-2CSG324C)
Notas de projeto
Use AMD's ASCII Spartan-6 324-CSPBGA package file as the authoritative ball map and export it into the PCB library. Assign every power, ground, configuration, clock, and user I/O ball before routing. Preserve the documented power and ground connectivity, and verify that the board footprint, pad dimensions, solder-mask definition, and assembly process match the 15 x 15 mm CSPBGA package. The 190 user I/O figure must not be used as the total ball count.
Design the core supply for the stated 1.14 V to 1.26 V operating range with 1.2 V nominal. Place local high-frequency decoupling directly across the appropriate supply and ground balls, maintain low-resistance power and ground planes, and validate startup, load transients, and regulator tolerance at temperature. I/O banks may require separate external voltages, so review each bank configuration instead of assuming every I/O rail equals the core supply.
Constrain the design for the exact -4 speed grade and route clock and high-speed interfaces as controlled-impedance nets. Keep clocks away from noisy switching paths, provide continuous return paths, and account for CSPBGA escape-routing constraints. When evaluating a -3, -2, or -1 speed-grade alternative, regenerate timing constraints and rerun static timing analysis; pin compatibility alone does not preserve timing margin.
The listed operating junction-temperature range is 0°C to 85°C, so calculate junction temperature at the worst-case ambient, load, board conductance, and local airflow. Use the package thermal data for the assembled 324-CSPBGA rather than relying on device power alone. Maintain uninterrupted copper beneath and around the device where the package design allows, and use thermal vias and plane connections to spread heat into the board.
Do not approve a substitute from the package name alone. Check the ordering table for the exact speed grade, temperature suffix, and non-T ordering form; confirm the full part number, pinout, voltage limits, timing, configuration method, supported tools, and qualification status. For a redesigned product, migrate to a currently supported FPGA and expect schematic, PCB, constraint, and software changes rather than a mechanical-only replacement.
Informações de conformidade
The component listing identifies the device as RoHS non-compliant. Other environmental and material-compliance attributes were not established.