XC7A35T-L1FTG256I - 28nm Artix-7 FPGA | AMD Xilinx
N.º da peça: XC7A35T-L1FTG256I ✓ AtivoXC7A35T-L1FTG256I Visão geral
An FPGA is a semiconductor whose digital logic, interconnect, and dedicated processing blocks are configured after manufacture. The Artix-7 family occupies the FPGA hierarchy below programmable logic devices and above fixed-function integrated circuits. By combining configurable parallel processing, high-speed serial transceivers, DSP blocks, and analog sensing resources, it supports designs that would otherwise require several discrete programmable or specialized components.
The XC7A35T provides approximately 1,843,200 gates, 33,280 logic cells, and 170 user I/Os in the FTG256 package. It also supports 464 MHz operation according to the device listing. MMCM and PLL blocks provide flexible clock generation, frequency synthesis, and phase-shifted clocking for deterministic digital systems. The 28 nm process generation supports a compact balance between performance, static power, and implementation cost.
This Artix-7 device is intended for programmable control, parallel data acquisition, signal processing, embedded instrumentation, communications preprocessing, and industrial automation. Its DSP blocks accelerate fixed-point operations commonly found in filters, transforms, and digital signal-processing pipelines. MMCMs and PLLs support multiple internal clock domains, while the available I/O support integration with external memory, converters, sensors, network interfaces, and industrial peripherals.
The XC7A35T-L1FTG256I is especially relevant to industrial equipment requiring extended-temperature qualification and a moderate logic density. The same 256-pin package and Artix-7 architecture support controlled migration among speed-grade, temperature-grade, and device-density options when timing, power, lifecycle, and qualification requirements are reassessed.
PCB implementation should follow the AMD package pinout files and UG475 guidance. Confirm the assigned FTG256 footprint, differential-pair geometry, power-plane connectivity, decoupling, configuration pins, and exposed thermal requirements against the exact device ordering code before releasing a layout.
This product summary combines device identity, package and logic-resource information, relevant Artix-7 alternatives, and engineering-oriented implementation guidance. The comparison table separates package, speed-grade, temperature-grade, logic, and I/O considerations so engineers can identify technically defensible substitutions rather than relying only on nominal FPGA family names.
Alternativas drop-in para XC7A35T-L1FTG256I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7A35T-L1FTG256I (mesmo formato e footprint) — diferindo em Package, Block RAM, Logic Cells, Device Type, Mounting Type.
XC7A35T-1FTG256I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7A35T-2FTG256I
✅ Drop-In✓ Em estoque
$31.1719 / unidade
Ver ficha técnica →XC7A35T-1FTG256C
✅ Drop-In✓ Em estoque
$84.2 / unidade
Ver ficha técnica →XC7A35T-2FTG256C
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →XC7A35T-1FTG256C-E
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XC7A35T-L1FTG256I Classificações máximas e características elétricas
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| FPGA Process Technology | 28 nm |
| Logic Cells | 33,280 cells |
| Gate Count | 1,843,200 gates |
| User I/O Count | 170 I/Os |
| Maximum Stated Operating Frequency | 464 MHz |
| Core Voltage Range | 0.95 V to 1.05 V |
| Encapsulamento | 256-pin FTBGA |
| Package Designation | FTG256 |
| Clock Management Resources | MMCM and PLL blocks |
| Programmable Logic Type | Field-programmable gate array |
| DSP Capability | DSP processing resources |
| Analog Mixed-Signal Capability | AMS integration resources |
| Technology Node | 28 nm |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do XC7A35T-L1FTG256I ftg256
Configuração de pinos para XC7A35T-L1FTG256I (pacote ftg256). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7A35T-L1FTG256I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7A35T-L1FTG256I é adequado para 6 aplicaçãos: Industrial Automation Controllers, Parallel Data Acquisition, Digital Signal Processing, Communications Preprocessing, Test and Measurement Instrumentation, Embedded Control and Sensor Fusion.
Industrial Automation Controllers
The XC7A35T-L1FTG256I fits industrial automation controllers that combine deterministic logic, multiple clock domains, and moderate I/O density in a 256-pin FTBGA package. Its 33,280 logic cells provide capacity for sequencing, communication protocols, interlocks, and machine-state control, while the listed 170 I/Os can connect sensors, actuators, encoders, and field-bus transceivers. The integrated MMCM and PLL blocks support clock synthesis and phase adjustment for acquisition and control subsystems. For industrial equipment, the L1 ordering designation is relevant, but the final design must remain within the device's specified operating-temperature limits. Place decoupling close to supply balls and follow the AMD FTG256 land pattern and pinout files.
Recomendado
Parallel Data Acquisition
The XC7A35T-L1FTG256I can serve as the control and processing element in a parallel data-acquisition system. Its programmable fabric supports parallel sample capture, digital filtering, buffering, and interface sequencing, while 170 user I/Os provide connections to converters and external data sources. The device also includes DSP processing resources that can accelerate fixed-point filtering operations, and MMCM and PLL blocks can derive related clocks for converters and memory interfaces. System partitioning should preserve timing margin between the ADC clock and logic clock domains. Engineers should define the desired sample rate and data width, then validate the clocking topology, pin assignments, and voltage requirements against the manufacturer datasheet before layout.
Recomendado
Digital Signal Processing
The XC7A35T-L1FTG256I is appropriate for fixed-point digital signal processing because its Artix-7 architecture combines 33,280 logic cells with dedicated DSP resources. Parallel filtering, correlation, waveform generation, and pre-processing functions can be mapped into the FPGA fabric and DSP blocks, providing deterministic execution and reconfigurable logic. The stated 464 MHz operating frequency establishes a useful device-level reference, although each design must meet its own timing constraints through Vivado implementation. MMCM and PLL resources can generate the clocks required by multi-rate processing paths, while 170 I/Os support converters and external data interfaces. Pipeline the arithmetic, constrain the clock domains, and verify post-route timing rather than relying on device-family timing assumptions.
Recomendado
Communications Preprocessing
The XC7A35T-L1FTG256I can support communications preprocessing when the design needs programmable framing, buffering, filtering, and protocol adaptation. Its programmable fabric handles parallel data movement and control logic, while dedicated DSP blocks can accelerate correlation, symbol processing, or spectral operations. The 170 I/Os allow direct connection to transceivers, converters, and parallel network interfaces, and the clock-management resources support deterministic multi-rate pipelines. Because this Artix-7 member is intended for low-cost and efficient implementation, it is useful for endpoint preprocessing rather than functions requiring a much larger transceiver fabric. Interface timing, supported transceiver types, and voltage levels must be verified in the manufacturer documentation for the exact ordering code.
Recomendado
Test and Measurement Instrumentation
The XC7A35T-L1FTG256I fits compact instrumentation designs that require reconfigurable timing, pattern generation, acquisition, and analysis. Programmable logic can implement counters, state machines, sequencing, and digital calibration, while DSP resources support real-time filtering and transformations. The device's 170 I/Os provide connectivity for stimulus, response capture, status, and synchronization, and the MMCM and PLL blocks help establish precise relationships among instrument clocks. The FTBGA package supports dense designs but requires careful escape routing, layer transitions, and power-plane segmentation. Engineers should derive clock and I/O constraints early, use the official package files, and verify that the selected 0.95 V to 1.05 V operating range matches the complete power architecture.
Recomendado
Embedded Control and Sensor Fusion
The XC7A35T-L1FTG256I can combine control logic and sensor processing in compact embedded systems. Its configurable fabric supports sensor conditioning, state estimation, event handling, and actuator control, while DSP blocks accelerate arithmetic such as filtering and scaling. MMCM and PLL resources provide multiple related clocks for sensor interfaces and processing pipelines, and 170 I/Os support digital sensors, memory, communication links, and discrete controls. The device is appropriate when a microcontroller cannot provide the required parallelism or deterministic reconfigurable behavior. Partition fixed control functions away from timing-sensitive interfaces, define reset and configuration behavior early, and account for startup sequencing, I/O standards, and power-budget requirements in the system architecture.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XC7A35T-L1FTG256I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7A35T-1FTG256I | XC7A35T-2FTG256I | XC7A35T-1FTG256C | XC7A35T-2FTG256C | XC7A35T-1FTG256C-E |
|---|---|---|---|---|---|---|
| Package | 256-pin FTBGA (FTG256) | 256-pin FTBGA (FTG256) - same | 256-pin FTBGA (FTG256) - same | 256-pin FTBGA (FTG256) - same | 256-pin FTBGA (FTG256) - same | 256-pin FTBGA (FTG256) - same |
| Brand | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx | AMD Xilinx |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Logic Cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells | 33,280 cells |
| User I/O Count | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os | 170 I/Os |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Speed-Grade Difference | L1 ordering designation | -1 speed designation | -2 speed designation | -1 speed designation | -2 speed designation | -1 speed designation |
| Temperature Ordering Suffix | I industrial-temperature designation | I industrial-temperature designation | I industrial-temperature designation | C commercial-temperature designation | C commercial-temperature designation | E extended-temperature designation |
| Core Voltage Range | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V | 0.95 V to 1.05 V |
| Clock and DSP Resources | MMCM, PLL, and DSP processing resources | MMCM, PLL, and DSP processing resources | MMCM, PLL, and DSP processing resources | MMCM, PLL, and DSP processing resources | MMCM, PLL, and DSP processing resources | MMCM, PLL, and DSP processing resources |
Principais diferenciais
- Direct ordering-code fit with the same Artix-7 35T resources (vs XC7A35T-1FTG256I)
- Additional speed-grade choice without changing the PCB footprint (vs XC7A35T-2FTG256I)
- Industrial ordering designation aligned with extended-temperature equipment (vs XC7A35T-1FTG256C)
Notas de projeto
Use the official AMD XC7A35T FTG256 package pinout file and package drawing to establish every ball assignment. The device provides 170 user I/Os, while the remaining FTG256 balls handle power, ground, configuration, and dedicated functions. Place decoupling capacitors close to their associated supply balls, preserve the required via geometry beneath the BGA, and route high-speed and sensitive pairs according to the selected Vivado constraints.
Separate the FPGA's core and I/O supply requirements according to the manufacturer power-supply design guidance. The listed core operating range is 0.95 V to 1.05 V, but acceptable rail tolerance, sequencing, and current depend on the exact speed and temperature grade. Confirm steady-state and transient demand before sizing regulators, then verify that power-source sequencing does not violate the device's configuration and startup behavior.
Create clock, transceiver, and high-speed I/O constraints before implementation so that Vivado can evaluate the real board environment. The MMCM and PLL resources create related clocks, but source-synchronous interfaces can still require careful byte-lane alignment and I/O timing margin. Use the manufacturer's I/O standards and drive-strength guidance, and inspect implemented timing rather than treating the stated 464 MHz frequency as a universal system operating guarantee.
Do not approve a substitution based only on the FTG256 package name. Compare the full ordering suffix for speed grade and temperature grade, then confirm lifecycle, device identification, configuration behavior, power consumption, and post-route timing. The XC7A35T-1FTG256I, XC7A35T-2FTG256I, and commercial-temperature variants share the physical footprint but may require different firmware metadata, implementation constraints, or qualification decisions.
Informações de conformidade
The component is an industrial-temperature FPGA rather than an automotive-qualified device. Compliance attributes require confirmation from the manufacturer declaration associated with the exact ordering code.