XC7Z015-1CLG485C - 667MHz Zynq-7000 SoC | AMD
N.º da peça: XC7Z015-1CLG485C ✓ AtivoXC7Z015-1CLG485C Visão geral
A Zynq-7000 adaptive SoC is a heterogeneous system-on-chip that places an Arm processor system and FPGA fabric in one package. The processor subsystem supports Linux and standalone applications, while the FPGA fabric implements parallel data paths, custom interfaces, accelerators, and time-critical control logic. This integration reduces interconnects between the processor and programmable logic compared with a two-chip architecture while preserving the flexibility of FPGA-based hardware.
The XC7Z015 combines two Arm Cortex-A9 MPCore processors with CoreSight debug support and 74K Artix-7 logic cells. Its 667 MHz processor rating supports operating-system-based control, communications management, and application processing. The 150 FPGA I/O expand interface options for external memory, networking, industrial interfaces, image acquisition, and embedded peripherals. The integrated processor, memory interfaces, fabric, and I/O make the device suitable for compact embedded platforms where board area and system integration are priorities.
The CLG485 package uses a 19 mm by 19 mm CSP-BGA format and places 485 signal or power positions beneath the device. A 1.05 V supply rating is identified for the processor core, although the complete power architecture requires multiple rails and strict sequencing. The commercial-grade part is specified from 0°C to 85°C, making it appropriate for temperature-controlled industrial, communications, instrumentation, and test equipment rather than uncased automotive or extreme-temperature installations.
Typical applications include industrial control gateways, machine vision, communications infrastructure, test and measurement systems, embedded servers, and network appliances. In each case, the processor can run control-plane software while FPGA logic accelerates data movement, protocol handling, filtering, encryption, or sensor acquisition. The heterogeneous architecture is especially useful when deterministic parallel behavior and conventional operating-system support are both required.
Design work should begin with the AMD Zynq-7000 technical reference material and the CLG485 package placement diagram. Confirm every power rail, decoupling requirement, configuration interface, memory topology, and pin multiplexing decision against the manufacturer documentation. The 19 mm by 19 mm BGA also requires careful escape-routing planning, inspection access, and substrate-aware thermal design.
This product page consolidates the confirmed device identity, package information, operating limits, engineering use cases, compatible device variants, and selection considerations into one design-oriented reference for engineers evaluating the XC7Z015-1CLG485C.
Alternativas drop-in para XC7Z015-1CLG485C — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XC7Z015-1CLG485C (mesmo formato e footprint) — diferindo em Mounting Type, Product Type, Debug Support, FPGA Logic Cells, Package.
XC7Z015-1CLG485I
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7Z015-L1CLG485I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7Z015-2CLG485E
✅ Drop-InConsulte o preço
Ver ficha técnica →XC7Z015-1CLG485C4385
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7Z015-CLG485
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XC7Z015-1CLG485C Classificações máximas e características elétricas
| Product Type | Zynq-7000 adaptive system-on-chip with integrated FPGA |
| Processor Core | Dual-core Arm Cortex-A9 MPCore |
| Processor Clock Rating | 667 MHz |
| FPGA Family | Artix-7 |
| FPGA Logic Cells | 74K logic cells |
| Programmable FPGA I/O | 150 I/O |
| Processor System I/O | 130 PS I/O |
| Debug Support | CoreSight |
| Encapsulamento | 485-CSPBGA, 19 mm x 19 mm |
| JEDEC Package Code | S-PBGA-B485 |
| Core Supply Voltage | 1.05 V |
| Minimum Operating Temperature | 0 °C |
| Maximum Operating Temperature | 85 °C |
| Temperature Grade | Commercial |
| Speed Grade | Grade 1 |
| Tipo de montagem | Surface-mount BGA |
Guia de Configuração de Pinos do XC7Z015-1CLG485C s-pbga-b485
Configuração de pinos para XC7Z015-1CLG485C (pacote s-pbga-b485). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XC7Z015-1CLG485C.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XC7Z015-1CLG485C é adequado para 6 aplicaçãos: Industrial Control Gateway, Machine Vision Accelerator, Network Protocol Appliance, Test and Measurement System, Secure Embedded Server, Sensor Hub and Edge Analytics.
Industrial Control Gateway
The XC7Z015-1CLG485C fits an industrial control gateway that must combine network management, deterministic I/O, and local protocol acceleration. Its dual 667 MHz Arm Cortex-A9 cores can run the control plane, configuration services, and communications stack, while the 74K-cell Artix-7 fabric can implement parallel packet processing, custom bus bridges, or time-critical acquisition paths. The 130 PS I/O and 150 FPGA I/O provide flexible connections to Ethernet PHYs, serial links, memory, and isolated industrial interfaces. Use DDR memory for both processor execution and FPGA buffering, and validate the 0°C to 85°C commercial-temperature limit against the enclosure's worst-case ambient temperature.
Machine Vision Accelerator
The XC7Z015-1CLG485C is well suited to machine-vision controllers that must capture pixels, preprocess image data, and coordinate real-time machine actions. FPGA logic can implement parallel filtering, thresholding, line detection, or pixel-format conversion, while the Arm subsystem runs camera control, image-quality processing, and higher-level inspection software. Its 150 FPGA I/O offer substantial bandwidth for camera and memory interfaces, and the 74K logic cells support moderate pipelined accelerator designs. The key design consideration is balancing DDR bandwidth, DMA transfers, image latency, and processor workload rather than selecting the device solely by logic-cell count.
Network Protocol Appliance
The XC7Z015-1CLG485C supports a network protocol appliance in which the Arm cores manage sessions, routing, configuration, and operating-system services while programmable logic accelerates header parsing, compression, encryption, or traffic classification. The integrated processor and FPGA architecture reduces the need for external acceleration components and permits low-latency movement between packet memory and parallel pipeline logic. The 130 PS I/O can connect management and control interfaces, while 150 FPGA I/O can feed multiple high-speed network data paths. Power and thermal analysis should include switching activity in the fabric because utilization-dependent FPGA power can dominate the processor-side budget.
Test and Measurement System
The XC7Z015-1CLG485C fits a test and measurement instrument requiring flexible sequencing, high-speed acquisition, and precise real-time processing. The dual Arm Cortex-A9 cores can execute test algorithms, instrument control, and user interfaces, while the Artix-7 fabric can implement counters, pattern generators, digital signal processing, or custom acquisition pipelines. Its 150 FPGA I/O allow the fabric to connect directly to test pins, while PS I/O handle USB, Ethernet, memory, and configuration functions. For laboratory equipment, the 0°C to 85°C specification is suitable only when the enclosure maintains that range; calibration, trigger timing, and analog front-end isolation remain external design responsibilities.
Secure Embedded Server
The XC7Z015-1CLG485C can serve as the central processor of a compact embedded server that needs conventional operating-system support alongside programmable security or storage functions. The dual 667 MHz Arm cores can execute networking, management, and application workloads, while FPGA logic can accelerate cryptographic operations, compression, data filtering, or storage data paths. The integrated fabric also allows custom hardware to be added without changing the main processor architecture. DDR memory capacity and bandwidth must be sized for both the operating system and DMA-intensive accelerator functions, while the 19 mm by 19 mm BGA demands careful PCB escape routing and thermal analysis.
Sensor Hub and Edge Analytics
The XC7Z015-1CLG485C supports a sensor hub that combines multiple sensor inputs with local edge analytics. The FPGA fabric can acquire and filter parallel sensor channels, perform timing-sensitive conditioning, and transfer only useful events to DDR memory. The dual Arm Cortex-A9 subsystem can then execute threshold logic, device management, protocol conversion, and higher-level analytics. Its 130 PS I/O and 150 FPGA I/O allow custom sensor and communication interfaces to coexist with processor-side peripherals. Design the interconnect around sustained data rates, buffer depth, and worst-case processor load rather than relying on nominal peak bandwidth, and use the manufacturer power-estimation workflow to establish the thermal design.
Dados de referência de engenharia para XC7Z015-1CLG485C — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XC7Z015-1CLG485I | XC7Z015-L1CLG485I | XC7Z015-2CLG485E | XC7Z015-1CLG485C4385 | XC7Z015-CLG485 |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) |
| Device Family | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC | Zynq-7000 adaptive SoC |
Principais diferenciais
- Integrated processor and FPGA architecture (vs XC7Z015-2CLG485E)
- Commercial-temperature configuration (vs XC7Z015-1CLG485I)
- Broad programmable interface capacity (vs XC7Z015-CLG485)
- Identifiable exact ordering configuration (vs XC7Z015-1CLG485C4385)
Notas de projeto
The XC7Z015-1CLG485C requires a complete multi-rail power design; the identified 1.05 V core supply does not represent the voltage of every power input. Follow the AMD Zynq-7000 power-sequencing and decoupling guidance, use the recommended regulator topology, and verify the power-up order with instrumentation before enabling the FPGA fabric. Estimated: power dissipation equals total input power minus output power, but actual device dissipation must be derived from the AMD power-estimation methodology using processor utilization, FPGA toggle rates, I/O activity, and ambient temperature.
Treat the 485-CSPBGA as a complex fine-pitch routing problem. Use the official CLG485 package placement diagram and package-device pinout files when defining the symbol, footprint, and board escape strategy. Preserve access to configuration, JTAG, clock, reset, and reference-voltage pins, and route power and ground planes with the shortest practical paths from regulators and decoupling capacitors. Verify pad-stack geometry, solder-mask design, assembly process, and X-ray inspection requirements with the selected PCB fabricator.
Zynq-7000 power depends strongly on FPGA switching activity, processor loading, and I/O throughput, so a nominal logic-cell count does not predict junction temperature. Use the manufacturer power-estimation workflow before selecting copper area or cooling hardware, then validate the assembled board at maximum clock, memory, and I/O activity. Estimated: junction rise equals dissipated power multiplied by the effective board-and-package thermal resistance; measure that resistance on the actual PCB rather than relying on a generic package value.
Do not treat CLG485 variants as automatically interchangeable merely because the package is identical. A replacement can change speed grade, temperature range, lifecycle ordering, or qualification attributes even when its footprint is unchanged. For an XC7Z015-CLG485 update, compare the exact ordering codes, processor rating, temperature grade, supported tool flow, and any customer-specific configuration. Also avoid assigning the 485-CSPBGA identifier to a 484-position BGA footprint without checking the AMD package drawing and ball map.
Informações de conformidade
The commercial XC7Z015-1CLG485C is not identified as an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-mineral statements require confirmation from the current manufacturer product declaration.