XCKU040-2SFVA784I - Kintex UltraScale FPGA, 468 I/O | AMD
N.º da peça: XCKU040-2SFVA784I ✓ AtivoXCKU040-2SFVA784I Visão geral
A field-programmable gate array is a reconfigurable digital semiconductor whose logic, interconnect, and I/O behavior are configured after manufacture. Within the semiconductor hierarchy, an FPGA is a programmable logic device, while a Kintex UltraScale FPGA adds advanced DSP, memory, high-speed I/O, clocking, and system integration capabilities. This makes the XCKU040 suitable when fixed logic would be inflexible and a software-driven processor would not provide sufficient deterministic parallelism or timing performance.
Key features include 468 available I/O, the -2 speed grade, a 784-ball BFBGA package, and operation across the industrial temperature range of -40 °C to 100 °C junction temperature. The -2 grade provides higher static performance than the -1 grade and sits below the -3 grade in the documented Kintex UltraScale speed ordering. The large I/O count supports interfaces to memory, networking, accelerators, control logic, and external peripheral devices.
The device belongs to the XCKU040 Kintex UltraScale family, whose programmable resources support parallel datapaths, protocol handling, signal processing, and control-plane functions. Although the package exposes a large number of connections, a complete board design still depends on the selected bank voltage, memory interface, clocking architecture, pin assignments, and device-specific configuration. High-performance BFBGA packages also require careful power delivery, via-in-pad and through-via strategy, thermal design, and assembly-process control.
Typical applications include network packet processing, industrial automation, high-speed data acquisition, fixed-function accelerators, embedded vision, telecommunications infrastructure, and test equipment. In these systems, the FPGA can implement parallel logic directly in hardware, reducing processor overhead and supporting deterministic timing. The 468-I/O resource can also divide into multiple banks, allowing a designer to interface logic, memory, and external circuitry while respecting voltage and timing constraints.
A key design consideration is that changing speed grade does not change the basic device family, but it can alter timing margins and power characteristics. Verify the complete Vivado design, pin constraints, power estimates, and board-level timing before substituting a different grade. For the -2 device, use the AMD documentation package and board-design guidance for SFVA784 power, decoupling, configuration, and thermal implementation.
This page combines the verified device identity, package, I/O, temperature, and speed-grade information with practical application guidance, comparison parameters, and design considerations for engineers planning an SFVA784 Kintex UltraScale implementation.
Alternativas drop-in para XCKU040-2SFVA784I — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XCKU040-2SFVA784I (mesmo formato e footprint) — diferindo em Package, Device Type, Industrial Junction Temperature, Speed Grade.
XCKU040-1SFVA784I
✅ Drop-InConsulte o preço
Ver ficha técnica →XCKU040-L1SFVA784I
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XCKU040-3SFVA784I
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
XCKU040-2SFVA784I Classificações máximas e características elétricas
| Device Type | Kintex UltraScale FPGA |
| Architecture | Kintex UltraScale |
| Manufacturer | AMD |
| Process Technology | 20 nm |
| Performance Speed Grade | -2 |
| Available Speed Grades in Family | -3, -2, -1, and -1L |
| Available I/O | 468 I/O |
| Encapsulamento | 784-BFBGA, FCCSP |
| Package Pin Count | 784 balls |
| Tipo de montagem | Surface mount |
| Industrial Junction Temperature | -40 °C to 100 °C |
Guia de Configuração de Pinos do XCKU040-2SFVA784I 784 balls
Configuração de pinos para XCKU040-2SFVA784I (pacote 784 balls). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XCKU040-2SFVA784I.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XCKU040-2SFVA784I é adequado para 6 aplicaçãos: Industrial Automation and Control, Network Packet Processing, High-Speed Data Acquisition, Fixed-Function Signal Accelerator, Test and Measurement Equipment, Aerospace and Defense Control.
Industrial Automation and Control
XCKU040-2SFVA784I fits industrial controllers that combine deterministic control logic with numerous field-bus, sensor, actuator, and safety-system interfaces. Its 468 I/O provide substantial connectivity, while the -2 speed grade supports more demanding sequential control than the lower -1 grade. The device can execute protocol conversion, machine sequencing, and real-time data processing in parallel rather than relying entirely on a processor. Operation from -40 °C to 100 °C junction temperature supports industrial thermal objectives. Engineering teams should partition I/O into compatible voltage banks, place decoupling and configuration resources according to AMD guidance, and use Vivado timing analysis to verify both control-loop latency and inter-bank interface timing.
Recomendado
Network Packet Processing
The XCKU040-2SFVA784I is suitable for high-throughput network functions requiring parallel classification, filtering, queue management, or protocol handling. Its 468 I/O allow multiple packet-processing interfaces to coexist within one programmable device, while the -2 grade improves timing headroom for wide pipelines. A typical design assigns high-speed I/O to networking or memory interfaces and uses fabric resources for header parsing and buffering control. Engineers must confirm each interface’s maximum data rate against the selected bank voltage and device-speed constraints. High-speed signal-integrity analysis, power-plane partitioning, clock jitter budgeting, and complete post-route timing verification are essential before the FPGA is released for production networking equipment.
Recomendado
High-Speed Data Acquisition
XCKU040-2SFVA784I can serve as the central digital engine in high-speed acquisition systems by capturing parallel data, performing real-time filtering, and transferring results to memory or processing logic. The 468-I/O count supports multiple converters, clocks, triggers, and high-speed interfaces, while the -2 grade provides additional timing margin for demanding acquisition pipelines. A practical implementation separates sensitive input banks, configures appropriate I/O standards, and places interface logic close to the relevant BGA balls to reduce signal-integrity risk. Because the package contains 784 balls, board designers should use the AMD-recommended escape and routing strategy, maintain continuous power planes, and verify channel-to-channel skew and post-placement timing in Vivado before fabrication.
Recomendado
Fixed-Function Signal Accelerator
XCKU040-2SFVA784I is appropriate for fixed-function accelerators that require deterministic throughput without the overhead of a general-purpose processor. Parallel lanes, arithmetic pipelines, and control state machines can be implemented in programmable logic, allowing repeatable operation across industrial, scientific, and communications systems. Its 468 I/O can connect source data, external memory, and result channels while keeping timing-critical paths inside the FPGA fabric. The -2 speed grade is preferable when the design cannot close timing at the -1 grade. Designers should compare DSP, block-RAM, and I/O utilization in Vivado, account for routing congestion in the large BFBGA package, and evaluate clock power, signal integrity, and thermal margins under worst-case traffic rather than nominal activity.
Recomendado
Test and Measurement Equipment
The XCKU040-2SFVA784I can coordinate complex test systems that combine acquisition, stimulus generation, pattern processing, and data export. Its extensive I/O supports instrument control and high-speed measurement connections, while the -2 grade improves the available timing margin for pipelined digital algorithms. An instrument designer can place trigger logic, counters, digital preprocessing, and interface controllers in programmable hardware for repeatable performance. The industrial junction-temperature range makes the device relevant to laboratory and production-test environments with controlled thermal design, although the enclosure ambient can affect the actual junction temperature. Exact pin constraints, supported I/O standards, clocking resources, and implementation timing should be reviewed for the selected SFVA784 device before schematic and PCB signoff.
Recomendado
Aerospace and Defense Control
XCKU040-2SFVA784I can support aerospace, defense, and mission-critical control subsystems when the complete board meets the applicable environmental and qualification requirements. The device combines deterministic programmable logic with 468 I/O and a -2 speed grade, allowing sensor fusion, navigation processing, communication bridging, and actuator control to share a single device. Its -40 °C to 100 °C junction range covers an industrial temperature band, but system qualification extends beyond this component rating. Engineering teams must assess radiation effects, extended-temperature behavior, supply continuity, configuration integrity, functional safety, and board-level environmental requirements. Pin assignment, power sequencing, clock startup, and recovery behavior should be validated against the exact AMD documentation before the device is used in a safety- or mission-critical architecture.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XCKU040-2SFVA784I — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XCKU040-1SFVA784I | XCKU040-L1SFVA784I | XCKU040-3SFVA784I |
|---|---|---|---|---|
| Package | 784-BFBGA, FCCSP | 784-BFBGA, FCCSP | 784-BFBGA, FCCSP | 784-BFBGA, FCCSP |
| Brand | AMD | AMD | AMD | AMD |
| Device Family | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Performance Speed Grade | -2 | -1 | -1L | -3 |
| Available I/O | 468 I/O | 468 I/O | 468 I/O | 468 I/O |
| Process Technology | 20 nm | 20 nm | 20 nm | 20 nm |
| Static Power Screening | Standard -2 grade | Standard -1 grade | Lower maximum static-power screening | Standard -3 grade |
Principais diferenciais
- Higher performance tier than the lower-speed same-package alternative (vs XCKU040-1SFVA784I)
- Performance headroom above the lower-power -1L option (vs XCKU040-L1SFVA784I)
- Balanced speed tier below the maximum-performance family option (vs XCKU040-3SFVA784I)
- Substantial mixed I/O capacity in a single surface-mount device (vs XCKU040-1SFVA784I)
Notas de projeto
Treat the -40 °C to 100 °C rating as a junction-temperature limit, not an enclosure specification. Estimate worst-case junction temperature from implemented FPGA power, package thermal behavior, PCB copper, airflow, and neighboring heat sources. Keep the BFBGA power and ground planes continuous, use the AMD-recommended thermal-via arrangement, and verify the assembled board at maximum ambient temperature with the design operating at realistic utilization.
A 784-BFBGA package demands controlled escape routing and power delivery. Follow the SFVA784 PCB guidance for ball-pitch, via-in-pad, solder-mask, and thermal-via requirements. Keep high-speed interface routing short, provide low-impedance reference planes, and separate sensitive and noisy supply paths. Do not finalize the board from I/O counts alone; bank assignments and pin constraints from the exact device must be checked in Vivado.
Do not assume that a same-package speed-grade substitution preserves timing closure. XCKU040-1SFVA784I is lower in the speed ordering than the -2 target, while the -1L option has a different voltage and power profile. After any substitution, rerun synthesis or device configuration, place-and-route, static timing analysis, power estimation, and bitstream-generation checks. Also revalidate pin constraints, configuration behavior, and board-level sequencing.
Assign every external interface to a compatible I/O bank and verify the resulting voltage, drive strength, slew, and timing limits. High-speed interfaces require exact source-synchronous or chip-to-chip timing constraints rather than generic timing exceptions. Check reference-plane continuity, return paths, clock jitter, and layer transitions during PCB stack-up review, then use the completed routed design to confirm external interface timing.
Plan the supply network from worst-case dynamic demand rather than average activity. The -1L alternative is explicitly associated with lower maximum static-power screening and can operate at 0.95 V or 0.90 V VCCINT, so its power architecture may differ from the -2 device. Confirm the selected speed grade’s required rail voltages and sequencing in the AMD documentation before finalizing regulators, decoupling, power-plane splits, and startup behavior.
Informações de conformidade
Compliance declarations for the exact XCKU040-2SFVA784I ordering code were not present in the verified product information and require confirmation from AMD or the authorized supply channel.