XMC4200F64K256ABXQSA1 - 80MHz Cortex-M4 MCU | Infineon
N.º da peça: XMC4200F64K256ABXQSA1 ✓ AtivoXMC4200F64K256ABXQSA1 Visão geral
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. The XMC4200 combines an ARM Cortex-M4 processor with embedded Flash and SRAM, forming a complete embedded-processing platform within the hierarchy of MCU, 32-bit microcontroller, embedded controller, and industrial semiconductor. Its on-chip memory allows firmware, configuration data, and real-time control routines to operate without external memory in many designs.
The principal device characteristics include an 80 MHz Cortex-M4 core, 256 KB program Flash, and 40 KB SRAM. The 64-pin LQFP package also provides an exposed pad according to the component listing, improving heat transfer from the microcontroller to the PCB. Operation from a 1.3 V or 3.3 V supply is identified in the product listing, allowing the device to support both lower-voltage core operation and conventional 3.3 V industrial interfaces.
The ARM Cortex-M4 architecture uses a 32-bit instruction set and supports efficient interrupt-driven control, which is useful when deterministic response and low-latency peripheral handling are required. The XMC4000 family is designed for industrial applications, where a microcontroller must combine general-purpose processing with communication and control peripherals. Its industrial positioning makes it applicable to equipment controllers, embedded automation nodes, and connected industrial sensing systems.
Typical applications include industrial motor and motion control, industrial communication gateways, programmable automation controllers, embedded measurement systems, and compact control equipment. For these uses, the 256 KB Flash capacity provides useful code and configuration space, while the 40 KB SRAM supports working memory, buffers, stacks, and real-time data processing without immediately requiring external memory.
PCB design should account for the exposed-pad thermal path and the device's 64-pin perimeter footprint. The exposed pad must be connected to the appropriate supply and ground planes according to the manufacturer pin-description table, while supply decoupling should be placed close to the power pins. Firmware integration also requires assigning the correct peripheral pins, clocks, and interrupt sources for the intended industrial control function.
This product record combines the exact ordering identity, core and memory specifications, package information, sourcing guidance, comparison data, and practical integration notes. These engineering details help designers determine whether the XMC4200F64K256ABXQSA1 fits an existing PCB and whether any proposed substitution preserves both its electrical and mechanical requirements.
Alternativas drop-in para XMC4200F64K256ABXQSA1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com XMC4200F64K256ABXQSA1 (mesmo formato e footprint) — diferindo em Architecture, Operating Supply Voltage, Package, Product Family.
XMC4200F64K256BAXQSA1
✅ Drop-InConsulte o preço
Ver ficha técnica →XMC4200F64K256ABXQSA1 Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Product Family | XMC4000 |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| SRAM | 40 KB |
| Tensão de alimentação de operação | 1.3 V or 3.3 V |
| Encapsulamento | PG-LQFP-64 |
| Contagem de pinos | 64 pins |
| Exposed Pad | Present |
| Tipo de montagem | Surface mount |
| Delivery Format | Tray |
| Application Classification | Industrial |
Guia de Configuração de Pinos do XMC4200F64K256ABXQSA1 pg-lqfp-64
Configuração de pinos para XMC4200F64K256ABXQSA1 (pacote pg-lqfp-64). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XMC4200F64K256ABXQSA1.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XMC4200F64K256ABXQSA1 é adequado para 6 aplicaçãos: Industrial Equipment Controller, Programmable Automation Controller, Embedded Measurement System, Motor and Motion Controller, Industrial Communication Gateway, Embedded Sensor Hub.
Industrial Equipment Controller
The XMC4200F64K256ABXQSA1 fits compact industrial equipment controllers that combine real-time sequencing with local program storage and moderate data buffering. Its 80 MHz ARM Cortex-M4 core supports responsive interrupt-driven control, while 256 KB of Flash accommodates application firmware, configuration tables, and update logic. The 40 KB SRAM provides space for working variables, communication buffers, and real-time state. Implementing the device in a 64-pin PG-LQFP design also allows peripheral selection without an exposed-pad footprint change. Final qualification should verify the required industrial peripherals, temperature range, isolation strategy, and safety functions.
Programmable Automation Controller
For programmable automation equipment, the XMC4200F64K256ABXQSA1 provides an 80 MHz control platform with 256 KB of internal Flash and 40 KB of SRAM. That combination supports machine-state logic, I/O sequencing, diagnostics, and communications buffering within one compact controller. The ARM Cortex-M4 architecture is well suited to interrupt-heavy control loops where deterministic service of external events matters. A designer should map the selected XMC peripherals to the required actuator and sensor interfaces, then reserve clean routing and decoupling around the exposed pad and supply pins.
Embedded Measurement System
The XMC4200F64K256ABXQSA1 can serve as the processing center of an embedded measurement instrument when local control, calibration data, and real-time filtering are required. Its 80 MHz Cortex-M4 core handles acquisition sequencing and signal-processing tasks, while 40 KB of SRAM accommodates sample buffers and working data. The 256 KB Flash region is useful for firmware, lookup tables, calibration constants, and communication protocols. Before selecting the device, confirm that the chosen XMC4200 variant includes the required ADC, timer, and communications resources and that analog signal conditioning is designed for the application's precision and noise requirements.
Motor and Motion Controller
The XMC4200F64K256ABXQSA1 is suitable for embedded motion-control logic where an 80 MHz processor must manage position or speed decisions, sequencing, and protection handling. Its 256 KB Flash stores control algorithms and parameter sets, and its 40 KB SRAM supports state-machine data and control-loop calculations. The device is used as the supervisory controller around power stages rather than as a high-voltage switch itself. Pin assignment, timer capability, PWM resources, encoder interfaces, and thermal limits must be checked against the selected motor-drive architecture before PCB release.
Industrial Communication Gateway
In an industrial communications gateway, the XMC4200F64K256ABXQSA1 can combine protocol processing with local control and data buffering. The 80 MHz Cortex-M4 core handles protocol state machines and network traffic, while 40 KB of SRAM supports receive and transmit buffers. Its 256 KB of internal Flash holds gateway firmware, protocol configuration, and device data. The 64-pin LQFP package provides a practical option for compact controller boards, but the engineer must confirm the exact communication peripherals and package pin multiplexing in the Infineon pin-description table before assigning bus, interface, and isolation signals.
Embedded Sensor Hub
The XMC4200F64K256ABXQSA1 works as a local sensor-hub processor when multiple inputs must be conditioned, evaluated, and reported through a local communications interface. Its 80 MHz core supports time-based sampling and control tasks, while 40 KB of SRAM provides temporary storage for measurements and protocol frames. The 256 KB Flash capacity is adequate for embedded firmware and lookup data in many compact systems. Use of the device for this role depends on the available ADC and digital I/O resources, input signal ranges, update latency, and environmental limits. The exposed pad and supply network should be laid out to maintain stable operation under sustained processing load.
Dados de referência de engenharia para XMC4200F64K256ABXQSA1 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XMC4200F64K256BAXQSA1 |
|---|---|---|
| Package | PG-LQFP-64 | PG-LQFP-64 |
| Brand | Infineon Technologies | Infineon Technologies |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 256 KB |
| SRAM | 40 KB | 40 KB |
| Architecture | 32-bit RISC | 32-bit RISC |
| Listed Package Temperature Code | PG-LQFP-64-6 | PG-LQFP-64-19 |
Principais diferenciais
- Closest same-family hardware candidate retains the principal compute and memory ratings (vs XMC4200F64K256BAXQSA1)
- Higher documented package temperature designation on the nearest candidate (vs XMC4200F64K256BAXQSA1)
- Exact ordering identity simplifies BOM and qualification traceability (vs XMC4200F64K256BAXQSA1)
Notas de projeto
The 64-pin LQFP includes an exposed pad, so its net should follow the manufacturer pin-description table and connect to the specified supply or ground plane. Provide uninterrupted copper beneath the device and minimize thermal-via resistance where the footprint allows. Avoid placing a keepout beneath the pad or extending high-current copper in a way that prevents a direct thermal path to the board plane.
Use the Infineon XMC4200 pin-description table to assign every port and dedicated-function signal before routing the board. Place decoupling capacitors close to the associated supply pins, keep the supply-plane connection compact, and route sensitive signals away from high-current switching nodes. Because exposed-pad connections are package-specific, copy the target suffix's pin and footprint data directly rather than relying on a generic LQFP-64 symbol.
Do not treat every Cortex-M4 microcontroller as a drop-in replacement. The XMC4200F64K256ABXQSA1 has a specific pinout, exposed-pad arrangement, memory organization, clock implementation, and peripheral mapping. Validate startup code, linker settings, interrupt vectors, pin multiplexing, and debugger configuration after any device change. A PCB footprint match alone does not guarantee software compatibility.
Preserve the manufacturer-recommended analog and digital grounding strategy when the selected XMC4200 variant uses mixed-signal peripherals. Keep analog inputs away from switching-node copper, route clocks as short and symmetric as practical, and place input filtering close to the device. Confirm the ADC, communications, and timer resources needed by the design are present in the exact ordering code before final schematic capture.
Informações de conformidade
The manufacturer describes the XMC4200 as an industrial ARM Cortex-M4 microcontroller. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not stated in the product information and must be confirmed from the current manufacturer compliance documentation.
