XMC4502-F100K768AB 120MHz 768KB MCU | Infineon
N.º da peça: XMC4502-F100K768AB ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.9592 | $6,96 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
XMC4502-F100K768AB Visão geral
An ARM Cortex-M4 microcontroller is a 32-bit embedded processor based on the ARM architecture, combining a processor core, memory, interrupt handling, and peripherals on one integrated circuit. The XMC4500 family belongs to the industrial microcontroller hierarchy and is positioned between general-purpose embedded processors and more specialized control devices. Its role is to execute control software while managing communication, timing, analog, and digital I/O functions in equipment such as industrial controllers and connected automation systems.
The verified product information identifies the device as an ARM Cortex-M4 XMC4000-series microcontroller with 120 MHz processing and 768 KB flash. The part is listed in a PG-LQFP-100-11 package, a 100-pin plastic low-profile quad flat package. The package provides a large number of external pins for power, ground, debug, communications, timers, analog functions, and digital I/O. Additional details such as SRAM size, operating voltage range, temperature limits, and Ethernet transceiver specifications are not provided in the retrieved data and therefore require confirmation from the manufacturer datasheet.
The XMC4500 family is intended for real-time critical systems, where predictable control response and integrated peripherals can reduce the need for separate interface components. According to the retrieved Infineon product information, the family is associated with industrial ARM Cortex-M4 devices for real-time applications. The Cortex-M4 platform is widely used for embedded control because it supports efficient interrupt-driven software and a broad software ecosystem, including CMSIS-based development workflows.
Typical applications include industrial automation equipment, Ethernet-connected control systems, motor and motion-control platforms, building automation controllers, communications equipment, and test systems. The available MPN is especially relevant where a 120 MHz core, 768 KB flash configuration, and 100-pin package are required together. Selection should account for the exact peripheral set, memory map, electrical limits, pin multiplexing, package dimensions, and software support required by the target product.
For PCB implementation, treat the PG-LQFP-100-11 footprint and pin multiplexing as design-controlled constraints. Confirm the manufacturer's land pattern, exposed-pad or thermal requirements, decoupling recommendations, and recommended operating region before release to production. This page synthesizes verified distributor information, official product references, available pricing signals, and engineering-oriented selection guidance without inventing unprovided electrical specifications.
Alternativas drop-in para XMC4502-F100K768AB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
XMC4502-F100F768-AC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMC4502-F100K768-AC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMC4502F100K768ACXQMA1
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMC4502-F100K768AB
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →XMC4502-F100K768AB Classificações máximas e características elétricas
| Product Type | 32-bit ARM Cortex-M4 industrial microcontroller |
| Processor Core | ARM Cortex-M4 |
| CPU Frequency | 120 MHz |
| Flash Memory | 768 KB |
| Architecture | 32-bit |
| Product Series | XMC4000 series |
| Application Segment | Industrial embedded control |
| Encapsulamento | PG-LQFP-100-11 |
| Package Type | 100-pin LQFP |
| Tipo de montagem | Surface mount |
| Ethernet Support | Ethernet MAC identified in verified product information |
| Software Ecosystem | CMSIS-based ARM Cortex-M development workflow |
| Real-Time Control | Designed for real-time critical systems |
| RoHS | RoHS mentioned in distributor product listing; exact declaration not provided |
Guia de Configuração de Pinos do XMC4502-F100K768AB 100-pin lqfp
Configuração de pinos para XMC4502-F100K768AB (pacote 100-pin lqfp). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para XMC4502-F100K768AB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
XMC4502-F100K768AB é adequado para 6 aplicaçãos: Industrial Automation Controller, Ethernet-Connected Control Equipment, Motor and Motion Control, Building Automation Equipment, Communications Equipment, Test and Measurement Products.
Industrial Automation Controller
XMC4502-F100K768AB fits an industrial automation controller that needs deterministic control software and multiple external signals. The 120 MHz ARM Cortex-M4 core provides a substantial processing headroom for sequencing, state machines, diagnostics, and communications, while 768 KB flash supports application code and protocol configuration. Its PG-LQFP-100-11 package exposes a large pin count for digital I/O, timers, debug, communications, and analog functions. Before schematic release, confirm the exact voltage, timer, ADC, communications, and temperature requirements against the Infineon datasheet.
Recomendado
Ethernet-Connected Control Equipment
XMC4502-F100K768AB is suitable for Ethernet-connected equipment when the exact XMC4502 variant provides the required MAC and external network interface. The 120 MHz Cortex-M4 core can handle application logic alongside Ethernet tasks, and 768 KB flash can store firmware, protocol configuration, and diagnostic data. The design should reserve the correct Ethernet pins, provide the required clocks and magnetics or PHY interface, and validate packet timing under the target load. The retrieved information confirms Ethernet-related family functionality but does not specify the AB suffix's complete PHY configuration.
Recomendado
Motor and Motion Control
XMC4502-F100K768AB can serve as the supervisory controller in a motor-control or motion-control system. Its 120 MHz processing core is suitable for coordinating PWM channels, encoder inputs, fault handling, communications, and control-loop supervisory logic, while the 100-pin package provides access to many control and communication signals. Exact timer channels, PWM resolution, encoder interfaces, and electrical timing must be verified for the specific XMC4502 order code. Use the manufacturer timing and peripheral documentation before setting control-loop update rates.
Recomendado
Building Automation Equipment
XMC4502-F100K768AB is appropriate for building-automation controllers, room-control units, HVAC supervisory controllers, and networked equipment interfaces. The industrial Cortex-M4 platform supports deterministic embedded logic, while 768 KB flash can accommodate communications protocols, configuration data, and application firmware. The broad PG-LQFP-100-11 pin count can simplify access to sensors, relays, communication transceivers, and debug functions. Validate low-power requirements, operating temperature, watchdog behavior, brownout response, and peripheral availability because these parameters are not specified in the retrieved data.
Recomendado
Communications Equipment
XMC4502-F100K768AB can support communications equipment that combines local real-time control with an external network interface. The 120 MHz ARM Cortex-M4 processor provides enough performance for protocol processing, buffering, diagnostics, and supervisory tasks, and 768 KB flash offers code and configuration storage for embedded firmware. The family is associated with Ethernet functionality, but the exact peripheral and PHY arrangement must be confirmed for the AB ordering suffix. Plan the design around the manufacturer's package pinout, clock requirements, signal integrity, and transceiver recommendations.
Recomendado
Test and Measurement Products
XMC4502-F100K768AB is relevant to test and measurement instruments that require a fast embedded controller for sequencing, calibration, communication, and real-time data handling. The 120 MHz Cortex-M4 core and 768 KB flash can support instrument firmware and control algorithms, while the 100-pin package offers substantial external connectivity. Engineers should verify ADC performance, timer accuracy, analog interfaces, operating temperature, and watchdog features in the exact datasheet. The available verified data does not specify measurement accuracy or precision-analog resources, so those claims are not made here.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XMC4502-F100K768AB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XMC4502-F100F768-AC | XMC4502-F100K768-AC | XMC4502F100K768ACXQMA1 |
|---|---|---|---|---|
| Package | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 | PG-LQFP-100-11 |
| Brand | Infineon | Infineon | Infineon | Infineon |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 768 KB | 768 KB | 768 KB | 768 KB |
| Word Size | 32-bit | 32-bit | 32-bit | 32-bit |
Principais diferenciais
- Exact target part identification (vs XMC4502-F100F768-AC)
- Industrial Cortex-M4 positioning (vs STM32F072RBT6TR)
- High-speed flash configuration (vs XMC4502F100K768ACXQMA1)
Notas de projeto
Use the exact Infineon PG-LQFP-100-11 land pattern and pin numbering from the manufacturer package drawing. The 100-pin package leaves little room for footprint assumptions: verify pin-1 orientation, exposed thermal requirements, solder-mask clearance, paste volume, and assembly land geometry before releasing the PCB. The retrieved data identifies the package but does not provide the exact drawing, so do not derive dimensions from distributor images.
Plan the power tree around the manufacturer-defined supply pins, decoupling limits, voltage tolerances, and sequencing requirements. Do not assume that a 3.3 V rail, 5 V rail, or other supply is acceptable for the exact AB suffix; those values are not present in the verified data. Check the datasheet for absolute maximum ratings, operating voltage, current, brownout behavior, and power sequencing before connecting external modules.
Do not treat an XMC4502 family member with a similar suffix as an automatic drop-in replacement. The verified cross-reference results identify related Infineon variants, but they do not establish every package, qualification, temperature, lifecycle, or ordering-code difference. Compare the exact MPN, pinout, electrical limits, memory map, peripheral set, and software device pack before substitution.
If the design uses Ethernet, keep the controller-side signals routed according to the exact reference design and the external PHY or transceiver requirements. Confirm clock source, magnetics or PHY selection, termination, impedance, isolation, and connector layout from the applicable Infineon guidance. The verified material confirms Ethernet-related family functionality but does not provide the complete electrical interface for the AB suffix.
Informações de conformidade
RoHS is mentioned in an LCSC product listing, but the retrieved data does not provide a formal manufacturer declaration. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are unknown.
