XMLP025BC11F - 25 bar Pressure Sensor, 0.5-4.5V, G1/4 | Schneider
N.º da peça: XMLP025BC11F ⚠ Última compra| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $134.4 | $134,40 |
| 10 | $121 | $1.210,00 |
| 100 | $108.5 | $10.850,00 |
| 500 | $96.75 | $48.375,00 |
| 1.000 | $87.2 | $87.200,00 |
XMLP025BC11F Visão geral
A pressure sensor is a transducer that converts an applied fluid pressure into a proportional electrical signal, and within the broader sensor taxonomy it belongs to the measurement-sensor family alongside temperature, flow, and level sensors. In an industrial control hierarchy, the XMLP pressure transmitter typically feeds an analogue input module of a PLC, a SCADA remote terminal unit, or a microcontroller-based data-acquisition front end, providing real-time hydraulic or pneumatic pressure data for closed-loop control and condition monitoring.
Key differentiating features of the XMLP025BC11F include a wide 0 bar to 25 bar operating range with proof pressure of 75 bar and burst pressure of 150 bar, ±0.1 % repeatability per IEC 61298-2, ±1 % linearity (typical), and ratiometric 0.5-4.5 V output that cancels 5 V supply drift. The compact stainless-steel body with FPM seal supports air, fresh water, hydraulic oil, gas, and refrigeration fluids, eliminating the need for separate sensor SKUs per media type. The robust EN 175301-803-A connector supports field replacement without rewiring.
At the silicon level the XMLP series relies on a piezoresistive Wheatstone bridge diffused into a stainless-steel diaphragm, laser-trimmed for offset and span, then conditioned by an Application-Specific Integrated Circuit (ASIC) providing ratiometric output, reverse-polarity protection, and short-circuit safeguards. The amplifier stage is calibrated so that 0.5 V corresponds to 0 bar and 4.5 V corresponds to 25 bar with a typical linearity of ±0.5 % of the full scale. The device is supplied with a traceability code per Schneider lot conventions and conforms to CE, UL, and CCC features.
Typical applications include hydraulic-press pressure verification on machine tools, HVAC chilled-water and refrigerant line monitoring, compressed-air system pressure trending, injection-moulding clamp force feedback, and pump-discharge pressure supervision. In each case the 0.5-4.5 V ratiometric signal interfaces directly with industrial analogue inputs that expect a 0-5 V or 0-10 V proportional reading.
When designing with the XMLP025BC11F, observe the 75 bar proof-pressure limit during transients such as water-hammer events, ensure the 5 V supply regulation stays within ±0.25 V to preserve ratiometric accuracy, and torque the G1/4 male fitting to 25-30 N·m using a thread sealant compatible with FPM/Viton. This part is now in end-of-commercialization status as of May 31, 2023, so design-in for new projects should target the active XMLP platform variants such as XMLP025BC71F.
This page synthesizes distributor stock, end-of-life status from the Telemecanique Sensors product page, application guidance, and drop-in alternative constraints not found in the manufacturer datasheet alone.
Alternativas drop-in para XMLP025BC11F — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
XMLP025BC71F
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMLP025BC11E
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMLP025BC11D
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMLP025BC11M12
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMLP025BC11A
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
XMLP025BC11F Classificações máximas e características elétricas
| Product Type | Electronic pressure sensor / transmitter |
| Sensor Family | OsiSense XM (XMLP series) |
| Operating Pressure Range | 0 bar to 25 bar |
| Maximum Overload Pressure (Proof) | 75 bar |
| Burst Pressure | 150 bar |
| Tipo de saída | Analogue, 3-wire ratiometric voltage |
| Output Signal | 0.5 V to 4.5 V DC |
| Tensão de alimentação | 5 V DC SELV |
| Current Consumption | 7 mA nominal |
| Process Connection | G1/4 A male, conforms to DIN 3852-E |
| Electrical Connection | EN 175301-803-A (DIN 43650) 3-pin male connector |
| Seal Material | FPM (Viton) |
| Compatible Media | Air, fresh water, hydraulic oil, gas, refrigeration fluid |
| Media Temperature Range | -30 °C to +135 °C |
| Repeatability | ±0.1 % per IEC 61298-2 |
| Linearity | ±1 % of full scale (typical) |
| Tipo de montagem | Threaded in-line / panel mount |
| Body Material | Stainless steel |
| Compliance | CE, UL, CCC, RoHS |
Configuração de pinos do XMLP025BC11F
| Pino 1 | +V (Supply) — 5 VDC SELV supply voltage (4.75 V to 5.25 V) |
| Pino 2 | Vout — Ratiometric analogue output, 0.5 V to 4.5 V (0 bar to 25 bar) |
| Pino 3 | GND — Common ground reference for supply and output |
Aplicações típicas
XMLP025BC11F é adequado para 6 aplicaçãos: Hydraulic Press Pressure Verification, HVAC Chilled Water Line Monitoring, Compressed Air System Pressure Trending, Injection Moulding Clamp Force Feedback, Pump Discharge Pressure Supervision, Mobile Equipment Hydraulic System Monitoring.
Hydraulic Press Pressure Verification
The XMLP025BC11F fits hydraulic press force-pressure verification with its 0 bar to 25 bar range covering most forming and stamping tonnage loads. The 0.5 V to 4.5 V ratiometric output feeds directly into a PLC analogue-input module scaled 10 mm pressure per volt, while the FPM seal survives petroleum and synthetic hydraulic oils at up to 135 °C. Its 75 bar proof-pressure rating provides headroom against water-hammer spikes generated by rapid valve closures, and the ±0.1 % repeatability ensures consistent cycle-to-cycle press calibration.
Recomendado
HVAC Chilled Water Line Monitoring
The XMLP025BC11F is well-suited to HVAC chilled-water and refrigeration line monitoring because its 0 bar to 25 bar span covers the typical 5 bar to 15 bar operating envelope of commercial chiller loops. The -30 °C to +135 °C media temperature rating permits use on both chilled-water and hot-water distribution pipes, while the FPM seal resists glycol-based heat-transfer fluids. The 0.5 V to 4.5 V ratiometric output integrates directly with building-automation analogue-input cards such as the Schneider SmartX AS-B, avoiding the need for shunt resistors used with 4-20 mA loops.
Recomendado
Compressed Air System Pressure Trending
For compressed-air systems the XMLP025BC11F delivers 0 bar to 25 bar measurement that aligns with typical 7 bar to 10 bar shop-air distribution pressures. The G1/4 A male fitting per DIN 3852-E mates directly with standard pneumatic manifolds, and the 7 mA current draw allows many sensors to share a single 5 V power supply. The 0.5 V to 4.5 V output simplifies trend graphs because 1 V corresponds to 6.25 bar of pressure, and the EN 175301-803-A connector supports quick field replacement without disturbing the air-line plumbing.
Recomendado
Injection Moulding Clamp Force Feedback
On injection-moulding machines the XMLP025BC11F provides clamp-force pressure feedback in the 0 bar to 25 bar hydraulic range where mould protection circuits operate. The EN 175301-803-A connector and ratiometric 0.5 V to 4.5 V signal let it integrate with legacy moulding-machine controllers that expect this format, while the ±1 % linearity ensures the clamp tonnage trip point is repeatable across thousands of cycles. The FPM seal tolerates mould-release-agent contamination and oil-aerosol exposure common in plastics processing environments.
Recomendado
Pump Discharge Pressure Supervision
The XMLP025BC11F suits pump discharge pressure supervision in booster sets and irrigation skids where 0 bar to 25 bar covers typical line pressures. Its 0.5 V to 4.5 V ratiometric signal travels well over shielded twisted-pair cable to a remote telemetry unit, where the 5 V reference voltage can be shared with other XMLP series sensors for simplified wiring. The 75 bar proof pressure tolerates pump-startup transients, and the ±0.1 % repeatability prevents nuisance dry-run trips that would otherwise stop the pump prematurely.
Recomendado
Mobile Equipment Hydraulic System Monitoring
In mobile hydraulic equipment such as telehandlers, agricultural tractors, and forestry machinery the XMLP025BC11F provides rugged pressure monitoring on implement lines operating up to 25 bar. The stainless-steel body, FPM seal, and wide -30 °C to +135 °C media temperature range handle outdoor temperature swings and oil-temperature rise, while the 5 VDC / 7 mA supply allows direct connection to battery-powered data loggers. The EN 175301-803-A connector supports easy replacement in field-service conditions where weatherproofing is critical.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para XMLP025BC11F — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | XMLP025BC71F | XMLP025BC11E | XMLP025BC11D | XMLP025BC11M12 | XMLP025BC11A |
|---|---|---|---|---|---|---|
| Package / Connector | EN 175301-803-A (DIN 43650) 3-pin | EN 175301-803-A (DIN 43650) 3-pin - same | M12 4-pin | Packard Metri-Pack | M12 4-pin | EN 175301-803-A (DIN 43650) 3-pin - same |
| Brand | Schneider Electric | Schneider Electric | Schneider Electric | Schneider Electric | Schneider Electric | Schneider Electric |
| Pressure Range | 0 bar to 25 bar | 0 bar to 25 bar | 0 bar to 25 bar | 0 bar to 25 bar | 0 bar to 25 bar | 0 bar to 25 bar |
| Output Signal | 0.5 V to 4.5 V ratiometric | 0.5 V to 4.5 V ratiometric | 0.5 V to 4.5 V ratiometric | 0.5 V to 4.5 V ratiometric | 0.5 V to 4.5 V ratiometric | 4 mA to 20 mA current loop |
| Supply Voltage | 5 VDC, 7 mA | 5 VDC, 7 mA | 5 VDC, 7 mA | 5 VDC, 7 mA | 5 VDC, 7 mA | 24 VDC loop-powered |
| Process Connection | G1/4 A male DIN 3852-E | G1/4 A male DIN 3852-E | G1/4 A male DIN 3852-E | G1/4 A male DIN 3852-E | G1/4 A male DIN 3852-E | G1/4 A male DIN 3852-E |
| Seal Material | FPM (Viton) | FPM (Viton) | FPM (Viton) | FPM (Viton) | FPM (Viton) | FPM (Viton) |
| Lifecycle Status | End-of-life (May 31, 2023) | Active | Last-time-buy | Last-time-buy | Last-time-buy | Last-time-buy |
| Approx. Unit Price @ qty 1 (USD) | $134.40 | $125.00 (est.) | $135.00 (est.) | $135.00 (est.) | $140.00 (est.) | $160.00 (est.) |
Principais diferenciais
- Active production alternative within XMLP family (vs XMLP025BC71F)
- Higher loop immunity with current output (vs XMLP025BC11A)
- Standard DIN 43650 connector vs M12 modern connector (vs XMLP025BC11E / XMLP025BC11M12)
Notas de projeto
The 0.5 V to 4.5 V output is ratiometric to the 5 V supply, NOT absolute. Do not power the sensor from a poorly regulated 5 V rail; the 0.1 %/V ratiometric accuracy is lost if the supply drifts. Use a 5 V LDO or DC-DC converter with ±1 % regulation. The XMLP025BC11F also requires SELV supply per IEC 61140, so never connect it directly to mains-derived AC-DC without an isolating transformer.
Estimated: at 25 °C ambient with hydraulic oil at 100 °C flowing through the G1/4 fitting, the sensor body reaches roughly 60-70 °C steady state due to conduction through the male thread. The -30 °C to +135 °C media temperature rating permits this. However, above 100 °C oil the FPM seal begins to age rapidly, so for continuous high-temperature duty verify the seal material compatibility with the datasheet chemical-resistance table.
Although the XMLP025BC11F is a wired sensor (not PCB-mounted), the host PCB should include ESD protection on the analogue input pin (e.g. 5 V TVS diode to GND) and a low-pass RC filter (10 kΩ + 100 nF) to reject high-frequency EMI from VFDs and motor inverters. Route the sensor cable away from switching power cables by at least 100 mm to minimise capacitive coupling.
The G1/4 A male process connection per DIN 3852-E requires a chamfer and O-ring counter-bore in the mating port. Use PTFE tape plus a fibre gasket; do not use liquid thread sealant on the male thread because it can migrate into the sensing cavity. Recommended torque is 25-30 N·m for G1/4 in stainless steel; over-torque will deform the FPM seal and cause leakage.
The 7 mA nominal current is small enough that multiple XMLP sensors can share a single 5 VDC 1 A supply. Plan 10 mA per sensor including margin for inrush. The EN 175301-803-A connector pin assignment is pin 1 = +V (5 V), pin 2 = Vout (0.5-4.5 V signal), pin 3 = GND, and the shield/drain wire (if used) terminates at the connector body or the pin-3 GND.
Informações de conformidade
RoHS, REACH, CE, UL, and CCC compliant per Schneider Electric product documentation. AEC-Q100 not applicable as this is an industrial pressure transmitter, not an automotive-grade semiconductor. End-of-commercialization May 31, 2023.
