Платы и модули
Подкатегории
Товары (185)
3000 - Adafruit Circuit Playground Developer Board | Adafruit
The Adafruit 3000, marketed as the Circuit Playground, is a round, all-in-one development board designed for beginners and educators. It integrates an ATmega32u4 microcontroller with built-in sensors, LEDs, and input devices on a single PCB, eliminating the need for external breadboard wiring for most introductory applications. The board is listed by Mouser under manufacturer name 'Adafruit'. A development board is a printed-circuit assembly built around a microcontroller or microprocessor and equipped with onboard peripherals (sensors, LEDs, push-buttons, USB interface, power regulation) so that firmware can be prototyped without designing separate carrier hardware. Development boards sit in the prototyping tier of the embedded hierarchy: bare MCU -> breakout board -> development board -> finished product. The Circuit Playground targets the education and maker segment of that hierarchy. Key features identified from the distributor listing include onboard NeoPixel LEDs, a built-in accelerometer, a temperature sensor, a light sensor, a microphone, two push-buttons, and a slide switch. Power can be supplied via USB, AAA batteries, or the JST battery connector. The board exposes all I/O as both alligator-clip-friendly pads and a standard header footprint, supporting both breadboard and clip-on prototyping styles. The architecture centers on the ATmega32u4 8-bit AVR core running at 8 MHz, which provides native USB support and removes the need for a separate USB-to-serial converter. The 32u4 keyboard appears at the top of the AVR family in terms of integrated connectivity and is commonly used in HID-class USB devices such as keyboards, mice, and game controllers. Typical applications include classroom STEM education, wearable prototyping, IoT sensor nodes, and rapid proof-of-concept builds where a fully assembled, battery-powered platform accelerates iteration. The board is supported by the Arduino IDE and the CircuitPython interpreter. When designing with this board, note that the ATmega32u4 has limited program memory (32 KB) and RAM (2.5 KB); projects requiring heavy networking or large display buffers should consider an ARM Cortex-M based board instead. The onboard sensors are sufficient for learning but are not precision-grade for production designs.
88MW320-R0 - MW320 Wi-Fi MCU Dev Board AWS IoT Kit | Marvell
The Marvell (NXP) 88MW320-R0, sold as the RD-88MW320-R0 88MW32X AWS IoT Starter Kit, is a wireless development board built around the 88MW320 highly integrated, low-power WLAN Microcontroller System-on-Chip (SoC) that combines an Arm Cortex-M4F MCU core with full 802.11 b/g/n Wi-Fi connectivity. The 88MW320-R0 reference designation identifies the R0 revision of the MW320 platform used across Marvell and NXP distribution channels. A wireless MCU development board is a hardware evaluation platform that exposes a Wi-Fi System-on-Chip's pins, power rails, antennas, and debug interfaces so firmware engineers can prototype connected products before committing to custom PCB designs. In the embedded hierarchy, the platform sits at: 88MW320 SoC -> wireless microcontroller -> system-on-chip -> embedded processor -> semiconductor device. Development boards such as this one are the standard first step in Internet of Things (IoT) product development. Key features include the Arm Cortex-M4F processor core with floating-point unit for computationally efficient embedded control, integrated 802.11 b/g/n Wi-Fi radio and network stack that removes the need for a separate connectivity module, and pre-certified AWS IoT cloud integration that shortens time-to-cloud for connected devices. According to the NXP 88MW320-88W322 datasheet, the SoC targets a broad array of smart devices for home, enterprise and industrial automation, smart accessories, and smart energy applications. The MW320 architecture integrates the MCU memory subsystem, Wi-Fi MAC/baseband/RF, and power management on a single die, reducing bill-of-materials count and board area versus discrete MCU-plus-module solutions. Low-power design techniques make it suitable for battery-conscious smart accessories. The SEGGER embedded toolchain supports the 88MW320 (MW300 family) for flashing and debugging, giving engineers production-grade tooling from day one. Typical applications include smart-home connected devices, enterprise and industrial automation nodes, smart energy endpoints, and cloud-connected smart accessories that leverage the AWS IoT Starter Kit software stack out of the box. Design consideration: since the 88MW320-R0 is a development board, final production designs migrate to the 88MW320-A0-NAPE SoC; verify pin mapping and RF layout against the NXP 88MW320-88W322 datasheet during the transition. This page synthesizes distributor pricing channels (Mouser, DigiKey, Octopart, TrustedParts), family drop-in board alternatives, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single decision-ready reference for the 88MW320-R0 platform.
900-13767-0000-0A0 - Jetson Orin NX 16GB SOM, US Origin | NVIDIA
The NVIDIA 900-13767-0000-0A0 is a country-of-origin-specific variant of the Jetson Orin NX 16GB System-on-Module (SOM), built around a 1024-core NVIDIA Ampere GPU with Tensor Cores, an 8-core ARM Cortex-A78AE 64-bit CPU, and 16 GB of LPDDR5 memory, delivering up to 100 TOPS of AI performance in a compact SOM form factor. This particular SKU is the US-origin / TAA-compliant variant of the standard 900-13767-0000-000, identical in electrical and mechanical specifications but specified by NVIDIA for government, defense, and TAA-restricted deployments. An NVIDIA Jetson Orin module is a compact, high-performance embedded AI computing platform (system-on-module) that integrates CPU, GPU, memory, power management, and I/O onto a single board designed to plug into a carrier board. Jetson Orin NX belongs to the Jetson Orin family of edge AI modules, which in NVIDIA's product taxonomy sits within the Jetson embedded computing platform, a subfamily of NVIDIA's broader edge AI and robotics portfolio. The Jetson Orin NX delivers Ampere-generation AI inference at a fraction of the power and footprint of a discrete GPU workstation, enabling advanced computer vision, generative AI, and multi-sensor fusion workloads at the edge. Key features of the 900-13767-0000-0A0 include 100 TOPS of INT8 AI performance (sparse), up to 50 TOPS dense INT8, 1024 CUDA cores plus 32 Tensor cores in the Ampere GPU, an 8-core Arm v8.2 64-bit CPU complex with 2MB L2 + 4MB L3 cache, 16 GB 128-bit LPDDR5 memory at 102.4 GB/s, configurable TDP between 10W and 25W, dual MIPI CSI-2 camera interfaces, PCIe Gen 4 lanes, USB 3.2, and the standard 260-pin Jetson SO-DIMM connector for carrier-board mating. The module supports NVIDIA JetPack SDK, CUDA, TensorRT, and Isaac robotics frameworks out of the box. Typical applications for the 900-13767-0000-0A0 include US-government edge AI deployments, defense and aerospace vision systems, TAA-restricted industrial automation, multi-camera video analytics at the edge, autonomous mobile robots, drone-based inference payloads, and medical imaging devices where country-of-origin compliance is mandated by procurement rules. When designing in this part, verify the carrier board supports the Jetson Orin NX pinout (P3767 reference design) and that the cooling solution can dissipate the configurable 10-25W envelope at the target workload. The 0A0 suffix has no electrical difference from the 0A1 and 000 variants; the difference is solely country of origin and TAA/NDAA compliance documentation.
900-13767-0000-0A1 - Jetson Orin NX 16GB TAA Module | NVIDIA
The NVIDIA 900-13767-0000-0A1 is a Jetson Orin NX 16GB System-on-Module (SOM) configured for Trade Agreement Act (TAA) compliance with US Country of Origin, delivering up to 100 TOPS of AI performance. The module integrates a 1024-core NVIDIA Ampere GPU with Tensor Cores, an 8-core Arm Cortex-A78AE 64-bit CPU, and 16 GB of LPDDR5 memory in a compact 70 mm x 45 mm form factor that fits inside a credit-card footprint. A System-on-Module (SOM) is a complete embedded computing subsystem that integrates a CPU, GPU, memory, power management, and connectivity onto a single board that plugs into a carrier board. SOMs belong to the embedded computing taxonomy (SoM -> embedded module -> SBC -> edge computing node) and accelerate time-to-market by abstracting high-speed memory routing, PMIC design, and thermal engineering from the customer's product team. Key features include 100 TOPS of INT8 AI inference, 2x NVIDIA NVDEC for hardware video decode, 1.4x NVENC for hardware video encode, dual MIPI CSI-2 camera interfaces, PCIe Gen 4.0 lanes, and support for the JetPack SDK with CUDA, TensorRT, and DeepStream SDKs. The module draws 10 W to 25 W configurable power, making it suitable for fan-cooled edge AI deployments where thermal envelope is constrained. The Jetson Orin NX 16GB uses the NVIDIA Ampere architecture with Multi-Instance GPU (MIG) style partitioning and dedicated Tensor Cores for INT8 and FP16 inference, providing server-class AI throughput at edge power budgets. The 16 GB LPDDR5 memory delivers 102 GB/s bandwidth, sufficient to host multi-camera perception pipelines, transformer-based vision models, and generative AI workloads concurrently. Typical applications include autonomous mobile robots (AMR), industrial machine vision, smart city traffic analytics, AI-powered video conferencing systems, and drone-based aerial inspection. The TAA/NDAA-compliant US country-of-origin designation makes this SKU particularly suited for US federal, defense, and government-procurement applications where non-TAA equivalents are ineligible. When designing with this module, plan thermal dissipation around the configurable 10 W to 25 W TDP window and ensure the carrier board supplies the full PCIe Gen 4.0 reference-clock jitter budget. The 0A1 suffix denotes US COO; design teams should verify compliance requirements before substituting the 0A0 (Taiwan) or 000 (China) suffixes. This page synthesizes distributor pricing, drop-in alternative module variants, and practical carrier-board design considerations not consolidated in the NVIDIA Jetson Orin NX datasheet.
AS7030B-EVALKIT - PPG/ECG Biometric Sensor Eval Kit | ams OSRAM
The ams OSRAM AS7030B-EVALKIT is a biometric sensor evaluation kit for the AS7030B vital-sign sensor, enabling full evaluation of embedded ECG and photoplethysmography (PPG) functions through a USB-connected Windows PC platform. A biometric sensor evaluation kit is a complete hardware and software development platform that lets engineers characterize a sensor before committing it to a wearable or medical product design. In the sensor development hierarchy, it sits above the bare sensor IC and below end-product integration: sensor IC -> sensor module -> evaluation board -> development kit -> production design. The AS7030B-EVALKIT family includes USB and Bluetooth variants that isolate the wearer from mains power via an IEC 60601-1 compliant RECOM DC/DC converter (R0.25S-0505/H or R0.25S-0505/HP) and signal isolators. Key capabilities include simultaneous ECG and PPG acquisition, an integrated low-noise analog front end, a synchronous demodulator, and on-board temperature sensor and accelerometer on a detachable break-out board connected via FPC cable. According to the AS7030B datasheet, the sensor includes an I2C slave at 7-bit address 0x30 (60h write / 61h read) and an interrupt output pin INT for host signaling. Architecturally, the kit splits functions between a motherboard (USB or Bluetooth host interface, isolation, power) and a biosensor break-out board carrying the AS7030B, electrodes, and auxiliary sensors. The AS7030B itself combines optical PPG channels with an ECG channel and galvanic skin response sensing in one device, targeting low-power, small-footprint fitness bands, smart watches, sports watches, and smart patches requiring multi-day battery life. Typical applications include heart-rate and HRV algorithm prototyping, ECG signal-chain validation, GSR (galvanic skin response) stress monitoring studies, and early firmware development for medical and consumer wearables. A key design consideration: always power the kit through the supplied isolation stage when attaching electrodes to a human subject, since the on-board IEC 60601-1 compliant RECOM converter exists specifically to prevent direct galvanic connection to the power grid. This page synthesizes distributor availability data, the official ams OSRAM user guide, and drop-in kit-variant comparisons not consolidated in the manufacturer datasheet.
ATMEGA1284P-XPLD - AVR ATmega1284P Xplained Eval Kit | Microchip
The Microchip Technology ATMEGA1284P-XPLD (MEGA-1284P Xplained) is an 8-bit AVR ATmega1284P microcontroller evaluation board featuring 128 KB ISP Flash with read-while-write capability, 4 KB EEPROM, 16 KB SRAM, and 32 general purpose I/O lines. It ships with the picoPower-technology ATmega1284P MCU, delivering up to 20 MIPS throughput from the advanced RISC core, and is designed for immediate out-of-the-box evaluation. An evaluation board is a printed circuit assembly that exposes a microcontroller's peripherals, power options, and programming interfaces so firmware engineers can prototype applications without designing custom hardware. Within the development-tools hierarchy, it belongs to the category: development board -> evaluation kit -> microcontroller development tools -> semiconductor development ecosystem. Key features of the kit include the high-performance, low-power AVR 8-bit RISC core executing 131 powerful instructions with mostly single-clock cycle execution, x8 general purpose working registers, and fully static operation to 20 MIPS. The target MCU integrates a real-time counter (RTC), three flexible timer/counters with compare modes and PWM, two USARTs, and a byte-oriented 2-wire serial interface (TWI). The board showcases picoPower technology, which enables aggressive low-power design experimentation, and supports In-System Programming (ISP) so firmware can be re-flashed in-circuit. The 16 KB SRAM - notably larger than the 2 KB of an ATmega328P - makes the kit well suited for memory-hungry prototypes such as FAT filesystems, larger buffers, and light protocol stacks. Typical applications include embedded prototyping, industrial sensor-node firmware development, educational AVR training, and pre-migration validation before committing to the ATmega1284P in a custom PCB. Design consideration: the kit's default fuse configuration on standalone ATmega1284P targets commonly uses the internal 8 MHz RC oscillator divided to 1 MHz (CKDIV8 set), so verify clock fuses and supply configuration when benchmarking power or performance on the Xplained hardware. This page synthesizes distributor availability, Xplained kit comparison data, and practical selection notes not found in the manufacturer datasheet, giving engineers a single citable reference for procurement and evaluation decisions.
ATMEGA168-XMINI - ATmega168 Xplained Mini Eval Kit | Microchip
The Microchip Technology ATMEGA168-XMINI is an ATmega168 Xplained Mini evaluation kit featuring an 8-bit AVR RISC microcontroller running at up to 16 MHz CPU clock, mounted on a compact development board for rapid prototyping and evaluation. An evaluation kit is a pre-assembled hardware platform that lets engineers test a microcontroller's peripherals, power modes, and software before committing to a custom PCB. Within the embedded development hierarchy, evaluation kits sit above bare ICs and below full reference designs: board > development kit > embedded system development tools. The Xplained Mini family is Microchip's entry-level evaluation platform for AVR MCUs, integrating an on-board debugger (mEDBG), a USB interface, and prototyping headers. Key features of the ATMEGA168-XMINI include the ATmega168 target MCU with 16 KB ISP flash memory, 512 B EEPROM, and 1 KB SRAM; an embedded debugger for programming and debugging via Atmel Studio / Microchip Studio; and Arduino-compatible header spacing that allows shields to be used for quick hardware expansion. The 16 MHz CPU rating matches the maximum grade of the ATmega168 device family. Technically, the board exposes the ATmega168's peripherals, including a 10-bit ADC, USART, SPI, I2C (TWI), and multiple timers, so firmware can be validated end to end. The on-board mEDBG debugger supports programming over ISP and debugWIRE-style workflows, eliminating the need for external programmer hardware in most bench setups. Typical applications include academic embedded-systems training, feasibility evaluation of ATmega168-based product designs, and small sensor or actuator prototypes built with Arduino-form-factor shields. The kit is also used for firmware regression testing during ATmega168 production support. A key design consideration: this kit has been declared obsolete by Microchip and is no longer manufactured, so new designs should target the ATmega328P Xplained Mini (ATMEGA328P-XMINI) or migrate to current AVR devices such as the ATmega168PB. Remaining units are available only through excess inventory and broker channels. This page synthesizes distributor availability data, drop-in board-family alternatives, and practical design notes not found in the manufacturer product page, with pricing and stock verified as of 2026-09-16.
ATMEGA168PB-XMINI - ATmega168PB Xplained Mini Eval Kit | Microchip
The Microchip Technology ATMEGA168PB-XMINI is the ATmega168PB Xplained Mini evaluation kit, an 8-bit AVR RISC development board for the picoPower ATmega168PB microcontroller featuring 16 KB ISP Flash, 512 B EEPROM, 1 KB SRAM, and 27 general purpose I/O lines, with an onboard mEDBG debugger operating from 8 MHz or 16 MHz CPU clock. A microcontroller evaluation kit is a printed-circuit-board platform that exposes a target MCU along with debugging hardware, connectors, and example circuits so embedded engineers can evaluate, program, and debug firmware before committing to custom PCBs. Within the product hierarchy, this board sits at the development-tools level above the bare ATmega168PB MCU, and below complete system solutions. Key features include a fully-integrated onboard debugger (mEDBG) that provides seamless integration with Atmel Studio and MPLAB X IDE, an Arduino-compatible pin header layout supported by community hardware packages such as XMiniCore and MiniCore, USB-powered operation, and direct access to all 27 GPIO lines of the target device. The picoPower technology of the ATmega168PB supports low-power design exploration. The ATmega168PB target combines the AVR 8-bit RISC core with 32 general-purpose working registers, read-while-write Flash for in-system programming, and a rich peripheral set including timers, USART, SPI, I2C (TWI), and a 10-bit ADC. The PB revision adds enhanced pin compatibility within the megaAVR family and improved peripheral configuration versus the ATmega168PA. Typical applications include evaluating the ATmega168PB for industrial control nodes, consumer appliance controllers, and hobby or education platforms that leverage the Arduino-compatible ecosystem, as well as quick prototyping of sensor interfaces and low-power designs. A key design consideration: the Xplained Mini board is a development platform and is not intended for production end products; production designs must migrate to the bare ATMEGA168PB in TQFP-32 (ATMEGA168PB-AUR) or VQFN-32 (ATMEGA168PB-MU) packages. This page synthesizes distributor availability, drop-in family alternatives, and practical design notes not found in the manufacturer product page.
ATMEGA256RFR2-XPRO - 2.4GHz 802.15.4 Zigbee Eval Kit | Microchip
The Microchip Technology ATMEGA256RFR2-XPRO is an Xplained Pro evaluation board for the ATmega256RFR2, an IEEE 802.15.4 compliant single-chip device that combines an 8-bit AVR RISC microcontroller with a 2.4 GHz RF transceiver, offering a 103.5 dB link budget and on-board 16 MHz CPU clock with a 32.768 kHz crystal for sleep timers, all on an Xplained Pro form-factor PCB. An evaluation board is a hardware platform that lets engineers assess a semiconductor device before committing it to a custom PCB design. Within the development-tools hierarchy, this kit belongs to the wireless development board family under boards and modules, sitting above the bare ATmega256RFR2 MCU and below complete starter kits such as the ATMEGA256RFR2-XSTK. Key features include the ATmega256RFR2 MCU with 256 KB flash, integrated 2.4 GHz transceiver for Zigbee and IEEE 802.15.4 networks, two on-board crystals (16 MHz and 32.768 kHz) with cut-straps for oscillator allowance measurement, and full compatibility with the Xplained Pro extension-board ecosystem, including I/O1, OLED1, and PROTO1 boards. The ATmega256RFR2 is a low-power CMOS 8-bit MCU based on the AVR enhanced RISC architecture, executing most instructions in a single clock cycle. Microchip claims industry-leading RF performance for single-chip devices, with the 103.5 dB link budget achieved while consuming roughly 50% less energy than competing solutions, which matters directly for battery-powered mesh nodes. Typical applications include evaluation and prototyping of Zigbee and IEEE 802.15.4 mesh networks, smart-home and IoT sensor nodes, low-power wireless telemetry, and RF protocol development supported by Atmel Studio (Microchip Studio) and the on-board embedded debugger. Design consideration: the XPRO kit does not include extension boards; order the ATMEGA256RFR2-XSTK starter kit if you need OLED1, I/O1, and PROTO1 boards for a ready-to-go package. This page synthesizes distributor availability, kit alternatives, and practical design notes not found in the manufacturer datasheet. Pricing as of 2026-09-17.
ATMEGA256RFR2-XSTK - 802.15.4 Zigbee Xplained Pro Kit | Microchip
The Microchip Technology ATMEGA256RFR2-XSTK is an Xplained Pro starter kit for evaluating and prototyping the ATmega256RFR2, an IEEE 802.15.4 compliant single-chip that combines an AVR 8-bit microcontroller running at 16 MHz with a best-in-class 2.4 GHz RF transceiver delivering a link budget of 103.5 dB. A wireless microcontroller starter kit is a hardware evaluation platform that combines a target microcontroller board, an on-board debugger, and example firmware so engineers can assess a device before committing to custom PCB design. In the embedded development hierarchy, it sits within the evaluation and development boards category, under wireless development kits, serving as the fastest path from datasheet to working RF link. Key features include the ATmega256RFR2 device with 256 KB of flash, an integrated 2.4 GHz transceiver compliant with IEEE 802.15.4 and suitable for Zigbee and other 802.15.4 stacks, a 32.768 kHz crystal for real-time clock applications, and Xplained Pro ecosystem compatibility. According to Microchip, the ATmega256RFR2 offers the industry's highest RF performance for single-chip devices while consuming 50% less power in relevant operating modes, which directly benefits battery-powered mesh networks. Technically, the kit demonstrates the single-chip integration advantage: instead of pairing a separate MCU with a discrete radio module over SPI, the ATmega256RFR2 executes both application code and MAC/PHY layers on one die, reducing BOM cost, board area, and inter-chip latency. The kit exposes the device through Xplained Pro extension headers, allowing sensor and display boards to be attached without custom hardware. Typical applications include 802.15.4 / Zigbee node prototyping, wireless sensor network development, smart-energy and home-automation evaluation, and RF performance benchmarking of the 2.4 GHz transceiver against competing solutions. A key design consideration when moving from this kit to production is RF layout: the ATmega256RFR2 requires careful antenna matching and ground-plane design, so use the kit's reference layout as a starting point and verify antenna performance with VNA measurements before finalizing the PCB. This page synthesizes distributor pricing, evaluation-kit alternatives, and practical design notes not found in the manufacturer's product page.
ATMEGA324PB-XPRO - ATmega324PB Xplained Pro Eval Kit | Microchip
The Microchip Technology ATMEGA324PB-XPRO is an Xplained Pro evaluation platform for the ATmega324PB, an 8-bit AVR enhanced RISC microcontroller running at up to 20 MHz with 32 KB flash, 2 KB SRAM, and 1 KB EEPROM, mounted on a USB-powered evaluation board in the Xplained Pro form factor. An MCU evaluation board is a hardware development platform that exposes a microcontroller's peripherals, GPIO, and debug interfaces so engineers can prototype firmware and validate system behavior before committing to custom PCB design. Evaluation boards sit within the broader development-tool hierarchy: microcontroller -> evaluation kit -> embedded development ecosystem, and the Xplained Pro family integrates natively with Atmel Studio (Microchip Studio) for one-click programming and debugging. Key features of the ATMEGA324PB-XPRO include an embedded debugger (EDBG) with CMSIS-DAP support for programming, debugging, and virtual COM port operation; three Xplained Pro extension headers (XPRO connectors) supporting more than 20 extension boards covering wired and wireless connectivity, crypto authentication, and QTouch capacitive touch; and onboard sensors and user interfaces for immediate out-of-the-box evaluation. The target ATmega324PB device is Functional Safety (FuSa) ready and features the QTouch Peripheral Touch Controller (PTC). The ATmega324PB itself is a low-power CMOS 8-bit AVR microcontroller executing powerful instructions in a single clock cycle, delivering throughput up to 20 MIPS at 20 MHz. Its PTC supports 32 buttons in self-capacitance mode or up to 256 buttons in mutual-capacitance mode, and is supported by the QTouch Composer development tool including the QTouch Library project builder and QTouch Analyzer for faster, simpler capacitive touch implementations. Typical applications for the kit include capacitive touch HMI prototyping, low-power embedded system evaluation, peripheral driver development for the five timers and multiple USART/SPI/I2C interfaces of the ATmega324PB, and education in AVR RISC architecture. A key design consideration: the kit does not include extension boards, which must be purchased individually - plan your bill of materials accordingly, and verify extension board compatibility via the Xplained Pro header specification. This page synthesizes distributor pricing, platform alternatives, and practical design notes not found in the manufacturer product page.
ATMEGA328P-XMINI - ATmega328P Xplained Mini Eval Kit | Microchip
The Microchip Technology ATMEGA328P-XMINI is the ATmega328P Xplained Mini evaluation kit, a hardware development platform for evaluating the 8-bit AVR ATmega328P microcontroller, featuring a fully integrated on-board debugger (EDBG) with seamless Atmel Studio (Microchip Studio) integration. An MCU evaluation board is a printed-circuit assembly that mounts a target microcontroller together with debug circuitry, USB connectivity, power regulation, and user I/O so that embedded engineers can prototype firmware before committing to custom hardware. Evaluation kits sit at the top of the development hierarchy: semiconductor -> microcontroller -> evaluation board -> development ecosystem, bridging the gap between datasheet study and production PCB design. Key features include the fully integrated debugger that provides seamless integration with Atmel Studio, direct USB connectivity for programming and debugging without external tools, and access to all ATmega328P peripherals such as UART, SPI, I2C, ADC, timers, and PWM channels for hands-on evaluation. The ATmega328P target is an 8-bit AVR RISC microcontroller widely used in industrial control, consumer products, and the Arduino Uno ecosystem, giving this kit immediate relevance to the largest hobbyist and professional AVR user base. The on-board debugger also supports programming of external target boards through standard AVR interfaces. Typical applications include firmware prototyping for ATmega328P-based products, education and university embedded-systems labs, Arduino-compatible design evaluation, and proof-of-concept sensor or actuator control systems. When designing with this kit, remember that evaluation boards are not production hardware; verify power budget and EMC behavior on a custom PCB before release. This page synthesizes distributor availability from DigiKey, Mouser, and Octopart, drop-in kit alternatives, and practical design notes not found in the manufacturer product page.
ATMEGA328PB-XMINI - Xplained Mini Eval Kit | Microchip
The Microchip ATMEGA328PB-XMINI is the ATmega328PB Xplained Mini evaluation kit, a hardware platform for evaluating the picoPower ATmega328PB 8-bit AVR RISC microcontroller, which executes powerful instructions in a single clock cycle to achieve throughputs close to 1 MIPS per MHz and runs at 8 MHz or 16 MHz on this board. An evaluation board (also called an evaluation kit or dev board) is a printed-circuit platform that mounts a target microcontroller together with support circuitry - regulator, debug interface, headers and LEDs - so engineers can assess the MCU's peripherals and performance before committing to a custom PCB. Evaluation kits sit at the top of the development-tool hierarchy: chip -> evaluation board -> reference design -> end product. Key features include a fully integrated on-board debugger (EDBG-class) providing seamless integration with Atmel Studio / Microchip Studio, USB-powered operation, access to all ATmega328PB features, and the ATmega328PB itself with picoPower low-power technology, AVR enhanced RISC core, and multiple USART, SPI and I2C/TWI interfaces including the PB-family's doubled communication peripherals versus the ATmega328P. The kit exposes the MCU through standard headers so external circuitry can be attached, and the integrated debugger also programs external targets, making it useful both as an evaluation platform and as a low-cost programmer for the ATmega328PB in custom designs. Per the Microchip product page, the kit enables easy integration of the device into a custom design. Typical applications include evaluating ATmega328PB for Arduino-compatible designs, industrial sensor nodes, low-power battery products, and teaching embedded AVR programming. Design consideration: use an external supply and measure current with an ammeter header when characterizing picoPower sleep currents. This page synthesizes distributor pricing, kit-family alternatives, and practical evaluation tips not found in the manufacturer datasheet. Prices as of 2026-09-17.
ATMEGA4809-XPRO - ATmega4809 Xplained Pro Eval Board | Microchip
The Microchip Technology ATMEGA4809-XPRO is an Xplained Pro evaluation board for the ATmega4809 8-bit AVR microcontroller, featuring a 20 MHz AVR core with hardware multiplier, 48 KB Flash, 6 KB SRAM and 256 bytes of EEPROM in a 48-pin package. An Xplained Pro evaluation kit is a development board platform from Microchip Technology designed to give embedded engineers immediate access to a target microcontroller's full peripheral set through onboard debugging, USB connectivity and standardized extension headers. Within the development-tool hierarchy (microcontroller -> evaluation board -> embedded system development kit), the Xplained Pro family sits above the Curiosity Nano line by offering larger expansion capability via the Xplained Pro extension connector standard. Key features of this kit include the Functional Safety (FuSa) capable AVR MCU 8-bit device ATmega4809 as its target, onboard Embedded Debugger for programming and debugging without external tools, and support for additional peripherals through Xplained Pro extension kits and MIKROE mikroBUS-compatible Click boards. The ATmega4809 device on board runs at up to 20 MHz and uses Microchip's Core Independent Peripherals (CIP), which offload tasks such as timing, communication and event routing from the CPU, enabling deterministic operation with lower software overhead. The kit serves as the recommended evaluation platform for the ATmega4809, ATmega4808, ATmega3209 and ATmega3208 microcontrollers, all sharing the megaAVR 0-series architecture documented in the ATmega4808/4809 data sheet (DS40002173B). Typical applications include evaluating Core Independent Peripheral designs, prototyping sensor and actuator nodes, teaching 8-bit AVR architecture, and bringing up firmware for products based on the megaAVR 0-series before committing to custom PCB hardware. A key design consideration: code developed on this kit ports directly to ATmega4808/4809/3208/3209 target hardware, but note the 40-pin ATmega4809 uses the 48-pin die with fewer connected pads, so pins PB[5:0] and PC[7:6] require special handling on smaller packages. This page synthesizes distributor availability, kit-family alternatives, and practical evaluation guidance not found on the manufacturer product page alone.
ATMEGA64HVE2-EK1 - ATmega64HVE2 IBS Evaluation Board | Microchip
The Microchip Technology ATMEGA64HVE2-EK1 is an evaluation board and reference design kit for the ATmega64HVE2, an 8-bit AVR microcontroller targeting IBS (Intelligent Battery Systems). This board, also listed by Microchip as an ATMega64HVE2 IBS Reference Design 1, provides a complete hardware platform for evaluating the ATmega64HVE MCU family and developing battery-management firmware. An evaluation board of this type is a printed circuit assembly that carries the target microcontroller together with the supporting power, programming, and peripheral circuitry needed to run and test firmware without custom PCB fabrication. In the product hierarchy it belongs to development boards and kits, a subcategory of design and prototyping hardware that bridges datasheets and final production designs. Developers use such boards to validate pin assignments, peripheral configurations, and power consumption before committing to a custom layout. Key features of this kit include the ATmega64HVE 8-bit AVR core, a reference-design hardware topology specifically arranged for Intelligent Battery System development, and compatibility with Microchip AVR development tools for flashing and debugging. The board is RoHS compliant, according to distributor listings for this part. Because the ATmega64HVE2 is aimed at battery system supervision, the reference design demonstrates how the MCU's analog and digital peripherals can be arranged for cell monitoring, measurement, and system communication tasks. Engineers can use the board to exercise the device's I/O, timers, and communication interfaces while measuring real-world behavior under representative conditions. Typical applications include evaluating battery management firmware, prototyping IBS node electronics, training and demonstration platforms, and early feasibility studies for battery-powered industrial and automotive subsystem designs. A key design consideration is that evaluation boards are single-unit development tools: pricing, packaging, and availability differ fundamentally from production silicon, and the board's layout should not be copied directly into a production design without review of its test-focused provisions. This page synthesizes distributor pricing context, availability signals, and practical design notes not found on any single distributor or manufacturer page, making it a consolidated reference for sourcing and evaluating the ATMEGA64HVE2-EK1.
ATNGW100 - AVR32 AP7000 Network Gateway Eval Board | Microchip
The Microchip Technology ATNGW100 is a network gateway evaluation board built around the AVR32 AT32AP7000 (also supporting AT32AP7001 and AT32AP7002) 32-bit AVR MCU/MPU, shipped as a complete kit containing the board plus a Linux development and debug toolchain. An embedded evaluation board is a printed circuit assembly that exposes the key peripherals of a target microcontroller or microprocessor so engineers can prototype firmware, drivers, and complete applications before committing to custom hardware. Evaluation boards sit at the top of the embedded development hierarchy: semiconductor -> MCU/MPU -> development kit -> application firmware. They typically integrate power regulation, clocking, debug connectors, memory, and network or USB interfaces. Key features of the ATNGW100 include the high-performance AVR32 AP7000 core, integrated build scripts for the toolchain, Linux kernel, boot loader, libraries, and applications, and a configuration system that is easily adaptable to custom boards. Because Linux and the complete toolchain are bundled, teams can move from unboxing to running an embedded Linux network gateway without lengthy host setup. Architecturally, the AP7000 family is a 32-bit AVR32 RISC processor designed by Atmel (now Microchip) for high-throughput embedded control and networking. The ATNGW100 board demonstrates this processor in a network gateway role, where its peripheral set and Linux support enable routing, bridging, and protocol-conversion workloads. The supplied build scripts produce reproducible, optimized system images that can be trimmed for production targets. Typical applications include embedded Linux gateway prototyping, AVR32 AP7000 firmware evaluation, industrial network bridge development, and academic embedded-systems teaching labs that need a complete Linux-capable platform. Design consideration: treat the ATNGW100 as a development platform, not a production module. When migrating to custom hardware, reuse the board files and build-script outputs, then verify boot-loader and kernel configuration against your own memory map and peripheral usage. This page synthesizes distributor availability, verified specification excerpts, and practical selection guidance for the ATNGW100 that is not consolidated on any single manufacturer or distributor page.
ATNGW100MKII - AVR32 AP7000 Network Gateway Eval Board | Microchip
The Microchip Technology ATNGW100MKII is a 32-bit embedded evaluation board for the AVR32 UC3 family, based on the AT32AP7000, AT32AP7001, or AT32AP7002 AVR32 MCU and designed as the second-generation Network Gateway (NGW) reference platform with Ethernet connectivity and JTAG debugging support. Note: the original Atmel datasheet set carries a Product End-of-Life (EOL) notification, and the platform status is obsolete, with remaining stock available from independent distributors. An embedded MCU evaluation board is a ready-to-use printed circuit assembly that hosts a target microcontroller plus the supporting power, clock, memory, debug, and communication circuitry needed to begin software development immediately. In the product hierarchy it sits under development tools -> evaluation boards and kits -> embedded MCU and DSP evaluation boards, bridging the gap between a bare microcontroller datasheet and a production-locked custom PCB. Key features of the ATNGW100MKII center on the AVR32 architecture, a 32-bit RISC core family originally developed by Atmel and inherited by Microchip Technology. The platform supports the AT32AP7000, AT32AP7001, and AT32AP7002 application processors, integrates Ethernet networking hardware, and provides a JTAG interface for on-chip debugging and flash programming, which makes it a natural fit for Linux-class gateway and industrial networking designs. Technically, the AP7000-series devices combine the AVR32 RISC core with on-chip peripherals suited to communication equipment, including Ethernet MAC, USB, and serial interfaces as implemented on the board. The NGW100 mkII iteration refined the original Network Gateway board layout, and the published Atmel document set includes a product overview datasheet plus the EOL notification that defines last-time-buy conditions for the platform. Typical applications include network gateway prototyping, embedded Linux porting and driver development, industrial automation nodes, and academic teaching of 32-bit RISC embedded systems. The onboard Ethernet and JTAG make the board usable out of the box for both application code and low-level bootloader work. A key design consideration is lifecycle planning: because the platform is formally EOL/obsolete, new designs should treat the ATNGW100MKII as a maintenance and prototyping tool rather than a long-term production reference, and should budget for last-time-buy stock. This page synthesizes distributor availability, datasheet links, lifecycle status, and drop-in-replacement guidance for the ATNGW100MKII not found on any single manufacturer or distributor page.
ATR0635-EK1 - ANTARIS4 GPS Eval Kit SuperSense | Microchip
The Microchip (Atmel) ATR0635-EK1 is an evaluation kit for the ANTARIS4 single-chip GPS receiver with SuperSense indoor and autonomous acquisition technology, delivering 2.5 m CEP accuracy, 34 s cold-start time to first fix, and -158 dBm tracking sensitivity. A single-chip GPS receiver integrates the complete RF front end, baseband correlators, and navigation processor into one die, sitting within the GNSS receiver hierarchy of RF ICs and location-based positioning ICs. Evaluation kits such as the ATR0635-EK1 provide the hardware platform for firmware development, prototyping, and engineering validation of the target receiver IC before volume design-in. Key features include an 8192 search-bin acquisition engine with GPS acquisition accelerator, SuperSense weak-signal tracking for indoor operation, and high isolation between GPS and cellular bands as noted by Atmel for mobile coexistence. The ANTARIS4 architecture yields acquisition sensitivity of -142 dBm at cold start with an external LNA, and tracking sensitivity of -158 dBm. The ANTARIS4 platform uses an active continuous acquisition approach that maintains full-sky search capability while tracking, reducing reacquisition time after signal blockage. The receiver supports stand-alone 2D positioning at 2.5 m CEP and outputs standard NMEA data over UART for host integration. Typical applications include portable navigation devices, mobile handsets (where the kit verifies GPS/cellular coexistence isolation), asset trackers, and automotive telematics prototypes. Design consideration: use the evaluation kit to measure actual TTFF and sensitivity on your specific antenna and PCB stack-up before committing to the ATR0635 for production, since kit results with an active antenna may exceed your final passive-antenna performance. This page synthesizes verified datasheet figures, distributor stock references, and family-level alternative guidance not consolidated in the manufacturer datasheet.
ATR0981-EK - 400-500MHz UHF SiGe Front-End Eval Board | Microchip
The Microchip Technology ATR0981-EK is an evaluation board (front-end kit) for the ATR0981 UHF SiGe front-end IC, covering the 400 MHz to 500 MHz frequency range and supplied with one populated demonstration board. An RF front-end evaluation kit is a hardware development tool that lets engineers exercise a radio-frequency integrated circuit outside of a custom PCB design. In the RF signal-chain hierarchy, the ATR0981 itself is a monolithic transmit/receive front-end built on Atmel's (now Microchip's) advanced silicon-germanium (SiGe) process, and the -EK suffix denotes the board-level companion product used to characterize, prototype, and validate designs around that IC before committing to production layouts. Key attributes of this kit include support for the 300 MHz to 500 MHz operating range of the ATR0981 die (with the board itself specified at 400 MHz to 500 MHz), the SiGe front-end technology that delivers low noise and good linearity for sub-GHz radios, and RoHS-compliant, lead-free construction. The kit exposes the transmit and receive front-end functions of the IC for measurement with standard RF test equipment such as spectrum analyzers and vector network analyzers. The ATR0981 is a monolithic IC manufactured using Atmel's advanced SiGe technology; it performs a transmit and receive front-end function dedicated to the 300 MHz to 500 MHz band. SiGe bipolar processes provide high transition frequency (fT) devices, which translate into useful gain and low noise figure at UHF frequencies where CMOS front-ends typically struggle. This makes the part attractive for battery-powered sub-GHz ISM-band radio designs such as meters, telemetry links, and remote-keyless-entry style systems. Typical applications include prototyping 400-500 MHz TX/RX front-ends for short-range industrial telemetry, RF link budget characterization for sub-GHz sensor nodes, and lab evaluation of SiGe front-end performance ahead of custom PCB integration. A key design consideration is that board-level RF performance (return loss, gain, noise figure) depends on the evaluation board layout; results are only transferable to a custom design if equivalent controlled-impedance RF layout practices are reproduced. This page synthesizes distributor listings, datasheet references, and practical engineering context not found on the manufacturer product page alone.
ATR2406-DEV-BOARD - 2.4GHz ISM RF Transceiver Eval Board | Microchip
The Microchip Technology ATR2406-DEV-BOARD is an RF evaluation and development board for the ATR2406 Smart RF single-chip 2.4GHz ISM band transceiver, featuring GFSK modulation at data rates up to 1152 kbits/s, typical receive sensitivity of -93 dBm thanks to an integrated LNA, and typical output power of +4 dBm. The board exposes the full capability of the ATR2406 transceiver IC, which is packaged in a 32-pin QFN and integrates an image-rejection mixer, low-IF filter, FM demodulator, RSSI, TX preamplifier, power-ramping generator for an external power amplifier, an integrated synthesizer, and a fully integrated VCO. An RF evaluation and development board is a printed circuit assembly that lets engineers evaluate, prototype, and validate a radio IC without designing a custom RF layout. Within the system hierarchy, it sits in the development tools layer above the semiconductor itself: transceiver IC -> Smart RF product family -> RF evaluation and development kits/boards -> development boards, kits and programmers. Such boards shortens time-to-market by providing proven RF matching networks, decoupling, and firmware hooks. Key features of the ATR2406-DEV-BOARD platform include a fully integrated low-IF receiver, a fully integrated GFSK modulator supporting data rates up to 1152 kbits/s, high sensitivity of typically -93 dBm due to the integrated low-noise amplifier, and multi-channel operation across 95 channels with frequency-hopping support. These characteristics suit short-range cable-replacement links in the globally available 2.4GHz ISM band. On the technical side, Atmel's (now Microchip's) reference design pairs the ATR2406 transceiver with the ATmega88 AVR microcontroller, implementing proprietary Smart RF firmware with adaptive frequency hopping for robust proprietary wireless links. The low-IF architecture reduces external component count because channel filtering and demodulation happen on-chip, while the RSSI output enables link-quality monitoring and channel scoring in the frequency-hopping protocol. Typical applications include wireless cable replacement, proprietary 2.4GHz sensor links, game controllers and human interface devices, and low-cost industrial telemetry where a certified proprietary stack is preferred over Bluetooth. The 95-channel plan and frequency-hopping firmware improve coexistence with Wi-Fi and other 2.4GHz traffic. Design consideration: since the ATR2406 relies on an external power amplifier option via its power-ramping generator, developers should budget antenna matching and PA biasing early; RF layout on the dev board is tuned, so copying its stackup is recommended. Note that the board and its target IC are legacy/obsolete devices, so new designs should verify lifecycle status. This page synthesizes distributor listings, the Atmel/Microchip datasheet, and the ATR2406/ATmega88 reference design documentation into a single resource with design notes and sourcing context not found on standard catalog pages.
ATR2406-DEV-BOARD2 - 2.4GHz Smart RF Eval Board | Microchip
The Microchip Technology ATR2406-DEV-BOARD2 is a 2.4 GHz ISM band Smart RF transceiver evaluation board built around the ATR2406 low-IF GFSK transceiver and the T7024 companion device, delivering typically -93 dBm receive sensitivity, typically +4 dBm output power, and data rates up to 1152 kbit/s across 95 channels. An RF evaluation board is a hardware development platform that lets engineers test and validate a wireless transceiver IC before committing to a custom PCB design. Within the product hierarchy, it sits under development boards, kits and programmers, then RF development tools, then wireless/ISM evaluation platforms. Evaluation boards typically expose the RF IC, its supporting passives, antenna matching network, and an on-board microcontroller so the entire physical layer can be exercised out of the box. Key features of this platform include a fully integrated low-IF receiver with integrated LNA, a fully integrated GFSK modulator supporting data rates up to 1152 kbit/s, and multi-channel operation across 95 channels in the 2.4 GHz ISM band. The high sensitivity of typically -93 dBm, achieved thanks to the integrated LNA, directly extends link budget, while the typically +4 dBm output power supports cable-replacement range targets. Technically, the board pairs the ATR2406 Smart RF transceiver with an ATmega88 AVR microcontroller, matching Microchip's ISM reference design (document doc4624), whose proprietary Smart RF firmware implements adaptive frequency hopping for robust cable-replacement links. This combination allows designers to evaluate both the analog RF performance and the full protocol stack in one setup. Typical applications include 2.4 GHz proprietary wireless links, cable replacement, wireless sensor and industrial control prototyping, and RF education platforms. Design consideration: evaluate link margin at your target data rate, since sensitivity degrades as data rate increases. This page synthesizes distributor pricing, availability, reference-design context, and practical evaluation guidance not found in the manufacturer datasheet alone. Pricing data referenced as of 2026-09-19.
ATR2406-DEV-KIT - 2.4GHz ISM GFSK Transceiver Eval Kit | Microchip
The Microchip Technology ATR2406-DEV-KIT is an RF evaluation and development kit for the ATR2406 low-IF 2.4 GHz ISM band transceiver, featuring fully integrated GFSK modulation supporting data rates up to 1152 kbits/s, typical receiver sensitivity of -93 dBm, and typical output power of +4 dBm. An RF transceiver evaluation kit is a complete hardware-and-firmware platform that lets engineers prototype, test, and validate wireless designs before committing to PCB production. In the wireless development hierarchy, a dev kit (board-level platform) sits above the bare IC and below end products, bundling evaluation boards, power supplies, firmware, and design files into a single package. Key features of the underlying ATR2406 include a fully integrated low-IF receiver, a fully integrated GFSK modulator, an integrated LNA delivering -93 dBm typical sensitivity, multi-channel operation across 95 channels, and a QFN32-packaged single-chip transceiver with image-rejection mixer, low-IF filter, FM demodulator, RSSI, TX preamplifier, power-ramping generator for an external power amplifier, integrated synthesizer, and fully integrated VCO and TX filter. The kit architecture pairs the ATR2406 transceiver with the ATmega88 flash microcontroller in a reference design documented in Microchip application note doc4624. According to Microchip, the related ATR2406-DEV-KIT2 ships with two ATR2406/ATmega88 boards, two battery packs, AAA batteries, and a CD-ROM containing firmware and manufacturing data including Gerber files, plus adaptive frequency-hopping firmware. The original ATR2406-DEV-KIT evaluation kit also includes a large LCD display and demonstration and testing firmware. Typical applications include 2.4 GHz ISM-band wireless links, wireless keyboard/mouse and consumer remote control links, industrial telemetry, and low-cost proprietary RF protocol prototyping. The 95-channel capability supports frequency-hopping implementations for coexistence in congested ISM spectrum. Design consideration: the ATR2406 TX preamplifier includes a power-ramping generator intended to drive an external power amplifier, so plan the output stage matching network and regulatory spurious-emission filtering around your regional 2.4 GHz ISM limit. This page synthesizes distributor availability, related-kit cross references, and practical design guidance not consolidated in the manufacturer datasheet.
ATR2406-DEV-KIT2 - 2.4GHz GFSK RF Eval Kit | Microchip
The Microchip Technology ATR2406-DEV-KIT2 is a complete evaluation and development kit for the ATR2406 Low-IF 2.4 GHz ISM band GFSK transceiver paired with the ATmega88 8-bit AVR microcontroller, providing an out-of-the-box platform for 2.4 GHz cable-replacement and short-range wireless prototyping. A development kit is a hardware platform that combines the target device (in this case a 2.4 GHz RF transceiver), a host controller, PCB antennas or RF matching networks, and programming interfaces into a single board, allowing engineers to evaluate RF link performance, develop firmware, and validate designs before committing to custom PCB layouts. Development kits sit at the top of the embedded design hierarchy: silicon -> evaluation module -> full development kit -> production design. Key features of the underlying ATR2406 transceiver include a fully integrated low-IF receiver with integrated LNA delivering typical sensitivity of -93 dBm, a fully integrated GFSK modulator supporting data rates up to 1152 kbit/s, and typical output power of +4 dBm. The transceiver supports multi-channel operation across 95 channels in the 2.4 GHz ISM band, giving flexibility for frequency-hopping or multi-network deployments. The reference design based on ATR2406 and ATmega88, documented in Microchip/Atmel application note doc4624, addresses cost-effective and flexible cable-replacement solutions and offers a complete solution enabling fast time-to-market cycles. Firmware development and debugging are performed through the ATmega88's standard AVR programming interfaces, letting teams port existing AVR codebases directly. Typical applications include 2.4 GHz wireless cable replacement, point-to-point and star-topology sensor links, consumer remote controls, and RF link characterization during design-in of the ATR2406 silicon. A key design consideration: RF performance figures such as the -93 dBm sensitivity are transceiver datasheet values; real-world range on the kit board depends on antenna matching and enclosure, so validate link budget with your own antennas. This page synthesizes distributor availability, datasheet feature data, and procurement guidance not consolidated on the manufacturer site. Pricing is quotation-based as of 2026-09-19.
ATR2434-DEV-BOARD - 2.4GHz ISM RF Eval Board | Microchip
The Microchip Technology ATR2434-DEV-BOARD is a Smart RF evaluation and development board for the ATR2434 2.4 GHz ISM-band radio transceiver, supplied as a complete kit with board, software, and documentation. An RF evaluation and development board is a hardware platform that lets engineers prototype, test, and validate wireless designs before committing to custom PCB layout. In the product hierarchy, it belongs to development tools supporting RF transceivers, which combine a radio front end, a modem, and a baseband in one device. Evaluation boards typically expose all key signals, antenna connectors, and configuration interfaces so the target IC can be exercised under real operating conditions. The underlying ATR2434 device contains a 2.4 GHz radio transceiver, a GFSK modem, and a dual DSSS reconfigurable baseband. Both radio and baseband are code- and frequency-agile: 49 Gold spreading codes are supported across 78 1-MHz channels, yielding a theoretical spectral capacity of 3822 channels and a communication range of up to 50 meters or more. A four-wire SPI interface connects the transceiver to an application MCU and supports single-byte and multi-byte serial transfers. Typical applications include ISM-band wireless sensor networks, proprietary 2.4 GHz data links, remote control and telemetry systems, and evaluation of DSSS/GFSK modulation schemes for short-range communication. When working with this board, note the compliance status: it is listed as containing lead and RoHS non-compliant, so it should be treated as an engineering evaluation tool rather than a production reference for RoHS-restricted products. This page consolidates distributor availability, verified datasheet references, and compliance data for the ATR2434-DEV-BOARD in one place, adding sourcing and compliance context not found in the manufacturer documentation alone.