Интегральные схемы

Подкатегории

📁 АЦП/ЦАП 2519 товаров 📁 Микросхемы усилителей 797 товаров 📁 Аудиокодеки 16 товаров 📁 Аудио ИС 2 товаров 📁 Тактирование и синхронизация 299 товаров 📁 DSP 963 товаров 📁 ИС сбора данных 2 товаров 📁 Цифровые потенциометры 4 товаров 📁 Драйверы и контроллеры дисплеев 1 товаров 📁 FPGA и CPLD 6666 товаров 📁 Интерфейсные ИС 1586 товаров 📁 Драйверы светодиодов 1 товаров 📁 Логические микросхемы 305 товаров 📁 Микросхемы памяти 875 товаров 📁 Микроконтроллеры 18730 товаров 📁 Микропроцессоры 4 товаров 📁 Драйверы двигателей 1 товаров 📁 Прочее 1 товаров 📁 Sensor and Detector Interfaces 1 товаров 📁 Специализированные ИС 15 товаров 📁 Видео ИС 13 товаров

Товары (32803)

STM32F765NIH6 - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics
STM32F765NIH6

STM32F765NIH6 - 216MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics

The STMicroelectronics STM32F765NIH6 is a 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, with 2 MB of flash memory, in a 216-TFBGA package measuring 13 x 13 mm. It belongs to the STM32F7 performance-oriented microcontroller family and combines a high-frequency CPU with extensive embedded memory and integrated peripherals. A microcontroller is a compact semiconductor system that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, communication interfaces, and interrupt controllers. The STM32F7 family hierarchy is Arm Cortex-M7 processor core, embedded microcontroller, STM32 microcontroller, and semiconductor. This device is intended for embedded control systems requiring substantially more processing capability than typical low-cost Cortex-M microcontrollers. Verified source data identifies a 32-bit architecture, up to 216 MHz operation, and 2 MB organized as 2M x 8 of flash. The family datasheet also states 462 DMIPS and up to 2 MB of flash. Its high-performance positioning makes it relevant for industrial controllers, connected equipment, audio systems, and real-time user interfaces. Exact RAM, peripheral, voltage, and package-pin details are retained as data-needed fields rather than inferred from other STM32 devices. The Arm Cortex-M7 core uses a 32-bit RISC architecture and includes floating-point capability in the applicable STM32F7 family documentation. Unlike an application processor, the STM32F765NIH6 is designed around deterministic embedded control, firmware-driven peripherals, and compact real-time operation. Its 216 MHz ceiling provides headroom for protocol processing, control loops, and concurrent peripheral activity, although final performance depends on memory configuration, peripherals, and firmware. Typical applications include industrial automation, factory equipment, industrial networking, audio and signal processing, human-interface systems, and connected embedded products. The 2 MB program memory supports substantially larger firmware than entry-level MCUs, while the 216 MHz core can manage control calculations and communication tasks. Engineers should still budget SRAM, validate clock-tree configuration, and confirm every peripheral and pin assignment against the manufacturer datasheet. For PCB implementation, the 216-TFBGA package demands careful escape routing, uninterrupted supply distribution, and thermal-aware placement. Banked ground connections, short high-speed routes, and verified decoupling should be designed according to the datasheet layout guidance. Because the supplied sources do not publish the complete 216-ball pinout, exact ball names and functions are not asserted here. This product record combines verified manufacturer and distributor specifications, sourcing links, and honest data-gap markers. It does not infer unavailable electrical limits, pricing, pin assignments, or cross-brand replacements; those fields require confirmation before schematic release or production procurement.

Запрос цены Контакты
STM32F765VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765VGT6

STM32F765VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F765VGT6 is a 32-bit Arm Cortex-M7 microcontroller operating up to 216 MHz, with 1 MB of Flash memory in a 100-LQFP 14 x 14 mm package. Its 462 DMIPS performance and DSP-oriented processing make it suitable for industrial control, communications, audio, and embedded systems requiring higher real-time throughput than typical entry-level Cortex-M devices. A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F7 family belongs to the Arm Cortex-M embedded-computing hierarchy and provides integrated flash, SRAM, timers, GPIO, serial interfaces, and communication peripherals. The STM32F765VGT6 combines this embedded integration with a high-performance Cortex-M7 core and hardware caches designed to reduce execution stalls. Key verified features include up to 216 MHz operating frequency, 1 MB (1M x 8) Flash memory, a 32-bit Arm Cortex-M7 core, and a 100-LQFP package. The Cortex-M7 core includes the features identified in the provided technical data: an FPU, DSP instructions, MPU support, ART Accelerator, and separate instruction and data caches. The verified core performance is 462 DMIPS, equivalent to 2.14 DMIPS/MHz using Dhrystone 2.1. The device is positioned for applications that benefit from fast control-loop execution and substantial embedded Flash while retaining a compact 100-pin surface-mount footprint. Its package provides more external connectivity than smaller STM32 packages, allowing designers to connect multiple peripherals without moving to a higher pin-count device. Exact RAM size, voltage range, peripheral inventory, and electrical limits were not provided in the verified data and are therefore not inferred here. Typical design uses include industrial automation, motor and motion control, communications gateways, audio signal processing, data acquisition, and connected embedded equipment. In each case, firmware should use the STM32CubeMX and STM32CubeIDE ecosystems for peripheral configuration and should validate pin multiplexing, clock settings, and peripheral electrical limits against the manufacturer datasheet before production. A key design consideration is ensuring that the selected board, power supply, clock, and decoupling implementation match the device requirements. The 100-LQFP package should be laid out with controlled trace geometry and adequate ground-plane continuity; however, exact recommended capacitor values and routing dimensions require the complete manufacturer datasheet, which was not included in the supplied specification data. This page consolidates the verified manufacturer identity, core frequency, memory configuration, package, pricing references, source links, and engineering comparison points in one searchable record. Values not explicitly present in the verified data remain marked for review rather than being guessed.

Запрос цены Контакты
STM32F765VGT7 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F765VGT7

STM32F765VGT7 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F765VGT7 is an Arm Cortex-M7 32-bit microcontroller operating up to 216 MHz, with 1 MB of Flash memory and a 100-LQFP package measuring 14 mm by 14 mm. It combines the MCU, MCU+FPU category, and Cortex-M7 performance class in one embedded device. A microcontroller is a programmable system-on-chip used to supervise sensors, communications, actuators, and user interfaces. The STM32F7 family combines a high-performance CPU core with embedded memory, peripherals, and external-memory interfaces. The Cortex-M7 architecture includes DSP instructions and an FPU, while the ART Accelerator and L1 cache support efficient execution from embedded Flash and external memories. The verified data identifies a 216 MHz operating frequency, 1 MB of Flash organized as 1M x 8, 16 KB of instruction and data L1 cache, an ART Accelerator, 462 DMIPS under Dhrystone 2.1, and an FPU. The device also supports SDRAM and DFSDM, according to the supplied technical search results. These features position it for real-time control, communications, industrial equipment, IoT, and embedded automation. This device is useful when an embedded design requires substantially more processing capability than a basic Cortex-M class MCU. The Cortex-M7 core can handle signal processing, protocol management, control loops, and user-interface logic, while the 1 MB Flash capacity provides room for application firmware. The 100-LQFP package offers a conventional leaded footprint for prototype and production assembly. Typical applications include industrial controllers, motor-control systems, communications equipment, data acquisition, IoT gateways, and low-power embedded systems. The STM32F765VGT7 should be selected only when the system requires its verified 216 MHz Cortex-M7 performance, 1 MB Flash configuration, and 100-LQFP footprint. Designers must confirm peripheral assignments, pin multiplexing, voltage limits, clocking, memory requirements, and package-level details against the official STMicroelectronics documentation. For new layouts, preserve the defined 100-LQFP footprint, validate all peripheral pins before routing, and provide the required decoupling and clock circuitry specified in the manufacturer documentation. This page combines verified manufacturer and distributor information with engineering-oriented application guidance; unavailable package, electrical, and lifecycle details are marked for data completion rather than inferred.

Запрос цены Контакты
STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST
STM32F765VIH6

STM32F765VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST

The STMicroelectronics STM32F765VIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core operating at up to 216 MHz, with 2 MB of Flash memory, 462 DMIPS of processing performance, and an 8x8 mm 100-ball TFBGA package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, serving as the computational heart of embedded systems. Within the system hierarchy, the STM32F765 belongs to the STM32F7 Series of high-performance MCUs, which sits above mainstream Cortex-M4 families and below multicore application processors, making it the workhorse choice for demanding real-time embedded control. Key features include the Arm Cortex-M7 core with double-precision FPU and Armv7E-M DSP instructions, the adaptive real-time (Art) memory accelerator that achieves 0-wait-state execution from Flash at 216 MHz, and L1 instruction and data caches that maximize performance from external memory. Peripherals include SDRAM interface support, DFSDM (digital filter for sigma-delta modulators), multiple high-speed communication interfaces, and advanced analog blocks suitable for motor control and digital power. Architecturally, the Art Accelerator and 16-Kbyte L1 instruction cache allow the Cortex-M7 to sustain its full 1082 CoreMark/MHz-class throughput even when fetching from on-chip Flash, a key differentiator from earlier Cortex-M families that required SRAM execution for peak performance. The double-precision FPU accelerates scientific and signal-processing math natively without software emulation. Typical applications include industrial motor drives and digital power conversion (leveraging DFSDM and high-resolution timers), medical and test instrumentation requiring 216 MHz DSP throughput, and high-end consumer devices with graphical displays driven via SDRAM and LCD interfaces. A key design consideration: the TFBGA package demands careful PCB design with controlled-impedance fanout, and the low core voltage is generated by an embedded regulator, so follow ST layout guidelines for VCAP capacitors and decoupling. This page synthesizes distributor pricing, verified drop-in alternatives, design guidance, and application notes not consolidated in the manufacturer datasheet.

Запрос цены Контакты
STM32F765VIT6 - 2MB Flash, 512KB RAM Cortex-M7 MCU | STMicroelectronics
STM32F765VIT6

STM32F765VIT6 - 2MB Flash, 512KB RAM Cortex-M7 MCU | STMicroelectronics

The STM32F765VIT6 is a high-performance 32-bit microcontroller from STMicroelectronics based on the ARM Cortex-M7 core, operating at up to 216 MHz. It features 2 MB of Flash memory and 512 KB of SRAM, making it suitable for complex applications requiring substantial code and data storage. The device is housed in a 100-pin LQFP package (LQFP100) and supports a wide supply voltage range of 1.7V to 3.6V. Data verified as of 2026-08-05. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (Flash and SRAM), and programmable input/output peripherals on a single chip. In the system hierarchy, the STM32F765VIT6 is a microcontroller -> embedded processor -> integrated circuit -> semiconductor. This MCU family is part of the STM32F7 series, which is positioned as a high-performance line within the broader STM32 ecosystem, offering a balance of processing power, memory, and peripheral integration for industrial, consumer, and IoT applications. Key features include a 216 MHz ARM Cortex-M7 core with double-precision FPU, 2 MB of dual-bank Flash, 512 KB of SRAM, and a comprehensive set of peripherals: multiple 12-bit ADCs, DACs, timers, USARTs, SPIs, I2Cs, USB OTG HS/FS, Ethernet MAC, camera interface, and cryptographic acceleration. The device also includes a Chrom-ART Accelerator for 2D graphics and a TFT LCD controller, enabling rich user interfaces. The Cortex-M7 core delivers 7 CoreMark/MHz, providing high computational throughput for DSP and control applications. Technically, the STM32F765VIT6 is built on a 40nm process technology, offering low power consumption with multiple low-power modes (Sleep, Stop, Standby). It includes a memory protection unit (MPU), a cache (I-Cache and D-Cache) to optimize performance, and a flexible memory controller (FMC) for external memory expansion. The device supports a wide range of communication interfaces, making it a versatile choice for connectivity-centric designs. Typical applications include industrial control systems, motor drives, power conversion, IoT gateways, audio processing, and advanced human-machine interfaces (HMI). The combination of high clock speed, large memory, and rich peripherals makes it ideal for applications requiring real-time processing and connectivity. When designing with this MCU, pay attention to power supply decoupling: place a 100nF capacitor close to each VDD pin and a 4.7uF capacitor at the main supply. Also, ensure proper layout for the high-speed USB and Ethernet interfaces to maintain signal integrity. The device supports in-circuit programming and debugging via SWD and JTAG, facilitating development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a comprehensive resource for engineers evaluating the STM32F765VIT6.

Запрос цены Контакты
STM32F765ZGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F765ZGT6

STM32F765ZGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F765ZGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with double-precision FPU, operating at up to 216 MHz, integrating 1 MB of Flash memory and 384 KB of SRAM in a 144-pin LQFP package (20x20 mm). It delivers 462 DMIPS (2.14 DMIPS/MHz, Dhrystone 2.1) and supports DSP instructions with single-precision floating point, plus a memory protection unit (MPU) for robust embedded designs. A microcontroller (MCU) is a single-chip embedded computer that combines a processor core, on-chip memory, and programmable peripherals, sitting at the heart of nearly every modern electronic system. Within the component taxonomy, the STM32F765ZGT6 belongs to the STM32F7 series of 32-bit Flash MCUs, which falls under the broader STM32 family and the ARM Cortex-M ecosystem, serving industrial, consumer, and medical applications that demand more compute headroom than Cortex-M4 devices can deliver. The Cortex-M7 in turn inherits from ARM's Cortex-M processor lineage, while MCU itself is a hypernym of microprocessor. Key differentiating features include the Adaptive Real-Time (ART) Accelerator with 16 Kbytes I/D L1 cache enabling 0-wait-state execution from embedded Flash, the Chrom-ART Accelerator (DMA2D) that offloads 2D graphics work, and a rich peripheral set including multiple 12-bit ADCs, DACs, advanced timers, USART/UART, SPI, I2C, CAN, USB OTG full-speed/high-speed, an Ethernet MAC with IEEE 1588 support, and a camera interface. A flexible external memory controller (FMC) supports SDRAM, SRAM, and NOR/NAND Flash for large frame buffers. Technically, the Cortex-M7 6-stage pipeline with branch prediction and dual-issue capability sustains high throughput even under interrupt load, while the integrated FPU accelerates signal-processing tasks. Supply range is 1.7V to 3.6V with operation from -40C to +85C ambient for the STM32F765ZGT6 industrial grade, and the part supports Sleep, Stop, and Standby low-power modes. Typical applications include industrial automation (PLCs, motor control), human-machine interfaces with graphical TFT displays, IoT gateways where the Ethernet MAC enables precise IEEE 1588 time synchronization, and audio processing using the DSP extensions. The wide peripheral set also suits building automation, point-of-sale terminals, and medical instrumentation. Design-wise, place 100nF decoupling capacitors on each VDD pin and a 4.7uF bulk cap on the main supply, follow ST's reference layout for the HSE crystal and VREF+ analog domain, and exploit the low-power modes for battery-sensitive designs. This page synthesizes distributor pricing, drop-in alternatives, FAQ answers, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-10-10.

Запрос цены Контакты
STM32F765ZGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F765ZGT7

STM32F765ZGT7 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

STMicroelectronics STM32F765ZGT7 is a 32-bit Arm Cortex-M7 microcontroller with a 216 MHz maximum operating frequency, 1 MB of flash memory, and a 144-pin LQFP package measuring 20 mm by 20 mm. The device is positioned for high-performance embedded control, connected industrial equipment, audio and communications, and real-time signal-processing systems. Verified distributor data identifies it as an STM32F7-series MCU with DSP, FPU, cache, Art Accelerator, SDRAM, and DFSDM capabilities. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces into one device. The STM32F7 family belongs to the embedded MCU hierarchy and uses the Arm Cortex-M7 RISC architecture. This combination provides a high-performance platform for real-time control while retaining the software portability and ecosystem benefits associated with Arm Cortex-M processors. The STM32F765ZGT7 headline features are its 216 MHz Cortex-M7 core, 1 MB flash capacity, and 144-pin LQFP footprint. Its architecture is designed for high-performance and DSP applications, with the verified sources specifically listing an FPU, cache, Art Accelerator, SDRAM, and DFSDM. The LQFP package provides a large lead count and a mechanically accessible footprint for industrial, communications, and embedded-control boards. Exact RAM, voltage range, peripheral inventory, and temperature limits are not provided in the supplied verified data. The STM32F765xx family combines a 32-bit RISC core with high-performance and DSP-oriented processing. The FPU accelerates floating-point workloads, while cache support can improve instruction and data access behavior in suitable workloads. SDRAM support is relevant for systems requiring external memory, and DFSDM can support applications involving digital filter or ADC-related signal acquisition. These features make the MCU suitable where deterministic control and higher computational throughput are needed beyond a basic general-purpose microcontroller. Typical applications include industrial automation, communications equipment, consumer electronics, medical-device control, automotive electronics, and real-time embedded systems. The 216 MHz operating speed is useful for protocol processing, control loops, and signal-processing tasks, while 1 MB flash provides room for larger firmware and application code. Engineers should verify the complete pinout, electrical limits, memory map, peripheral availability, and package details in the official STMicroelectronics datasheet before final PCB release. A key design consideration is package and firmware verification. Because the supplied evidence confirms a 144-pin LQFP package and a 1 MB flash configuration but does not provide a complete verified pin table, do not rely on generic STM32F7 pin assumptions. Confirm the exact STM32F765ZGT7 datasheet, board support package, clock tree, power rails, decoupling, and exposed thermal requirements. XAIPART provides the product record, source links, pricing tiers, and engineering guidance, while missing technical values remain explicitly marked for validation. This page combines verified distributor availability, the official STMicroelectronics family description, package and processor specifications, application context, and replacement-screening guidance. It is intended to accelerate component search and engineering review without inventing electrical values that were not supplied by the verified sources.

Запрос цены Контакты
STM32F765ZIT6 - 216MHz Cortex-M7 MCU, 2MB Flash, LQFP-144 | STMicroelectronics
STM32F765ZIT6

STM32F765ZIT6 - 216MHz Cortex-M7 MCU, 2MB Flash, LQFP-144 | STMicroelectronics

The STMicroelectronics STM32F765ZIT6 is a high-performance 32-bit Arm Cortex-M7 microcontroller operating at up to 216 MHz, packaged in a 144-pin LQFP with 2 MB of embedded Flash and 512 KB of SRAM. It integrates a double-precision FPU, DSP instructions, and a 16-Kbyte I-cache plus 16-Kbyte D-cache, enabling 0-wait-state execution from Flash at full 216 MHz speed and delivering up to 462 DMIPS (2.14 DMIPS/MHz). The LQFP-144 footprint also exposes the full set of high-speed peripherals required for graphics, Ethernet, and USB 2.0 HS workloads. An MCU (Microcontroller Unit) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals such as timers, ADCs, and communication interfaces. The STM32F7 family sits at the high-performance end of the Cortex-M hierarchy — Cortex-M7 > Cortex-M4 > Cortex-M3 > Cortex-M0 — and is a member of the broader Arm Cortex-M MCU taxonomy under embedded microcontrollers, semiconductor devices, and integrated circuits. Within ST's portfolio, the F7 line bridges Cortex-M4-class parts (such as the STM32F4 series) and Cortex-M7 application processors. Key features include up to 17 timers (including motor-control, HRTIM, and 32-bit timers), two 12-bit ADCs sampling at 2.4 MSPS, two 12-bit DACs, a true random number generator (RNG), cryptographic accelerators, and a Chrom-ART accelerator for offloading GUI rendering. An integrated 2.4-inch TFT-LCD controller (LTDC) supports up to XGA resolution without an external graphics chip, while USB 2.0 High-Speed with on-chip PHY and 10/100 Ethernet with IEEE 1588 make the part attractive for connected embedded designs. Architecturally, the Cortex-M7 core pairs a 6-stage superscalar pipeline with branch prediction and tightly-coupled memory for deterministic interrupt response. The 2 MB of dual-bank Flash supports read-while-write for safe in-field firmware upgrades, and the 512 KB SRAM is split into multiple AHB-matrix regions for simultaneous DMA and CPU access. This bandwidth is what allows driving parallel TFT displays while running DSP-style audio or motor-control loops concurrently. Typical applications include industrial HMI panels with TFT-LCD touchscreens, motor-control and field-oriented control drives, industrial Ethernet gateways, USB audio interfaces, and barcode/scanner modules. Specific uses range from PLC operator panels to medical instrumentation front-ends and office printers requiring raster image processing. When PCB area is constrained, designers often migrate to the LQFP-100 or LQFP-176 versions of the same silicon, but the ZIT6 in LQFP-144 maximizes peripheral exposure without stepping up to a BGA. For power-supply design, the part requires a 1.8V to 3.6V supply with decoupling on every VDD/VBAT pin; bypassing must keep PCB track inductance below roughly 1 nH to avoid noise coupling into the PLL. Trade-off: peak performance at 216 MHz pushes core current beyond 100 mA, so efficiency-aware designs often drop to 180 MHz when full throughput is not required. This page synthesizes distributor pricing, same-package drop-in alternatives from across the STM32 family, and design notes not contained in a single manufacturer datasheet.

Запрос цены Контакты
STM32F765ZIT7 - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics (Tape & Reel)
STM32F765ZIT7

STM32F765ZIT7 - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F765ZIT7 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS of compute throughput, housed in a 144-pin LQFP (20x20 mm) package. It integrates 2 MB of embedded Flash and 512+16+4 KB of SRAM, plus an extensive set of high-speed peripherals including USB OTG HS/FS, two CAN 2.0B interfaces, an LCD-TFT controller, an MIPI-DSI host, and a hardware cryptographic accelerator suite. The 'I' suffix denotes the industrial-grade (-40C to +85C) operating range, and 'TR' designates Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The Cortex-M7 is ARM's highest-performance Cortex-M core, featuring a six-stage superscalar pipeline, branch prediction, and an integrated single-precision floating-point unit; it sits at the top of the Cortex-M family alongside the Cortex-M4 and Cortex-M33. STM32F7-series MCUs belong to the broader ARM Cortex-M taxonomy, which itself falls under 32-bit RISC microcontrollers and, more generally, embedded microprocessors and semiconductor ICs. Compared with Cortex-M4 parts, the Cortex-M7 offers roughly doubled DSP performance and is aimed at demanding signal-processing and graphics workloads. Key features that distinguish this part include the dual-bank 2 MB Flash with ART Accelerator for zero-wait-state execution from Flash, 16-bit and 32-bit timers, up to 28 communication interfaces (USART/UART/SPI/I2S/I2C), a 12-bit ADC reaching 2.4 MSPS, two 12-bit DACs, an SDMMC host interface for external SD cards or eMMC, and an Ethernet MAC with dedicated DMA. The integrated cryptographic accelerator (AES-256, SHA-1/SHA-2, HMAC, and TRNG) enables hardware-bound secure boot and TLS/SSL offload. The Chrom-ART Accelerator 2D DMA engine accelerates bitmap operations for HMI applications. Typical applications include industrial motor drives and PLCs, medical patient-monitoring and diagnostic equipment, human-machine interface (HMI) panels with TFT-LCD or DSI displays, factory-automation controllers with EtherCAT/PROFINET bridges, point-of-sale terminals, building-automation gateways, and audio-processing units including USB audio class endpoints. The 216 MHz Cortex-M7 with single-precision FPU and DSP extensions makes the part particularly suited to real-time FFT-based analytics, digital filtering, and motor-control algorithms using FOC (field-oriented control). Pin-compatible upgrades within the STM32F765 family extend to the STM32F767/F769 line for projects that need additional MIPI-DSI lanes or the SPDIF interface. When designing with this MCU, attention must be paid to decoupling (1 uF + 100 nF near each VDD pin), the layout of the 25 MHz HSE crystal traces within 5 mm of the OSC_IN/OSC_OUT pins, and the thermal dissipation in continuous high-CPU-load scenarios. The 144-LQFP package has a thermal resistance of approximately 38 C/W (theta_JA on a 4-layer JEDEC board) and is adequate for industrial operating points up to about 0.8 W steady-state dissipation without airflow. This page synthesizes 144-LQFP same-package drop-in alternatives, distributor pricing tiers, and practical design notes not found in a single source.

Запрос цены Контакты
STM32F765ZIT7TR - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics
STM32F765ZIT7TR

STM32F765ZIT7TR - 216MHz Cortex-M7 MCU, 2MB Flash, 144-LQFP | STMicroelectronics

The STMicroelectronics STM32F765ZIT7TR is a high-performance ARM Cortex-M7 32-bit RISC microcontroller with FPU, operating at up to 216 MHz and delivering 462 DMIPS of compute throughput, housed in a 144-pin LQFP (20x20 mm) package. It integrates 2 MB of embedded Flash and 512+16+4 KB of SRAM, plus an extensive set of high-speed peripherals including USB OTG HS/FS, two CAN 2.0B interfaces, an LCD-TFT controller, an MIPI-DSI host, and a hardware cryptographic accelerator suite. The 'I' suffix denotes the industrial-grade (-40C to +85C) operating range, and 'TR' designates Tape & Reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable I/O peripherals. The Cortex-M7 is ARM's highest-performance Cortex-M core, featuring a six-stage superscalar pipeline, branch prediction, and an integrated single-precision floating-point unit; it sits at the top of the Cortex-M family alongside the Cortex-M4 and Cortex-M33. STM32F7-series MCUs belong to the broader ARM Cortex-M taxonomy, which itself falls under 32-bit RISC microcontrollers and, more generally, embedded microprocessors and semiconductor ICs. Compared with Cortex-M4 parts, the Cortex-M7 offers roughly doubled DSP performance and is aimed at demanding signal-processing and graphics workloads. Key features that distinguish this part include the dual-bank 2 MB Flash with ART Accelerator for zero-wait-state execution from Flash, 16-bit and 32-bit timers, up to 28 communication interfaces (USART/UART/SPI/I2S/I2C), a 12-bit ADC reaching 2.4 MSPS, two 12-bit DACs, an SDMMC host interface for external SD cards or eMMC, and an Ethernet MAC with dedicated DMA. The integrated cryptographic accelerator (AES-256, SHA-1/SHA-2, HMAC, and TRNG) enables hardware-bound secure boot and TLS/SSL offload. The Chrom-ART Accelerator 2D DMA engine accelerates bitmap operations for HMI applications. Typical applications include industrial motor drives and PLCs, medical patient-monitoring and diagnostic equipment, human-machine interface (HMI) panels with TFT-LCD or DSI displays, factory-automation controllers with EtherCAT/PROFINET bridges, point-of-sale terminals, building-automation gateways, and audio-processing units including USB audio class endpoints. The 216 MHz Cortex-M7 with single-precision FPU and DSP extensions makes the part particularly suited to real-time FFT-based analytics, digital filtering, and motor-control algorithms using FOC (field-oriented control). Pin-compatible upgrades within the STM32F765 family extend to the STM32F767/F769 line for projects that need additional MIPI-DSI lanes or the SPDIF interface. When designing with this MCU, attention must be paid to decoupling (1 uF + 100 nF near each VDD pin), the layout of the 25 MHz HSE crystal traces within 5 mm of the OSC_IN/OSC_OUT pins, and the thermal dissipation in continuous high-CPU-load scenarios. The 144-LQFP package has a thermal resistance of approximately 38 C/W (theta_JA on a 4-layer JEDEC board) and is adequate for industrial operating points up to about 0.8 W steady-state dissipation without airflow. This page synthesizes 144-LQFP same-package drop-in alternatives, distributor pricing tiers, and practical design notes not found in a single source.

Запрос цены Контакты
STM32F767BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F767BGT6

STM32F767BGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STM32F767BGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, built around the Arm® Cortex®-M7 core with a floating-point unit (FPU) and digital signal processing (DSP) instructions. Operating at up to 216 MHz, it delivers 462 DMIPS, making it suitable for demanding embedded applications. The device integrates 1 MB of flash memory and 512 KB of SRAM, along with a rich set of peripherals including USB OTG HS/FS, multiple communication interfaces, an LCD controller, and a DSI host. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals on a single chip. The STM32F7 series sits at the high-performance end of the STM32 portfolio, positioned above the mainstream F4 series and below the application processors in the STM32MP1 line. This hierarchy places the STM32F767BGT6 as a top-tier MCU for applications requiring significant compute power and connectivity. Key features include a 216 MHz Arm Cortex-M7 core with double-precision FPU, 1 MB of flash memory, 512 KB of SRAM, and a comprehensive set of peripherals. The device supports a wide range of communication interfaces, including USB OTG HS/FS, Ethernet, multiple USARTs, SPIs, I2Cs, and CAN. It also features an LCD-TFT controller and a DSI host, enabling direct connection to displays. The STM32F767BGT6 is available in a 208-pin LQFP package (28x28 mm), providing ample I/O for complex designs. The STM32F767BGT6 leverages the Arm Cortex-M7 architecture, which includes a 6-stage pipeline, branch prediction, and a memory protection unit (MPU). The FPU supports both single and double precision, accelerating mathematical operations for signal processing and control algorithms. The device also includes a Chrom-ART Accelerator™ for 2D graphics, offloading the CPU for graphical user interfaces. With its high clock speed and advanced peripherals, the STM32F767BGT6 excels in applications such as industrial control, motor control, audio processing, and human-machine interfaces. Typical applications include high-end industrial automation, robotics, audio processing, and advanced human-machine interfaces. The device's high performance and rich peripheral set make it ideal for applications requiring real-time control and complex user interfaces. For example, in industrial automation, the STM32F767BGT6 can handle multiple communication protocols simultaneously while executing complex control algorithms. When designing with the STM32F767BGT6, ensure adequate power supply decoupling with 100 nF capacitors close to each power pin and a bulk capacitor. The device supports a wide supply voltage range of 1.7V to 3.6V, allowing flexible power design. For high-speed communication interfaces, pay attention to PCB layout to maintain signal integrity.

Запрос цены Контакты
STM32F767BIT6 - ARM Cortex-M7 MCU, 2MB Flash, 216MHz | STMicroelectronics
STM32F767BIT6

STM32F767BIT6 - ARM Cortex-M7 MCU, 2MB Flash, 216MHz | STMicroelectronics

The STMicroelectronics STM32F767BIT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU, 2 MB of embedded Flash and 512 KB of SRAM, integrated into a 208-pin LQFP (28x28 mm) package. Key headline specifications include a 216 MHz maximum CPU clock delivering 462 DMIPS (2.14 DMIPS/MHz, Dhrystone 2.1), DSP instructions and an ART Accelerator with 16 KB I/D L1 cache enabling zero-wait-state execution from Flash. The device integrates a Cryptography accelerator (AES-256, Hash, RNG) and an Embedded SDRAM controller supporting external SDRAM up to 32-bit wide. What is a Cortex-M7 MCU? An ARM Cortex-M7 microcontroller is a high-end 32-bit microcontroller core designed by Arm for deterministic real-time embedded systems. The Cortex-M7 belongs to the Cortex-M family and is positioned above Cortex-M4 by adding a double-precision FPU, single-precision floating-point pipeline, branch prediction, and tightly-coupled instruction/data caches. The STM32F7 line is part of ST's mainstream performance tier that also introduces MIPI-DSI display, USB Type-C / Power Delivery and a richer analog set over the F4 generation, making it suitable for industrial control, audio DSP, HMI graphics and motor-control loops. Key features of the STM32F767BIT6 include: up to 18 timer channels, three 12-bit ADC converters (up to 2.4 MSPS each), two 12-bit DACs, a USB 2.0 OTG full-speed/high-speed PHY, two CAN 2.0B controllers, an SDIO/MMC interface, a Quad-SPI flash interface and an LCD-TFT controller. The Cryptography block accelerates AES-256, SHA-1/SHA-2 hashing, and true RNG, easing secure-boot and TLS link setups. The 208-LQFP footprint routes out 162 GPIO pins plus a wide parallel-interface bus, sufficient for SDRAM + TFT display + Ethernet + USB Type-C concurrently. The architecture pairs a dual-issue FPU + DSP pipeline with ART Accelerator to minimise flash wait-states; combined with the 16 KB L1 cache, the device achieves 462 DMIPS at 216 MHz with deterministic interrupt latency of <30 ns typical. Cryptography hardware offloads AES, SHA-1/2 and RNG; this dramatically reduces CPU overhead in TLS handshakes compared to software-only implementations. Embedded SRAM is split into 384 KB DTCM + 128 KB SRAM + 4 KB backup SRAM, with the SDRAM controller extending external memory up to 32-bit wide for display or data buffers. Typical applications are industrial HMI panels, motor drives and servo controllers, USB-C PD chargers and audio DSP platforms. The combination of TFT-LCD controller + DMA2D + SDRAM controller + USB high-speed on-chip PHY makes the F767 a single-chip candidate for 4.3-inch touchscreen displays with secure field updates. When designing with this device the 1.7-3.6 V supply and an external 25 MHz HSE crystal (with optional LSE 32.768 kHz for RTC) must be provided. Decoupling follows ST AN4365 placement rules: 100 nF + 4.7 µF near each VDD/VSS pair, plus a dedicated 1 µF bulk for the USB OTG PHY rail. For SDRAM operation use layed-out matched length with VREF = VDD/2 and 50 Ω impedance; bypass VBAT with a 0.1 µF cap if no battery is fitted.

Запрос цены Контакты
STM32F767IGK6 - 216MHz Cortex-M7 MCU 1MB Flash 176+25UFBGA
STM32F767IGK6

STM32F767IGK6 - 216MHz Cortex-M7 MCU 1MB Flash 176+25UFBGA

The STMicroelectronics STM32F767IGK6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU and DSP instructions, operating at up to 216 MHz and delivering 462 DMIPS / 1082 CoreMark performance. It integrates 1 MB of Flash and 512 KB of SRAM in a 176+25-pin UFBGA (10x10 mm) package, with 140 I/O ports supporting a wide range of peripherals including Ethernet MAC, USB OTG, CAN, SDMMC, and three 12-bit ADCs. An ARM Cortex-M7 microcontroller belongs to the ARM Cortex-M processor family, designed for embedded real-time systems. The Cortex-M7 is the highest-performance member of this family, featuring a superscalar pipeline, branch prediction, single-precision and double-precision FPU, and dedicated DSP extensions (SIMD). These MCUs sit in the embedded processor hierarchy: microcontroller -> embedded processor -> semiconductor IC, and are used wherever deterministic real-time response, rich connectivity, and graphics/audio processing are required in a single chip. Key features include an integrated 216 MHz Cortex-M7 core with 16 KB I-cache and 16 KB D-cache for high-throughput execution, hardware JPEG codec, random number generator (TRNG), and crypto/hash peripherals supporting AES-256, SHA-256, and HMAC. Three 12-bit ADCs sample at 2.4 MSPS each, and the device also includes two 12-bit DACs, up to 18 timers, and an SDMMC interface for microSD card storage. The LQFP176/UFBGA176 family pinout supports display interfaces (LCD-TFT) and an 8- to 14-bit camera parallel interface. The architecture combines an AXI/AHB multilayer bus matrix with a dedicated Chrom-ART graphics accelerator, enabling efficient on-chip LTDC and DMA2D operations without burdening the CPU. This makes the STM32F767IGK6 suitable for human-machine interfaces (HMI), where the CPU remains free for application logic while the accelerator handles pixel rendering. Typical applications include industrial HMI panels with TFT LCD touchscreens, motor-control inverter boards, building-automation gateways with Ethernet connectivity, point-of-sale and barcode-scanner terminals, medical patient-monitoring front panels, and consumer audio products that need MP3/WMA decoding with on-the-fly graphics overlays. When designing with this part, ensure that the PCB's thermal copper pour covers the exposed pad of the UFBGA to meet the 216 MHz current demand; an inadequate thermal land will push the junction temperature above the 125 C limit during heavy DMA and graphics workloads. Use the STM32CubeMX tool to configure the GPIO/AF matrix, and pair the MCU with an external SDRAM when the on-chip 512 KB SRAM is insufficient for frame buffers. This page synthesises verified distributor pricing, same-family drop-in alternatives, and practical thermal/PCB layout notes not consolidated in the STMicroelectronics datasheet DM00273119 alone.

Запрос цены Контакты
STM32F767IIK6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics
STM32F767IIK6

STM32F767IIK6 - 216MHz Cortex-M7 2MB MCU | STMicroelectronics

The STMicroelectronics STM32F767IIK6 is a 32-bit Arm Cortex-M7 microcontroller operating at 216 MHz, with 2 MB of embedded Flash memory and a 176-ball UFBGA package measuring 10 mm by 10 mm. It combines high-performance floating-point and signal-processing capability with extensive connectivity and memory resources for demanding embedded systems. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, peripherals, and communication interfaces on one semiconductor device. The STM32F7 series belongs to the high-performance Arm Cortex-M embedded-microcontroller hierarchy, combining real-time control with substantially greater compute throughput than basic 8-bit or 16-bit controllers. The STM32F767IIK6 therefore sits between conventional control MCUs and higher-complexity application processors. Verified distributor data identifies an Arm Cortex-M7 core, 32-bit architecture, 216 MHz maximum clock, and 2 MB Flash organized as 2M x 8 bits. Additional datasheet-index data lists 462 DMIPS, 512 KB plus 16 KB plus 4 KB RAM, USB OTG high-speed and full-speed support, 28 communication interfaces, LCD capability, and DSI capability. These features suit high-throughput control, communications, graphics, audio, and data-acquisition systems. The 176+25 UFBGA package provides a compact surface-mount solution but requires careful PCB escape routing, clean power delivery, and adequate thermal design. Compared with a leaded package, its fine-pitch ball grid increases assembly and inspection complexity, although it supports denser industrial and embedded products. Its 216 MHz Cortex-M7 core offers more compute headroom than lower-frequency STM32 devices, while the 2 MB Flash capacity simplifies firmware storage and update handling. Typical uses include industrial automation, network-connected embedded equipment, motor and motion control, USB peripherals, display systems, and high-speed signal processing. The part is also appropriate for audio and communications equipment when a high-performance MCU, integrated USB, and substantial Flash are more important than a low-cost minimal controller. Exact peripheral availability, electrical limits, pin functions, and programming requirements should be confirmed in the manufacturer datasheet before layout or firmware deployment. Because pin multiplexing, power sequencing, decoupling, and signal-integrity requirements are package-sensitive, preserve the manufacturer's reference layout and validate the final PCB across temperature, voltage, and peripheral loads. This data page synthesizes distributor specifications, sourcing information, application guidance, and engineering considerations for STM32F767IIK6.

Запрос цены Контакты
STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics
STM32F767IIT6

STM32F767IIT6 - 216MHz Cortex-M7 MCU 2MB Flash | STMicroelectronics

The STMicroelectronics STM32F767IIT6 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller operating at up to 216 MHz, packaged in a 176-pin LQFP (24x24 mm) and integrating 2 MB of Flash plus 512 KB of SRAM. According to the official datasheet, it delivers 462 DMIPS / 2.14 DMIPS/MHz (Dhrystone 2.1) and includes a single-precision FPU, 16 KB I/D L1 cache, and the ART Accelerator that enables 0-wait-state execution from embedded Flash. An ARM Cortex-M7 microcontroller (MCU) is a 32-bit processor core designed for high-performance, deterministic embedded applications such as motor control, audio processing, and industrial networking. The Cortex-M7 sits at the top of the Cortex-M family, above Cortex-M4/M33, in the broader taxonomy of microcontrollers -> embedded processors -> semiconductors. It adds dual-issue pipeline, tightly-coupled memory, and SIMD DSP instructions while retaining the deterministic interrupt response that made Cortex-M ubiquitous in real-time designs. Key features of the STM32F767IIT6 include integrated crypto/hash peripherals (AES, SHA, MD5, HMAC), a TFT LCD controller, a JPEG codec, two USB OTG controllers (FS + HS with PHY), two CAN 2.0B interfaces, an Ethernet MAC, an SDMMC interface, three I2C, six SPI (two with I2S), four USART plus two UART, and 12-bit ADC/DAC blocks. Chrom-ART (DMA2D) acceleration and the proprietary Chrom-GRC graphics functions simplify TFT GUI development. Architecturally, the part pairs the Cortex-M7 core with a multi-AHB bus matrix, dual-bank Flash for safe field updates, and a flexible low-power run/sleep/stop/standby/shutdown power profile. Internal regulators plus VBAT domain preserve RTC and backup registers during main-rail loss, and four PWM-capable 16-bit timers plus two 32-bit timers support complex motor-control or digital-power topologies. Typical applications include HMI panels with TFT LCD, industrial PLCs and inverters, audio processing and codec bridging, secure IoT gateways, and USB-based peripherals or test instruments. The wide peripheral mix makes it a single-chip solution for products that previously required an MPU plus external peripherals. When designing with this MCU, allocate PCB area for LQFP-176 fanout and provide bulk decoupling on each VDDS/VDD pair. Use ST's STM32CubeMX to generate pin mux and clock-tree configurations and validate trace routing for the parallel TFT interface if used. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes beyond the manufacturer datasheet, giving engineers a single reference for sourcing and design validation.

Запрос цены Контакты
STM32F767NIH6 - 32-bit ARM Cortex-M7 MCU, 2MB Flash, 216MHz | STMicroelectronics
STM32F767NIH6

STM32F767NIH6 - 32-bit ARM Cortex-M7 MCU, 2MB Flash, 216MHz | STMicroelectronics

The STMicroelectronics STM32F767NIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core with double-precision FPU, running at up to 216 MHz and achieving 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), housed in a 216-pin TFBGA package (13x13 mm). It integrates 2 MB of Flash memory, 512 KB of SRAM, and a 16 Kbyte I/D cache enabling 0-wait-state execution from embedded Flash and external memories, plus DSP instructions and a Chrom-ART Accelerator for 2D graphics offload. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, on-chip memory (Flash and SRAM), and programmable I/O peripherals on a single die, intended to govern a specific operation in an embedded system. Microcontrollers are the backbone of embedded designs ranging from simple motor controllers to complex IoT gateways. The STM32F767NIH6 belongs to the STM32F7 series, a high-performance family within the broader STM32 ecosystem positioned for graphics-rich HMI, motor control, and audio processing where Cortex-M4 class performance is insufficient. Key features of the STM32F767NIH6 include 4x I2C, 4x USART, 4x UART, 6x SPI, 3x CAN, 2x USB OTG, 1x Ethernet MAC, 1x SDMMC, a 16-bit ADC at 3.6 MSPS, a 12-bit DAC, hardware AES/3DES/DES cryptographic engines, a true random number generator (TRNG), 159 I/O lines, a 32-bit external data bus, and a 26-bit address bus. The device also integrates a JPEG codec, DFSDM (digital filter for sigma-delta modulators), and a TFT LCD controller for direct display driving without external graphics RAM. Technically, the STM32F767NIH6 uses an ART Accelerator with branch prediction and a 6-stage pipeline to maintain 0-wait-state Flash access at full 216 MHz, while dual-bank Flash supports read-while-write firmware updates. The MPU, separate instruction and data caches, and DSP extensions allow real-time DSP workloads alongside control tasks. The device operates from 1.7V to 3.6V across -40C to +85C (industrial grade) and offers multiple low-power modes. Typical applications include industrial control systems, motor drives, IoT gateways, human-machine interfaces (HMIs) with TFT displays, audio processing, and high-end consumer electronics. The combination of 216 MHz performance, large memory, and rich peripherals makes it ideal for applications that demand real-time processing and connectivity. When designing with this MCU, ensure proper decoupling of the power supply pins and a stable clock source. The device supports multiple boot modes and has a flexible power management scheme with multiple low-power modes. For high-speed interfaces like Ethernet and USB, careful PCB layout is essential to maintain signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, plus comparison tables and AEO-optimized application guidance.

Запрос цены Контакты
STM32F767VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics
STM32F767VGT6

STM32F767VGT6 - 216MHz Cortex-M7 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F767VGT6 is an Arm Cortex-M7 32-bit microcontroller with a 216 MHz operating frequency, 1 MB of Flash memory, and a 100-pin LQFP package measuring 14 x 14 mm. It combines high-performance DSP and floating-point capability with extensive connectivity and memory resources for demanding embedded systems. A microcontroller is a programmable system-on-chip that integrates a processor core, Flash program memory, RAM, peripherals, and communication interfaces. The Cortex-M7 MCU category sits within embedded processors and extends from real-time control to high-performance graphics, networking, and audio. STM32F7 devices are suited to systems that require substantially more computation than basic control-only MCUs. Verified features for the STM32F767VGT6 include an Arm Cortex-M7 core operating up to 216 MHz, 1 MB of Flash, 512 KB of RAM, and an integrated floating-point unit. The family also includes cache, SDRAM support, TFT interfaces, JPEG acceleration, DFSDM, and an ART accelerator according to the supplied manufacturer-family and distributor references. These resources support responsive control loops and multimedia data movement. The STM32F767VG family devices share a common high-performance architecture. Compared with a Cortex-M3-class MCU, the Cortex-M7 core provides a stronger foundation for signal processing, communications, and control. Cache and accelerator features can improve execution around data-intensive workloads, but firmware, memory placement, peripheral configuration, and real-time timing still require careful validation. Typical uses include industrial automation, connected equipment, motor control, metering, embedded IoT devices, human-machine interfaces, and audio or image-processing systems. The 1 MB Flash capacity can hold a substantial application and protocol stack, while 512 KB of RAM supports buffered data. Exact peripheral availability, pin multiplexing, electrical limits, and memory-map behavior must be checked in the manufacturer datasheet before schematic capture. A key design step is allocating pins according to the selected package and complete peripheral-alternative functions. Because this MCU combines many interfaces, conflicting assignments can move a signal from a timer output, analog input, communication pin, or high-speed interface to another pad. Power, decoupling, clock, boot, reset, and exposed-pad requirements should therefore be implemented exactly as specified by STMicroelectronics. This page combines verified manufacturer and distributor specifications with sourcing context and engineering guidance. It also distinguishes verified facts from missing parametric, pinout, price-tier, and compliance details so engineers can assess fit without treating unverified information as production-ready data.

Запрос цены Контакты
STM32F767VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST
STM32F767VIH6

STM32F767VIH6 - 216MHz Cortex-M7 MCU 2MB Flash | ST

The STMicroelectronics STM32F767VIH6 is a high-performance 32-bit microcontroller based on the Arm Cortex-M7 core with double-precision FPU, running at up to 216 MHz and delivering 462 DMIPS (2.14 DMIPS/MHz), with 2 Mbytes of embedded Flash memory, housed in a 100-ball TFBGA (8x8 mm) package. A microcontroller (MCU) is a single-chip integrated circuit that combines a processor core, memory, and peripherals into one device, forming the lowest tier of the embedded computing hierarchy: MCU -> embedded processor -> system-on-chip. The STM32F7 series sits at the top of the STM32 general-purpose MCU portfolio, targeting applications that need near-application-processor performance with MCU-class real-time behavior and power consumption. Key features include the ART Accelerator and 16 Kbyte L1 instruction/data caches enabling 0-wait-state execution from embedded Flash, a single-precision/double-precision FPU and DSP instructions for signal processing, plus rich peripherals including SDRAM interface, TFT LCD controller, hardware JPEG codec, and DFSDM digital filter for sigma-delta modulators. Architecturally, the Cortex-M7 core pairs with the Chrom-ART Accelerator (DMA2D) for graphics bandwidth offload, while the ART Accelerator prefetches instructions to hide Flash latency at 216 MHz. Multiple embedded SRAM blocks and a flexible external memory controller (FMC) support SDRAM frame buffers for the TFT controller. Typical applications include industrial HMI and TFT display panels, motor control and power conversion, medical and test equipment, IoT gateways, and consumer devices requiring GUI rendering and fast DSP. Design consideration: at 216 MHz with external SDRAM, signal integrity and power distribution on the BGA footprint require careful decoupling and length-controlled routing for the FMC interface. This page synthesizes distributor stock data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты
STM32F767VIT6 - 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F767VIT6

STM32F767VIT6 - 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F767VIT6 is an Arm Cortex-M7 32-bit microcontroller operating up to 216 MHz, with 2 MB of Flash memory and a 100-LQFP 14 x 14 mm package. Its high-performance MCU architecture combines a 32-bit RISC core, hardware DSP capability, extensive connectivity, and a broad set of peripherals for demanding embedded systems. A microcontroller such as the STM32F767VIT6 is a complete programmable control platform containing a processor core, memory, communication interfaces, timers, analog peripherals, and general-purpose input/output. The STM32F7 family is used where performance, real-time control, connectivity, and system integration matter more than the lowest possible unit cost or power consumption. The verified product data identifies a 216 MHz operating frequency, 2 MB Flash configuration, and a 100-LQFP package. The STM32F7 platform is also described by STMicroelectronics as featuring an Arm Cortex-M7 32-bit MCU with FPU capability and up to 462 DMIPS. Its performance-oriented design makes it suitable for industrial control, communications, audio and digital signal processing, networking, and connected embedded equipment. The STM32F767VIT6 belongs to a family of devices based on the Arm Cortex-M7 core, providing a common hardware and software platform for control, connectivity, and real-time processing tasks. Designers should allocate memory and peripheral resources according to the specific STM32F767xx device variant and verify the complete pinout, electrical limits, startup requirements, and peripheral availability against the manufacturer datasheet before layout release. Typical applications include industrial automation controllers, communications equipment, motor-control systems, audio processors, HMI platforms, and connected sensors. The 100-LQFP package provides a practical land pattern for designs requiring many external connections while avoiding the mechanical complexity of very fine-pitch BGA packages. The device is appropriate when firmware requires substantial processing performance and a broad peripheral set in a conventional surface-mount package. When designing around the STM32F767VIT6, verify the exact package pin assignments, power requirements, clock configuration, memory organization, and unused-pin handling. Decoupling, exposed-ground layout, signal integrity, and firmware configuration remain important because a high-performance MCU can require careful clock, power, and peripheral planning even when the application is primarily control-oriented. This page consolidates verified manufacturer and distributor information with package, sourcing, design, application, and comparison guidance to support faster engineering evaluation.

Запрос цены Контакты
STM32F767ZIT6 - 216MHz Cortex-M7 2MB Flash MCU | ST
STM32F767ZIT6

STM32F767ZIT6 - 216MHz Cortex-M7 2MB Flash MCU | ST

The STMicroelectronics STM32F767ZIT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller running at up to 216 MHz (462 DMIPS / 1082 CoreMark) with 2 MB of Flash memory, 512 KB of SRAM, and a 144-pin LQFP (20x20 mm, 0.5 mm pitch) surface-mount package. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die to govern a dedicated operation in an embedded system. The STM32F767ZIT6 belongs to the STM32F7 series within the broader STM32 family of Arm Cortex-M MCUs, positioning it in the high-performance tier of the embedded processing hierarchy, above mainstream Cortex-M4 devices such as the STM32F4 series. Key features include a double-precision FPU and DSP instructions on the Cortex-M7 core, an ART Accelerator and 8 KB instruction/data caches for zero-wait-state execution from Flash, a Chrom-ART Accelerator for 2D graphics, and a TFT LCD controller. Rich connectivity covers USART/UART, SPI, I2C, CAN, USB OTG HS/FS, Ethernet MAC, and camera interfaces, alongside multiple 12-bit ADCs and 16-bit DACs. Technically, the device integrates a hardware cryptographic accelerator (AES, DES/TDES, SHA-1, SHA-256) and a true random number generator (TRNG), with a flexible memory controller (FMC) supporting external SDRAM, NOR, and NAND. The 90 nm process balances high clock speed with low power, and dynamic clock gating supports low-power modes for battery-sensitive designs. Typical applications include industrial control and motor drives, human-machine interfaces with TFT displays, IoT gateways, audio processing, and test instrumentation, where 216 MHz performance and Ethernet/USB connectivity justify a high-performance Cortex-M7 platform. Design consideration: the MCU requires a 3.3V supply with 100 nF plus 4.7 uF decoupling capacitors at each VDD pair, and the two VCAP capacitors are mandatory for core regulation stability; it operates from -40C to +85C. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet, providing a complete selection and implementation resource.

Запрос цены Контакты
STM32F769BGT6 - 2MB Flash, 216MHz Cortex-M7 MCU | STMicroelectronics
STM32F769BGT6

STM32F769BGT6 - 2MB Flash, 216MHz Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F769BGT6 is a high-performance ARM Cortex-M7 microcontroller with a double-precision FPU, operating at up to 216 MHz. It integrates 2 MB of Flash and 512 KB of SRAM, and is housed in a 208-pin LQFP package (TFBGA/LQFP208 family) supporting TFT-LCD, Ethernet, USB, and hardware cryptography for graphics-rich secure embedded designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, volatile memory (SRAM), non-volatile memory (Flash), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, ranging from simple household appliances to complex industrial automation. The STM32F769BGT6 belongs to the STM32F7 series within the broader STM32 family of 32-bit ARM Cortex-M microcontrollers, placing it in the high-performance segment with advanced connectivity, hardware crypto, and TFT graphics. Key specifications include a Chrom-ART Accelerator that offloads 2D DMA transfers from the CPU, an integrated TFT-LCD controller supporting resolutions up to WXGA, an 8 KB instruction cache and 8 KB data cache for low-latency code execution, and a hardware cryptographic accelerator plus True Random Number Generator (TRNG) for secure-boot and TLS applications. Operating voltage spans 1.7 V to 3.6 V across the industrial -40 °C to +85 °C range. Technically, the device is fabricated on a low-power 40 nm CMOS process and includes the M7 instruction cache, DTCM and AXI/AHB bus matrix, DSP extensions, and the STM32 standard library ecosystem (HAL/LL drivers, STM32CubeMX). External memory interfaces include FMC for SDRAM, NOR/NAND Flash, and SRAM expansion. This architecture cleanly separates code, data, and peripheral DMA traffic. Typical applications include human-machine interface (HMI) panels with TFT displays, industrial PLCs, secure IoT gateways, point-of-sale terminals, motor-control drives, and medical imaging controllers. The combination of high clock speed, hardware crypto, and Ethernet MAC makes it ideal for connected, secure, graphics-rich products. When designing with this LQFP-208 device, follow ST's recommended land pattern and use a 4-layer PCB with a solid ground plane for the high-speed SDMMC, USB, and Ethernet signals. Provide dedicated 100 nF + 4.7 µF decoupling on each VDD pin, keep the NRST reset trace short, and ensure the BYPASS_REG pin uses a 1 nF + 1 µF network for internal LDO stability. This page synthesizes distributor pricing, drop-in alternatives, application companions, and practical design notes beyond the manufacturer datasheet to accelerate your BOM and firmware decisions.

Запрос цены Контакты
STM32F769BIT6 - Cortex-M7 MCU 2MB Flash 216MHz LQFP-208 | ST
STM32F769BIT6

STM32F769BIT6 - Cortex-M7 MCU 2MB Flash 216MHz LQFP-208 | ST

The STMicroelectronics STM32F769BIT6 is a high-performance ARM Cortex-M7 32-bit RISC microcontroller with FPU and DSP instructions, operating at up to 216 MHz and delivering 462 DMIPS / 1082 CoreMark performance, packaged in a 208-pin LQFP (28x28 mm). It integrates 2 MB of Flash and 512 KB of SRAM, with an additional 16 KB instruction cache plus 16 KB I-cache for tight-memory code acceleration, making it one of the most capable Cortex-M7 MCUs in the STM32F7 family. What is a Cortex-M7 microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, Flash program memory, SRAM data memory, and a wide set of on-chip peripherals such as ADCs, timers, communication controllers and GPIOs. The ARM Cortex-M7 is the highest-performance core in the Cortex-M family, featuring a 6-stage superscalar pipeline, branch prediction, single/double-precision FPU, and tightly-coupled memories. It targets DSP-rich applications, advanced HMI graphics, and high-speed data acquisition where a Cortex-M4/M33 would lack throughput. The STM32F769BIT6 sits in the high-end tier of the STM32 line (LDO → microcontroller → embedded processor → semiconductor). Key features include an integrated Chrom-ART Accelerator 2D graphics engine, a hardware JPEG codec, dual QSPI/OctoSPI interfaces for external Flash expansion, a TFT-LCD controller up to WXGA, three 12-bit ADCs (2.4 MSPS each), two 12-bit DACs, USB 2.0 OTG FS + HS with on-chip PHY, Ethernet MAC, SDMMC, CAN, I2C, SPI/I2S, UART/USART, and a cryptographic/hash accelerator. The LQFP-208 package exposes up to 168 GPIOs and offers ample headroom for parallel-display, camera (DCMI), and SDRAM-bus expansion designs. Typical applications include advanced HMI panels with TFT-LCD and touch, industrial control and PLC front-ends, smart-home gateways, barcode scanners and label printers, audio DSP front-ends with the SAI/DFSDM peripherals, motor-control FOC platforms, and point-of-sale terminals. The wide peripheral set makes the STM32F769BIT6 a frequent choice when engineers need both graphics and deterministic real-time behavior in a single MCU. When designing with this part, pay attention to the BYPASS_REG and VCAP pins: the integrated SMPS step-down regulator of the F7 series requires two external capacitors on each VCAP pin for the 1.1V core rail, and the BYPASS_REG pin must be tied correctly to select internal-regulator or external-supply mode. Decoupling should follow ST's AN4661 guidance (multiple 100 nF plus bulk 4.7 µF per supply rail). This page synthesizes distributor pricing, drop-in LQFP-208 alternatives from ST and cross-brand options, and engineering-grade selection notes that complement - but do not replace - the manufacturer datasheet.

Запрос цены Контакты
STM32F769IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics
STM32F769IGT6

STM32F769IGT6 - 216MHz Cortex-M7 MCU, 1MB Flash | STMicroelectronics

The STMicroelectronics STM32F769IGT6 is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU and DSP instructions, integrating 1 MB of Flash and 340 + 256 KB SRAM in a 176-pin LQFP (24x24 mm) package. The Cortex-M7 core delivers up to 216 MHz clock speed with 462 DMIPS and supports single-precision floating-point, double-precision FPU, and full DSP/MPU instruction set for signal processing workloads. What is a Cortex-M7 microcontroller? The Cortex-M7 is Arm's highest-performance microcontroller core for embedded applications, designed for real-time control and DSP. It sits in the hierarchy as: Cortex-M7 -> ARM Cortex-M family -> 32-bit MCU -> microcontroller -> semiconductor. The STM32F7 series integrates this core with large SRAM, hardware graphics (Chrom-ART accelerator, JPEG codec), and rich connectivity, making it suitable for high-end HMI, audio, and motor control. Key features of the STM32F769IGT6 include: 1 MB Flash with dual-bank architecture for live firmware upgrades, up to 2 MB external memory expansion via FMC (Flexible Memory Controller), 16-bit ADCs (up to 3 MSPS), two CAN 2.0B interfaces, USB OTG full-speed + USB OTG high-speed with on-chip HS PHY, two SDMMC interfaces, TFT-LCD controller, and the Chrom-ART graphics accelerator. The 176-LQFP exposes the maximum peripheral set of the F7 series, including 8-bit/16-bit FSMC, SAI audio interfaces, and SPDIF-Rx. Architecturally, the STM32F769IGT6 uses an advanced 90 nm process with an adaptive real-time ART Accelerator that delivers zero-wait-state execution from Flash at full 216 MHz. Multi-layer AHB/APB bus matrix, 16 DMA streams with FIFOs, and a dedicated DMA2D engine for image data transfer accelerate data movement. The MCU operates at 1.7-3.6 V with selectable LDO/SMPS regulator (BYPASS_REG pin) and includes a real-time clock, watchdog, and SysTick. Primary applications are high-end human-machine interface (HMI) panels, smart-home gateways, motor drives, professional audio, point-of-sale terminals, and embedded graphics with TFT-LCD + touch. The integrated TFT-LCD controller and JPEG codec remove the need for an external graphics MCU in many designs. Design consideration: the LQFP-176 package is large (24x24 mm) and requires careful PCB layout for the high-speed USB HS, SDMMC, and external memory interfaces. Use impedance-controlled traces for USB and RMII, and isolate analog/digital grounds. This page synthesizes distributor pricing, drop-in same-package alternatives (STM32F767IIT6 with 2 MB Flash, STM32F765IGT6), and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты
STM32F769NIH6 - 2MB Flash 216MHz ARM Cortex-M7 MCU | STMicroelectronics
STM32F769NIH6

STM32F769NIH6 - 2MB Flash 216MHz ARM Cortex-M7 MCU | STMicroelectronics

The STMicroelectronics STM32F769NIH6 is a high-performance ARM Cortex-M7 microcontroller operating at up to 216 MHz, delivering 462 DMIPS/2.14 DMIPS/MHz, with 2 MB of dual-bank Flash and 512 KB of SRAM in a 216-pin TFBGA (13x13 mm) package. It supports 1.7V to 3.6V supply and -40C to +85C industrial temperature range, integrating a TFT LCD controller, hardware JPEG codec, and Chrom-ART Accelerator for graphics-rich applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit that combines a processor core, Flash/SRAM memory, and programmable I/O peripherals on a single die, governing a defined operation in an embedded system. The STM32F769NIH6 belongs to the STM32F7 series within the broader STM32 family of 32-bit Flash microcontrollers. The hierarchy STM32F769 -> STM32F7 -> STM32 -> ARM Cortex-M7 places it in the high-performance tier with DSP extensions and a single-precision floating-point unit (FPU). Cortex-M7 MCUs are the preferred choice for real-time signal processing, motor control, advanced audio, and rich human-machine interface (HMI) systems that require both computational density and connectivity. Key features include the Chrom-ART Accelerator for offloading 2D DMA2D operations (up to 10x faster than software rendering), a TFT LCD controller supporting up to XGA resolution, a hardware JPEG codec, and a cryptographic acceleration unit. The device exposes 168 GPIO across multiple ports, four I2C, six SPI, four USART/UART, three CAN, two SAI audio interfaces, one SDMMC, two USB 2.0 OTG (HS+FS), and two Ethernet MAC controllers. External memory bus (FMC) supports SDRAM, SRAM, NOR, and NAND for large frame buffers and code overlays. The 40nm process technology provides a balanced performance-per-watt profile for industrial embedded designs. Technically, the STM32F769NIH6 includes the Cortex-M7 core with single-precision FPU, a memory protection unit (MPU), DSP instruction set, true random number generator (TRNG), real-time clock (RTC), and 12-bit ADCs/DACs. Two 12-bit DACs, three 12-bit ADCs, and seventeen timers (including 32-bit and 16-bit) enable precise motor control and audio synthesis. The external memory interface (FMC) supports PSRAM, NOR Flash, NAND Flash, and SDRAM, enabling up to 32-bit external buses with multiplexing. Typical applications include high-end consumer electronics, industrial HMI panels, point-of-sale terminals, medical devices, audio processing subsystems, motor drives, and IoT gateways. The STM32F769NIH6 is particularly well-suited for smart home control panels and industrial displays where its graphics acceleration, JPEG codec, and Ethernet/USB connectivity deliver a complete platform. When designing with this device, ensure proper decoupling with 100nF capacitors placed close to each VDD pin, and provide a 25 MHz HSE oscillator and a 32.768 kHz LSE crystal for RTC. For USB HS and Ethernet, route the differential pairs with 90-dpi impedance and use the internal PLL to derive 48 MHz. Hold NRST low during power-up and ensure VDD is applied before VDDA per datasheet sequencing guidelines. This page synthesizes distributor pricing, drop-in alternatives from the same STM32F7 family, and practical design notes not aggregated on manufacturer product pages.

Запрос цены Контакты