Интегральные схемы

PIC32MZ2064DAB288-I/4J

PIC32MZ2064DAB288-I/4J - 200MHz 32-Bit MCU, 2MB Flash, LFBGA-288 | Microchip

The Microchip PIC32MZ2064DAB288-I/4J is a high-performance 32-bit MIPS32 microAptiv microcontroller operating up to 200 MHz, integrating 2 MB Flash and 640 KB SRAM in a 288-ball LFBGA (15x15 mm) package. It is part of the PIC32MZ DA graphics family and is engineered for MPU-class graphical user interface (GUI) applications with on-chip DDR2 DRAM controller, integrated Graphics Controller, and dedicated Graphics Processor. A microcontroller (MCU) is a single integrated semiconductor device that combines a processor, memory (Flash and SRAM), and programmable I/O peripherals on one die. The PIC32MZ DA family occupies the high-performance tier of 32-bit MCUs, above Cortex-M4 class devices and approaching application processor territory, specifically by embedding a Graphics Processing Unit (GPU) and external DRAM interface that are normally only found on application processors. Key features of the PIC32MZ2064DAB288-I/4J include: 2 MB on-chip program Flash (2M x 8), 640 KB SRAM, integrated DDR2 DRAM controller supporting up to 32 MB or 128 MB external addressable DDR2, hardware Graphics Controller with GPU for accelerated display rendering, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, Hi-Speed USB 2.0 with integrated PHY, two CAN 2.0b modules, up to 120 general-purpose I/O pins, an operating voltage range of 1.7 V to 3.6 V, and an industrial operating temperature grade of -40 C to +85 C. The MIPS32 microAptiv core uses a 5-stage pipeline with DSP extensions and a single-cycle MAC unit, delivering 1.79 DMIPS / MHz or roughly 362 DMIPS at 200 MHz. The integrated Graphics Controller supports TFT LCD panels with parallel RGB, and the Graphics Processor offloads rendering of fonts, sprites, alpha blending, color conversion, and JPEG decode so the CPU is free for application logic. The DDR2 DRAM controller (16-bit interface, up to 200 MHz) provides the large framebuffer bandwidth demanded by QVGA and VGA-class displays. Typical applications include graphical human-machine interface (HMI) panels for industrial automation, medical patient monitors with color TFT LCD, automotive infotainment displays, point-of-sale terminals, smart-home control panels, and any embedded GUI with animated icons, alpha blending, or large frame buffers. The combination of on-chip 2 MB Flash, 640 KB SRAM, and DDR2 expansion gives designers headroom for full graphical stacks (e.g. emWin, Microchip Graphics Library) plus application code. Designers should route DDR2 traces as 50 ohm microstrip with matched length within 0.10 inch, place 0.1 uF + 10 uF decoupling on every VDD/VBAT pin, and provide four-layer PCB with a stitched ground plane beneath the LFBGA. The LFBGA-288 requires via-in-pad or via-near-pad PCB technology and X-ray inspection on production boards. This page synthesizes distributor pricing across DigiKey, LCSC, JLCPCB and Microchip Direct, pin-compatible same-footprint LFBGA-288 alternatives, and practical PCB design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ2064DAB288T-I/4J

PIC32MZ2064DAB288T-I/4J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip PIC32MZ2064DAB288T-I/4J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DA family, operating at 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 288-pin LFBGA (15x15 mm) package. It is engineered for embedded applications where MPU-class throughput is required but MCU-grade simplicity is preferred, delivering up to 200 MHz single-core MIPS performance with integrated DDR2 DRAM controller, Graphics Controller and Graphics Processor, and a 12-bit 18 MSPS ADC with up to 45 analog inputs. A PIC microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals onto one die; the PIC32MZ DA family specifically extends this concept toward GUI and human-machine-interface workloads by adding a graphics pipeline, external DDR2 memory interface, and high-throughput analog/digital conversion. Within the broader hierarchy, this part sits as a microcontroller -> embedded controller -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ DA series -> DAB288 sub-family with 2 MB Flash. Key features include a 32-bit MIPS32 core at 200 MHz, 2 MB Flash program memory, 640 KB SRAM, support for up to 32 MB or 128 MB external DDR2 DRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog channels, plus CAN and High-Speed USB peripherals. The on-chip FPU and DSP extensions enable signal-processing workloads, while the DDR2 interface removes the need for an external memory controller companion chip in mid-density designs. The BGA package maximizes peripheral pin-out (288 balls) for designs that require extensive GPIO, parallel display buses, and multiple serial interfaces at full quota. Typical applications of the PIC32MZ DA family include industrial-grade HMI panels, automotive infotainment displays, medical patient-interface screens, point-of-sale camera, IoT gateways with LCD display, and audio player. The integrated graphics controller eliminates an external GPU in many cost-sensitive GUI designs, while the high-throughput ADC simplifies mixed-signal data acquisition. When designing with this device, allocate careful attention to BGA fan-out routing and thermal management - the LFBGA package benefits from at least 4 PCB layers and a ground flood under the device to spread heat. The DDR2 controller needs matched-length routing and reference-VPC decoupling; Microchip's MPLAB Harmony graphics project framework is recommended for board-level bring-up.

Запрос цены Контакты

PIC32MZ2064DAG169-I/6J

PIC32MZ2064DAG169-I/6J - 200MHz 32-Bit Graphics MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAG169-I/6J is a high-performance 32-bit MIPS32 microAptiv microcontroller operating at up to 200 MHz (330 DMIPS), integrating 2 MB of Flash program memory, 640 KB of SRAM, and an integrated Graphics Controller with on-chip DDR2 DRAM support (32 MB or 128 MB options) for advanced GUI and HMI designs. Housed in a 169-ball LFBGA (11x11 mm) package, this PIC32MZ DA family member combines MPU-class compute with MCU simplicity, targeting industrial control, automotive dashboards, medical graphical interfaces, and IoT edge gateways that demand rich graphics and fast deterministic response. A 32-bit MCU is a microcontroller whose CPU datapath, registers, and ALU are 32 bits wide, enabling it to execute large data payloads, complex control loops, and graphical workloads that exceed the throughput of 8-bit or 16-bit devices. Within the Microchip PIC32 family hierarchy, the PIC32MZ DA Graphics sub-family sits above the PIC32MX family (basic connectivity) and below the PIC64 family, occupying the high-end graphics tier. The DA sub-family in particular adds an integrated graphics LCD controller and stacked DDR2 DRAM, eliminating the need for an external memory controller on most HMI boards. Key features include a 12-bit, 18 MSPS, 45-channel ADC module for high-speed mixed-signal acquisition, a Memory Management Unit for embedded RTOS execution, dual-panel Flash for live firmware update with zero downtime, and Hardware Cryptography accelerators supporting AES, SHA, and RNG. Communication peripherals cover USB 2.0 High-Speed with PHY, CAN 2.0B, Ethernet MAC, six UART/I2C/SPI controllers, plus a 16-bit Parallel Master Port for external displays. Architecturally the device combines a superscalar MIPS32 microAptiv core with dedicated 2D graphics engine, DDR2 PHY, and Crypto engine on a single die, allowing the MCU to drive WXGA-resolution TFT panels while maintaining 100+ MHz CPU headroom for application code. The 11x11 mm BGA footprint supports routing for both SDRAM and RGB/LVDS display signals, critical for compact HMI boards. Typical applications include industrial HMI panels, smart-home control hubs, medical patient monitoring displays, automotive infotainment clusters, graphical IoT edge nodes, and point-of-sale terminals. When designing with this part, ensure the four DDR2 power rails (VDD, VDDQ, VPP, VREF) are decoupled per the reference design; use the Hardware Crypto engine only when the RTOS scheduler is configured to isolate cryptographic tasks from display refresh to prevent graphical jitter. This page synthesizes distributor pricing (DigiKey, Mouser, Arrow, Octopart as of 2026-10-09), drop-in alternative MPNs, and pin-compatibility notes not consolidated on any single manufacturer page.

Запрос цены Контакты

PIC32MZ2064DAG169T-I/6J

PIC32MZ2064DAG169T-I/6J - 200MHz MCU 2MB Flash LFBGA-169 | Microchip

The Microchip Technology PIC32MZ2064DAG169T-I/6J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, built on the MIPS32 microAptiv core running at 200 MHz and delivering 330 DMIPS of processing throughput. It integrates 2 MB of Flash and 640 KB of SRAM, packages the GPU-friendly graphics peripherals, and stacks an external 32 MB or 128 MB addressable DDR2 memory die in the same 169-ball LFBGA (11x11) package to feed high-resolution displays. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals on one die; the PIC32MZ DA family occupies the upper end of the MCU spectrum, often competing with entry-level MPUs for graphics workloads. Within the broader hierarchy it sits as: PIC32MZU -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC, and it is one of Microchip's premier choices for human-machine-interface applications. Key features include dual-panel Flash for live firmware update support, a 12-bit 18 MSPS 45-channel ADC, a dedicated Memory Management Unit for embedded OS execution, a 2-D channel for display pipeline acceleration, and a crypto engine (RNG/AES/SHA) on selected variants. The device supports parallel RGB/memory interfaces for direct LCD connection and includes Hi-Speed USB, Ethernet, CAN-FD, and multiple SPI/I2C/UART instances for system connectivity. The architecture pairs the MIPS32 microAptiv core with a tightly-coupled LCD DMA path, allowing full-screen GUI rendering at WXGA resolution without CPU bottleneck. Internal stacked DDR2 eliminates the need for an external SDRAM chip on the PCB, reducing BOM cost and EMI. Typical applications include industrial HMI panels, automotive dashboards, home appliance color touch interfaces, medical patient monitors, point-of-sale terminals, and any GUI-rich embedded product where the BOM stack must remain compact. When designing with this part, allocate PCB ground return paths under the BGA, follow Microchip's DDR2 layout checklist, and confirm thermal budget using the package's junction-to-ambient resistance. This page synthesizes distributor pricing, drop-in alternatives, application notes, and design trade-offs not found in the manufacturer datasheet alone, giving engineers and procurement teams a faster path from spec to order.

Запрос цены Контакты

PIC32MZ2064DAG176-I/2J

PIC32MZ2064DAG176-I/2J - 200MHz 32-Bit MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAG176-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Graphics (DA) family, featuring the MIPS32 microAptiv core running at 200 MHz with up to 330 DMIPS of computational throughput. It integrates 2 MB of dual-panel Flash memory and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed thermal pad, enabling GUI-rich embedded designs with MPU-class performance. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on one die. PIC32MZ DA devices sit in the high-performance tier of the PIC32 family, alongside the EF (Ethernet) and EC (connectivity) sub-families, and are designed for applications that require large memory footprints, real-time graphics, and connectivity stacks. The DA series specifically adds an integrated Graphics LCD controller and a DDR2 external memory interface that can address 32 MB or 128 MB of external DDR2, distinguishing it from EF/EC variants that lack a GPU. Key specifications include 2 MB (2M x 8) of Flash supporting live update via dual-panel architecture, 640 KB of SRAM, an integrated 12-bit 18 MSPS 45-channel ADC, USB-HS, Ethernet MAC, SD card host, CAN, and a 2D Graphics Processing Unit (GPU) for accelerating GUI rendering. The wide memory map and Memory Management Unit (MMU) support embedded operating systems such as FreeRTOS, OpenRTOS, and Micrium OS, while microMIPS compressed mode reduces code size by up to 35% compared to standard MIPS32 instruction encoding. Architecturally, the PIC32MZ2064DAG176-I/2J uses a superscalar microAptiv core with hardware multiply/divide and a tightly-coupled peripheral bridge. The dual-panel Flash subsystem allows a firmware image to run from one panel while the other is being reprogrammed, enabling field firmware updates without downtime. The integrated GPU and LCD controller support resolutions up to WVGA with hardware-accelerated rendering, offloading pixel-pushing from the CPU. Typical applications include industrial HMI panels, automotive instrument clusters, medical patient monitors, point-of-sale terminals, smart home control panels, and graphical IoT gateways. The wide 1.8 V core / 3.3 V I/O supply and 176-pin LQFP footprint simplify PCB layout for designs that previously required a discrete MPU plus external SDRAM. When designing with this part, ensure the DDR2 interface is impedance-controlled and length-matched per JEDEC specifications; place a 1.8 V LDO close to the core supply pins and bulk-decouple every power rail. Microchip recommends considering the pin-compatible PIC32MZ2064DAR176 variant for new designs where extended commercial availability is required. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond what the manufacturer datasheet provides, helping engineers and procurement teams make informed decisions.

Запрос цены Контакты

PIC32MZ2064DAG176T-I/2J

PIC32MZ2064DAG176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAG176T-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ DA family, based on the MIPS32 microAptiv core running up to 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It is engineered for human-machine interface (HMI) and graphical applications, combining MPU-class compute density with MCU-class integration. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (UART, SPI, I2C, ADC, timers, GPIO). It sits within the hierarchy CPU -> microprocessor -> microcontroller -> embedded computing -> semiconductor. The PIC32MZ DA family further extends this with on-chip graphics controllers (GPU-less LCD controller + 2D drawing engine), external DDR2 memory addressing up to 128 MB, and 10/100 Ethernet MAC - enabling advanced GUI designs without external graphics co-processors. Key differentiating features include the 200 MHz MIPS32 microAptiv core delivering up to 330 DMIPS / 1.65 DMIPS per MHz, dedicated graphics peripherals including a 2D Graphics Processing Unit (GPU) and Parallel Master Port (PMP) for direct LCD drive, on-chip 32 MB DDR2-ready address space, dual USB 2.0 high-speed OTG controllers, and integrated 10/100 Ethernet MAC with MII/RMII interfaces. The 176-pin LQFP package exposes up to 120 GPIO and supports operating voltages of 1.8 V core / 3.3 V I/O with industrial -40C to +85C temperature range. Typical applications include industrial HMI panels, graphical touch-screen controllers, medical user-interface boards, building-automation control panels, multi-protocol IoT gateways, and graphics-rich embedded control products. The combination of large memory, high-speed connectivity, and on-chip graphics makes it a drop-in MCU for products that previously required a separate MPU plus discrete LCD controller. When designing with this part, pay attention to the decoupling network (1 uF + 100 nF + 10 nF bulk) near the exposed thermal pad, layout of the DDR2 interface for signal integrity, and the JTAG trace length for reliable programming/debugging. The -I/2J suffix indicates industrial temperature grade and 176-pin LQFP tape-and-reel packaging. This page synthesizes real distributor pricing, verified drop-in alternatives from Microchip's 32MZ DA family, and practical design notes not collected in any single source - giving engineers a single consolidated reference for sourcing PIC32MZ2064DAG176T-I/2J.

Запрос цены Контакты

PIC32MZ2064DAH169-I/6J

PIC32MZ2064DAH169-I/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA

The Microchip Technology PIC32MZ2064DAH169-I/6J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, built around the MIPS32 microAptiv core running at 200 MHz (330 DMIPS) and housed in a 169-ball LFBGA (11x11 mm) package. It integrates 2 MB Flash, 640 KB SRAM, and on-chip DDR2 controller supporting 32 MB or 128 MB externally addressable DDR2, providing MPU-class memory bandwidth for graphics workloads. Key features include a 12-bit, 18 MSPS, 45-channel ADC module with analog comparators and a high-speed USB 2.0 high-speed PHY, along with dual panel Flash for live update support and a memory management unit (MMU) for embedded OS execution. The microMIPS mode yields up to 35% smaller code footprint, and integrated graphics peripherals (GPU, display controller, DDR2 interface) simplify HMI design. The architecture combines a 5-stage pipeline MIPS32 core with dedicated 2D graphics engine and TFT/panel interface hardware, enabling smooth GUI rendering without external graphics controllers. DDR2 memory support via the integrated controller removes the need for external SDRAM chips, reducing BOM and board area while delivering sufficient bandwidth for full-HD framebuffer manipulation. Typical applications include industrial HMI panels, automotive dashboards, medical patient monitors, smart-home control displays, and embedded GUI products. The combination of microAptiv performance, 2 MB Flash, 640 KB SRAM and integrated DDR2 enables 32-bit OS execution (FreeRTOS, embOS, MPLAB Harmony) plus rich graphical interfaces. When designing with this MCU, use MPLAB X IDE and MPLAB Harmony framework for driver and middleware integration. The LFBGA package requires X-ray inspection and 4-layer PCB minimum; ensure thermal vias under the exposed pad and verify impedance-controlled traces for DDR2 signal integrity. This page synthesizes distributor pricing, drop-in alternatives, application notes, and practical design considerations not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ2064DAH176-I/2J

PIC32MZ2064DAH176-I/2J - 200MHz MCU, 2MB Flash, GPU, DDR2 | Microchip

The Microchip Technology PIC32MZ2064DAH176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz with 330 DMIPS, integrated 2D graphics processing unit (GPU), and DDR2 memory controller in a 176-pin LQFP (20x20 mm) package. It integrates 2 MB Flash (Dual Panel for live update support), 640 KB SRAM, and an on-chip DDR2 SDRAM controller addressing up to 128 MB externally. The -I suffix indicates the industrial temperature grade, and the /2J suffix indicates tray packaging. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory, data memory, and peripherals. The PIC32MZ DA family targets the unique niche of GUI and graphics applications with MCU simplicity, providing MPU-like performance while retaining the deterministic interrupt response and ease-of-use expected of a microcontroller. Within the broader taxonomy, this device sits as: 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ DA series -> graphics-enabled MCU -> embedded system component. Key features include a 12-bit, 18 MSPS, 45-channel ADC module, hardware crypto engine, USB-HS, Ethernet, SD card, CAN, GPU, and XLP (eXtreme Low Power) technology. The MMU (Memory Management Unit) supports optimum embedded OS execution (Linux/RTOS), and microMIPS mode reduces code size by up to 35%. Per the Microchip product page, Microchip recommends considering the PIC32MZ2064DAS176 for new designs, suggesting the DAH176 is being maintained for existing designs. Typical applications include human-machine interface (HMI) and industrial display controllers, point-of-sale (POS) terminals, home appliance control panels, medical patient monitors, and automotive infotainment graphic subsystems. The integrated GPU offloads 2D drawing operations from the CPU, freeing cycles for application logic, and the DDR2 controller eliminates external SDRAM glue logic. Designers must provision adequate PCB area beneath the LQFP for thermal dissipation, follow the Microchip DDR2 routing guidelines for the SI-length group, and ensure decoupling per the manufacturer's reference design. The /2J suffix denotes tray packaging, so for high-volume automated assembly, consider the /T (tape and reel) variant instead. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not aggregated in a single manufacturer datasheet.

Запрос цены Контакты

PIC32MZ2064DAH176T-I/2J

PIC32MZ2064DAH176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAH176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA graphics microcontroller IC running at 200 MHz, equipped with 2 MB (2M x 8) of Flash and 640 KB of SRAM, and housed in a 176-pin LQFP (20x20) package with an exposed thermal pad. The part integrates a 12-bit 18 MSPS ADC, a hardware Crypto engine, a Graphics Processing Unit (GPU), High-Speed USB, Ethernet, CAN, and an external DDR2 DRAM controller capable of addressing up to 128 MB externally. An LQFP-176 (Low-profile Quad Flat Package) microcontroller is a surface-mount IC package with 176 gull-wing leads on a 20 mm x 20 mm body and an exposed pad for thermal dissipation; it sits inside the broader LQFP package family -> QFP family -> surface-mount IC packaging hierarchy. PIC32MZ DA-series devices are positioned between conventional MCUs and MPUs, providing MPU-like graphics performance while retaining the deterministic peripheral set of a microcontroller. Key features of the PIC32MZ2064DAH176T-I/2J include a single-core MIPS32 microAptiv core with FPU, hardware crypto acceleration, an integrated LCD controller, up to 45 analog inputs for the 12-bit ADC, an HS USB 2.0 PHY on-chip, and a DDR2 DRAM controller that supports 32 MB or 128 MB external memories. The device supports an operating voltage of 2.2V to 3.6V, industrial-grade temperature range of -40C to +85C, and 200 MHz operation with hardware FPU and DSP extensions. The PIC32MZ DA architecture pairs a high-throughput MIPS32 core with a dedicated graphics pipeline, allowing up to WQVGA or higher resolutions to be rendered without taxing the application CPU. DDR2 memory support up to 128 MB enables frame buffer expansion for rich graphical user interfaces, and the integrated crypto engine supports AES, DES, 3DES, SHA, and HMAC acceleration for secure applications. Typical applications include industrial HMI panels with resistive or capacitive touch, automotive dashboard and cluster displays, point-of-sale terminals, medical patient monitors, and home-automation controllers. The combination of HS USB, Ethernet, and CAN peripherals also suits the part for industrial-control gateway products that must bridge multiple fieldbuses. When designing with the PIC32MZ2064DAH176T-I/2J, pay close attention to DDR2 routing: the external memory bus has strict length-matching and impedance requirements, and the reference clock must be filtered. Microchip recommends using MPLAB Harmony v3 and the PIC32MZ DA BSP for peripheral stacks. This page synthesizes distributor pricing, drop-in PIC32MZ DA family alternatives, and practical design notes that complement the manufacturer datasheet without copying it.

Запрос цены Контакты

PIC32MZ2064DAK169-I/HF

PIC32MZ2064DAK169-I/HF - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAK169-I/HF is a high-performance 32-bit MIPS microAptiv microcontroller integrating 2MB Flash, 640KB SRAM, an integrated Graphics Controller and Graphics Processor, and an on-chip externally addressable DDR2 DRAM controller (32MB or 128MB), housed in a 169-pin LFBGA (11x11 mm) package. An MCU (Microcontroller Unit) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals (ADC, timers, communication controllers) on one die. The PIC32MZ DA family sits in the high-performance tier of Microchip's PIC32 portfolio, delivering MPU-like throughput while keeping the ease-of-use and deterministic interrupt model of an MCU. Within the broader taxonomy, PIC32MZ DA belongs to: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> graphics-enabled MCU. Key features include a 200 MHz / 330 DMIPS MIPS32 microAptiv core with microMIPS mode (up to 35% smaller code), 2MB dual-panel Flash for live firmware update, a 12-bit 18 MSPS ADC with up to 45 analog inputs, a dedicated Graphics Processing Unit (GPU) and LCD controller supporting WQVGA and larger panels, HS USB 2.0, CAN, and a high-bandwidth DDR2 SDRAM interface. The integrated DDR2 controller lets designers attach up to 128MB of external SDRAM without an external memory controller, simplifying board layout for graphical HMI designs. Architecturally, the device combines the microAptiv core with a 128-bit-wide Flash bus for zero-wait-state execution at 200 MHz, a Memory Management Unit (MMU) for embedded OS support, and dedicated 2D graphics hardware that offloads rendering from the CPU. The dual-panel Flash subsystem supports live firmware updates - one panel runs application code while the other receives the new image, then a fail-safe swap boots the new firmware. Typical applications include industrial graphical HMI terminals, automotive infotainment clusters, medical patient monitors with color TFT displays, smart-home control panels, and point-of-sale terminals. The integrated graphics pipeline lets developers drive TFT LCDs up to WQVGA without an external graphics controller. When designing with the PIC32MZ2064DAK169-I/HF, allocate 4-layer PCB routing for the DDR2 interface to meet length-matching and impedance requirements, follow Microchip application note AN1338 for DDR2 layout, and provide a bulk + bypass capacitor network on every AVDD/AVSS pair used by the 18 MSPS ADC to preserve SNR. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and design engineers a single reference for evaluating the PIC32MZ DA family.

Запрос цены Контакты

PIC32MZ2064DAK169-V/HF

PIC32MZ2064DAK169-V/HF - 200MHz 32-bit Graphics MCU | Microchip

The Microchip Technology PIC32MZ2064DAK169-V/HF is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller designed for advanced graphical user interface (GUI) applications. It integrates 2 MB of Flash and 640 KB of SRAM on-chip, with support for 32 MB or 128 MB of external DDR2 DRAM (family-level option). The device operates at up to 200 MHz and is housed in a 169-pin LFBGA (11x11 mm) package, in the -40C to +105C industrial/automotive-grade temperature range (per the V/HF suffix). What is a PIC32MZ Graphics MCU? A PIC32MZ microcontroller is a 32-bit MIPS-based MCU family from Microchip Technology (semiconductor manufacturer) that combines MPU-class computational throughput with the deterministic peripherals and ease of use of an MCU. PIC32MZ Graphics (DAK/DAL/DAR/DAS) family parts add an integrated 2D Graphics Controller and Graphics Processing Unit (GPU), enabling rich HMI rendering on TFT LCD panels without an external graphics coprocessor. The hierarchy is: PIC32MZ -> MIPS32 microAptiv core -> 32-bit MCU -> embedded microcontroller -> integrated circuit. Key features include a 12-bit 18 MSPS ADC with up to 45 analog inputs, High-Speed USB 2.0 (HS USB) with on-chip transceiver, CAN 2.0b, plus the integrated GPU and Graphics LCD Controller. The 2 MB Flash and 640 KB SRAM satisfy the storage and framebuffer needs of advanced GUIs with assets, fonts, and animations. The 200 MHz MIPS32 microAptiv core delivers MPU-class throughput. On the architecture, the microAptiv core is single-core (no SMP), with integrated FPU, MMU, and prefetch cache. DDR2 DRAM is driven by an external memory controller, while on-die SRAM is split between general-purpose and dedicated graphics/USB buffers. The 169-LFBGA (11x11) package provides ample I/O for parallel RGB display output and quadrature encoder input. Typical applications include automotive infotainment HMIs, industrial machine control panels with color TFT, medical patient monitors, point-of-sale terminals, and home appliance HMI. The graphics acceleration and large framebuffer simplify development of icon, slider, and animation UIs without an external GPU. When designing with the PIC32MZ2064DAK169-V/HF, ensure DDR2 DRAM traces are length-matched and impedance-controlled per the Microchip schematic checklist. Provide a low-jitter 24 MHz crystal reference for USB and DDR2, and follow the package's PCB land pattern and thermal dissipation guidance. This page synthesizes distributor pricing, drop-in alternatives from the same 169-LFBGA Graphics family, and practical design notes that go beyond the manufacturer datasheet summary.

Запрос цены Контакты

PIC32MZ2064DAK169T-I/HF

PIC32MZ2064DAK169T-I/HF - 200MHz 32-bit MCU w/ 2MB Flash & Graphics | Microchip

The Microchip Technology PIC32MZ2064DAK169T-I/HF is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DAK) family, built on the MIPS32 microAptiv core running at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package. The device combines MPU-class performance with MCU-class ease of design for graphical user interface (GUI) applications, pairing a 32-bit CPU with an Integrated Graphics Controller and dedicated Graphics Processor (GPU) that offloads rendering and animation workloads from the main CPU. A microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including ADCs, communication interfaces, and timers. High-performance 32-bit MCUs like the PIC32MZ DA family blur the traditional boundary between MCUs and microprocessors (MPUs) by integrating external memory controllers, graphics engines, and large memory footprints on-chip, enabling compact single-chip GUI solutions without an external application processor. Key features of the PIC32MZ2064DAK169T-I/HF include on-chip support for 32 MB or 128 MB externally addressable DDR2 DRAM, an integrated 12-bit 18 MSPS ADC with up to 45 analog inputs, a High-Speed USB 2.0 interface, CAN, and a Peripheral Pin Select (PPS) system that allows flexible function remapping across I/O pins. The 5V-tolerant digital I/O with up to 32 mA source/sink, combined with selectable open-drain, pull-up, pull-down, and slew-rate control, makes it well suited to mixed-voltage industrial designs. Class B Safety Library support (IEC 60730) and AEC-Q100 Grade 1 qualification (-40C to +125C) target safety-critical and automotive-grade embedded systems. Architecture-wise, the PIC32MZ DA series uses a Harvard-style memory topology, dual IPU/DMA engines, and a hardware 2D graphics accelerator that supports alpha blending, alpha masking, color-keying, and image decompression. This makes the device a single-chip solution for HMI designs that previously required an external MPU plus a separate LCD controller. Typical applications include industrial HMI touch panels, automotive instrument clusters, medical patient monitors, smart-home control panels, point-of-sale (POS) terminals, and avionics displays. Compared to the older PIC32MX series, the DA family offers roughly 5x the CPU performance, integrated DDR2 memory support, and a much richer graphics pipeline. When designing with this device, ensure proper power-supply sequencing for the DDR2 interface (VDD, VDDR, VDDIO rails) and follow Microchip's recommended decoupling scheme. Thermal management is generally modest at industrial duty cycles, but high GUI workloads at 200 MHz require attention to the LFBGA PCB layout to maintain junction temperature within specifications. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical HMI design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ2064DAK169T-V/HF

PIC32MZ2064DAK169T-V/HF - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2064DAK169T-V/HF is a 200 MHz MIPS32 microAptiv PIC32MZ DAK 32-bit microcontroller with 2MB program Flash and an integrated graphics controller, housed in a 169-pin LFBGA (11x11 mm) package. It delivers MPU-class performance with MCU-class design simplicity for advanced human-machine interface (HMI) and graphical applications, combining 2MB Flash, 640KB SRAM, and on-chip DDR2 DRAM controller support for up to 128 MB of external DDR2 memory. A 32-bit microcontroller (MCU) is an integrated processor that combines a CPU core, program and data memory, and a rich set of on-chip peripherals in a single IC. Within the broader taxonomy, this PIC32MZ DAK device sits under the high-performance MCU category, above general-purpose 8/16-bit MCUs and below application processors (MPUs). It belongs to the MIPS32 microAptiv family, which is positioned for connected, low-power, and graphics-rich embedded systems that demand deterministic real-time performance. Key features include a 200 MHz CPU core, integrated graphics controller with hardware graphics processor for accelerated GUI rendering, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, dual CAN interfaces, Hi-Speed USB 2.0, and Peripheral Pin Select (PPS) for flexible function remapping. 5V-tolerant GPIO with up to 32 mA source/sink, Class B Safety Library support (IEC 60730), and AEC-Q100 Grade 1 qualification make it suitable for safety-critical and automotive-grade deployments. Architecturally, the device pairs the MIPS32 microAptiv core with dedicated on-chip controllers (DDR2 DRAM, Graphics, HS USB) and a 12-bit high-speed ADC pipeline. The 169-LFBGA package is required to expose the high GPIO and parallel display count needed for TFT-driven graphical HMIs. Typical applications include automotive instrument clusters and HMI panels, industrial control HMIs with TFT-LCD displays, point-of-sale (POS) terminals, and medical device graphical interfaces. The wide ADC channel count also suits multi-sensor data acquisition front-ends. When designing with this part, allocate adequate PCB area for the 11x11 mm BGA fanout and ensure DDR2 routing follows the datasheet's impedance and length-matching guidance. The Graphics Processor offloads the CPU for high-frame-rate GUIs, so prioritize the dedicated display interface pins during board layout. This page synthesizes distributor pricing across six sources, drop-in PIC32MZ DAK-family alternatives, and application-focused design notes that go beyond the manufacturer datasheet summary.

Запрос цены Контакты

PIC32MZ2064DAK176-I/2J

PIC32MZ2064DAK176-I/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

The Microchip PIC32MZ2064DAK176-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, integrating 2MB of Flash, 640KB of SRAM, and a 200MHz MIPS32 microAptiv core in a 176-pin LQFP (20x20mm) exposed-pad package. The 'K' suffix indicates the largest Flash variant (2MB) in the DA graphics family, paired with the integrated DDR2 DRAM controller that can address up to 128MB of external DDR2 memory, eliminating the need for an external memory bus controller in graphics-rich designs. The integrated graphics controller and graphics processor deliver MPU-like performance with MCU design simplicity, enabling full GUI implementations without an external graphics chip. The PIC32MZ DA family sits within the broader taxonomy of 32-bit microcontrollers -> MIPS microAptiv architecture -> PIC32 family -> PIC32MZ Graphics sub-family. These microcontrollers target applications that previously required a microprocessor plus companion ICs, because the device integrates a 200MHz core, large SRAM, hardware graphics acceleration, and an external DDR2 controller on a single die. The Graphics Processing Unit (GPU) accelerates 2D drawing operations such as line, rectangle, and circle rendering, plus alpha-blended overlays, freeing the CPU to handle application logic. Key features include 2MB Flash program memory (2M x 8), 640KB SRAM (640K x 8), an integrated DDR2 DRAM controller supporting 32MB or 128MB externally addressable memory, a 32-bit MIPS32 microAptiv core running at 200MHz, and an integrated graphics controller with hardware-accelerated primitives. Communication peripherals include USB 2.0 High-Speed with PHY, dual CAN, Ethernet MAC, multiple UART/SPI/I2C channels, and a 12-bit ADC. The 120 I/O pins support capacitive touch sensing and parallel bus expansion. Typical applications include industrial human-machine interface (HMI) panels, point-of-sale terminals, medical patient monitors, automotive infotainment displays, and smart-home control panels with TFT LCD touchscreens. Designers benefit from MPLAB Harmony ecosystem, which provides free graphics libraries, middleware, and example projects for accelerated GUI development. When designing with this device, ensure the DDR2 memory is laid out per Microchip's routing guidelines; incorrect impedance matching or trace length mismatch will degrade DDR2 throughput. Plan power sequencing carefully: VDDIO must ramp before VDDCORE to prevent latch-up. Use the exposed thermal pad with a continuous ground plane for thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Запрос цены Контакты

PIC32MZ2064DAK176-V/2J

PIC32MZ2064DAK176-V/2J - 200MHz 32-bit MCU, 2MB Flash, Graphics Controller, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAK176-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, delivering MPU-class performance with MCU-style integration for graphical user interface (GUI) designs. The device integrates 2MB of Flash program memory, 640KB of SRAM, and runs at a core clock speed of 200 MHz, all housed in a 176-lead LQFP (20x20 mm) surface-mount package. The "V" suffix denotes a -40C to +105C operating temperature range and the "/2J" indicates tray packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a rich set of peripherals. The PIC32MZ DA series sits in the hierarchy 32-bit MCU -> MIPS32 microAptiv core -> PIC32 family -> PIC32MZ Graphics sub-family -> integrated Graphics Controller + DDR2 DRAM controller. These MCUs replace multi-chip MPU-plus-DRAM-plus-controller solutions by collapsing graphics, memory control, and deterministic real-time control into one die. Key features include the on-chip integrated Graphics Controller with up to 128MB externally addressable DDR2 DRAM (32MB on-chip option available in this family), an integrated Graphics Processing Unit (GPU) with hardware-accelerated alpha blending, gradients, and image rendering, plus a comprehensive peripheral set including USB 2.0 high-speed OTG, two CAN 2.0b ports, 10/100 Ethernet MAC, HS USB, multiple SPI/I2C/UART interfaces, and a 12-bit ADC. The device supports parallel TFT/pixel interfaces for direct display drive. A 32KB instruction cache and 32KB data cache hide DDR2 latency while the microAptiv core handles DSP-style arithmetic. Typical applications include industrial human-machine interfaces (HMIs), point-of-sale (POS) terminals, medical patient monitors, automotive infotainment, smart home control panels, and any embedded GUI requiring high-resolution color graphics, multi-touch responsiveness, and real-time control loops. The integrated DDR2 controller eliminates an external memory bridge; the integrated graphics engine eliminates an external LCD controller chip, reducing BOM cost and PCB area. When designing with this MCU, pay close attention to DDR2 PCB routing (matched-impedance, length-matched byte lanes, proper VREF and VTT termination), supply decoupling near the integrated LDO regulator pins, and pin-mux configuration through PPS (Peripheral Pin Select). The -V temperature grade supports industrial and outdoor installations. For software, MPLAB Harmony v3 provides the Graphics Composer library and 2D driver layer that exercises the integrated controller directly. This page synthesizes distributor pricing, drop-in alternatives, and PCB design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ2064DAK176T-I/2J

PIC32MZ2064DAK176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAK176T-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, based on the MIPS32 microAptiv core and packaged in a 176-pin LQFP (20x20 mm). The device runs at 200 MHz and integrates 2 MB of Flash and 640 KB of SRAM, making it suitable for graphics-rich embedded designs that demand MPU-class performance with MCU-class simplicity. A 32-bit microcontroller (MCU) is a programmable processor that integrates CPU, memory, and peripherals on a single silicon die. Within the broader hierarchy, this device sits as MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ family -> Power Management IC family tree -> semiconductor. The DA sub-family specifically adds an integrated Graphics Controller, Graphics Processor, and a DDR2 DRAM controller that can address up to 128 MB of external DDR2 memory, removing the need for an external memory controller in GUI applications. Key features of the PIC32MZ2064DAK176T-I/2J include 200 MHz core speed with 1.56 DMIPS/MHz, 2 MB Flash, 640 KB SRAM, DDR2 DRAM interface supporting 32 MB or 128 MB externally addressable memory, an integrated 2D Graphics Controller and Graphics Processor for hardware-accelerated rendering, and a full set of connectivity peripherals including USB, Ethernet, CAN, SPI, I2C and UART. The 176-pin LQFP package exposes 51 general-purpose I/O lines and multiple analog/digital peripherals such as ADC, comparators, and timers. From an architecture perspective, the PIC32MZ DA family combines a high-speed MIPS32 microAptiv core with tightly coupled SRAM, dedicated DMA channels, and an L1 cache subsystem. The integrated DDR2 controller and graphics pipeline reduce external component count, while the 200 MHz operation with hardware multiply/divide and DSP extensions accelerates image manipulation and HMI rendering in real time. Typical applications include industrial HMI panels, automotive instrument clusters, point-of-sale terminals, medical user interfaces, smart-home control panels, and any embedded GUI requiring smooth graphics on a single chip. The wide peripheral set also makes it a strong choice for connected industrial gateways. When designing with this device, ensure proper DDR2 PCB layout (length-matched traces, controlled impedance) and adequate decoupling near the 176 LQFP power pins. Use the MPLAB Harmony framework and the PIC32MZ DA BSP for DMA, DDR2 and graphics driver initialization.

Запрос цены Контакты

PIC32MZ2064DAK176T-V/2J

PIC32MZ2064DAK176T-V/2J - 200MHz Graphics MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAK176T-V/2J is a 32-bit MIPS32 microAptiv-based PIC32MZ DAK family microcontroller running at 200 MHz, integrating 2 MB Flash and 640 KB SRAM with a dedicated Graphics Controller, on-chip 32 MB (DAK variant) externally addressable DDR2 DRAM, and a 176-pin HLFQFP (20x20 mm) LQFP package. The part suffix T indicates tape-and-reel packaging and V/2J denotes the -40C to +105C automotive/V-grade temperature range. The integrated graphics pipeline enables HMI/GUI designs on a chip without external GPU silicon. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals; the PIC32MZ DAK series occupies the high-performance graphics tier of this category (MCU -> 32-bit MCU -> graphics-enabled MCU -> HMI controller -> embedded system SoC). Compared to a general-purpose MCU, the PIC32MZ DAK family adds a hardware graphics controller and DDR2 DRAM interface, simplifying parallel-display designs. Key features include the 32-bit MIPS32 microAptiv core with I/D-cache, MIPS DSP ASE extensions, 2 MB Flash with ECC, 640 KB SRAM, hardware graphics processor with TFT/LCD controller, six 4-wire SPI modules (up to 50 MHz), SQI configurable as additional SPI (up to 80 MHz), six UART modules (25 Mbps with LIN 2.1 and IrDA support), two CAN 2.0B modules with DeviceNet addressing, five I2C modules (up to 1 Mbaud) with SMBus support, a Parallel Host Port (PMP), and Peripheral Pin Select (PPS) for flexible pin function remapping. Two CAN modules each have a dedicated DMA channel for low-overhead bus traffic. The device targets advanced HMI/GUI applications - industrial touch panels, automotive dashboards, medical patient monitors, home-automation control screens, and point-of-sale terminals - where parallel or parallel connections, the integrated TFT controller and DDR2 framebuffer remove the need for an external GPU and reduce BOM cost. The 200 MHz core plus 2 MB video hardware targets the right performance bracket for WVGA-class displays. When designing with this part, plan PCB layout for DDR2 signals first - controlled impedance, matched lengths, and proper decoupling dominate signal integrity. Use MPLAB Harmony 3 to configure the graphics middleware (GFX) and the DDR2 DRAM controller for your panel. For cost-down swaps within the same family, refer to the PIC32MZ2064DAH176 (DAG/DAB/DAA are BGA variants) and PIC32MZ2064DAS176 (DAS = on-chip 128 MB DRAM, the larger-DRAM cousin). This page synthesizes distributor pricing, drop-in alternatives within the same VQFPH-FP-176 package, MPLAB Harmony configuration notes, and automotive-grade selection guidance not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ2064DAL169-I/HF

PIC32MZ2064DAL169-I/HF - 200MHz 32-bit MCU 2MB Flash LFBGA-169 | Microchip

The Microchip PIC32MZ2064DAL169-I/HF is a high-integration 32-bit MIPS microAptiv PIC microcontroller in the family MAC's PIC32MZ Graphics (DAK/DAL/DAR/DAS) line, offering up to 200 MHz core speed, 2 MB of Flash, and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package. The device integrates an on-chip Graphics Controller and Graphics Processor, an external DDR2 DRAM interface (up to 32 MB or 128 MB addressable), a 12-bit 18 MSPS ADC with up to 45 analog inputs, USB 2.0 High-Speed, CAN, and 120 digital I/O lines. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory (Flash), data memory (SRAM), and a wide range of peripherals such as ADC, timers, communication controllers, and GPIOs. PIC32MZ DAL devices sit at the high end of Microchip's PIC32 line, with 32-bit MIPS cores and peripherals aimed at GUI designs, industrial HMI, and audio/video processing. Within the broader taxonomy they are members of the embedded microcontroller family -> 32-bit microcontroller -> graphics-enabled MCU -> semiconductor. Key features of the PIC32MZ2064DAL169-I/HF include 2 MB Flash for code and graphics assets, 640 KB SRAM for frame buffers, a 12-bit 18 MSPS ADC supporting up to 45 analog channels, an integrated Graphics Processing Unit (GPU) with dedicated DDR2 controller, and a peripheral set that includes High-Speed USB 2.0, two CAN modules, multiple SPI/I2C/UART channels, and up to 9 PWM outputs. The card runs at up to 200 MHz with MIPS32 microAptiv instructions, delivering MPU-class performance while remaining programmable as a single-chip MCU. In terms of architecture, the device couples a single-core MIPS32 microAptiv with a parallel GPU/display pipeline. The integrated DDR2 controller supports up to 32 MB on-chip or 128 MB externally addressable memory, freeing the main bus for CPU-bound tasks. The 12-bit 18 MSPS ADC is suitable for general analog sensing, while the graphics block accelerates JPEG decoding, alpha blending, and LCD/3D rendering without burdening the CPU. Key applications include industrial control HMI panels, medical patient monitors, automotive infotainment clusters, point-of-sale terminals, and graphics-rich embedded products. The wide peripheral mix and DDR2 memory support make it ideal for systems with TFT LCDs needing fast image processing. Design tip - the LFBGA-169 package requires careful PCB design with matched-impedance routing and proper DDR2 trace length matching for reliable high-speed operation. This page synthesizes distributor stock and pricing, drop-in alternative MCUs from the PIC32MZ family, and practical design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ2064DAL176-I/2J

PIC32MZ2064DAL176-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAL176-I/2J is a high-performance 32-bit microcontroller from the PIC32MZ Graphics (DA) family, featuring a MIPS32 microAptiv core running at 200 MHz, 2 MB of internal Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package. According to DigiKey listing data, the part integrates 2 MB of program memory, 640 KB of data RAM, and a 32-bit single-core microAptiv processor targeted at GUI and graphics-rich embedded applications. The DAL176 device supports an operating voltage range of 1.7V to 1.9V (1.8V typical) and provides up to 120 general-purpose I/O pins for peripheral expansion. A 32-bit microcontroller (MCU) is a microprocessor integrated with Flash memory, RAM, peripherals, and I/O on a single die. MCUs form the lowest tier in the embedded computing hierarchy: microcontroller -> embedded processor -> SoC -> computing platform. The PIC32MZ DA family specifically bridges the gap between traditional microcontrollers and application processors by integrating a graphics controller, graphics processor, and DDR2 DRAM controller on-chip, delivering MPU-like performance with the ease-of-design of an MCU. This integration reduces BOM cost and PCB area for HMI designs versus discrete CPU + external controller solutions. Key features of the PIC32MZ2064DAL176-I/2J include a 200 MHz core clock, hardware FPU for single/double-precision math, 32 KB I-cache and 32 KB D-cache, integrated 2D graphics processing unit (GPU) and graphics LCD controller supporting resolutions up to WXGA, and on-chip DDR2 DRAM controller for up to 128 MB external addressable memory. Peripherals include USB 2.0 High-Speed OTG, CAN 2.0B, Ethernet MAC, HS PMP/PSP, multiple I2C/SPI/UART, and a 12-bit ADC at 500 ksps. The 176-LQFP package exposes all peripherals across 120 I/O pins with ample signal integrity margin for high-speed interfaces. Architecturally, the device uses a 5-stage pipeline microAptiv core with branch prediction, MMU, and DSP extensions, enabling real-time signal processing alongside control tasks. The DDR2 interface allows frame buffers and large graphical assets to be stored in low-cost external DRAM, while deterministic Flash execution and tightly-coupled RAM support latency-critical ISR code paths required by industrial HMI and automotive cluster designs. Typical applications span industrial HMI panels, home appliance GUIs, automotive instrument clusters, medical patient monitors, point-of-sale terminals, and aviation cockpit displays. The integrated graphics pipeline eliminates the need for external GPU silicon in mid-resolution TFT panels up to 7-10 inches. When designing with this device, allocate a 4-layer PCB with dedicated ground planes for the DDR2 interface to maintain signal integrity above 200 MHz. Use Microchip's MPLAB Harmony configurator and the PIC32MZ DA Starter Kit reference designs to accelerate firmware bring-up. Ensure the 1.8V core rail is sequenced before the DDR2 supply to prevent bus contention. This page synthesizes distributor stock levels, drop-in same-package variants from the PIC32MZ DA family, and practical hardware design notes not consolidated on the manufacturer product page.

Запрос цены Контакты

PIC32MZ2064DAL176-V/2J

PIC32MZ2064DAL176-V/2J - 200MHz 32-Bit Graphics MCU | Microchip

The Microchip Technology PIC32MZ2064DAL176-V/2J is a high-performance 32-bit microcontroller from the PIC32MZ DA (Display, Audio) family, based on the MIPS32 microAptiv core running up to 200 MHz. It integrates 2 MB of Flash and 640 KB of SRAM, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus CAN and Hi-Speed USB on-chip peripherals, all housed in a 176-pin LQFP (20x20 mm) package. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and peripheral interfaces onto one silicon die. The PIC32MZ DA family sits at the upper end of Microchip's MCU portfolio, targeting applications that traditionally required an MPU plus external peripherals. It belongs to the system hierarchy: microcontroller -> embedded controller -> semiconductor. Compared with simpler Cortex-M0+ class devices, parts like the PIC32MZ DA deliver MPU-class throughput, on-chip DDR2 DRAM controller support, and a dedicated graphics pipeline that simplifies GUI development. Key differentiating features of this part include: 200 MHz core clock with hardware multiply/divide and DSP extensions, integrated 2D Graphics Processing Unit (GPU) with hardware-accelerated rendering, up to 45 analog channels on the 12-bit 18 MSPS ADC, dual CAN 2.0b controllers, Hi-Speed USB 2.0 with on-chip transceiver, and a parallel external bus interface supporting 32 MB or 128 MB of external DDR2 DRAM. The LQFP-176 footprint (20x20 mm) exposes 142 GPIO-capable pins, leaving ample headroom for parallel display, touch, and storage expansion. The part is built on a low-power CMOS process and includes multiple low-power modes (Sleep, Idle, Doze) plus a wide operating voltage range of 1.7 V to 1.9 V core with 3.3 V I/O. The graphics pipeline accelerates blit, fill, and alpha-blend operations in hardware, offloading the CPU from framebuffer manipulation and freeing it for application logic. Typical applications include industrial HMI panels, automotive instrument clusters, point-of-sale terminals, medical patient monitors, and any embedded GUI requiring smooth animations at WVGA or higher resolutions. The integrated ADC and CAN peripherals also suit sensor aggregation and vehicle body controllers. When designing with this part, plan pin assignments early: the parallel graphics bus, external memory bus, and ADC inputs compete for the same GPIO. Use the MPLAB Harmony 3 configuration tool to manage peripheral multiplexing and clock trees. Provide bulk decoupling on the 1.8 V core rail and the 3.3 V I/O rail to keep switching noise out of the analog inputs. This page synthesizes distributor pricing, drop-in alternatives, application recommendations, and practical design notes that go beyond the manufacturer datasheet, supporting faster component selection and design-in decisions.

Запрос цены Контакты

PIC32MZ2064DAL176T-V/2J

PIC32MZ2064DAL176T-V/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

The Microchip Technology PIC32MZ2064DAL176T-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAL microcontroller operating at 200MHz, integrating 2MB Flash and 640KB SRAM in a 176-pin LQFP (20x20mm) package. It belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, offering MPU-class performance with MCU design simplicity for graphical HMI and industrial applications. What is a PIC32MZ DAL microcontroller? The PIC32MZ DAL is part of Microchip's PIC32 family of MIPS32 microAptiv-based microcontrollers that combine high processing performance with rich peripheral integration. In the broader taxonomy, it sits at: PIC32MZ DAL -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The 'DAL' suffix denotes an integrated graphics controller with DDR2 DRAM interface support, positioning this MCU between traditional microcontrollers and application processors. Key features include a 200MHz core with 32-bit data path, 2MB internal Flash, 640KB SRAM, integrated Graphics Controller and Graphics Processor, up to 45 analog inputs via a 12-bit 18 MSPS ADC, CAN and HS USB interfaces, and on-chip DDR2 controller supporting 32MB or 128MB external DRAM. The device operates from industrial-grade temperature ranges suitable for harsh environments. Architecturally, the PIC32MZ2064DAL176T-V/2J uses the MIPS32 microAptiv core with DSP extensions, a multi-layer bus matrix for parallel peripheral access, and dedicated hardware blocks for pixel rendering. The DDR2 controller eliminates the need for external SDRAM memory ICs for frame buffering, while the integrated GPU accelerates 2D rendering operations. Typical applications include graphical human-machine interfaces (HMIs) with TFT LCD displays, industrial control panels, automotive infotainment head units, medical patient monitoring displays, smart home control hubs, and IoT edge gateways with local visualization. The combination of high CPU performance, integrated graphics, and DDR2 support enables sophisticated UIs on a single chip. When designing with this device, allocate PCB area for the 176-pin LQFP (20x20mm) footprint with sufficient clearance for DDR2 routing (length-matched traces, controlled impedance). Use Microchip's MPLAB Harmony software framework and Graphics Suite to leverage the integrated peripherals efficiently. This page synthesizes distributor pricing, drop-in same-family alternatives, application examples, and practical design notes that complement the manufacturer datasheet and MPLAB Harmony documentation.

Запрос цены Контакты

PIC32MZ2064DAR169-I/6J

PIC32MZ2064DAR169-I/6J - 200MHz 32-bit Graphics MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2064DAR169-I/6J is a high-performance 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller running at 200 MHz with 2 MB of Flash and integrated graphics peripherals, housed in a 169-pin LFBGA (11x11 mm) package. The part operates from 1.8V/3.3V rails and provides 640 KB of SRAM, an integrated Graphics Controller and Graphics Processor, an on-chip 32 MB or 128 MB externally addressable DDR2 DRAM interface, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus HS USB and CAN. What is a 32-bit microcontroller? A 32-bit microcontroller (MCU) is an embedded processor with a 32-bit data path, register file, and address space, allowing it to handle larger data words, more complex firmware, and richer peripheral sets than 8-bit or 16-bit MCUs. In the taxonomy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> graphics MCU -> PIC32MZ DAR family. The PIC32MZ DAR line targets graphical HMI and TFT-display applications that previously required an MPU plus external graphics controller. Key features include the integrated DDR2 memory controller that offloads external SDRAM management from firmware, the 12-bit 18 MSPS ADC that simultaneously samples multiple analog inputs, the hardware graphics pipeline that accelerates TFT-LCD refresh, and HS USB plus CAN for industrial and automotive connectivity. The 169-LFBGA package enables a small 11x11 mm footprint despite the high pin count. The PIC32MZ2064DAR169 architecture combines a MIPS32 microAptiv core with tightly coupled SRAM, a multi-channel DMA controller, and a dedicated Graphics Processing Unit. Hardware crypto and a true RNG are available on the DA1 sub-family for secure applications, while the 200 MHz core delivers up to 330 DMIPS and 1.66 DMIPS/MHz. Typical applications include industrial HMI panels, medical patient monitors, automotive cluster displays, IoT gateways with TFT-LCDs, and POS terminals. The device is also suited for graphical IoT edge nodes that need local display rendering without an MPU. When designing with this MCU, allocate careful PCB layout for the LFBGA and DDR2 interface - use matched-length traces and reference-controlled impedance. Plan boot-time DDR2 training and configure the integrated charge-pump regulator before enabling the LCD panel. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ DAR family, and practical layout notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ2064DAR176-I/2J

PIC32MZ2064DAR176-I/2J - 32-bit 200MHz MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2064DAR176-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller operating at 200 MHz with 2 MB of Flash and 640 KB of on-chip SRAM, integrating an external 32 MB DDR2 DRAM interface and a hardware Graphics Controller plus Graphics Processor. It is housed in a 176-pin LQFP (20x20 mm) industrial-temperature package with 120 user I/O lines. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance CPU core, on-chip memory, peripherals, and interrupt controllers into one IC. The PIC32MZ DA family specifically targets graphical HMI applications by combining an MCU-style ease of design with MPU-class performance, occupying the hypernym hierarchy microcontroller -> 32-bit MCU -> MIPS MCU -> PIC32MZ family. The integrated DDR2 controller eliminates external memory chips, while the Graphics Controller and GPU accelerate pixel rendering on TFT displays without taxing the CPU. Key features include 200 MHz core clock, 2 MB Flash, 640 KB SRAM, stacked 32 MB external DDR2 DRAM, integrated Graphics Controller with 2D Graphics Processor, six UART, six SPI, six I2C, USB 2.0 high-speed OTG, two CAN 2.0b ports, Ethernet MAC, and a 12-bit 18 MSPS ADC. The 176-LQFP industrial-grade (-40C to +85C) package exposes 120 GPIO pins for high pin-count peripherals and parallel display buses. Architecturally, the part uses the MIPS32 microAptiv core with DSP extensions, dual IPU/IOMUX engines for flexible pin assignment, and a dedicated DDR2 PHY capable of 533 MHz data rate. The graphics subsystem includes blit/composite hardware for hardware-accelerated UI rendering. Power is managed through multiple low-power modes and a wide 2.6V-3.6V operating range. Typical applications include industrial HMI panels, automotive instrument clusters, medical graphical terminals, point-of-sale terminals, and home automation touch panels. The integrated DDR2 and GPU make it ideal for GUI designs on TFT LCDs from QVGA to XGA resolution. When designing with this MCU, allocate sufficient PCB area for the DDR2 routing (controlled impedance, length matching, and VREF decoupling), and provide a clean 3.3V supply with bulk + bypass capacitors per Microchip's DDR2 reference design. This page synthesizes distributor pricing, same-family drop-in alternatives, and DDR2 routing design notes not found in the manufacturer datasheet alone.

Запрос цены Контакты

PIC32MZ2064DAR176-V/2J

PIC32MZ2064DAR176-V/2J - 32-bit 200MHz MCU, 2MB Flash, LQFP-176 | Microchip

The Microchip PIC32MZ2064DAR176-V/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAR graphics microcontroller running at 200 MHz, integrating 2 MB of Flash, 640 KB of SRAM, and a stacked 32 MB or 128 MB DDR2 DRAM in a 176-pin LQFP (20x20 mm) package. The V-temp grade variant targets industrial temperature ranges, while the device itself targets MPU-class GUI performance with the ease of an MCU design flow. What is a PIC32MZ DAR microcontroller? The PIC32MZ DAR belongs to the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family of 32-bit microcontrollers from Microchip Technology. This product family sits within the hierarchy MIPS32 microAptiv core -> 32-bit MCU -> PIC32 family -> Microchip 8/16/32-bit MCU portfolio -> embedded microcontroller. The DAR sub-family specifically integrates a stacked DDR2 memory die on-package, eliminating the need for an external DRAM chip and PCB routing for high-speed memory, which simplifies 4-layer and 6-layer PCB layouts. Key features include the integrated Graphics Controller and Graphics Processor, hardware accelerated GUI rendering, 12-bit ADC and DAC peripherals, high-speed USB, Ethernet, CAN, and multiple SPI/I2C/UART interfaces. The 200 MHz core delivers up to 330 DMIPS and 3.28 CoreMark/MHz, and the device includes FPU and DSP extensions for signal processing. The 640 KB SRAM combined with on-package DDR2 (32 MB or 128 MB options in the family) provides ample framebuffer memory for TFT LCD graphical user interfaces. The device's stacked DDR2 dramatically simplifies board design by eliminating high-speed parallel DRAM routing, reducing EMI and signal integrity issues. The on-die Graphics Processor offloads rendering tasks from the main CPU, freeing cycles for application logic. The integrated DDR2 controller supports both 16-bit and 32-bit DDR2 memories with refresh and training handled in hardware. Typical applications include industrial HMI touchscreens, medical patient monitors, home automation control panels, automotive infotainment displays, and point-of-sale terminals. The integrated DDR2 and graphics engine make it especially suitable for color TFT displays with rich graphics overlays where BOM cost and PCB complexity must be minimized. When designing with this MCU, ensure proper thermal management at the 200 MHz operation since dynamic power scales with frequency. Use the MPLAB Harmony framework for driver and middleware integration, and consult the PIC32MZ DA Graphics (DAK/DAL/DAR/DAS) Family datasheet for DDR2 layout guidelines, including controlled impedance and length-matched traces for stable operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone, including cross-package and cross-temperature-grade comparisons that help procurement and engineering teams make informed selection decisions.

Запрос цены Контакты

Подкатегории

Товары (38.000+)

PIC32MZ2064DAB288-I/4J - 200MHz 32-Bit MCU, 2MB Flash, LFBGA-288 | Microchip

PIC32MZ2064DAB288T-I/4J - 200MHz 32-bit MCU 2MB Flash | Microchip

PIC32MZ2064DAG169-I/6J - 200MHz 32-Bit Graphics MCU, 2MB Flash | Microchip

PIC32MZ2064DAG169T-I/6J - 200MHz MCU 2MB Flash LFBGA-169 | Microchip

PIC32MZ2064DAG176-I/2J - 200MHz 32-Bit MCU, 2MB Flash, 176-LQFP | Microchip

PIC32MZ2064DAG176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

PIC32MZ2064DAH169-I/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA

PIC32MZ2064DAH176-I/2J - 200MHz MCU, 2MB Flash, GPU, DDR2 | Microchip

PIC32MZ2064DAH176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

PIC32MZ2064DAK169-I/HF - 200MHz 32-bit MCU 2MB Flash | Microchip

PIC32MZ2064DAK169-V/HF - 200MHz 32-bit Graphics MCU | Microchip

PIC32MZ2064DAK169T-I/HF - 200MHz 32-bit MCU w/ 2MB Flash & Graphics | Microchip

PIC32MZ2064DAK169T-V/HF - 200MHz 2MB Flash 32-bit MCU | Microchip

PIC32MZ2064DAK176-I/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

PIC32MZ2064DAK176-V/2J - 200MHz 32-bit MCU, 2MB Flash, Graphics Controller, 176-LQFP | Microchip

PIC32MZ2064DAK176T-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

PIC32MZ2064DAK176T-V/2J - 200MHz Graphics MCU 2MB Flash | Microchip

PIC32MZ2064DAL169-I/HF - 200MHz 32-bit MCU 2MB Flash LFBGA-169 | Microchip

PIC32MZ2064DAL176-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

PIC32MZ2064DAL176-V/2J - 200MHz 32-Bit Graphics MCU | Microchip

PIC32MZ2064DAL176T-V/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP

PIC32MZ2064DAR169-I/6J - 200MHz 32-bit Graphics MCU, 2MB Flash | Microchip

PIC32MZ2064DAR176-I/2J - 32-bit 200MHz MCU, 2MB Flash, 176-LQFP | Microchip

PIC32MZ2064DAR176-V/2J - 32-bit 200MHz MCU, 2MB Flash, LQFP-176 | Microchip